|
| 1 | FLOW METER 510 |
| 2 | NEEDLE VALVE 502 |
| 3 | PRESSURE RELIEF VALVE 504 |
| 4 | FILTER ELEMENT 5 ABSOLUTE |
| 5 | AIR PRESSURE REGULATOR 527 |
| 6 | PRESSURE REDUCER VALVE 503 |
| 7 | AIR PRESSURE GAUGE 531 |
| 8 | PRESSURE GAUGE 517 |
| 9 | PRESSURE GAUGE 516 |
| 10 | PRESSURE GAUGE 539 |
| 11 | PRESSURE GAUGE 532 |
| 12 | PRESSURE GAUGE 537 |
| 13 | PNEUMATIC CONTROL VALVE |
| 14 | AUTO/MANUAL SWITCH |
| 15 | PNEUMATIC CONTROLLER |
| 16 | FUEL DISCONNECT |
| 17 | FILTER |
| 18 | MODULE |
| 19 | O-RING |
| 20 | RELAY |
| 21 | DIODE |
| 22 | FACE-SEAL MATING |
| 23 | RELAY |
| 24 | ISO CHAIN, L=61.25 (102 PITCHES) |
| 25 | WASHER |
| 26 | SHOULDER RING |
| 27 | SCREW CAP |
| 28 | SETSCREW (OPT TO ITEM 90) |
| 29 | BUSHING TEFLON |
| 30 | SEAL AND RETAINER S/A |
| 31 | RETAINER-SEAL AND BEARING |
| 32 | WASHERTHRUST |
| 33 | SEAL, PLAIN ENCASED |
| 34 | WASHER (ORDER NHA ITEM 6) |
| 35 | RAIL |
| 36 | WASHER, FLAT |
| 37 | SCREW |
| 38 | SCREW, CAP, SOCKET HEAD, .1380-32 THD X .750 LG |
| 39 | HOUSING ASSEMBLY |
| 40 | TENSIONING SCREW |
| 41 | BRACKET |
| 42 | CHAIN WHEEL |
| 43 | AXLE |
| 44 | WASHER |
| 45 | NAME PLATE |
| 46 | SUBASSY, SWITCH (S3) ATTACHING PARTS |
| 47 | BOX ASSEMBLY |
| 48 | CONNECTOR CIRC. MOUNT |
| 49 | SWITCH SUBASSY (S4) ATTACHING PARTS |
| 50 | CYLINDER |
| 51 | PISTON |
| 52 | END CAP, OIL |
| 53 | END CAP, AIR |
| 54 | END CUP |
| 55 | NAMEPLATE |
| 56 | BLOCK ASSEMBLY |
| 57 | BODY (PART OF ITEM 16.1) |
| 58 | SPOOL AND SLEEVE ASSEMBLY |
| 59 | SLEEVE |
| 60 | SPOOL AND SLEEVE ASSEMBLY |
| 61 | SPOOL |
| 62 | GEAR, WORM ATTACHING PARTS |
| 63 | PLUG |
| 64 | PIN |
| 65 | COVER ATTACHING PARTS |
| 66 | SLEEVE |
| 67 | PLATE, COVER ATTACHING PART |
| 68 | NEEDLE, VALVE, ASSEMBLY |
| 69 | PLATE, COVER ATTACHING PARTS |
| 70 | IT IS A SUB-ASSEMBLY OF HYDRA ULIC FLOW REGULATOR |
| 71 | LABEL |
| 72 | CAP-PORT S/A |
| 73 | PLATE CAM |
| 74 | NAME PLATE |
| 75 | NAME PLATE |
| 76 | SLEEVE |
| 77 | COVER |
| 78 | BODY |
| 79 | SHAFT, SPLINED |
| 80 | BODY, ASSEMBLY |
| 81 | CAM AND PISTON S/A |
| 82 | PISTON AND SHOE S/A |
| 83 | BEARINGBARREL |
| 84 | BARREL-CYLINDER |
| 85 | MOUNTING FLANGE S/A |
| 86 | PIN-CAM INDEX |
| 87 | FRONT HOUSING S/A |
| 88 | SHAFT AND BEARING S/A |
| 89 | COLLAR-HOLD DOWN |
| 90 | SHAFT- INTERNAL DRIVE |
| 91 | BUSHING- SPLINE |
| 92 | SPRING-HELICAL COMPRESSION |
| 93 | PLATE- HOLD DOWN |
| 94 | SPACER, BUSHING |
| 95 | CUP (ORDER NHA ITEM-6) |
| 96 | ACTUATOR ASSY |
| 97 | SHAFT ASSY |
| 98 | SWITCH ASSY (S2) ATTACHING PARTS |
| 99 | BODY |
| 100 | MOTOR, MACHINED |
| 101 | CAM |
| 102 | CAM |
| 103 | SHAFT |
| 104 | PLUG |
| 105 | COVER, MOTOR ATTACHING PARTS |
| 106 | HEX ATTACHING PARTS |
| 107 | COVER |
| 108 | COVER ATTACHING PARTS |
| 109 | COVER ATTACHING PARTS |
| 110 | TUBE |
| 111 | SHAFT, SPLINED |
| 112 | PLATE, SWITCH |
| 113 | STAND OFF ATTACHING PARTS |
| 114 | SPACER |
| 115 | STAND OFF |
| 116 | Gasket |
| 117 | TERMINAL (96736 SCD 99-1008-3) |
| 118 | TERMINAL (96736 SCD 99-1008-2) |
| 119 | BOX ASSY |
| 120 | BOX ASSEMBLY |
| 121 | WORM, MACHINED |
| 122 | MODULE |
| 123 | CONNECTOR ATTACHING PARTS |
| 124 | RECEPTACLE |
| 125 | IT IS A SUB-ASSEMBLY OF LIGHT CONTROL BOX |
| 126 | SWITCH, MICRO |
| 127 | RELAY,2 PDT,TYPE I ATTACHING PARTS |
| 128 | PIN, STRAIGHT, 0937 DIA ATTACHING PARTS |
| 129 | RELAY |
| 130 | SCREW-SOCKET HEAD CAP (AP) |
| 131 | WASHER, WAVE (96736 SCD 99-1011-2) |
| 132 | SPOOL AND PISTON SUBASSEMBLY |
| 133 | SPOOL; COMPENSATOR(MATCHED SET ORDER NHA ITEM-290) |
| 134 | PISTON, STROKING |
| 135 | PISTON, RATE |
| 136 | BARREL CYLINDER |
| 137 | PISTON, BLOCKING 9MATCHED SET ORDER NHA) |
| 138 | PORT CAP |
| 139 | BEARING, CYLINDER BARREL |
| 140 | ELBOW |
| 141 | FLANGE- MOUNTING |
| 142 | PACKING, PERFOR MED |
