|
| 1 | M&L for supply, fabrication & Installation of Sliding Gate (Stainless Steel frame with powder coated Aluminium Louvers 7.0 metre long 2.10 metre height including cutting/ demolition surface of road/PCC for MS rail track channel, supply & fixing and installation of new MS rail track channel with running wheel 05 Nos, top small roller 38 Nos bottom roller 02 Nos installation of sliding gate & making good to disturbed surfaces of road to match the existing complete all as specified & directed.Note: Irrespective of the specified above, the following shall deemed to be included in quoted rates, nothing extra shall be admissible:-(a) The gate shall be fabricated exactly of same design, size of members/ towers etc and specifications as per SOP Gate at Cabinet Sectt.(b) All painting MS work shall be painted with two coats of synthetic enamel paint over one coat of red oxide primer.(c) All movable parts shall be duly applied with grease. |
| 2 | Notes:- (d) Supply, fixing & install in replacement central geared elect motor 3 phase, 415 Volt, AC 50 Hz supply having suitable capacity of maximum lifting weight upto 600 kgs with built in reduction gear and limit switch opearting by means of operated switch incl cable of required size & length etc. suitable for sliding gate of size upto 15 Sqmtr & Sensor etc. Make : TATA/STRONG LIFE/FAAC(e) All minor parts, Nuts, bolts, washers and other consumable items of required size to make the sliding gate functional.(f) Contractor shall visit the site before quoting the rate to make himself conversent with design & specifications of existing gate. Nothing extra shall be admissible in any case. |
| 3 | Excavating in trenches in hard/dense soil, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. nexc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and as directed. |
| 4 | Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface for hard and dense soil complete all as specified and directed. |
| 5 | S&F mild steel plate (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes with welded attachment to GI pipe in base/connections etc confirming to Fe-290 (Gde-165) complete all as specified and as directed. |
| 6 | M&L for plain cement concrete as in foundation filling and mass concrete typeD-21:4:8 (40mm graded stone aggregate) complete all as specified and directed. |
| 7 | M&L for brick work with sub-class B bricks straight or curved on plan built in cement mortar (1:6) complete all as specified and directed. |
| 8 | M & L for 15mm thick rendering on fair faces of brick / concrete surfaces in Cement Mortar 1:4, surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 9 | M & L for RCC (Nominal Mix) type B1 1:2:4 Using 20mm graded stone aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. |
| 10 | S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290Gde-E-165 complete all as specified and directed. |
| 11 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixingusingFe-290 (Gde-E-165) complete all as specified and directed. |
| 12 | M&L for preparing steel and iron surfaces ofany description, over 10cm in width or girth, not otherwise described, applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 13 | M & L for preparing the newly plastered wall surface and applying two coats of cement base pant over one coat of alkali resistant primer complete all as specified and directed. |
| 14 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed. |
| 15 | M&L for 40 mm thk PCC 1:2:4 type B-012.50 mm graded crushed stone aggregate) as in Damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and directed. |
| 16 | M&L for filling under the floors using approved excavated soil including watering, ramming spreading in layers not exc 25 cm thick complete all as specified and directed. |
| 17 | M&L RCC 1:2:4 type B-1 (nominal mix) using 20mm graded crushed stone aggregate as inlintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 18 | M&L RCC 1:2:4 type B-1 (nominal mix) using 20mm graded crushed stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 19 | M&L for use & waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), rough finished complete. |
| 20 | M&L for use & waste of Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofsexc 10 cm but m.exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work, rough finished complete all as specified and directed. |
| 21 | S&F Mild steel TMT bars 5mm to 10 mm dia as in stirrups, spacers and binders and binding with and including mild steel wire (annealed) not less than 09mm dia or securing with clips complete all as specified and directed. |
| 22 | S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, incluidng cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 09mm dia or securing with clips. |
| 23 | M&L 25 mm thick PCC (1:2:4) type B1 using 20mm graded stone aggregate as in sub base to flooring complete all as specified and directed. |
| 24 | M&L 75 mm thick PCC 1:3:6, type C-1, using (20mm graded stone aggregate) as in plinth protection/hard standing, finished the surface even and smooth without using extra cement complete all as specified and as directed. |
| 25 | M&L hard core of gauge n. exc. 63mm deposited, spread and levelled in layers n.exc. 15cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed. |
| 26 | M&L 18mm thick Dark shade Granite stone slab (of approved type) work (table rubbed and polished) inplatforms and like over 15mm thick screed bed in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding off/curving the edges of granite stone & polishing complete all as specified and directed. |
| 27 | M&L Virified Ceramic tiles 8-10 mm thick (square/ rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry, pointed in white or coloured cement to match over & including 15mm thick screed bed in CM 1:4 complete all as specified & directed. |
| 28 | M/L Rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished even & smooth complete all as specified and directed. |
| 29 | M/L Rendering 10mm thick in CM 1:4 on fair faces ofconcrete surfaces, as on celing finished even & smooth complete all as specified and directed. |
| 30 | M/L for preparing plastered/ concrete surfaces using wall care putty to obtain the surface in true line & smooth and applying two coats of oil bound distemper over complete all as specified and directed. |
| 31 | All as per Srl item No. 29 above but as ceiling surfaces. |
| 32 | M/L for finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over priming coat of exterior primer applied @ 2.20 kg/10 sqm)® complete all as specified and directed. |
| 33 | M/L for returning, filling in,including spreading, leveling watering and well ramming in layers not exc 25cm in soil complete all as specified and directed. |
| 34 | M&L removing for excavated material (soil) to a distance n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed. |
| 35 | S&F powder coated aluminium Door using 63mm X 38mm X 1.6mm chowkhats with 45mm X 45mm X 1.6mm openable / sliding shutter including 4mm thick glass panes/Pre-laminated board of approved make with aluminium beading & rubber packing for fixing glass and including aluminium powder coated builder hardware aluminium handles 100mm - 02 Nos, tower bolts 100mm 02 Nos, hooks and eye - 02 Nos, 150mm long butt hinges 100mm- 04 Nos etc complete all as specified and as directed. (Make of glass- Modi float/ Atul/ Saint Gobain) Note:-The quoted rate shall deemed to be included for Aluminium door/ window / ventilators to be fixed with cadmium plated screw not more than 600 mm C to C & sealing the joints between frames & granite/kota stone with polysulphide sealant as per the manufactures instruction\". |
| 36 | S&F powder coated aluminium window using 63mm X 38mm X 1.6mm chowkhats with 45mm X 45mm X 1.6mm openable section as in shutter including 4mm thick glass panes of approved make with aluminium beading & rubber packing for fixing glass and including builder hardware such as aluminium handles 100mm - 02 Nos, tower bolts 100mm 02 Nos, hooks and eye - 02 Nos, 150mm, butt hinges 100mm 04 Nos etc complete all as specified and as directed. (Make of glass- Modi float/Atul) Note:-The quoted rate deemed to be included in unit rate quoted for aluminium door/ window / ventilators to be fixed with cadmium plated screw not less then 300 mm C to C & cealing the joints between frames & granite/kota stone with polysulphide sealant as per the manufactures instruction\". |
| 37 | M&L for use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed. |
| 38 | M&L for use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finisghed surfaces complete all as specified and directed. |
| 39 | S&F Factory moulded steel tubular trusses, purlins, rafter vertical post and similar works including special shaped washer etc. complete using ERW or induction butt weled tubes including cleats, plates, hold fast and includingconforming to IS 1161-1998 Gde st-240 complete all as specified and directed. |
| 40 | S&F mild steel hollow section purlins and similar works including special shaped washer etc. complete using ERW or induction butt weled tubes including cleats, plates, hold fast and includingconforming to IS 1161-1998 Gde st-240 complete all as specified and directed. |
| 41 | S&F for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 10 cm and n exc 15 cm long(Dia o f neck 11 to 15 mm) complete all as specified and directed. |
| 42 | S&F factory moulded pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed. |
| 43 | M&L for Ready mix Cold Bitumen (as per sample) for making surfaces good of distrubed portion of pavement complete all as specified and as directed. |
| 44 | M&L 75mm thick plain cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base for Paving tiles, paver block etc complete all as specified and directed. |
| 45 | M&L for 80 mm thick M-40 grade machine pressed precast concrete interlocking paver block any shape and size conforming to IS-15658-2006, with grey cement and pigment complete all as specified and directed. |
| 46 | M&L for removing excavated materialto a distance exc 250 mtr but not exc 500 mtr & depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed. |
| 47 | M&L RCC 1:2:4 (Nominal Mix) type B-1 using 20 mm graded crushed stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed. |
| 48 | Supplyfixing and testing electric operatedhorizontal storage type water heater (Geyser) 15 Ltr capacity 230 Volt, AC including nylon braided PVCconnection pipe with pipe fitting complete all as specified and directed. Make : Havells cat part Bianca Cat part No GHWCBNTWH015or equivalent to Bajaj |
| 49 | Supply & fixing Gate light luminarie LED type of 70 W with IP 65 protection with die cast aluminium graphite grey powder coated finished body , polycarbonate opal diffuser, low power warm white (WW) LEDs with better heat dissipation, high efficient constant current electronic driver having operating voltage range from 140 to 280 Volt AC, provided with high voltage, open and short circuit protection, Voltage surge protection 10 KV etc complete suitable for 60 mm OD pipe entry including suitable size loop in loop out boxes & flexible 3 core 1.5 Sqmm copper connecting cable from loop in loop out box to fitting etc complete all as directed & specified.Note: The rate inclusive of GI pipe, PCC etc complete.Make:BGCL 70 W LED WW of M/s BAJAJ or equivalent in CG /Philips / Havells. |
| 50 | Supply & lay or fixing or passing through pipe or in cable ducts, 1100 volts grade,XLPE, armoured, electric power cables (heavy duty) with aluminium conductorof the following size including dismantling old cables and taking out of the following sizes complete all as specified and directed:- |
| 51 | 16 Sqmm 4 Core |
| 52 | 10 Sqmm 4 Core |
| 53 | 50 Sqmm 3.5 Core |
| 54 | S&F 4 Pole plug in box 100 Amp with MCCB 35/50 KA for rising main/ Bus bar trunking to branch out connection complete all as specified and directed. |
| 55 | M&L for earthing complete with Galvanised Steel earth plate of size 60x60cmx6mm thick electrode and 32x6mm GI strip as earth lead, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below ground level, connected to 32x6mm earth strip by means of nuts, bolts, check nuts and washers of GI all as shown in electrical plate No.3 of SSR Part-I, connected to earth test terminal point all as specified or as indicated including testing on completion (Rates inclusive of necessary excavation in any type of soil, earth work, PCC pit, CI cover, funnel with watering pipe, suitable size of light grade GI Protection pipe for earth strip in ground etc. all as required at site for complete earthing). |
| 56 | M&L for earthing complete with Galvanised Steel earth plate of size 60x60cmx6 mm thick electrode and 4mm GI wire as earthing lead, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below ground level, connected to 4mm GI wire by means of nuts, bolts, check nuts and washers of GI all as shown in electrical plate No.3 of SSR Part-I, connected to earth test terminal point all as specified or as indicated including testing on completion (Rates inclusive of necessary excavation in any type of soil, earth work, PCC pit, CI cover, funnel with watering pipe, suitable size of light grade GI Protection pipe for earth strip in ground etc. all as required at site for complete earthing). |
| 57 | S&F in repair PVC (thermo plastic) water/weather proof street light junction box heavy duty suitable for 10-50 Sqmm cable with locking arrangement 3 phase aluminium bus bar incl 02 Nos PVC conduit upto the height of top most level of coping of pole from GL alongwith necessary MS clamp nut bolts and washers for fixing and 01 No MCB single pole 240 V 6-32 Amps complete all as specified and directed. |
| 58 | M&L for dismentling of existing steel poles of any description and removal from site, supplying erectionof steel tubular swaged poles in truely verticle position complete with cast iron base plate, finial taper plug, bolts,nuts & screws as specified type 410 SP-22(8.5 meters long)(factory painted internally) and applying two coats (externally) of synthetic enamel paint (of approved colour over all exposed steel surfaces complete all as specified and directed. Note: (a) All embeded steel surfaces shall be painted with two coats of Black bituminous paint over a coat of red oxide primer.(b) Coping shall be painted with two coat of synthetic enamel paint over a coat of primer.(c) Quoted rate shall deemed to be included above work, nothing extra shall be admissible. |
| 59 | Supply and fix or laid in road crossing/ fixed topoles, GI Pipe of 50 MM size light grade for protection of cable complete all as directed. |
| 60 | M&L for cutting trench through road/ wall to a width of 20cm and depth of 30cm for inserting GI protection pipe for drawing cable and filling back the trench with PCC 1:3:6 type C1 complete all as specified and directed. |
| 61 | Supply and fix LED street light 75/90 W IP 65 or equvilant all as specified and directed. |
| 62 | M&L for 23cm thick sand cushion for underground cable protection 8cm thick before laying cable and 15mm thick after cable in laid and streached complete all as specified and directed.Note: Punned thickness only will be measured and paid. |
| 63 | Supplying and laying un-reinforced ISI marked precast concrete cable cover, LV type flate size 250 X 150 X 40 mm complete all as specified and directed. |
| 64 | M&L for point wiring for Modular Switches complete with 1.5 Sqmm, single core, multistranded copper conductor PVC insulated FRLS cable 1100 Volts grade, drawn through PVC Conduit of suitable size including cutting in any type of wall and concealed conduit or casting in Lintel/slab etc with GI Subken boxes, top modular cover plate, Face plate etc as per site requirement and including 1.5 sqmm size multistranded FRLS PVC insulated copper earth continuity conductor to common earth dolly for one light/fan point controlled by one switch 5 Amps one way single pole complete all as specified and directed. |
| 65 | All as per item No. 60 above but three pin 5 Amps socket out let on same board board. |
| 66 | All as per item No. 60 here-in-before but point wiring with 2.5 Sqmm single core FRLS PVC insulated cables and earth continuity wire with 2.5 Sqmm single core cable for one 3 pin 15 Amps sockets outlet point on independent board. |
| 67 | S & F of Socket Modular type 6/16 A, 2 Module, 230 Volts. |
| 68 | S & F of Socket Modular type 6 A, 2 Module, 230 Volts. |
| 69 | S & F of Switch Modular type 6 A, 230 Volts one way single Module. |
| 70 | S & F of Switch Modular type 16 A, 230 Volts one way single Module. |
| 71 | M & L for Sub Main wiring with 2 x 2.5 Sqmm, single core, multistranded copper conductor FRLS PVC insulated cable 1100 Volts grade, including suitable size of PVC Casing Capping /conduit recessed in walls and clamped on surface at RCC portions etc including 1.5 Sqmm size FRLS PVC insulated Copper earth continuity conductor to common earth and connecting to earth dolly including drilling holes in any type of wall and make good to disturbed surfaces. |
| 72 | M & L for Sub Main wiring with 2 x 4 Sqmm, single core, multistranded copper conductor FRLS PVC insulated cable 1100 Volts grade, including suitable size of PVC Casing Capping /conduit recessed in walls and clamped on surface at RCC portions etc including 2.5 Sqmm size FRLS PVC insulated Copper earth continuity conductor to common earth and connecting to earth dolly for AC/Power point including drilling holes in any type of wall and make good to disturbed surfaces. |
| 73 | S & F of Ceiling fan complete with blades, Fan Regulator, \"S\" Shape hanging hook of suitable length and all other standard accessories, 230 volts, 1200 mm sweep complete all as specified and directed. |
| 74 | S&F of LED surface mounted batten for LED T-8 tubefitting 4 ft, suitable for 1x18w pre-wired and electric connections, polycarbonate housing and integrated electronic driver complete all as specified and directed. |
| 75 | S & F of Ceiling Fan down rod made up of MS of 2 Feet long including \"S\" type hook suitable for fixing of Ceiling fan complete all as specified and directed. |
| 76 | S & F of Ceiling Rose of PVC Polycarbonates body of round type, 3-terminals, 230 Volts complete all as specified and directed. |
| 77 | S&F of high power Flood Light, LED100W , die castaluminium, IP65suitablefor highlightingarchitectural features and general purposelighting with complete fixing arrangements on any type of wall / Pole etc complete all as specified and as directed. |
| 78 | S & F of Wall Mounted Fan complete with all standard accessories, 230 V, 400 mm sweep, copper winding and oscalating facility complete all as specified and directed. |
| 79 | S & F of SPN DB 8 Way, double door of CRCA Sheet with all other standard fixing accessories complete all as specified and directed. |
| 80 | S & F of MCB TPN, 415 Volts, 40 Amps Complete all as specified and directed. |
| 81 | S & F of MCB SP 240 Volts, 25 Amps Complete all as specified and directed. |
| 82 | Supply and Laying in trench or pass through road or clamping on any type of wall etc including testing & commissioning of25 Sqmm 3.5 Core LT UGXLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with multi-stranded Aluminium conductor including termination at both side of LT Panel/Feeder Pillar/Bus Bars/Change over panels etc with suitable size of AL Lugs, Nut-Bolts and washers, GI Saddles etc complete all as specified and directed. |
| 83 | S&F of 2.5 sqmm three core PVC round/flat sheathed flexible copper multistranded cable complete all as specified and as directed. |
| 84 | M&L for cutting of existing GI pipe including cutting, welding and inserting 50 mm GI nipple and all connected fittings all as specified and directed. |
| 85 | Removing surplus soil to a distance exceeding 1.5Km but not exc 5km beyond MoD land and depositing where directed at a level n.exc 1.5mabove the starting point complete all as specified and as directed. |
| 86 | Supplying, laying and jointing/connecting of GI water tubing, medium grade 50 mm dia with all necessary accessories specials viz socket, bend, tee, unions, cross, elbows, nipple short piece etc.jointing materials, cutting pipes, making threads with screwed and socketed joints and fixedcomplete in trenches, wall ceiling or laid in floor complete and making good the disturbed surfacecomplete all as specified and directed. |
| 87 | All as per serial item No 82.00 above but 80mm. |
| 88 | Supplying &fixing Gun Metal gate valves of size 50 mm dia with iron wheel head,screwed both ends for iron pipe, ISI Marked, as per IS: 778 complete all as specified and directed. |
| 89 | All as per serial item No 84.00 above but 80mm. |
| 90 | Supply and fix Valve, reflux/NRV, with by-pass Arrangement, 50 mm (2”) dia complete all as specified and directed. |
| 91 | Supply and fix Strainer Y type conforming to IS, size 50 mm (2”) dia complete all as specified and directed. |
| 92 | S&F cast Iron Air Valves with two air Outlets, 50 mm dia bore and fixing Up in cast iron water supply mains complete all as specified and directed. |
| 93 | All as per serial item No 88.00 above but 80mm (3\") dia. |
