Tender For Construction Of Dressing Room, Toilet And Shed In The Playground In Village Deori
Tender Value
13.98 Lakhs
Estimated cost
Bid Submission
05 Jun 2025
0 days left
EMD
28000
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
robertsganj → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction of dressing room, toilet and shed in the playground in village Deori
BOQ
| Sl. No. | Item Description |
| 1 | Laying and Jointing PVC Pipe. Heading |
| 2 | Clearing of grass and jungle area andremoval of rubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per DSR SI. No. 2.32. |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.as per DSR 2.6.1 |
| 4 | Local Sand filling for black cotton soili/c supply of all material,leveling,dressing ,remaning properly with watering etc all complete.as per DSR SI. No. 2.27 |
| 5 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) all complete.as per DSR SI.No. 4.1.8 |
| 6 | Coursed Rubble Masonary (2nd short ) with hard stone in foundation and plinth with Cement mortar 1:6 ( 1 cement :6 coarse sand ) DSR Sl. No. 7.7.1 |
| 7 | Brick work withcommon brunt clay ( non modular ) bricks of class -150 in foundation and plinth in cement mortar 1:4 ( 1 cement:4 coarse sand ) as per DSR Sl. No -6.1.1 |
| 8 | Brick work withcommon brunt clayF.P.S. ( non modular ) bricks of class -designation 7.5 insuperstructure above plinth level up to floor V level in all shapes and sizes in cement mortor 1:6 ( 1 cement:6 coarse sand )i as per DSR Sl. No -6.4.2 |
| 9 | Cartage of Earth from 2.00km distance Filling available excavated earth ( excluding rock) in trench, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift.DSR Sl No. 2.25 |
| 10 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :as per DSR Sl. No -5.1.2 |
| 11 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves,chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarsesand(zone-III) derived from natural sources : 3 graded stone aggregate20 mm nominal size derived from natural sources).:as per DSR Sl. No -5.30 |
| 12 | MS iron work for RCC Work i/c cutting,bending and moulding all complete as per DSR 5.22.6 |
| 13 | Centering and shuttering including shutting, propping etc. and removal of from for Lintels, beams,plinth beams,column, girders,bressumers and canilevers DSR Sl. No. 5.9.5 |
| 14 | Centering and shuttering including shutting, propping etc. and removal of from for Suspended fploors, roof, landings, balconies and access plateformDSR Sl.No. 5.9.3 |
| 15 | Providing and laying in position cement concrete of specified grade excluding the cost of centering snd shuttering - All work up to plinth level: 1:2:4 ( 1 cement:2 coarse sand (zone !!!) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources )DSR Sl.No. 4.1.3 |
| 16 | Providing and laying vitrifiedttiles in floor in different size ( thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to I.S. 15622, of approved make, in all colours &shades, laid on 20 mm thick cement slurry @ 3.3 kg/ sqm including grouting thejoints with white cement and matching pigment etc, complete . Size of Tile 600x600 mm DSR Sl.No. 11.41.2 |
| 17 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in Chargein skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement:3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. as per DSR Sl.No. 11.37A |
| 18 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle section of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x5 mm flat piees to the existing T-iro frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-in-charge.DSR Sl.No. 10.31 |
| 19 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, allnecessary fittings complete,i/c applying a priming coat of approved steel primer.all complete as per DSR SI No.10.5.1 |
| 20 | 12mm thick plaster with cement and c/sand sand in 1:4 including labour material & T&P etc as per DSR 13.4.1.Plain serface |
| 21 | 15 mm cement plaster on rough side of half brick walls of mix: 1:6 ( 1 cement:6 coarse sand ) DSR Sl. No. 13 .5. 2. Internal Plaster at rough serface |
| 22 | 12mm thick plaster with cement and coarse sand in 1:3 including labour material & T&P etc.complet.as per DSR SI.No 13.7.1 |
| 23 | Providing & fixing PVC pipes conforming to IS make workinh pressure 6 Kg/cm² i/ctesting, labour, T&P and all complete fittings. 75mm dia As per Code No.12.41.1 |
| 24 | Providing and fixing M.S. fan clamp Type 1 or !!Of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs during laying, including painting the exposed portion of loop, all as per standard design complete DSR Sl. No. 10.17 |
| 25 | Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete DSR Sl. No. 13.80 |
| 26 | Finishing Walls with Acrylic Smooth exterior paint of required shade : New work ( Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre /10 sqm ) DSRSl. No. 13.46.1Two coats |
| 27 | Painting with Synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on New work over an under coat of suitable shade with ordinary paint of approved brand and manufacture as per DSRSl. No. 13.62.1 |
| 28 | SANITARY WORK |
| 29 | P/F of water closet squatting pan (Orissa type W.C. pan size 580x440mm) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: as per DSR SI.No.17.1.1 |
| 30 | Providing & fixing PVC pipes conforming to IS make workinh pressure 6 Kg/cm² i/ctesting, labour, T&P and all complete fittings. 100mm dia As per Code No.12.41.2 |
| 31 | P& F of 15 mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.As per DSR SI.No.18.8.1 |
| 32 | P& F of 25 mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.As per DSR SI.No.18.8.3 |
| 33 | P/F of15 mm dia uplasticised PVC connection pipe with brass unions all complete as per DSR SI.No.18.21.1.1 |
| 34 | S/F of CP brass bid cock 15mmdia nominal bore all complete.as DSR SI.No.18.49.1 |
| 35 | S/F of CP brass stop cock 15mmdia nominal bore all complete.as DSR SI.No.18.52.1 |
| 36 | P&F ofwash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:as DSR SI .No .17.7.4 |
| 37 | P/f of600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.as DSR SI .No .17.31 |
| 38 | P/ placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.as DSR SI .No .18.48 |
| 39 | Supply & fixing of Display Board/ Granite stone I/c writting etc. I/c labour material and T&P etc. |
| 40 | ELECTRIFICATION WORK |
| 41 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. DSR-22 E & MCode no. 1.10.1 |
| 42 | Supplying and fixing brass batten/ angle holder including connection etc. as required. DSR-22 E&M Code no. 1.34 |
| 43 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire. DSR-22 E&M Code no.1.14.1 |
| 44 | S/F of metal Box 200x250x60 mm size with siutable size of phenolic laminated sheet cover all comlete as per DSR-22 E&M Code no.1.22.9 |
| 45 | S/F of metal Box 250x300x100 mm size with siutable size of phenolic laminated sheet cover all comlete as per DSR-22 E&M Code no.1.22.16 |
| 46 | Supply, installation ,testing and commisioning of 1200 mm sweep ,BEE 5star rated ,ceilling fan with brush less direct current (BLDC) Motar , class of insulation B , 3 Nos ,blades , 30 cm long down rod , 2 nos canopies ,shacle kit safty rope , copper winding ,power factore not less than 0.9service value (cm/m/w) minimum 6.00 AIR deliver minimum 210 cum/min ,350 RPM (TOLERANCE AS PER IS:374-2019) THD less than10 % remote or electronic regulator unit for speed control and all remainning accessories i/c saftey oin , nut bolts washers temperature rise =75 degree C(max ) insulation resistance more than 2 mega ohm suitable for 230v 50 hz single phase AC supply ,earthing etc. complete as required .DSR (E&M) No. 19.1 |
| 47 | Supply and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connection but excluding modular plate etc. as required . DSR No. 1.25 |
| 48 | Supply and Fixing of recess/Surface/Pendant mounting round 6 watt 8 watt LED down Lighter having powder Coated die cast aluminium housing with heat sink ,diffuser /Reflectorand driver Set complete in all respect CAT-AAA MR |
| 49 | S/F ofpiano type switch / socket on the existing switch box/cover i/c connection etc asrequired all complete. As per DSR 22 E&M Code No. 1.23.1 |
| 50 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissi -oning etc. as required. Single pole. DSR-22 E&M Code no. 2.10.4 |
AI Tender Summary
Tender Timeline
May 22, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedJun 05, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 06, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender