Supply And Installation Of Office Furniture For Different Locations Of Ihb Up State , Executive Table With Pedestal Overall Size Executive Table Top 25 Mm Ppb , 0.6 Mm Thick Post Formed Laminate , 1 Mm Thick Bdl , 2 Mm Pvc , Modesty 18 Mm Thick Ppb , Clad 1.0 Mm Dl Size : 1800 W X 900 D X 740 H Size Shall Be 1800 Width Mm X 900 Depth Mm X 740 Height Mm .Table Top Shall Be 25 Mm Thick Plain Particle Board (Ppb) Clad With 0.6 Mm Thick Post Formed Laminate And 1 Mm Thick Backing Laminate (Bdl) .Flat Edge Duly Sealed With 2 Mm Thick Pvc Beading. The Modesty Shall Be 18 Mm Thick Plain Particle Board ( ) Ppb Clad With 1.0 Mm Thick Decorative Laminate (Dl) On Both Sides. Edge Sealed With 2 Mm Thick Pvc Beading. With Standard Size Pedestal , Executive Chair Overall Size Mid Back Back: 47.7 Cm. (W) X 60.1 Cm. (D), Seat:47.0 Cm. (W) X 48.0 Cm. (D)Overall Dimensions Of Chair Seat Height -43.1-53.1Cm Height -96.5-114.0.Cm. Width & Depth Of Chair As Measured From Base - Width-76.1 Cm And Depth-76.1 Cm 1) Seat Assembly : The Cushioned Seat Should Be Made Of Injection Molded Plastic Outer & Inner. Plastic Inner Should Be Upholstered With Leatherette And Moulded High Resilience (Hr) Polyurethane Foam Of Density 45±2 Kg/M3,And Hardness Load 16 ± 2 Kgf As Per Is:7888 For 25% Compression. Seat Size : 47.0 Cm. (W) X 48.0 Cm. (D) 2) Back Assembly: The Cushioned Back Should Be Made Of Pu Foam With Insitu Molded Ms E.R.W Round Tube Of Size 1.9±0.03Cm X 0.16 ±0.0128Cm. It Upholstered With Leatherette.(D) *Mid Back Size: 47.7 Cm. (W) X 60.1 Cm. (D) 3) Armrests (Fu3301/Fu3302) : The Armrest Top Should Be Moulded From Polyurethane(Pu) And Mounted On To A Drop Lift Adjustable Type Tubular Armrest Support Made Of 03.81±0.03 Cm X 0.2±0.01 Cm Thk M.S. E.R.W Tube Having Chrome Plated Finish. The Armrest Height Adjustable Up To 6.5±0.5Cm In 5 Steps. 4) Active Bio-Synchro Mechanism (Fu3301/Fu3302): The Adjustable Tilting Mechanism Should Be Designed With The Following Features:360 Revolving Type. • Front-Pivot For Tilt With Feet Resting On Ground And Continuous Lumbar Support Ensuring More Comfort. • Tilt Tension Adjustment Can Be Operated In Seating Position. • 5-Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair. • Seat/Back Tilting Ratio Of 1: 2 • The Mechanism Housing Should Be Made Up Of Hpdc Aluminium Black Powder Coated. 5) Seat Depth Adjustment (Fu3301/Fu3302): Seat Depth Adjustment Should Be Integrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Should Be Of 6.0±0.5 Cm. 6) Adjustable Back Support (Fu3301/Fu3302): Back Frame Should Be Connected To The Up/Dn Mechanism Housed In Plastic T Spine. It Can Be Adjusted In The Range Of 7.42±0.5 Cm For The Comfortable Back Support To Suit Individual Need. 7) Pneumatic Ht. Adjustment (Fu3301/Fu3302): The Pneumatic Ht Adjustment Has An Adjustment Stroke Of 10.0±0.3 Cm. 8) Pedestal Assembly (Fu3301/Fu3302): The Pedestal Should Be High Pressure Die Cast Polished Aluminium And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be 65.0 ± 0.5Cm. Pitch-Centre Dia.(75.0 ± 1.0Cm. With Castors.) 9) Twin Wheel Castors:The Twin Wheel Castors Should Be Injection Moulded In Black Pp Having 6.0± 0.1Cm Wheel Diameter. , Visitor Chair With Arms Overall Size Visitor:Back: (W)47.5Cm X (H)58.0Cm, Seat :(W)47.0Cm X (D) 48.0Cmoverall Dimensions Of Chair Seat Height - 46.5Cm.Height - 89.5Cm. Width & Depth Of Chair As Measured From Pedestal - Width-61.4 Cm And Depth-64.5 Cm. 1.Seat/Back Assembly: The Seat And Back Should Bemade Up Of 1.2 ±0.1Cm. Thick Hot-Pressed Plywoodand Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam. The Back Foam Should Be Designed With Contoured Lumbar Support For Extra Comfort. The Seat Has Extra Thick Foam On Front Edge To Give Comfort To Popliteal Should Be A.Back Size 47.5 Cm. (W) X58.0 Cm (H) Seat Size 47.0 Cm. (W) X 48.0 Cm. (D) High Resilience (Hr) Polyurethane Foam: The Hr Polyurethane Foam Should Bemoulded With Density = 45±2 Kg/M3 And Hardness Load 16 ± 2 Kgffor 25% Compression. 3.Armrests: The One-Piece Armrests Should Be Injection Moulded From Black Co-Polymer Polypropylene.4. Tubular Frame: The Powder Coated (Dft 40-60 Microns) Tubular Frame Should Be Cantilever Type & Made Of 0 2.54 ±0.03Cm. X 0.2 ±0.016Cm.Thk. M.S. Er.W.Tube. , Three-Seater Sofa Overall Size Sofa 3 Str Width (W): 206.0 Cm. Depth (D): 90.5 Cm. Height (H): 85.5 Cm. Seat Height (Sh): 45.0 Cm.1) Seat Foam: The Seat Is Made Up Of Pu Foam In Density 28 ±2 Kg/Cu.Mtr With An Additional Top Layer Of Super Soft Pu Foam In Density 32 ± 2 Kg/Cu, Upholstered With Fabric Or Leatherette. Back Foam: The Back Is Made Up Of Pu Foam In Density 28 ± 2 Kg/Cu. Mtr With Two Additional Top Layers Of Super Soft Foam Of Density 32±2 Kg/Cu. Mtr, Upholstered With Fabric Or Leatherette. Understructre: Under Structure Is Made Up Of 1.2±0.1 Cm. Thick Hot Pressed Plywood [Moisture Resistance & Termite Proof As Per Is:303] & Pinewood Of Cross Sections Devoid Of Major Knots & Surface Defects. 6 Nos. Per Seat & 3.8Mm Dia Zigzag Spring Assembly Is Mounted Over Understructure For Cushioning Purpose. Leg Assembly : It Is A Welded Assembly Made In Stainless Steel (Grade Ss 202) Tube & Plate With Plastic Endcap. , Centre Table With Arms Overall Size Coffee Table Walnut Overall Size :Width : 120Cm Depth : 60Cheight : 37.8Cm Dimensions W X H X D (Cm) Overall Size : Width : 119.9Cmdepth : 59.9Cmheight : 45Cm Primary Material - Plywood Finish Color - Walnut Maximum Load Capacity (Kg) - 50 Wheels Included - No Vintage Era Inspired Colour And Design, With Curved Legs And A Walnut Finish, That Adds A Classic Charm To The Space. • Made Of High-Density Plywood And A Rubber Wood Underframe, This Clean Design Free Of Unnecessary Details Makes It Easy To Maintain. • 24Mm Thick Surface That Can Support Up To 50 Kgs , 4 Dr Filling Cabinet Over All Sized 4 Drawer Vertical Filing Cabinets (New) 1 Point Locking Mechanism, Easy To Grip Full Length Recess Handle For Easy Pull Out Convenience.Snap On Type Plastic Label Holder. Centralised Locking With Shooting Bolts Mechanish And 10 Lever Cam Lock. Anti-Tipping And Anti-Rebound Mechanish.Max Load Capacity Of 40 Kg. Epoxy Powder Coating With Thickness Of 50 Microns.Overall Dimensions Of Vfc=1320Mm(H)X470mm(W)X620mm(D) Top, Side & Drawer Front Thickness=0.7Mm Frames, Drawer-Inside Cover And Side Back Side Thickness=0.6Mm Back, Bottom And Drawer Thickness=0.5Mm Vertical Filing Cabinets Whcih Use Less Floor Space. Size Of 4 Drawer Vfc Shall Be 1320Mm(H) X 470Mm(W) X 620Mm(D). All The Components Shall Be Made Of Crca . It Should Have 1 Point Locking Mechanism And A Rigid Knock Down Construction. The Top, Side & Drawer Front Thickness Should Be 0.7Mm. The Frames, Drawer-Inside Cover And Side Back Side Thickness Should Be 0.6Mm. The Back, Bottom And Drawer Thickness Should Be 0.5Mm. Easy To Grip Full Length Recess Handle Shall Be Integrated Into Metal Drawer For Easy Pull Out Convenience. There Shall Be A Snap On Type Plastic Label Holder On Drawer Fronts. In Addition, 28 ‘Ezee’ / ‘Visa’ Files (Foolscap) From Front To Back Of Thickness 20Mm Per Drawer Can Be Hanged In Vfc. The Centralized Locking System Shall Be Provided Alongwith Shooting Bolt Mechanism And 10 Lever Cam Lock. The Vfc Should Have Anti-Tipping Arrangement Which Ensures That When One Drawer Is Opened For Use, It Does Not Allow Other Drawers To Be Opened. The High Quality Precision Ball Slide Shall Be Provided With Drawer Load Capacity Of Max 40 Kg And Udl For 75,000 Cycles (Bs). Plain Triangular Plate Pop Should Be Riveted At The Bottom Corners For Rigidity. Optional Accessories Like Drawer Partition And Cradle For Hanging A4 File Folders Front To Back Should Also Be Available. The Finishing Shall Include Epoxy Powder Coated To The Thickness Of 50 Microns (+/- 10). , Office Table Overall Size Officer Table Top Ppb 18 Mm Thick , 15 Mm Thick Under Structure , Pvc Lipping , Locking ,Beech Colour , 1 Drawer (Rhs) , Hdu , 3 Drawer Unit (Rhs ) Size : 1500 W X 750 D X 750 H Size Shall Be1500 Width Mmx 750 Depth Mmx 750 Height Mm . The Table Top Shall Be Made Of Pre- Laminated Particle Board With 18 Mm Thick And 15 Mm Thick Understructure Covered With Pvc Lipping .There Shall Be Locking Provided For Top Drawers Only , Attractive Black Colour Handles For All Drawers Plus Only One Colour Is Available Beech.It Shall Have One Drawer (Rhs ) & Hdu Attachment On One Side & 3 Drawer Unit On The Other Side ( Lhs Of User ) , High Back Chair Over All Sized High Back:- Back: (W)47.5Cm X (H)69.5Cm, Seat :(W)47.0Cm X (D) 48.0Cm Overall Dimensions Of Chair Seat Height - Min 42.5 To Max 54.5Cm. Height - Min97.0 To Max 109.0Cm. Width & Depth Of Chair As Measured From Pedestal - Width-76.3 Cm And Depth-76.3 Cm. 1.Seat/Back Assembly: The Seat And Back Should Bemade Up Of 1.2 ±0.1Cm. Thick Hot-Pressed Plywood And Upholstered With .Fabric Upholstery Covers And Moulded Polyurethane Foam. The Back Foam Should Be Designed With Contoured Lumbar Support For Extra Comfort. The Seat Has Extra Thick Foam On Front Edge To Give Comfort To Popliteal Area. Back Size 47.5 Cm. (W) X 69.5 Cm (H) Seat Size 47.0 Cm. (W) X 48.0 Cm. (D) 2.. High Resilience (Hr) Polyurethane Foam: The Hr Polyurethane Foam Should Be Moulded With Density = 45±2 Kg/M3 And Hardness Load 16 ± 2 Kgffor 25 Compression.3. Armrests: The One-Piece Armrests Should Be Injection Moulded From Black Co-Polymer Polypropylene.4. Center Tilt Synchro Mechanism: The Mechanism Should Be Designed With The Following Features: 360° Revolving Type. • Upright-Position Locking • Tilt Tension Adjustment • Seat/Back Tilting Ratio Of 1:3. 5. Pneumatic Height Adjustment: The Pneumatic Height Adjustment Has An Adjustment Stroke Of 12.0 0. 3Cm.6.Telescopic Bellow Assembly The Bellow Should Be3 Piece Telescopic Type And Injection Moulded In Black Polypropylene. 7.Pedestal Assembly: The Pedestal Should Be Injection Moulded In Black 33% Glass-Filled Nylon-66 And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be66.3 ±0.5Cm. Pitch-Center Dia. (76.3 ±1.0Cm With Castors). 8.Twin Wheel Castors: The Twin Wheel Castors Should Be Injection Moulded In Black Nylon. , Almirah Big Overall Size Almirah:- High Yield Strength Crca Steel. Mazak Handle & 3 Way Locking Mechanism With Shooting Bolts. Height Wise Adjustable Shelf Mounting With Udl Capacity Of Max 40 Kg. Epoxy Powder Coating With Thickness Of 50 Microns. Overall Dimensions Of Storwel= 916Mm(W)X486mm(D)X1981mm(H)Shelf Thickness- 0.7Mm Back Thickness - 0.8Mm Door Thickness- 0.8Mm Storwel Plain Shall Have An Overall Size Of916mm(W)X486mm(D)X1981mm(H) With Welded Construction. It Should Have The Shelf Thickness Of 0.7 Mm, Back Thickness Of 0.8Mm, Door Thickness Of 0.8Mm (High Yield Strength) And All Other Components Shall Have A Thickness Of 0.9Mm. These Components Shall Be Made Of Crca ‘D’ Grade High Yield Strength As Per Is:513. The Storwel Plain Should Have A Mazak Handle And Three Way Locking Mechanism With Shooting Bolts. It Should Have A Height Wise Adjustable Shelf Mounting Which Shall Have A Uniformly Distributed Load Capacity Of Max 40 Kg. It Should Also Have A M10 Screw Type Leveller With Hex Plastic Base. The Finishing Shall Include Epoxy Powder Coated To The Thickness Of 50 Microns (+/- 10). Plenty Of Colour Options And Shelving Options Shall Be Available. , Staff Chair Providing, Supplying And Placing Of Mid Back Chair. Seat Assembly: The Seat Is Made Up Of 1.5 ± 0.1 Cm Thick Hot - Pressed Plywood Upholstered With Fabric And Moulded Polyurethane Foam.Seat Assembly: 47.00Cm (W) X 45.70Cm(D)Back Assembly: The Back Is Injection Moulded In Glass Filled Polypropylene Which Is Upholstered With Mesh Fabric.The Back Consist Of Adjustable Lumbar Support Made Of Injection Moulded Polypropylene Having A Nominal Thickness Of 0.3 ±0.02 Cm.Back Size: 48.00 Cm(W) X 57.60 Cm(H).Polyurethane Foam: The Polyurethane Foam For Seat Is Of Density= 48 ± 3Kg/M. Armrests (Fixed): The Armrest Is Made Of Injection Moulded Polypropylene Which Is Connecting Seat And Back .Mechanism : The Mechanism Is Designed With The Following Features: *360° Revolving Type. *Centre - Tilt. *Tilt With Upright Lock. Pneumatic Height Adjustment: The Pneumatic Height Adjustment Has A Stroke Of 10 ± 0.5Cm. Pedestal Assembly: The Pedestal Is Injection Moulded Polyamide And Fitted With 5 Nos.Twin Wheel Castors. The Pedestal Is 66.1 ±0.5 Cm P.C.D. Twin Wheel Castors: The Twin Wheel Castors Are Injection Moulded In Black Polyamide Having 6.0± 0.1 Cm Wheel Diameter. Width (W) - 75.6 Cm Depth (O) - 75.6 Cm Height (H) - 88.5-98.5 Cm Seat Height (Sh) - 41.0-51.0 Cm. , Office Table Over All Size Table Top Ppb 18 Mm Thick , 15 Mm Thick Understructure , Pvc Lipping , Locking ,Beech Colour , 1 Drawer Attachmenttable -Size : 1200 W X 600 D X 750 H Size Shall Be1200 Width Mmx 600 Depth Mmx 750 Height Mm .The Table Top Shall Be Made Of Pre- Laminated Particle Board With 18 Mm Thick And 15 Mm Thick Understructure Covered With Pvc Lipping .There Shall Be Locking Provided For Top Drawers Only , Attractive Black Colour Handles For All Drawers Plus Only One Colour Is Available Beech. It Shall Have Only 1 Drawer Attachment . , Revolving Mid Back Chair The Seat And Back Shall Be Made Up Of 1.2 ±0.1Cm. Thick Hot-Pressed Plywood Measured As Per Qa Method Described In Ocp-Qlta-P14-18 And Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam. The Back Foam Shall Be Designed With Contoured Lumbar Support For Extra Comfort. The Seat Shall Be Extra Thick Foam On Front Edge To Give Comfort To Popliteal Area. The Dimensions Of Back Shall Be 47.5 Cm(W) X 58.0 Cm(H) And Of Seat Shall Be47.0 Cm (W) X 48.0 Cm (D). The Hr Polyurethane Foam Shall Be Moulded With Density= 45±2 Kg/M3 And Hardness Load 16 ± 2 Kgf As. Per Is:7888 For 25% Compression. The One-Piece Armrests Shall Be Injection Moulded From Black Co.Polymer Polypropylene. The Mechanism Shall Be Designed With 360° Revolving Type, Upright-Position Locking, Tilt Tension Adjustment, Seat/Back Tilting Ratio Of 1:3. The Pneumatic Height Adjustment Shall Have An Adjustment Stroke Of 12.0 ±0.3Cm. The Bellow Shall Be 3 Piece Telescopic Type And Injection Moulded In Black Polypropylene. The Pedestal Shall Be Injection Moulded In Black 33% Glass-Filled Nylon-66 And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Shall Be 66.3 ±0.5Cm. Pitch-Center Dia. (76.3 ±1.0Cm With Castors). The Twin Wheel Castors Shall Be Injection Moulded In Black Nylon. Overall Dimensions Of Chair Shall Be Seat Height - Min 42.5 To Max 54.5Cm, Height - Min85.5 To Max 97.5Cm, Width & Depth Of Chair As Measured From Pedestal - Width-76.3 Cm And Depth-76.3 Cm. , Conference Table 14 Seater Conference Table Of The Following Specifications With Overall Size Shall Be 4200 X 1500 X 740.Work Top-Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Conforming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Access Panels Provided With Soft Closing Hinges. Understructure-The Under-Structure Consists Of Mixture Of 25Mm And 18Mm Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Conforming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Anodised Aluminium Alloy 63400 - Wp Profile Is Addedat Bottom Edges For Improving The Aesthetics. The Product Has A Knock-Down Construction. Wire Management-Bottom Cabinet With Door Is Provided For Flow Of Wires And Cables. Cutout Provision Below Access Flap At Four Locations For Standard 8 Module Anchor Roma Is Provided. Beside Eachcutout, An Additional Cutout With Plate Is Provided For Mounting Audio Visual Cables (Eg.Hdmi,Vga-A,Etc).
