|
| 1 | Material and labour for replacing the following unserviceable parts of CHAIR DINING FD-16/228/279 with new parts made out of first class hard wood (Teak Wood)dimension, size, pattern of the parts shall be same as the existing type all as shown on drawing/specification and applying french polish one or more coats, finish shall be uniform texture and high gloss to match with the existing surfaces including preparation of surfaces with sand paper, levelling the surfaces with filler material like bees wax,chalk powder etc., mixed with polish complete all as specified and as directed |
| 2 | Replacing of rear leg of size 55 x 30mm 890mm. |
| 3 | Replacing of front legs size 55x30mmx460mm. |
| 4 | Replacing of side rails of seat frame size 30x65mmx430mm long. |
| 5 | Material and labour for replacing the following unserviceable parts of CHAIR WRITING FD-250/280 with new parts made out of first class hard wood (Teak Wood)dimension, size, pattern of the parts shall be same as the existing type all as shown on drawing/specification and applying french polish one or more coats, finish shall be uniform texture and high gloss to match with the existing surfaces including preparation of surfaces with sand paper, levelling the surfaces with filler material like bees wax,chalk powder etc., mixed with polish complete all as specified and as directed |
| 6 | Replacing of rear legs of size 30x55mm, 890mm long. |
| 7 | Replacing of front legs of size 30x55mm, 460mm long. |
| 8 | Replacing of side rails/back rails of seat frame of size 30x65mm, 470mm long. |
| 9 | Replacing of front rails of seat frame of size 30x65mm, 535mm long. |
| 10 | Material and labour for replacing the following unserviceable parts of CHAIR EASY FD-17/229 with new parts made out of first class hard wood (Teak Wood)dimension, size, pattern of the parts shall be same as the existing type all as shown on drawing/specification and applying french polish one or more coats, finish shall be uniform texture and high gloss to match with the existing surfaces including preparation of surfaces with sand paper, levelling the surfaces with filler material like bees wax,chalk powder etc., mixed with polish complete all as specified and as directed |
| 11 | Replacing of rear legs of size 55x25x300mm long. |
| 12 | Replacing of front legs of size 55x25x300mm long |
| 13 | Replacing of side rails of seat frame of size 70x40mmX300mm long. |
| 14 | Replacing of had rest of size 65 x25mmx610mm long |
| 15 | Material and labour for replacing the following unserviceable parts of TABLE DINING FOR 6 PERSFD-273 with new parts made out of first class hard wood (Teak Wood)dimension, size, pattern of the parts shall be same as the existing type all as shown on drawing/specification and applying french polish one or more coats, finish shall be uniform texture and high gloss to match with the existing surfaces including preparation of surfaces with sand paper, levelling the surfaces with filler material like bees wax,chalk powder etc., mixed with polish complete all as specified and as directed |
| 16 | Replacing of side rails of frame of size 100x25x900mm |
| 17 | Replacing of front/back rails of frame 100x25x1500mm |
| 18 | Replacing of legs of size 40x75mmx760mm |
| 19 | Replacing of stiffener 100x25mmx1500mm long. |
| 20 | Replacing of top made out of 18mm thick particle board exterior grade with phenol formal dehyde BWP with 1.5mm thick decorative laminated sheet with teak shade fixed in one side and the other side of partical board (bottom) shall be white painted and all as directed by engineer in charge. |
| 21 | Material and labour for replacing the following unserviceable parts of TABLE DINING FOR 8 PERSFD-273 with new parts made out of first class hard wood (Teak Wood)dimension, size, pattern of the parts shall be same as the existing type all as shown on drawing/specification and applying french polish one or more coats, finish shall be uniform texture and high gloss to match with the existing surfaces including preparation of surfaces with sand paper, levelling the surfaces with filler material like bees wax,chalk powder etc., mixed with polish complete all as specified and as directed |
| 22 | Replacing of rear legs of size 55x25x300mm long. |
| 23 | Replacing of front/back rails of frame 100x25x1800mm |
| 24 | Replacing of legs of size 40x75mmx760mm |
| 25 | Replacing of stiffener 100x25mmx1800mm long. |
| 26 | Replacing of top made out of 18mm thick particle board exterior grade with phenol formal dehyde BWP with 1.5mm thick decorative laminated sheet with teak shade fixed in one side and the other side of partical board (bottom) shall be white painted and all as directed by engineer in charge. |
| 27 | Material and labour for replacing the following unserviceable parts of TABLE DRESSING LADIESSFD-32 with new parts made out of first class hard wood (Teak Wood)dimension, size, pattern of the parts shall be same as the existing type all as shown on drawing/specification and applying french polish one or more coats, finish shall be uniform texture and high gloss to match with the existing surfaces including preparation of surfaces with sand paper, levelling the surfaces with filler material like bees wax,chalk powder etc., mixed with polish complete all as specified and as directed |
| 28 | (a)S & F in repairs table top of Table dressing ladies with 18 mm thick pre-laminated particle Board of approved make, all as specified on drawing or as directed by Engineer-in-charge. |
| 29 | (b)S&F in repairs new Glass shuttrs of Table dressing ladiesall as specified on drawing or as directed by Engineer-in-charge.(Each glass shutter shall be measured as single unit) |
| 30 | (c)Removing the existing unserviceable Aluminium channel of glass shutter and S & F in repairsAluminium Channel all as specified on drawing or as directed by Engineer-in-charge. |
| 31 | (d)S & F in repairs new back suport made out of 6 mm thick plywood for mirror of Table dressing ladies all as specified on drawing or as directed by Engineer-in-charge. |
| 32 | (e)S & F in repairs new mirror5 mm thick for Table dressing ladies ofapproved make with complete frame back all as specified on drawing or as directed by Engineer-in-charge. |
| 33 | BED WITH PLYWOODFD -246Removing/replacing existing unserviceable plywood from bedand supply & fix new plywood of 12mm thick BWR grade as shown on drawing and fixed by means of screw/adhesive etc completed all as directed. |
| 34 | REPAIR TO GI CHARPOYS FD -220 Removing existing damaged/unserviceable plywood 12mm thick from GI Charpoy and supply and fix new 12mm thick plywood BWR grade of size 2100mm x 900mmfixed with flat head nut, bolt of size 6mm dia 75mm long with 3mm thick washer (Total 08 Nos per charpoy) duly drilling hole in ply wood and steel frame of charpoy (02 Nos each to long rails and 02 Nos each to short rails), (Make of plywood : Archid/Green ply/Kitply (with QR code) (IS-303) |
| 35 | REPAIR TO GI CHARPOYS FD -220Removing existing broken/damaged MS flat iron and supply and fix MS flat iron 50mm x 6mm thick, 895mm long drilled/welded to long rail both side in equal distance and painting two coats of synthetic enamel paint black colour over a coat of red oxide to the stiffners, all as specified and directed by GE/Engr-in-Charge. |
| 36 | PEG TABLE (FD-236/277) Removing and Replacing of top for Table PEGFD-236/277 made out of 18mm thick particle board exterior grade and supply & fix new particle board with phenol formal dehyde BWP with 1.5mm thick decorative laminated sheet with teak shade fixed in one side and the other side of particle board (bottom) shall be white painted. |
| 37 | PEG TABLE (FD-236/277) Replacing of legs |
| 38 | SOFA SET 4/5 SEATER FD-281/373Removing the existing unserviceable cloth tapestry from sofa set 4/5 seaterCushions(FD-281/373) and supply and fix new cloth tapestry of approved quality and stitching to the required shape with one side chain and design of foam rubber cushion and fixing to the sofa all as directed by Engineer in Charge.The tapestry cloth got approved by AGE (I) AF. |
| 39 | SOFA SET 4/5 SEATER FD-281/373Removing the existing unserviceable foam rubber of size 100mmx525mmx550mm from sofaset 4/5 seater (FD-373/281) and provide 32/40 density of foam rubber cushion of sizes 100mmx525mmx550mm foam rubber and prefixed to the sofa as directed by Engineer in Charge.The item got approved by AGE (I) AF Chimney hills |
| 40 | CANNING OF REPAIRED FURNITURE : Re - Caning of furniture such as chair of seats/backs with 1.8x0.46 mm plastic cane of approved quality with bordering of 3 x 0.6 mm width plastic cane all alongwith the frame (as ordered). |
| 41 | Material and labour for cleaningthe surfaces and removing stains using sand paper, filling cavities, cracks with approved filler material like bees wax, raw-zina, chalk powder etc., mixed with polish, applying high gloss french polish, till the final glossy finish and uniform texture is achieved (undersides/hidden portion directly not visible shall be excluded) for the following items of furniture complete all as specified and as directed. |
| 42 | Bed with plywood top FD-246 |
| 43 | Chair Easy cushioned |
| 44 | Chair witing FD-250/280 |
| 45 | Chair Dining FD-16/228/279 |
| 46 | Chair Easy FD 17/229 |
| 47 | Chair WBB FD-225 |
| 48 | Cap stand with Mirror SPL |
| 49 | Peg table FD-236/277 |
| 50 | Sofa set 5 seater FD-373 |
| 51 | Sofa set 4 seater FD-281 |
| 52 | Stool Dressing FD-232 |
| 53 | Table 5’x2’-10” F-1 |
| 54 | Teapoy FD-232 |
| 55 | Form with back FD-78. |
| 56 | Table center FD-274. |
| 57 | Table bedside FD-276. |
| 58 | Table centre 2 tire SPL. |
| 59 | Table conference ‘U’ Shape SPL. |
| 60 | Table dressing with mirror gents FD-37 |
| 61 | Table dining 6 Pers FD -239/273. |
| 62 | Table dining for 8 pers FD-239/273. |
| 63 | Table writing Med DB-3982. |
| 64 | Table Writing FD-275. |
| 65 | Side board FD-241/372. |
| 66 | Table dressing with mirror ladies FD-373. |
| 67 | Chair dining with long back FD-357 |
