Providing Furniture For Panchayat Samiti South Solapur Tal S Solapur Dist Solapur- 1 Providing internalcement plaster 12mm thick in single coat in CM 1:5 without neeru finish,to concrete, or brick srfaces in all positions including scafolding and curing etc. complete. 2 Providingand laying Polished machine cut KothaStone slabs 20mm to 25mm th for treads and risers of steps and staircases with rounded nosing for the treads on a bed of 1:4 CMincluding cementfloat , filling joints, with neat cemnet slurry, curing , polisheing and cleaning complete. 3 Providing and laying in position flooring of telephone black/amba/white/cat barry brown/RBI red/ Ocean brown Granite stone of approved shade and size 18mm to 20mm thick on a bed of 1:6 c.m. including cement float stricking joint pointting in cm 1:3 curing and cleaning etc. complete. 4 Providingand layingVitrified matt finish decorative type tile of size 590*605*590mm to 605mm of 8 to 10mm thickness and confirming IS-15622-2006 (GROUP BLA.) of approved make shadde and pattern for flooring in required position laid on bed of 1:4 cement mortor including neat cement float, filling joint curing and cleaning etc. complete. 5 Providingand layingVitrified matt finish decorative type tile of size 590*605*590mm to 605mm of 8 to 10mm thickness and confirming IS-15622-2006 (gROUP bLA.) of approved make shadde and pattern for Dado and Skirtting in required position laid on bed of 1:4 cement mortor including neat cement float, filling joint curing and cleaning etc. complete. 6 Providingand layingCeremic tiles of kajaria/nitco/Asian or equivalant make having size 30cm*30cm and confirming I:S 15622/2,006(Group B II A) For Flooring in required position laid on bed of 1:4 cement mortor including neat cement float, filling joint curing and cleaning etc. complete. 7 Providingand layingCeremic tiles of kajaria/nitco/Asian or equivalant make having size 30cm*30cm and confirming I:S 15622/2,006(Group B II A) For Dado and skirtting in required position laid on bed of 1:4 cement mortor including neat cement float, filling joint curing and cleaning etc. complete. 8 Providing and laying telephone blck/amba white/catbary brown/RBI Red/ Ocean brown granite stone of 18 to 20mm thick for dado frame/dado/ window boxing etc. on cm 1:6 including filling joint with polymer base filler noissing the sharp edges wherever necessary curing etc. complete. 9 Providing and Fixing 30 MM thick BOTH SIDE PRELAMINATED SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of M.S tubes of 19 guage thickness and, size 19 x 19 mm for styles and 15 x15 mm for the top and bottom rails, M.S frame shall have a coat of metel primer of approved make and manufacture. M.S frame shall be covered with heat mouled PVC C channel made from 5 mm (+/0.25) thick prelaminated sheet of density 600 kg/cbm ,of size 30mm thickness 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45? angle on either side forming stiles ; and 5 mm thick ,95 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered in 45 on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered on both sides to form lock rail.Top,bottom and lock rail shall be provided either side of the panel. An additional 5 mm (+/0.25) thick PVC strip of 20 mm width is to be stuck on the bottom side of the c channel prelaminated paneling of 5 mm (+/0.25) thick PVC sheet to be fitted inside the M.S. frame welded/ sealed to the styles and rails with 5 mm (+/0.25) x 30 mm PVC sheet beading on either side and joined together with solvent cement adhesive etc ,10 mm thickness (5 mm (+/0.25) x 2 nos ) 20 mm wide cross PVC sheet as gap insert for the rail and bottom rail. Door to be fixed to frames with 3 nos M.S.powder coated but 10 Providing and fixing fiber glassed rainforced polyster door shutter (reframed 2006) without ventilkator including cromium llated fixture and fastening with cromium plated handle on both side etc. complete.A)30MM THICK. 11 Providing half round moulding(Full Moulding) to 18mm to 20mm granite stones including fine polishing and cleaing etc. complete. 12 Providing andapplying Washable oil bond distemper in two coat of approved colour and shade including scaffolding and prepairing the surface etc. complete. GF 13 Providing andapplying Washable oil bond distemper of approved colour and shade including scaffolding and prepairing the surface etc. complete.FF 14 Providing andapplying Washable oil bond distemper of approved colour and shade including scaffolding and prepairing the surface etc. complete. SF 15 Providing andapplying Washable oil bond distemper of approved colour and shade including scaffolding and prepairing the surface etc. complete. TF 16 Providing and applying two coats of exterior weather shieldpaint of approved manufacture and of approved colour to the plasteredurfaces including cleaning ,preparing the plastersurface applying primer coat ,scaffolding if necessary, andwatering the surface for two days etc complete. NOTE: For Item No. 15 to 18 prior approval of Superintending Engineer will be necessary GF 17 Providing and applying two coats of exterior weather shieldpaint of approved manufacture and of approved colour to the plasteredurfaces including cleaning ,preparing the plastersurface applying primer coat ,scaffolding if necessary, andwatering the surface for two days etc complete. NOTE: For Item No. 15 to 18 prior approval of Superintending Engineer will be necessaryFF 18 Providing and applying two coats of exterior weather shieldpaint of approved manufacture and of approved colour to the plasteredurfaces including cleaning ,preparing the plastersurface applying primer coat ,scaffolding if necessary, andwatering the surface for two days etc complete. NOTE: For Item No. 15 to 18 prior approval of Superintending Engineer will be necessary SF 19 Providing and applying two coats of exterior weather shieldpaint of approved manufacture and of approved colour to the plasteredurfaces including cleaning ,preparing the plastersurface applying primer coat ,scaffolding if necessary, andwatering the surface for two days etc complete. NOTE: For Item No. 15 to 18 prior approval of Superintending Engineer will be necessaryTF 20 Executive table @v 1800*900*750mm: Providing and fixing of table @ 1800L*900d*750Ht. Top and gable end to be made of memberen finish with soft water fail edges and curves pannel and decorated anodiesed section MODESTY Panel to be made of 18mm thick prelaminated particle board with PVC Edge bandas per drawing. 21 roviding and fixing of PEDESTAL / Table@ 420L* 450D*650Ht. To be made out of complete membrane consist of three drawer as per drawing . 22 Providing & FixingTable,Top 12mm thick ply AND All Vertical members are in 18mm thick ply . Drawers are Made in 12mm thick ply, edges of 20 mm thk., front side with frosted glass, ply work finished in laminate 1.5 mm thk. From outer side & inner side with 0.8 mm laminate with approved shade as per detailed drawing & design, with S.S. hardware like hinges, legs, finishing the wood work with polishing & 3 coats of painting wherevernecessary etc. complete. 23 Providing and fixing 18mm ply prtition with glass including mica on both side,Mlmimne polish frmes, teak wood frame also including glss, fevicol, nails screws and teak wood batten of 50*25mm etc. complete. 24 Full hight SteelStorage @ 750*450*2100HT : Providing and fixingOpenable steel storageof 750*450*2100ht. with adstable shelvees. complete body and shutter made in 0.8mm thick and top in 2mm thick crca,4 shutter to be mounted with the help of cup hingses and four adjestable levers,entire storage in powder coated finish with 60 to 80 Micron as per drawing . 25 Mediumhight Steel storage @ 750L*450D*1200Ht. : Providing and fixing openable steel storage of 750*450*1200mm. With two adjestable shelves complete body and shutter made in 0.8mm thick. And top in 2mm thick. CRCA 4 Shutterto be mounted with the help of cup hinges and 4 adjestable levelers, entier storage in powdrcoated finish with 60 to 80 micronsas per drawing. 26 Providing & fixing 18 mm, 12 mm & 6 mm thk. Commercial plywood of approved make for storage as per detail design & drg with externally finish with 1.0 mm thk. Approved laminate & internally 0.8 mm thk. Matt finish white laminate with necessary hardware, handles etc, complete. As per Directed 27 Providing and Arrengment of High back chair:- Tilt mechanisum with multy locking high density cussion on seat composit lather with metalic silver finish base and arm with P. U. Custers Gas lift for high adjestment. 28 ublic seating chair 3 Seater: Providing and fixing 3 seater public seating chaire made of complete matel with legs in crome finish and seates in silver powder coating finish. 29 Providing and fixing wooden top regular Teak wood Chaire for staff etc. complete. 30 Sofa set 3+1+1: Providing and fixing sofa set 3+1+1Brown and cream lather Daimention length 182.5*100*100mm and wight of 66 Kg seating capacity 5 Seats. 31 Dressing table 400L*400D*1800H:- Providing and fixing dressing table of size 400l*400*1800Ht. The dressing table unit is made up of 1mm thickprelam particle board with both side decorative laminatd all exposed edges are sealed with 2mm thick thick PVC Edg bandingetc. complete. 32 Providing and fixing Fiber chairs of Neelkmal brand for pulic / Visitors etc. complete 33 Providing and fixing frame work of galveniesed iron for Suspended false Celling witch includes G.T. Pertmeter channle of size 27mm and 0.5mm thich having one flange of 20mm and Another of 30mm along with perimeter of the celling. fixing in brick wall/ Partition with the help of Raval plugs and screws suspended GI intermediot channles of size 45mm and 0.9mm thick with two flanges of 15mm each from the soffit at 1200mm center with steel G.I. Hanger of width 25mm*05mm fastner celling section of 0.5mm thickness having corved wedge of 51.5mm and 2 flanges of 26mm each with lips of 10.5mm fixed to the intermediot channle with the help of conectting clips and in Direction perpendicular to the intermediot channle at 450mm centers 12.5mm dry walls , screws at 230mm ceneters fixing screws mechanicaly eightor with screw driver or drilling machine with suitable attachment etc. complete... 34 Providing and fixing false celling of teak wood particle board half Perforated sheet 12mm thick including scaffolding if necessary all iron work and two coat of oil Paintting to board and beddingi.e. visible surface etc. complete.(Excluding frame work of runner) 35 Providing and fixing Information sign board of size 0.90 X 0.60 m . Prepared on 16 guage M S Sheet with horizontal bracting of M S flat os size 25 X 6 mm uncluding painting with one coat of zinc cromzte primer and two coats oil painting including twonumber of M S angleiron post of size 50 X 50 X 6 mm of 2.70 m longincluding conveying all taxes fixing in ground with cement concrete 1:4:8 block of 45 X 45 X 45 cm size as directed by Engineer in charge stc. complete. 36 Determinationof resistance to Dry heat, determination of moisture content, determination of density and thickness of plywood etc. 37 Test of Glue Adhession etc. complete. 38 Test of Glue Adhession etc. complete. 39 Test of Compressive strength of mortor (1:5)etc. . complete. 40 Royalty of Sand etc. 41 Add GST charges etc.
