Tender For Estimate For Electrification At Village Bhairogarh Da-Juga Under Eshagarh D/Cestimate No. & Date :-21-292-120667-25-00001 Dt. 25-Apr-25, Stc No.: 01 Dt. 07.05.2025,O&M No. :-75365 Dt. 25.04.2025, Project No. :-217836 Estimate Amt.470427.24, ashoknagar-Madhya Pradesh

Estimate for electrification at village Bhairogarh DA-JUGA under Eshagarh D/cEstimate No. & Date :-21-292-120667-25-00001 Dt. 25-APR-25, STC No.: 01 dt. 07.05.2025,O&M No. :-75365 dt. 25.04.2025, Project No. :-217836 Estimate Amt.470427.24; 1 Provision- 11 kv line- 0.35 k.m., 11 kv DP- 01 no., 25 KVA DTR- 01 No.,LT line- 0.15 k.m. 2 140 Kg.,8.0 Mtrs. long PCC pole 3 140 kg. 8.0 mtr. Long PCC Pole erection-[Including Pit Digging- Base padding of pole by Stone Block/Pre cost Block, pole erection, back filling/boulder, earthing coil] 4 Transportation of 140 kg. 8.0 mtr. Long PCC Pole Including with Material Transportation from Area store Guna/Gwalior/Bhopal to working Site (0 to 50 KM.) (Per No. Per KM) as per RCA GUNA No.6981-82 Dt. 11.03.2024 (55 KM*Rs. 14.4/KM)=792/per Pole *11 No. 140 kg. 8.0 mtr. Long PCC Pole 5 (Rep-BGP) DTR 25 KVA 11/.04 KV BIS Certified LEVEL-II 6 11 KV D.O. Fuse Unit Polymer type 7 Labour for 11 KV D.O. Fuse Unit Polymer type 8 11 KV Pin Insulator Polymer Composit (5 KN) 9 Labour for 11 KV Pin Insulator Polymer Composit (5 KN) 10 11 KV Strain hardware (T&C type) fittings 11 11 KV(45KN) Composite Polymer Disc Insulators 12 Labour for 11 KV(45KN) Composite Polymer Disc Insulators 13 3 Pin 5A Socket (Two no. Piano type switch, Bulb Bakelite Holder with wiring & E 14 9 KV Gapless type(5 KA) polymer lightening arrestor 15 Labour for 9 KV Gapless type(5 KA) polymer lightening arrestor 16 AAAC Rabbit conductor 0.05 sq. inch. (55 sq.mm. Al.Eq.) 17 Stringing ofAAAC Rabbit conductor 0.05 sq. inch. (55 sq.mm. Al.Eq.) 18 Aluminium Binding wire and tape 19 Aluminium paint 20 Labour for Aluminium paint 21 Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) 22 Labour for Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) 23 Back filling of poles with boulders. 24 Bentonite compound powder 25 Bi-metallic clamps Distribution Transformers Bushing 26 Bi-metallic clamps suitable for 12mm dia stud and 80sqmm AAAC 27 Clamps for neutral for AB Cable 28 Labour for Clamps for neutral for AB Cable 29 Complete jumpering of DTR 30 Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay 31 Labour for Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay 32 Concreting of structures & foundation (1:3:6) 33 Labour for Concreting of structures & foundation (1:3:6) 34 Danger Boards Enamelled 11 KV 35 Labour for Danger Boards Enamelled 11 KV 36 Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire 37 Earthing for PCC Pole 4.00 mm-8 SWG G.I wire- 0.8 Kg, per pole 38 G.I. STRIP 25X3 MM1 39 Labour for G.I. STRIP 25X3 MM1 40 G.I. Wire 3.15 mm. (10 SWG) 41 G.I. WIRES 4.0 MM. (8 SWG) 42 Labour for G.I. WIRES 4.0 MM. (8 SWG) 43 G.I.Pipe 40 mm Dia C grade type 44 Labour for G.I.Pipe 40 mm Dia C grade type 45 Galvanized nut & bolt with washer 46 Jointing Sleeves suitable for Rabbit (55Sq.mm.Al. Eq. ) AAAC conductor 47 Galvanized pipe 25mm 48 LED Lamp with 9 Watt (Complete) 49 LT A B cable Suspension clamps (Galvanized) 50 Labour for LT A B cable Suspension clamps (Galvanized) 51 LT A.B Cable tension clamps (Galvanized) 52 Labour for LT A.B Cable tension clamps (Galvanized) 53 LT XLPE Arial Bunch XLPE Cable 3X25 + 1X16 + 1X25 Sq mm. with aluminium alloy bare messenger wire 54 Stringing ofLT XLPE Arial Bunch XLPE Cable 3X25 + 1X16 + 1X25 Sq mm. with aluminium alloy bare messenger wire 55 M.S.Nuts with Bolts 56 MCB of 16 Amp 57 METER BOARD 400X400X28 MM MADEUP OF FIBERGLASS REINFORCED POLYSTER IS:13410(1992) 58 Labour for METER BOARD 400X400X28 MM MADEUP OF FIBERGLASS REINFORCED POLYSTER IS:13410(1992) 59 Meter cum protection box for 25 KVA DTR 60 Labour for Meter cum protection box for 25 KVA DTR 61 Piercing connector Type-I for single/three phase (Main 16-50 sqmm tap-off 16-50 sqmm) 62 Labour for Piercing connector Type-I for single/three phase (Main 16-50 sqmm tap-off 16-50 sqmm) 63 Piercing connector Type-II (Main 16-50 sqmm tap-off 16-50 sqmm) 64 Labour for Piercing connector Type-II (Main 16-50 sqmm tap-off 16-50 sqmm) 65 PVC 2 CORE UN ARMOURED 2.5 SQMM ALUMINIUM CONDUCTOR 66 Stringing of PVC 2 CORE UN ARMOURED 2.5 SQMM ALUMINIUM CONDUCTOR 67 PVC/Rubber Bushes 68 Rack Bolt/Screw 69 Red oxide paint 70 Labour for Red oxide paint 71 Service Pipe Clamp 72 Shackle bolt with Clamp 73 Shackle Insulators 90X75 mm. 74 Single Phase Service connection box (Deep Drwan Metal Service Connection Boxes )with one incoming up to 25 mm2 and 8 no outgoing up to 10 mm2 with insulated multiple outgoing connector- 75 Labour for Single Phase Service connection box (Deep Drwan Metal Service Connection Boxes )with one incoming up to 25 mm2 and 8 no outgoing up to 10 mm2 with insulated multiple outgoing connector- 76 Single phase Electronic meter with data downloading facility & box 5-30 Amps. 77 Labour for Single phase Electronic meter with data downloading facility & box 5-30 Amps. 78 Stay Insulators 90X65mm 79 Stay set complete without Stay wire 16 mm. (Hot Dipped galvenised) 80 Labour for Stay set complete without Stay wire 16 mm. (Hot Dipped galvenised) 81 STAY WIRE 7/3.15 MM.(7/10 SWG) 82 Stay Wire 7/4.00 mm.(7/8 SWG) 83 Stone Block/Pre cast block for base pedding(450X450X75MM) 84 Switch Board 85 Three phase Static Energy meters 20-80 Amps.with L.S. & TOD Facility with box 86 Labour for Three phase Static Energy meters 20-80 Amps.with L.S. & TOD Facility with box 87 Wooden Board 10x8 88 XLPE Cable 1 core unarmoured 35 sqmm Aluminium conductor 1100 Volts 89 Stringing of XLPE Cable 1 core unarmoured 35 sqmm Aluminium conductor 1100 Volts 90 XLPE Cable 1 core unarmoured 70 sqmm Aluminium conductor 1100 Volts 91 Stringing ofXLPE Cable 1 core unarmoured 70 sqmm Aluminium conductor 1100 Volts 92 11 KV V cross-arms angle type (65x65x6 mm angle) 93 Labour for 11 KV V cross-arms angle type (65x65x6 mm angle) 94 11 KV Top clamps angle type65x65x6 mm 95 Labour for 11 KV Top clamps angle type65x65x6 mm 96 D.C. Cross arms 4 ft centre to centre (100X50x6 mm.) channel 97 Labour for D.C. Cross arms 4 ft centre to centre (100X50x6 mm.) channel 98 D.C. Cross-arms 8 ft centre to center (100x50x6mm)Channel 99 Labour for D.C. Cross-arms 8 ft centre to center (100x50x6mm)Channel 100 Transformer mounting DC cross-arm 100 X 50 x 6 mm, channel 101 Labour for Transformer mounting DC cross-arm 100 X 50 x 6 mm, channel 102 D.O.Mounting Channel75x40x6mm 103 Labour for D.O.Mounting Channel75x40x6mm 104 Horizontal & Cross Bracing set of MS angle of 50X50X6 mm for 8 ft (2.4 mtr ) centre DP 105 Labour for Horizontal & Cross Bracing set of MS angle of 50X50X6 mm for 8 ft (2.4 mtr ) centre DP 106 Trans.Belting with 50 X 50 X 6 mm.angle with two cross fixing channels 107 Labour for Trans.Belting with 50 X 50 X 6 mm.angle with two cross fixing channels 108 Clamp suitablefor 280 Kg. 9.1 mtr. long PCC Pole (3.04 kg each) 109 Back Clamp suitable for 280 Kg PCC Pole (MS Flat 65x8 mm) - each wt 1.92 Kg 110 Clampfor 8 Mtr PCC Pole Size-610 mm ,Wt- 1.46 Kg using 50X6 mmMs Flat 111 Back Clampfor 8 Mtr PCC Pole Size- 448 mm ,Wt- 1.075Kg using 50X6 mmMs Flat

INR 236 /-

INR 3629.0 /-

INR 1.81 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB