|
| 1 | (PWD VOL-I,ITEM NO-1,Page 14 of 315) Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powdered earth or local sand. |
| 2 | (PWD VOL-I,ITEM NO-22 (I),Page 34 of 315) Cement concrete with graded stone ballast (40 mm size excluding shuttering) In ground floor(A) [Pakur Variety](a) 1:3:6 proportion |
| 3 | (PWD VOL-I,ITEM NO-7(a) ,Page 15 of 315) Brick work with 1st class bricks in cement mortar (1:4)a) In foundation and plinth. |
| 4 | (PWD VOL-I,ITEM NO-16 ,Page 16 of 315) 125 mm. thick brick work with 1st class bricks in cement mortar (1:3) in ground floor. |
| 5 | (PWD VOL-I,ITEM NO-1(ii) (b) ,Page 189 of 315)Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (ground floor).(ii) With 1:4 cement mortar (b) 15 mm thick plaster |
| 6 | (PWD VOL-I,ITEM NO-1 , (a) ,Page 99 of 315) M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. I) For structural members of specified sections weighing less than 22.5 Kg./m |
| 7 | (PWD VOL-I,ITEM NO-7 (i) , (a) ,Page 80 of 315) Asbestos corrugated (Trafford or similar approved quality) sheet (6 mm thick) work (excluding the supporting framework) fitted and fixed with 9.5mm. dia. J or L hook-bolt and nuts, limpet and bitumen washers and putty with 150 mm end lap & one corrugation minimum side lap complete. (Payment should be made on area of finished work) |
| 8 | A Display Board with all complete |
| 9 | Add GST @ 18 % |
| 10 | Add Cess @ 1 % |
