|
| 1 | Assisting dept. technicians in attending day to day breakdowns,opeartion and maitenance under the supervision ofdept. shift in charge as per tender specifications and asinstructed by E.I.C |
| 2 | Complete cleaning of substations rooms,Electrical rooms,DGset rooms/yards inside and outside, outer surface of electricalpanels/equipment, substation premises transformer yards asper attached list including of cutting of vegetation aroundrooms as instructed,including sweeping of floors/walls/ceiling, mopping of floors, cutting of grass /treebranches near substation premises, transformer yard and alsodisposing the same,shifting of scrap materails at various placesto central place using hand cart and as per instruction of EIC.Note:a)The contractor has to arrange all consumable materialssuch as heavy duty vacuum cleaner,brooms, bleachingpowder, mopping sticks, choppers, buckest and cloths etc.for carrying out the work.b) Semi skilled labour shall be deputed for the work andthe manpower shall have basic knowledge about electricalinstallation and safety.c) The report shall be submitted to shift-in-charge and alsoget the report certified by shift in charge |
| 3 | Cleaning of substations rooms,DG set rooms/yards inside andoutside, outer surface of electrical panels/equipment,substation, DG room/yard premises, transformer yard etc.Approx. size of Substation, DG set room/Yard is ranging from6M x 4M to 30M x 20 |
| 4 | Cleaning of Electrical rooms inside and outside, outer surface ofelectrical panels/equipment etc.approx. size of electrical roomis ranging from 3M x 2M to 6M x 4M |
| 5 | Cleaning of Electrical rooms/meter rooms at Vajra Bldg. outersurface of electrical panels/equipment etc.approx. size ofelectrical room is ranging from 2M x 3M to 2M x 6M |
| 6 | Supply, installation of RCBOs for day to day maintenance(installation of parts is covered under item no. 1) |
| 7 | 63 A FP, 30mA sensitivity,AC type |
| 8 | 40 A FP, 30mA sensitivity,AC type |
| 9 | 25 A, DP, 30mA sensitivity,AC type(compact 2module) |
| 10 | 32 A, DP, 30mA sensitivity,AC type(compact 2module) |
| 11 | 40A,DP, 30mA sensitivity,AC type |
| 12 | 63A,FP, 300mA sensitivity,AC type |
| 13 | Supply, installation of MCBs & enclosures for day to daymaintenance (installation of parts is covered under itemno. 1) |
| 14 | 40A-63A FP, 10kA,MCB |
| 15 | 40A-63A,SP,MCB |
| 16 | 40A-63A,DP,MCB |
| 17 | Enclosure for DP/FP MCB |
| 18 | Enclosure for FP RCBO\"s |
| 19 | Supply, installation of SFU & Isolators for day to daymaintenance (installation of parts is covered under itemno. 1) |
| 20 | FN (SK95651)/FNX 63 |
| 21 | Supply, installation of Fuse links for day to daymaintenance (installation of parts is covered under itemno. 1) |
| 22 | 63A bolted type HRC fuse |
| 23 | 32A,bolted type HRC fuse |
| 24 | 6-32A HF type |
| 25 | 63A HF type |
| 26 | 80A,bolted type HRC fuse |
| 27 | Supply, installation of 3 Pole MCCB for day to daymaintenance (installation of parts is covered under itemno-1) |
| 28 | MCCB (TYPE: LM630B) MCCB with electronic trip release |
| 29 | Supply, installation of Fuse bases for day to daymaintenance (installation of parts is covered under itemno. 1) |
| 30 | HK 32B of M/s L&T make |
| 31 | HK 63B of M/s L&T make |
| 32 | HK 32H of M/s L&T make |
| 33 | HK 63H of M/s L&T make |
| 34 | HK 125B of M/s L&T make |
| 35 | Supply, installation of Indication lamps for day to daymaintenance (installation of parts is covered under itemno. 1) |
| 36 | 48V,DC/110V,DC/230V,AC LED indicationlamp(green/red/Yellow/amber) |
| 37 | 48V,DC/110V,DC/230V,AC LED indication lamp(White/Blue) |
| 38 | Supply, installation of Wires & cables for day to daymaintenance (installation of parts is covered under itemno. 1) |
| 39 | FRLS garde PVC insulated 6 sq.mm flexible copper wire |
| 40 | FRLS garde PVC insulated 10 sq.mm flexible copper wire |
| 41 | single core 25sq.mm Cu. Multi stranded PVC insulated cable |
| 42 | single core 35sq.mm Cu. Multi stranded PVC insulated cable |
| 43 | single core 50sq.mm Cu. Multi stranded PVC insulated cable |
| 44 | Lugs supply, instllation of \"lugs\" for day to daymaintenance (installation of parts is covered under itemno 1) |
| 45 | 6sq.mm/10sq.mm heavy duty copper tube terminals |
| 46 | 16sq.mm/25sq.mm heavy duty copper tube terminals |
| 47 | 35sq.mm/50sq.mm heavy duty copper tube terminals |
| 48 | 70sq.mm/95sq.mm heavy duty copper tube terminals |
| 49 | 120 sq.mm/185sq.mm heavy duty copper tube terminals |
| 50 | 240sq.mm/300sq.mm |
| 51 | Supply, installation of copper heavy duty in-lineconnectors for day to day maintenance (installation ofparts is covered under item no. 1) |
| 52 | 6sq.mm/10sq.mm |
| 53 | 16sq.mm/25sq.mm |
| 54 | 35sq.mm/50sq.mm |
| 55 | 70sq.mm/95sq.mm |
| 56 | 120sq.mm/150sq.mm |
| 57 | 185sq.mm |
| 58 | 240sq.mm/300sq.mm |
| 59 | Supply, installation of Direct operated (direct mounting oncontactors) over load realy for L&T make Power air breakcontactors for day to day maintenance (installation ofparts is covered under item no. 1) |
| 60 | RTO-1 (2.4-3.6A) |
| 61 | RTO-2 (40-57A)60HP |
| 62 | RTO-3(75-110) 100HP |
| 63 | SPP relay with 2NO + 2NC(VSP-D2) |
| 64 | SPP D2 MPR1 (Simillar to Make: M/s Minilec ) |
| 65 | Supply, installation of Power Contactor of M/s L & T makefor day to day maintenance (installation of parts iscovered under item no. 1) |
| 66 | MO-80 |
| 67 | Supply, installation of Spares of Power Contactor of M/s L& T make for day to day maintenance (installation of partsis covered under item no. 1) |
| 68 | Front mounting Add on block MN A1 |
| 69 | Front mounting Add on block MNX A2 |
| 70 | Side mounting aux add on block for MNX95-650 |
| 71 | TOP mount ADD ON BLOCK 2NO FOR MO-9-110, MO-0CONTACTOR |
| 72 | TOP mount ADD ON BLOCK 2NO+2NC FOR MO-9-110, MO-0CONTACTOR |
| 73 | TOP mount ADD ON BLOCK 1NO+1NC FOR MO 9-110, MO-0CONTACTOR |
| 74 | Side mount ADD ON BLOCK 1NO+1NC FOR MO 9-110, MO-0CONTACTOR |
| 75 | Supply, installation of Connectors for day to daymaintenance (installation of parts is covered under itemno. 1) |
| 76 | CTS 10 |
| 77 | CSTSN5 with partition plate |
| 78 | CSTSN6 with pattition plate |
| 79 | CST RN5/RN6 with end plate |
| 80 | CTS 35L with partition plate |
| 81 | CTS 70L with partition plate |
| 82 | CST 95L |
| 83 | CBB 150 with partition plate |
| 84 | CBB 185 with partition plate |
| 85 | CBTDU4/CMDT4 |
| 86 | Supply of Lighting fixture |
| 87 | Triglow 18 meters LED strip of Make Philips |
| 88 | Warm profile light 5 meters strip of Simillar make M/s Philips |
| 89 | Insulation mat class-A,2mm thick as per IS 15652 |
| 90 | Fabrication, supply, installation, Testing & commissioning of14SWG M.S CRCA sheet hot dipped galvanised cover/ Glandplates of required size for meter box/MDB/Feeder pillars ect.With suitable sizes of cable gland holes, including fixing withsuitable sizes of screws etc.& as instructed by Engineerincharge.Note:- Scope also includes disconnection & connection ofvarious sizes of existing cables. |
| 91 | Supply, installation, testing and commissioning of earth stationwith heavy dipped GI earth plates electrode 600 x 600 x6.0 mmin size at the depth minimum of 2.5 m below ground level(bottom of Plate) confirming to IS 3043 complete withallrequired materials like coke / charcoal, salt, G.I nut bolts,washers, 19 mm dia GI pipe (B class), 150 mm thick concretewall chamber of suitable size duly plastered, heavy duty(minimum 6 mm thick) M.S chequred plate cover associatedmaterials like 40 x 40 x 5 mm angle iron frame work, hingedlocking arrangements, complete with funnels, GI test links (50 x6 mm), two runs of 25 x 6mm G.I strips for connecting G.I plate& test link etc. including excavation of ground in all types ofsoils, refilling & removal of excess earth within a radius of 3000m etc. all as required as per thedrawing specifications &instructed by Engineer-in-charge.Note:-The chamber cover & frame shall be got approved byDepartment & painted with two coats of red oxide & one coat ofenamel paint. |
| 92 | Supply, installation of heavy dipped following GI strip fixed towall / slab / column / beam with 2mm thick GI saddle or inground at a depth of 750 mm below ground level includingexcavation in all type of soil, refilling and removal of excessearth within a radius of 500 mtrs., temporary reinstatementand back filling of trench, interconnection of earth strip bywelding,applying cold zinc spary, painting with two coats ofblack bituminous compound for earth strip in ground and greencolour enamel painting strip on surface etc. all as required &instructed by the Engineer-in-charge |
| 93 | 25X 3mm in ground |
| 94 | 25x6mm in ground |
| 95 | 25X 3mm on Wall/coloum/beam/bus ducts |
| 96 | 25x6mm on Wall/coloum/beam/bus ducts |
| 97 | Providing earth pit chamber made up of 150 mm thickconcrete wall chamber of suitable size duly plastered,heavy duty (minimum 6 mm thick) M.S chequred platecover associated materials like 40 x 40 x 5 mm angle ironframe work, hinged locking arrangements etc. Scope ofwork also includes breaking of existing earth pit chamberand disposing of debries. |
| 98 | Excavation |
| 99 | Excavation in soft soil/murum includingshorting or dewatering, removing ofbricks/tiles etc.,disposing the excessearth within the radius of 3000 m,refilling, consolidation of surface etc.as required & as directed by Engineer-incharge. |
| 100 | Removal of pevar block / shahbaz stone /existing drain wells & refixing as peroriginal as required & as directed byEngineer-in-charge. |
| 101 | Providing plain cement concrete 1:3:6 usinggraded stone aggregate of includingconsolidation, frame work & shuttering asrequired ,finishing, curring etc. as perspecification & as directed by EIC. |
