Replacement Of Sluice Valve, Nrv And Miscellaneous Works At Kashipur, Eruar And Bhatar Water Supply Scheme Under Cmd P.H.E. Dte.- 1 Kashipur PH-3 2 Supply & delivery of following materials of best quality. 3 80 mm dia Non-risinng sluice valve,(PN-1.0 rating) as per IS14846 .Make-Jupitor/Cair/approved make.TC GC needed 4 supply and fitting fixing of 14 watt Led lamp.(make-Phillips/approve make) 5 Digital Voltmeter 0-500 V.(make-AE/approve make) 6 5/8 X 3 Nut Bolt with double washer 7 12 x 12 Rubber Sheet 8 Labour charges for dismantling of old items andfitting fixing of above item and testing complete as per direciton of EIC. 9 Labour cahrges for painting of existing CIDF items by two coats of enamel paint (Black colour) over a coat of primer as per direction of EIC. 10 Supply & fitting fixing of 45 watt, LED Fixture set for Phillips Model no. BRP 031 LED with 40mm. dia. × 2.5mtr. long G.I pipe bracket fixing on wall of the Pump House with 3nos. M. S. clamp properly grouting including making power connection with supply and drawing 2.5sq.mm. copper flexible cable wire with controlling sub switch and continuous earthing from nearest junction board all complete as per direction of E.I.C. 11 Eruar PH 1 12 Supply & delivery of following materials of best quality. 13 80 mm dia Non-risinng sluice valve,(PN-1.0 rating) as per IS14846 .Make-Jupitor/Cair/approved make.TC GC needed 14 80mm dia. N.R.V (PN-1.0 rating) as per IS5312, Make: IVI/Jupiter/Cair/approved make. MOC & TC needed for valve. 15 supply and fitting fixing of 14 watt Led lamp.(make-Phillips/approve make) 16 TP MCB 40 amp .make-approved make 17 Ø 3 Flanged tail piece 18 102 mm. dia. 0-7 Kg./sq.cm. range, wall mounted pressure gauge (Make: H. Guru/Febig /Approved Make). 19 Labour charges for dismantling of old items andfitting fixing of above item and testing complete as per direciton of EIC. 20 Labour cahrges for painting of existing CIDF items by two coats of enamel paint (Black colour) over a coat of primer as per direction of EIC. 21 Supply & fitting fixing of 45 watt, LED Fixture set for Phillips Model no. BRP 031 LED with 40mm. dia. × 2.5mtr. long G.I pipe bracket fixing on wall of the Pump House with 3nos. M. S. clamp properly grouting including making power connection with supply and drawing 2.5sq.mm. copper flexible cable wire with controlling sub switch and continuous earthing from nearest junction board all complete as per direction of E.I.C. 22 Eruar PH 2 23 Supply & delivery of following materials of best quality. 24 80 mm dia Non-risinng sluice valve,(PN-1.0 rating) as per IS14846 .Make-Jupitor/Cair/approved make.TC GC needed 25 supply and fitting fixing of 14 watt Led lamp.(make-Phillips/approve make) 26 Labour charges for dismantling of old items andfitting fixing of above item and testing complete as per direciton of EIC. 27 Making of tubewell foundation (size- 3x 3x 3.5 approx) as per site situation including supply of necessary materials as bricks, sand, cement, stone chips etc. with plastering & neat cement finishing to complete as per direction. 28 Supply and fitting fixing of Ceiling fan (Make: Usha /Crompton/Havels/ other approvedmake) 1200mm. sweep complete with blade, rubber bush etc. including supply and fixing 2×1/1.4 PVC copper wire for down rod with making necessary connection complete. 29 Labour cahrges for painting of existing CIDF items by two coats of enamel paint (Black colour) over a coat of primer as per direction of EIC. 30 Eruar PH 3 31 Supply & delivery of following materials of best quality. 32 Digital Voltmeter 0-500 V.(make-AE/approve make) 33 Digital Ammeter 0-50 A.(make-AE/approve make) 34 102 mm. dia. 0-7 Kg./sq.cm. range, wall mounted pressure gauge (Make: H. Guru/Febig /Approved Make). 35 Supply and delivery of 100 Amps male female kit Kat fuse unit. 36 Labour charges for dismantling of old items andfitting fixing of above item and testing complete as per direciton of EIC. 37 Making of tubewell foundation (size- 3x 3x 3.5 approx) as per site situation including supply of necessary materials as bricks, sand, cement, stone chips etc. with plastering & neat cement finishing to complete as per direction. 38 Labour cahrges for painting of existing CIDF items by two coats of enamel paint (Black colour) over a coat of primer as per direction of EIC. 39 Eruar PH 4 40 Supply & delivery of following materials of best quality. 41 supply and fitting fixing of 14 watt Led lamp.(make-Phillips/approve make) 42 102 mm. dia. 0-7 Kg./sq.cm. range, wall mounted pressure gauge (Make: H. Guru/Febig /Approved Make). 43 Digital Voltmeter 0-500 V.(make-AE/approve make) 44 Labour charges for dismantling of old items andfitting fixing of above item and testing complete as per direciton of EIC. 45 Labour cahrges for painting of existing CIDF items by two coats of enamel paint (Black colour) over a coat of primer as per direction of EIC. 46 Bhatar zone 1 PH 1 47 Supply & delivery of following materials of best quality. 48 Digital Ammeter 0-50 A.(make-AE/approve make) 49 Labour charges for dismantling of old items from panel andfitting fixing of above item and testing complete as per direciton of EIC. 50 Labour cahrges for painting of existing CIDF items by two coats of enamel paint (Black colour) over a coat of primer as per direction of EIC. 51 Bhatar zone 1 PH 2 52 Supply & delivery of following materials of best quality. 53 supply and fitting fixing of 14 watt Led lamp.(make-Phillips/approve make) 54 Supply and delivery of 100 Amps male female kit Kat fuse unit. 55 Labour charges for dismantling of old items andfitting fixing of above item and testing complete as per direciton of EIC. 56 Labour cahrges for painting of existing CIDF items by two coats of enamel paint (Black colour) over a coat of primer as per direction of EIC. 57 Supply & fitting fixing of 45 watt, LED Fixture set for Phillips Model no. BRP 031 LED with 40mm. dia. × 2.5mtr. long G.I pipe bracket fixing on wall of the Pump House with 3nos. M. S. clamp properly grouting including making power connection with supply and drawing 2.5sq.mm. copper flexible cable wire with controlling sub switch and continuous earthing from nearest junction board all complete as per direction of E.I.C. 58 Bhatar zone 2 PH 1 59 Supply & delivery of following materials of best quality. 60 supply and fitting fixing of 14 watt Led lamp.(make-Phillips/approve make) 61 102 mm. dia. 0-7 Kg./sq.cm. range, wall mounted pressure gauge (Make: H. Guru/Febig /Approved Make). 62 Digital Ammeter 0-50 A.(make-AE/approve make) 63 100 A TPN Main Switch with re-wirable fuse link within sheet steel enclosure(make (Havels/Standard/Approved Make) 64 Labour charges for dismantling of old items andfitting fixing of above item and testing complete as per direciton of EIC. 65 Making brick pillar supporting pipe line (10 x10x 4ft/ Suitable height) by first class brick work with plaster & net cement punning complete including earth cutting, supply necessary materials, ramming as per direction of EIC. 66 Making of tubewell foundation (size- 3x 3x 3.5 approx) as per site situation including supply of necessary materials as bricks, sand, cement, stone chips etc. with plastering & neat cement finishing to complete as per direction. 67 Labour cahrges for painting of existing CIDF items by two coats of enamel paint (Black colour) over a coat of primer as per direction of EIC. 68 Supply & fitting fixing of 45 watt, LED Fixture set for Phillips Model no. BRP 031 LED with 40mm. dia. × 2.5mtr. long G.I pipe bracket fixing on wall of the Pump House with 3nos. M. S. clamp properly grouting including making power connection with supply and drawing 2.5sq.mm. copper flexible cable wire with controlling sub switch and continuous earthing from nearest junction board all complete as per direction of E.I.C. 69 Bhatar zone 2 PH 2 70 Supply & delivery of following materials of best quality. 71 supply and fitting fixing of 14 watt Led lamp.(make-Phillips/approve make) 72 Supply and delivery of 100 Amps male female kit Kat fuse unit. 73 Labour charges for dismantling of old items andfitting fixing of above item and testing complete as per direciton of EIC. 74 Making brick pillar supporting pipe line (10 x10x 4ft/ Suitable height) by first class brick work with plaster & net cement punning complete including earth cutting, supply necessary materials, ramming as per direction of EIC. 75 Making of tubewell foundation (size- 3x 3x 3.5 approx) as per site situation including supply of necessary materials as bricks, sand, cement, stone chips etc. with plastering & neat cement finishing to complete as per direction. 76 Labour cahrges for painting of existing CIDF items by two coats of enamel paint (Black colour) over a coat of primer as per direction of EIC. 77 Bhatar zone 2 PH 3 78 Supply & delivery of following materials of best quality. 79 80 mm dia Non-risinng sluice valve,(PN-1.0 rating) as per IS14846 .Make-Jupitor/Cair/approved make.TC GC needed 80 102 mm. dia. 0-7 Kg./sq.cm. range, wall mounted pressure gauge (Make: H. Guru/Febig /Approved Make). 81 Labour charges for dismantling of old items andfitting fixing of above item and testing complete as per direciton of EIC. 82 Labour cahrges for painting of existing CIDF items by two coats of enamel paint (Black colour) over a coat of primer as per direction of EIC. 83 Bhatar zone 2 PH 4 84 Supply & fitting fixing of 45 watt, LED Fixture set for Phillips Model no. BRP 031 LED with 40mm. dia. × 2.5mtr. long G.I pipe bracket fixing on wall of the Pump House with 3nos. M. S. clamp properly grouting including making power connection with supply and drawing 2.5sq.mm. copper flexible cable wire with controlling sub switch and continuous earthing from nearest junction board all complete as per direction of E.I.C. 85 Supply and fitting fixing of Ceiling fan (Make: Usha /C.G / Havells/ approvedmake) 1200mm. sweep complete with rubber bush, nut, bolt etc. including supply and fixing 2×1/1.4 PVC copper wire for down rod with making necessary connection complete. 86 supply and fitting fixing of 102 mm. dia. 0-7 Kg./sq.cm. range, wall mounted pressure gauge (Make: H. Guru/Febig /Approved Make). 87 Labour cahrges for painting of existing CIDF items by two coats of enamel paint (Black colour) over a coat of primer as per direction of EIC. 88 Bhatar zone 2 PH 5 89 Thorough checking for finding out the faultin Pumping machinery as per direction of EIC. 90 Supply & delivery of thefollowing materials. 91 3 mtr long 80mm dia UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG. 92 1.1 KV grade 4 sq.mm x 3 Core water proof flat submersible cable for above motor. 93 80 mm dia Non-risinng sluice valve,(PN-1.0 rating) as per IS14846 .Make-Jupitor/Cair/approved make.TC GC needed 94 Nylone rope 1 95 Hiring charges of derrick set for withdrawing of pumping machinery as per direction of EIC. 96 Withdrawing of 12.5 HP oldpump-motor setby hired derick arrangement after disconnection of all electircal and pipe line connection completeas per direction of EIC. 97 Installtionof supplied 12.5 HP pumping machinery & above supplied items by hired derick arrangement and making all electrical and pipe line connection complete as per direction of EIC. 98 Labour cahrges for painting of existing CIDF items by two coats of enamel paint (Black colour) over a coat of primer as per direction of EIC. 99 Supply & delivery of following materials of best quality. 100 supply and fitting fixing of 14 watt Led lamp.(make-Phillips/approve make) 101 Supply and delivery of 100 Amps male female kit Kat fuse unit. 102 102 mm. dia. 0-7 Kg./sq.cm. range, wall mounted pressure gauge (Make: H. Guru/Febig /Approved Make). 103 Labour charges for dismantling of old items andfitting fixing of above item and testing complete as per direciton of EIC. 104 Supply and fitting fixing of Ceiling fan (Make: Usha /Crompton/Havels/ other approvedmake) 1200mm. sweep complete with blade, rubber bush etc. including supply and fixing 2×1/1.4 PVC copper wire for down rod with making necessary connection complete. 105 Making brick pillar supporting pipe line (10 x10x 4ft/ Suitable height) by first class brick work with plaster & net cement punning complete including earth cutting, supply necessary materials, ramming as per direction of EIC. 106 Making of tubewell foundation (size- 3x 3x 3.5 approx) as per site situation including supply of necessary materials as bricks, sand, cement, stone chips etc. with plastering & neat cement finishing to complete as per direction. 107 Barabelun PH 1 108 Supply & delivery of thefollowing materials. 109 Supply and delivery of 100 Amps male female kit Kat fuse unit. 110 Digital Ammeter.make-approved make 111 Voltmeter selector switch.make-approved make 112 Service charges for dismantling of damage parts andfitting fixing of above items and testing complete as per direciton of EIC. 113 Labour cahrges for painting of existing CIDF items by two coats of enamel paint (Black colour) over a coat of primer as per direction of EIC. 114 Barabelun PH 3 115 Supply & fitting fixing of 45 watt, LED Fixture set for Phillips Model no. BRP 031 LED with 40mm. dia. × 2.5mtr. long G.I pipe bracket fixing on wall of the Pump House with 3nos. M. S. clamp properly grouting including making power connection with supply and drawing 2.5sq.mm. copper flexible cable wire with controlling sub switch and continuous earthing from nearest junction board all complete as per direction of E.I.C. 116 Labour cahrges for painting of existing CIDF items by two coats of enamel paint (Black colour) over a coat of primer as per direction of EIC. 117 Add GST @ 18% 118 Add Cess @ 1%
