Implementation Of National E-Vidhan Application (Neva) End-To-End Digital Transformation Of Legislative Assembly. (Sh I- Providing Digital Transformation Facilities At Legislative Assembly) (Sh- Ii Provision Of High Speed Data Networking Poe / Network, Switches Ic Necessary Cabling And Accessories At Legislative Assembly).- 1 (SH:- I Audio Visual System ) 2 SITC of Digital combi Conference Control unit / Server units. Units must be Dante enable (must have minimum 2 Dante/ Network Ports) inbuilt from factorywith Integrated dynamics processor with programmable threshold, ratio, attack, and release of noise gate, AGC and limiter functions/ DSP with adaptive acoustic feedback, echo cancellation, parametric equalizer ( Dante, dynamic processor can be built to the controller/ server or integrated power supply unit) Unit Should have minimum 1 x Power Connectors, minimum 3 x Conference Network Ports or more than 1 x LAN Port, 1 x Balanced XLR audio input or more , 1 x Balanced XLR audio output or more, must be a capable of automatic or manual take-over of the Controller/Server by a spare controller units in case one would become inactive ,in built or external Recording capabilities, Audio Routing, Network Monitoring, Built-in diagnostics application and camera control capability., The Controller should be work on shielded network(non-proprietary) the above ports features can be complied through controller or integrated power supply. Controller Unit should support Voting & Interpretation. 19 Rack Mountable. Controller and server units should be from same OEM. Certification: CE. The OEM, product and bidder shall not share the common borders with India and adhere to GFR 144 (xi) guidelines of purchase manual and complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 3 SITC of integrated Power supply cum controller for conference unit with On/Off rocker/ switch with built-in indicator. It should have 48 V, LED indicator or better, Power good TTL output/ LED indicator provided on a sub D9 connector or better RJ 45 ports or Six 3-pin detachable Phoenix connectors are provided at the rear of the Power supply 1U or more to branch off the 48 V. 1U, 19 rack module, Mains power input: 100-240 VAC 60/50 Hz Output voltage: 48 VDC, Protection Short circuit: Overload, Temperature, Over voltage, Technology: Switched Mode Power Supply Certification: CE. The OEM, product and bidder shall not share the common borders with India and adhere to GFR144(xi) guidelines of purchase manual and complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 4 SITC of one/two or more upstream ports towards the Central Unit. 2 or more powered downstream ports towards the network/ conference field devices. Network Extender cum change over unit extended powering unit supports redundant loop cabling. It shall be possible to daisy chain and loop several network extenders on the conference controller network. It shall be possible to loop Chairman/Delegate units between several network extenders to create redundancy on a network extender level, The Network Extender cum change over unit is powered via the external power unit. Conference OS software application detects possible failure and starts the switch over process accordingly by the operator commands. Certification: CE. The OEM, product and bidder shall not share the common borders with India and adhere to GFR144(xi) guidelines of purchase manual and complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 5 SITC of Integrated Flush mount Delegate conference unit with Speaker Built-In and with removable microphone capability, supported for Voting and simultaneous Interpretation, microphone push button with integrated LED, Physical / Capacitive 5 clear voting buttons with LED indicators. Should have in build with RFID/ NFC card reader for identification and authentication, Channels selector button with a OLED/ LCD display and headphone volume control, Built-in high- quality loudspeaker, minimum 1W or as per OEM, built in speaker frequency response: 200-15,000 Hz or better, Speaker shall automatically muted/ active when the microphone is active, to prevent acoustic feedback available in custom colours dimension, finishes, construction: steel / metal or as pr OEM, only 3.5 mm stereo jack sockets for headphone connectivity. “Connectivity: › 2 x RJ 45 port (IN/OUT). Loop through, daisy-chain cabling (non-proprietary).USB-C or mini-USB or mini din, Push & Lock/ screw socket to connect the detachable microphone. Microphone Input: › Dynamic range: > 90 dB or better › THD: 0.1% or better.Certification: CE. The OEM, product and bidder shall not share the common borders with India and adhere to GFR144 (xi) guidelines of purchase manual and complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 6 SITC of Integrated Flush mount Chairman conference unit with Speaker Built-In and with removable microphone capability, supported for Voting and simultaneous Interpretation, microphone push button with integrated LED , Physical / Capacitive 5 clear voting buttons with LED indicators. Should have in build RFID/NFC card reader for identification and authentication, Channels selector button with a OLED/LCD display and headphone volume control, Built-in high-quality loudspeaker, minimum 1W or as per OEM, built in speaker frequency response: 200-15,000 Hz or better, Speaker shall automatically muted/ Active when the microphone is active, to prevent acoustic feedback available in custom colours dimension, finishes, construction: streel / metal or as pr OEM,only 3.5 mm stereo jack sockets for headphone connectivity. “Connectivity: 2 x RJ 45 port (IN/OUT ). › Loop through, daisy-chain cabling (non-proprietary).USB-C Push/ mincon/ mini din& Lock/ screw socket to connect the detachable microphone. Microphone Input: › Dynamic range : > 90 dB or better › THD: 0.1% or better. Certification: CE. The OEM, product and bidder shall not share the common borders with India and adhere to GFR144 (xi) guidelines of purchase manual and complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 7 SITC of Gooseneck Microphone 360 MM or above or as per site requirement must have a single/ dual flex gooseneck microphone (flexible top and lower sections) is equipped with USB C-based / mini-USB/ mini din push and lock/screw connector Polar Pattern: Cardioid/ Uni directional or better Shielded microphone, immune to mobile phone interference. Transducer principle: Back electret (condenser). Frequency response: 125 to 15000 Hz or better. Sensitivity @ 1 kHz/ Nominal input level : -43 dBV/Pa/ 85 dB SPL or better. Maximum SPL @ 1 kHz : 110 dB SPL or better. Signal-to-noise ratio/ Equivalent noise : 15 dB or better. Dynamic range : 90 dB or better. Microphone LED ring configurable with selection of RED and Green colour USB-C/ minicon/ mini din -based microphone connector. Connection: Push & screw /Lock. Certification: CE. The OEM, product and bidder shall not share the common borders with India and adhere to GFR144(xi) guidelines of purchase manual complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 8 SITC of conference software should offer all-in-one software package that simplifies room setup and meeting control. Easy step by step configuration wizard and Room layout configuration for the technician Roles for meeting control: › Operator › Chairperson › Signage Specify available controls for each role and Capability to protect roles with password Create a single meeting template including:› Title › Delegates and seating › Optional badge configuration › Optional external recording of the meeting audio Start a meeting from the template or a new meeting It should Manage speakers from room layout, Manage the speaker list, Manage request list with drag and drop re-ordering capability. It should Start a voting session, Voting question, 2 or 3 options for voting and Public or secret voting It should have Signage for Meeting view with Room layout, speaker list and request list, Voting view with results screen, Dynamically switch between meeting and voting view when voting starts / stops. Consult or save up to 20 meeting reports, The reports contain meeting participants, the recording (if available) and timestamped voting items with overall and individual vote resultsVoting results are visualized in the operator, and chairperson screen, but also the signage screen will toggle to visualize the voting results Whenever a need arises a voting can be started on the fly. The voting gets a description, and it can be defined if it is a public or secret vote. In a meeting template participants can be added by simply typing their name and adding them to their assigned seat. Additionally, an RF-ID card can be assigned, allowing participants to identify themselves by logging into any conference device in the room. 9 SITC of Light weight headphone unit Transducer principle: Dynamic as per OEM Load rating: 20 mW or better Impedance: 32 Ω or more, Sensitivity: 94 dB/mW(+ 3 dB at 1 kHz) or better, as per OEM Frequency range 35/50-15,000 Hz or better, Connector: 3.5 mm stereo jack. complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 10 Supply & Laying of Conference Cable 2 Mtr or as per OEM recommended Cat6 shielded cable with high quality STP end connectors complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 11 Supply & Laying of Conference Cable 20 Mtr or as per OEM recommended Cat6 shielded cable with high quality STP end connectors complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 12 SITC of 6 two-way ceiling/ Surface mount speaker with at-least 0.5 HF driver. The speaker must have frequency range (-10 dB) of 70 Hz – 20 kHz; Sensitivity > 88 dB (1W/1m), delivering Max. Calculated SPL (peak) > 100 dB with continuous power handling 30W @ 100V or less. The speaker should have transformer tapping up to 30W .The speaker cabinet should have at-least 170°conical dispersion pattern complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 13 SITC of 240w mixer amplifier with Inbuilt Bluetooth for audio streaming and supports audio playback from USB pen drive with4 microphone/line inputs, plus music source input and insert feature to use as a pre/power amplifier. It also has optional 2 tone chime generation for input 1 complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 14 Supply, Installation, Testing & Commissioning of open architecture DSP having 12 mic/line level inputs with AEC and phantom power, 8 line level outputs, 4x4 USB audio channel, 8 Digital I/O ports, Dante, minimum 4 x RJ-45 Dante ports, minimum 8 audio files can be stored in in-built storage for playback including pink noise, white noise etc, minimum 16 channel bi-directional digital audio expansion bus, zoom & Microsoft teams certified, sampling rate: 48KHz or better, Ethernet monitoring and control, Front panel main input and output signal presence and clipping LEDs; THD + Noise <0.02% or better; Crosstalk <- 90 dB or better; processor: 64-bit. Certified for Microsoft Teams and Zoom for Audio and Video collaboration complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 15 Supplying and laying of 16 AWG 2-core speaker Cable with 19-strand annealed bare copper conductors; Semi- rigid PVC insulation; Twisted, unshielded; Riser rated PVC jacket; NEC CL3R, CEC CMG, RoHS compliant complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge. 16 Supply, Installation, Testing & Commissioning of AV Quad Core control processor with minimum 1x RS232/RS422/RS485, 1x bidirectional RS232 or more, 2 or more IR/Serial, 4 or more Relay, 4 or more Digital I/O. control AV devices over Ethernet port supporting 10/100/1000Base-T and should support IEEE 802.1X, IPv4, TCP, UDP, DHCP, DNS, HTTPS, NTP, SFTP, SMTP, SNMP, SSH protocols. Should have SDRAM: Min 2GB or more and Flash Memory: Min 8 GB or more. Should have Built-in IR receiver for recording IR commands. Should be Operational in up to 45°C temperature. Should have Regulatory compliance: CE/UL or any equivalent complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 17 Supply, Installation, Testing and Commissioning of 10 Tabletop capacitive touchscreen with 1280x800 resolution and 24-bit color depth, Pixel density 149 PPI; Aspect ratio - 16:10; Brightness- 420 nits; Contrast - 800:1; Viewing angle ±85° horizontal, ±85° vertical; SDRAM- 2GB, Flash- 8 GB; Motion & Lighting sensor- On/off OR Auto/manual; Connectors — 1 x female RJ-45; Data rate: 10/100/1000Base-T, half/full duplex with autodetect; Protocol DHCP, DNS, HTTP, HTTPS, ICMP, IEEE 802.1x, SFTP, SSH, TCP/IP, UDP/IP; Touch panel and control processor should be from same OEM complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 18 Supply, Installation, Testing and Commissioning of 98 4K UHD(3840 X 2160) Slim DLED display, Aspect Ratio 16:9, Brightness 600 Cd/m2 or better, Pixel Pitch 0.5622mm(H) × 0.5622mm(V) or better, Haze 30% or better, Viewing Angle 178°or better, HDMI IN X 3, HDMI Output X 1 ,Audio Output 1 x 3.5mm, USB 2.0 X 1 ,USB 3.0 X 1 ,RS232 X 1, LAN X 2(IN/OUT), USB Type-C X 1, 4GB DDR4 memory, 32GB storage, 24 W in built speaker, 24/7 operation, Operation Temperature:0℃ - 45℃, Operation Humidity: 10% - 90%. complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 19 Supply, installation, testing and commissioning of iPad Pro 13″ (M4): Ultra Retina XDR Display, 1TB, Landscape 12MP Front Camera / 12MP Back Camera, LiDAR Scanner, Wi-Fi 6E, Face ID, All-Day Battery Life, Nano-Texture with app from conference OEM if control of IPAD and running of NIC application is required from the conference server complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site including adaptor for USB C to RJ 45. 20 Supply, Installation, Testing and Commissioning of 4K @ 60 fps PTZ Camera with minimum 30X Optical Zoom, min 100 Presets, simultaneous output through Ethernet, HDMI, 12G-SDI and USB 3.0, Audio In and can be controlled via RS232 & 422 In & Out & IP, -170° ~ +170° Panning angle, -30° ~ +90° Tilting angle. The camera tilting and panning speed should be minimum 300° per second. Should support, SRT, FreeD Protocol, PoE and Virtual USB Driver. OEM should be CE, FCC, RoHS & BIS Certified complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 21 Supply, Installation, Testing and Commissioning of Multi-Functional Multi-Camera Controller Joystick should have all required Control Ports complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 22 Supply, Installation, Testing and Commissioning of 4K Video mixer / Speaker Auto Tracking switcher which canseamlessly integrates with above PTZ cameras and conference microphone systems to automatically capture and switch to close-up views of the person speaking, Supports up to 9 Cameras with Automatic Layout Switching, speaker auto-control setting, including override and FIFO modes, customized conference visuals by adding the logo, background images and text overlay for individual speakers, supports 4CH 4K UHD or up to 9CH Full HD video sources,compatible with network-based H.264 RTMP/RTP/RTSP/SRT, and NDI|HX video sources, Video Outputs : 2 x HDMI, 1 x RJ45, Audio I/O : 2 x 3.5 mm stereo Mic in / out complete as per specifications complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 23 Supply, Installation, Testing and Commissioning of 4K Video Recorder, Up to 2ch 4K UHD or 4ch FHD Video Sources Capturing,Switching, Recording and Live Streaming, Support Dante Audio, NDI|HX and SRT Streaming Protocols, PGM Recording up to 4K UHD 30fps with 2TB Internal Storage, Easily Add Background Images, Overlays and Change Video Layouts in Video Making, Supports Overlay PNG Images with Transparent, Opaque, and in Between, Video Input Interface: HDMI x 2, RJ-45 x 2 (supports IP streaming: up to 4 channels, USB x 3 (UVC), Audio Input Interface : 3.5mm Stereo Mic in, Video Output : HDMI x 1 for loop out, HDMI x 1 for preview, Audio out : 1 x 3.5 mm stereo, Recording Mode : 1 mixed + 4 individual original, Control : RS-232 / LAN complete as per specificationcomplete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 24 Supply and Laying of SDI cable complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 25 Supply, Installation Testing & Commissioning of AV over IP 4K Encoder 4K 60 4:4:4with2 x HDMI and 1 x USB-C input and 1 x HDMI output, Auto Video 4K scaler, Switching between the three inputs can beperformedautomaticallyusing auto-switching (input detect) mode, programmatically via a control system, or through a web browser, HDMI loop- through: display any of the three locally connected sources, standard PoE power (15w or lower), HDMI 2.0 & HDCP 2.2, AES-128/256 Encryption, Audio : Analog Stereo 2- channel, HTTPS Secure API, 802.1x Authentication for Network access control, SSH Network Protocol, , Auto Discover all endpoints on the network, VLAN tagging,LLDP Support, QoS Support, USB 2.0 over IP (KVM), RS- 232 over IP, IR over IP, A single Gigabit LAN Port for PoE Power, 4K UHD Video, Latency not more than 10 ms,High Dynamic range(HDR),futureupgradableto Dante / AES 67 complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 26 Supply , Installation, Testing & Commissioning of Decoder supports 4K UHD over Gigabit Ethernet, Bit Rates 50 to 800 Mbps, Video Codec: JPEG2000 based visually lossless video compression algorithm, supports: 4K60 4:4:4, AES-128 Encryption, 1x HDMI with HDCP 2.2 & Sacling Supports a wide range of resolutions and rates, up to 4K, Streaming protocols include IP, UDP, TCP, IGMP, and IGMP, Built-in videowall function, Auto Video Scaler, Vlan Tagging , Analog to digital Conversion: 24 bit, 48 kHz; Control: USB 2.0 over IP (KVM), RS-232 over IP, and CEC over IP, Compliance: CE, FCC, RoHS, WEEE complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 27 SITC of core network switch 24 port 10 G. Efficient use with, 8 SFP+ ports with 10 Gbit,640 Gbps switching capacity, Web interface, Slim 1/ 2 RU housing, Connections – 8 x SFP+ 10 Gbit, 8 x 10G copper. RJ45, RS232, RJ45 Ethernet, 100-240 VAC, approx. 70W, Redundant power supply complete with all required accessories needed for successful installation and as per direction of Engineer-in-Charge as per requirement of site. 28 Supply, Installation, Testing and Commissioning of network switch — 24x1G PoE+ Stackable Managed Switch with 2x10GBASE-T and 2xSFP+ (550W PSU) 24-port 1000BASE-T (RJ45) PoE+, 2-port 10GBASE-T (RJ45) all independent, 2-port 10GBASE-X (SFP+) all independent, 128Gbps non-blocking fabric across 28 ports • Out-of-band 1G Ethernet Management port • Mini-USB and RJ45 RS232 console ports and USB storage port, Full L3 feature set and non-stop forwarding (NSF) stacking, Full width form factor with one-unit rack mount kit, one modular 550W PSU in first power supply slot,second slot with a blank cover for future PSU expansion complete with all required accessories needed for sucessful installation and as per direction of Engineer-in-Charge as per requirement of site. 29 Supply, Installation, Testing, and Commissioning of 10G SFP+ modules etc as required. 30 Supply and Laying of 6 core single-mode optic fibre cable in existing casing/ conduit / wall etc complete as required. 31 Supply, Installation, Testing, and Commissioning of 6U AV Rack etc as required. 32 Supply, Installation, Testing, and Commissioning of 42U AV Rack etc as required. 33 Supply and Laying 2m HDMI cable etc as required. 34 Supply, Installation, Testing, and Commissioning of fibre cable accessories etc as required. 35 Supply, Installation, Testing, and Commissioning of AV cable and connector etc as required. 36 Supply and Laying of Cat6 Cable in existing casing/ conduit / wall etc complete as required. 37 Supply and install raceway compartment 100/300 mm x 38 mm, 1.6 mm thick, under-floor metal trunking/raceway with all accessories made from hot-dip pre-galvanized metal-coated steel sheet. With other necessary accessories etc as required. 38 Design, Supply, testing & commissioning of telescopic type MS mounting frame, duly powder coated in custom colour, conference table mounting arrangement for holding iPads for Members, including locking arrangement etc. The mount should have Horizontal/vertical suitable for viewing by the members in the house or as per direction of Engineer in Charge. 39 SITC of Redundancy setup This module allows automatic take-over of the Controller/Server by a spare engine in case one would become inactive. Includes an power switch to facilitate automatic startup of spare engine etc as required. 40 SITC of 20W 2 way column speaker, 3mm aluminum extruded enclosure, sturdy swivel bracket, both direct and LMT connectivity, perforated metal, transducers: 4x2 woofer, 1x1 dome tweeter, input: euro block, sensitivity: 98dB, Nominal impedance: 8 ohm, crossover freq. 6kHz, freq. range: 160Hz~20kHz, Power Taps 100V: 5, 10, 20W, weight: 2.5kg etc as required. 41 (SH:-II Networking system) 42 Supplying, installation, testing and commissioning of Enterprise Grade Core Switch have 24 x 1G/10G/25G Fiber based ports and 4 x 40/100G QSFP+ ports, minimum 1.8 Tbps of switching fabric and minimum 900 Mpps of forwarding rate. minimum 8 GB RAM and minimum 8 GB Flash , Shall have minimum 50K MAC Addresses and 1K VLANs.must have hot swappable 1:1 redundant internal power supply and redundant fan. Must support BGP, VRF, VXLAN, OSPF Routed Access, Policy-Based Routing (PBR), PIM SM, and Virtual Router Redundancy Protocol (VRRP) from Day 1 with 5 Year Warranty 43 Supply, Installation, Testing & Commissioning of SFP+ 100G optical modules for fibre uplinks. Compatible for stacking of Core switches, includes 5 years warranty etc. complete asper attached specifications and as per direction of Engineer in Charge as per site requirement. 44 Supplying, installation, testing and commissioning of 24 Port PoE+ Access Switch: 16 x 10/100/1000 Base-T POE+ ports, 8 x multigig copper ports (2.5G/5G/10G) for Wi-Fi-6 APs and 4 x SFP+ uplinks ports and Dedicated/virtual Stacking Port and required cable for Stacking should be considered from Day1, 24 ports should support PoE (802.3af) and PoE+ (802.3at) with a PoE power budget of 370 Watts ,shall have minimum 270 Gbps or more of switching fabric and 210 Mpps (64 byte packet) of forwarding rate ,minimum 2 GB RAM and 4 GB Flash, minimum 16K MAC Addresses and 500 VLANs, should support internal hot-swappable Redundant Power supplies with 5 Year Warranty. 45 Supplying, installation, testing and commissioning of Access Switch NON POE 24 nos. 10/100/1000 Base-T ports. and 4 nos. SFP+ uplinks portsand Dedicated/virtual Stacking Port and required cable for Stacking should be considered from Day1,shall have minimum 128 Gbps or more of switching fabric and 95 Mpps (64 byte packet) of forwarding rate ,minimum 2 GB RAM and 2 GB Flash, minimum 16K MAC Addresses and 500 VLANs, should support internal hot-swappable Redundant Power supplies with 5 Year Warranty. 46 Supplying, installation, testing and commissioning ofWi-Fi 6 Indoor Access Point, MIMO - 4x4:4SS, Min. 2.50 Gbps Aggregate throughput, should support WIDS/WIPS inbuilt, should support BLE/IoT Radio. Interfaces - 1 x 100/1000/2500 Mbps with 05 Yrs of required Licenses and support. 47 Supply, Installation, Testing & Commissioning of SFP+ 10G optical modules for fibre uplinks. Compatible with access/core switches, includes 05 years warranty etc. complete asper attached specifications and as per direction of Engineer in Charge as per site requirement. 48 SITC of SDWAN Router supporting minimum 5 Gbps of IPv4 Forwarding throughput and minimum 2Gbps of IPSec throughput, minimum of 8 GB or more Memory and 16 GB or more flash storage, Multi-core x86 processor or better processor and minimum – 2 x 1G/10G SFP+ Wan Ports, 04 x 1G copper ports & should be updgradable if required, USB and RJ45 console Portsincludes 05 years warranty & Licenses etc as per site requirement. 49 Supply, Installation, Testing & Commissioning of UTP Cat 6a S/FTP Cable LSZH etc. in existing casing/ conduit/ wall/ trench etc complete asper attached specifications and as per direction of Engineer in Charge as per site requirement. 50 Supply, Installation, Testing & Commissioning of of19 1U straight Un-loaded Patch Panel, 24-portetc. complete as reqd. 51 Supply, Installation, Testing & Commissioning of Shielded Information outletsCategory 6a, EIA/TIA 568-C.2 etc. complete as reqd. 52 Supply, Installation, Testing & CommissioningofSquare Dual Face plate, 86mmx86mm 3x3complete 3 etc. complete as reqd. 53 Supply, Installation, Testing & Commissioning ofmounting patch card Cat 6a S/FTP, 1 meter long, etc. complete as reqd. 54 Supply, Installation, Testing & Commissioning ofmounting patch card Cat 6a S/FTP, 2 meter long,etc. complete as reqd. 55 Supply, Installation, Testing & Commissioning of 6-Core armoured LSZH indoor Multi ModeFiber cable OM4 etc as required. 56 Supply, Installation, Testing & Commissioningof 12 portFibre MMF OM4 Panel RackMountable with Loaded LC adapter plate, pigtails complete etc. complete as reqd. 57 Supply, Installation, Testing & Commissioning of 24 portFibre MMF OM4 Panel RackMountable with Loaded LC adapter plate, pigtails etc. complete as reqd. 58 Supply, Installation, Testing & Commissioning of LC-LC Style MMF OM4Fiber Patch Cord 2 Mtr etc. complete as reqd. 59 Supply, Installation, Testing & Commissioning of 3x3 metalic surface box ISI etc. complete as reqd. 60 Supply, Installation, Testing & Commissioning of Network Rack 9 U wall mount : 600W*600H with Accessories etc. complete as reqd. 61 Supply, Installation, Testing & Commissioning of Network Rack 12 U wall mount : 600W*600H with Accessories etc. complete as reqd. 62 Supply, Installation, Testing & Commissioning of Network Rack 27 U with below included: Network Rack 800W x800D, Top cover with 4 x cutout, 2 x cutout for cable entry. Bottom cover with 4 x cutout for cable entry. All cutouts blanked with Plastic caps. 2 pairs etc. complete as reqd. 63 Supply, Installation, Testing & Commissioning of Network Rack 42 U with below included: Network Rack 800W x 2000H x 800D, Top cover with 4 x cutout, 2 x cutout for cable entry. Bottom cover with 4 x cutout for cable entry. All cutouts blanked with Plastic caps. 2 pairs, 42 U 19 Profile Typeangle, Front Rack Type 1-800W X 2000(42U)H X 1000Detc. complete as reqd. 64 Supply, Installation, Testing & Commissioningof1U Cable Manager Horizontal Single sided etc. complete as reqd. 65 Supply, Installation, Testing & Commissioning of 3 KVA UPS 0.90 input power factorfeatures. THD(i) shall be less than 3% in the entire loading range. Input power factor shall be more than 0.95. from 25% to 100% load. UPS shall carry design output at 40 deg. Shall have soft start and hold of for incoming supply. Invertor capability to supply 150% load for 5 sec. Single Phase Input and Single Phase Output. ( Input - 220V - 250V, Single Phase, 2 wire. / Output - 200Volt, Single Phase, 2 Wire.)Shall not allow deep discharge of the battery and shall not go to 10.5 volts in case of 12 volt cells. Battery shall be internal type and suitable for 30 minute backup on 100% load etc. complete as reqd. 66 SITC of 10 KVA UPS 0.90 input power factorfeatures. THD(i) shall be less than 3% in the entire loading range. Input power factor shall be more than 0.95. from 25% to 100% load. UPS shall carry design output at 40 deg. Shall have soft start and hold of for incoming supply. Invertor capability to supply 150% load for 5 sec. Single Phase Input and Single Phase Output. ( Input - 220V - 250V, Single Phase, 2 wire. / Output - 200Volt, Single Phase, 2 Wire.)Shall not allow deep discharge of the battery and shall not go to 10.5 volts in case of 12 volt cells. Battery shall be internal type and suitable for 30 minute backup on 100% load etc. complete as reqd. 67 Supply, Installation, Testing & Commissioning ofWater Leakage Detection System etc. complete as reqd. 68 Supply, Installation, Testing & Commissioning ofRodent control system etc. complete as reqd. 69 Supply, Installation, Testing & Commissioning ofSteel Cement Laminated Raised Floor, Size (mm): 600x600 35mm etc. complete as reqd. 70 Supply, Installation, Testing & Commissioning of Door access control system etc. complete as reqd. 71 Supplying and Fixing following sizes DLP PVC adaptable trunking system for laying of wires for various services complete with accessories such as angle and end cap, Junction, Jointetc. complete as required. 72 32 x 12.5 73 32 x 16 74 32 X 20 mm 75 80 X 50 mm 76 105 X 50 mm 77 150 X 50 mm 78 195 X 50 mm 79 Supplying & Laying of one number XLPE insulated stranded copper armoured power cable of 1.1 KV grade of following size in existing casing/ conduit/ tray/ wall/ Race ways / ductetc as complete asper attached specifications and as per direction of Engineer in Charge as per site requirement.a) 3 core 4 sq.mm
