|
| 1 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust andBrushing neat cement slurry with 3.0kg of cement per sq. metre etc complete all as spd & directed |
| 2 | M&L for brick work with sub class B Brick straightor curved on plan to any redius in half brick thick walls built in CM 1:4 Complete |
| 3 | M&L cutting openings, through brick walls for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, ncluding providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m |
| 4 | Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete |
| 5 | Taking down cement plaster/cement lime plasters of bk work on any description including racking out of joints and cleaning dust etc |
| 6 | M/L for rendering 15mm thick in CM 1:6 on other than fair faces of brick/conc surfaces face of wall, finished even & fair |
| 7 | M&L for preparation of New plastered surface of wall by complete removal & prepararion of surface and applying two coat of oil bond distemper incl preparation of surfaces with Birla putty over one coat primer etc all as specified and directed by Engr-in-Charge |
| 8 | M&L for preparation of New plastered surface of ceilingl by complete removal & prepararion of surface and applying two coat of oil bond distemper incl preparation of surfaces with 3mm wall care putty over one coat primer etc all as specified and directed by Engr-in-Charge |
| 9 | M&L for Preparing old plasteredsurfaces and applying two coats of distemper oil emulsion including on one coatwalls over a coat of wall putty to make surfaces smooth. |
| 10 | Dismantling floor, hearth or wall tiling including cement mortar bedding, removing unserviceable tiles |
| 11 | Taking down chowkhat with shutters (without taking off shutters from the frame)exc 1.50 sqm each but n. exc 4 sqm each. |
| 12 | Taking down chowkhat with shutters (without taking off shutters from the frame)n.exc 1.50 sqm each . |
| 13 | Supply & fixing of UPVC windows three track sliding window with two glazed and one wire mesh sliding shutters of profile width of frame 50 mm to 60 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile mpduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, anti lift device on slide windows with temper proof screws with and including glazed shutter fixed with 5 mm thick plain sheet glass & wire mesh shutter with stain less steel wire cloth 304 grade stainlesssteel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and filling gap of wall and frame with silicon sealent completeincl taking down old down old window complete all as specified. all as directed .Area Not Exc 2.00 Sqm. |
| 14 | S & F 5.5mm Sheet glass areaexc 0.5 sq. m in each pane |
| 15 | S&F venetian blinds ( rolling type) ofwide straps with all fittings ( to be matched with existing patterns) & taking down old venetian blinds complete all as specified and directed by Enginner- in- charge |
| 16 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets |
| 17 | S&FSolid PVC Wall Lining consisting of 5mm thickPVC sheet used but single side prelam instead of plain colour sheetPlain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing |
| 18 | S&F5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. |
| 19 | S&F for gypsum board 12mm thick in ceiling at different levels (Sunk & Raised) type of approved design fixed with screws as manufactures instructions including demolition of existing false ceiling complete all as specified and directed. |
| 20 | S&F Gl frame work for seamlessceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified |
| 21 | M&L for door closer hydraulicaly regulated designation No 3 universal type,suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed aluminium di cast. |
| 22 | M&LVitrified Ceramic light shade tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match flooring( in any pattern) andjointedwith coloured cement matching with surfaces of tiles as in floor 15 mm thickcement screed in CM 1:6 and pointed with coloured cement matching with surfaces of tiles as in floor complete all as specified and directed complete all as specified and directed |
| 23 | S&F in repair 12mm thick frame less toughfned safety glassFrameless glass pivot doors are completely customizable and are the perfect entryway option for many situations. The two-way pivoting doors can fit with almost every system options in both locking and standard. with total Toughned /frosted glass clamping with CP bracketswith supporting rods from eachheight 2100mm and 700 to 1200mm mm door opening out side view, left hand out side open completeas specified and directed. |
| 24 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 incl dismantling old mild steel work of any description complete all as specified. |
| 25 | M&L forproividingtwo coaat of synthetic enamel paint over one coat of red oxide primer Surfaces of any description, over 10cm in width or girth,not otherwise described |
| 26 | M&L for Brick work with Fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 |
| 27 | M&L for rendering 10mm thick in CM 1:3 on other than fair faces of brick/conc surfaces face of ceiling, finished even & fair |
| 28 | M&L for filling backhild fastwith PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate complete all as specified. |
| 29 | M&L for 25mm Granite (of any type) work(table rubbed and polished)in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cementmortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to matchwith shade of granite. |
| 30 | M&L for ProvidingType B1 1:2:4 ,20 mm graded cemment concrete in roof kerbs or mud stops, rounded or chamfered on edges inlintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided or in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed |
| 31 | M&L for Mild TMTsteel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and includingmild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 32 | M&L for Mild TMT steel bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and includingmild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 33 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50m in ordinary rock. |
| 34 | Removing excavated soil to a distance n.exceeding 50mand depositing where directed at level n.exc 1.5m above starting pontcomplete all as specified and directed |
| 35 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 36 | P&L 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 37 | Hardcore of gauge exc 63 mm but n exc.100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface |
| 38 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.75 mm thick with 20 mm nominal size stone aggregate |
| 39 | Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 40 | M/L for rendering 15mm thick in CM 1:4 on other than fair faces of brick/conc surfaces finished even and smooth without using extra cement al as specified and directed by Engineer In charge. |
| 41 | Distempering with 1st quality acrylic distemper (ready mixed) Two or more coats on new workhavingVOC content less than 50 gms/litre, of approved manufacturer of required shade and colour complete, as per manufacturer\"s specification. |
| 42 | Distempering with 1st quality acrylic distemper (ready mixed) Two or more coats on old workhavingVOC content less than 50 gms/litre, of approved manufacturer, ofrequired shade and colour complete, as per manufacturer\"s specification. |
| 43 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. |
| 44 | Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. With granite stone of area less than 0.50 sqm.complete as per direction of Engineer-in-Charge. |
| 45 | Providing Granite edge moulding to 18 mm thick marble stone counters, Vanities etc, including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. |
| 46 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 47 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 48 | Providing & fixing at all heights, levels and locations colour finish Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/tapping Stainless steel screws M6, 50 mm long with 3 mm EPDM seal washer etc. all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In-Charge. (Cost of truss/frame work shall be paid separately). 12.65.1 0.56 mm, Aluminium Color coated troughed profile with center to center pitch of 200 mm, depth of 32 mm, overall profile width 1092mm, cover width 1000mm. sqm |
| 49 | Providing and placing PVC tripple layer water tank on terrace (at all floor levels) , IS:12701 marked, with cover, tank connector and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes including fittings and fixtures complete all as specified and directed. |
| 50 | Providing and fixing 12.5 mm thick tapered edge Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3):1996 (Boards with BIS certification marks) false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer\"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting . |
| 51 | Providing and fixing 18-25mm thick Kota stone slab flooring over 20 mm (average) thick base laid over andjointed with grey cement slurry mixed with pigment to match the shadeof the slab, including rubbing and polishing complete with base of cementmortar 1 : 4 (1 cement : 4 coarse sand) complete all as specified. |
| 52 | Demolition unreinforced cement concrete of any description and in any position not otherwise specifically provided for |
| 53 | Demolition of brick work or stone masonary built in cement mortar or lime mortar including all quoins arches, pillars etc complete all as spd & directed |
| 54 | M&L for preparation of New plastered surface of wall by complete removal & prepararion of surface and applying two coat of oil bond distemper all as specified and directed by Engr-in-Charge |
| 55 | M&L for Preparing old plasteredsurfaces and applying two coats of distemper oil emulsion including on one coatwallsto make surfaces smooth. |
| 56 | M&L for preparation of New plastered surface of ceilingl by complete removal & prepararion of surface and applying two coat of white washall as specified and directed by Engr-in-Charge |
| 57 | M&L for preparation of old ceiling surfaceby complete removal & prepararion of surface and applying two coat white washall as specified and directed by Engr-in-Charge |
| 58 | M&L for Preparing old plasteredsurfaces and applying two coats of cement base paintone coat of alkali resistan paint. |
| 59 | M&L for Preparing newplasteredsurfaces and applying two coats of cement base paintone coat of alkali resistan paintwalls . |
| 60 | S&F for gear operated Steel rolling shutters thickness of sheet 1.00 mm with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull gear operated type with bevel gear box and crank handle complete all as specified. |
| 61 | S&F for Safety lever locks mild steel with 4 levers for rolling shutters lockable from both inside and outside complete all as specified. |
| 62 | M&L for Aplying two coats of aluminium paint over a coat of aluminium red oxide incl preparation on new/ old steel surfaces all as specified and directed |
| 63 | M&L for 50mm thick cement concrete type B-2, 1:2:4 (20mm graded aggregate) complete all as specified and directed. |
| 64 | Demolition for cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) |
| 65 | DemolitionStone slabs and tiles of any description or thickness in floors, aprons etc. |
| 66 | Excavation in trences not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep for foundation etc and getting out in Hard/Dense soil. |
| 67 | S&F 200mm dia Salt-glazed stoneware drain pipes laid in trenches and jointed as specified |
| 68 | M&L for PCC (1:4:8) type D2 in foundation filling and mass concrete(40mm graded aggregate)all as specified and directed by Engineer in charge. |
| 69 | M & L for plain cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in coping, benching etc including necessary form work complete all as directed. |
| 70 | Extra for forming fair finished drain or channel 45 cm inner girth in cement concrete using extra cement including forms moulds, mitered/stopped ends etcall as specified and directed by Engineer in charge. |
| 71 | Removal of excavated material to a distanceexceeding500 mtrand not exceeding 1.5 km deposited where directed at level not exceeding 1.50 Mtr above the starting pointall as specified and directed by Engineer in charge. |
| 72 | Returning fillng in, including spreding, levelin, watering and well rammingin layers not exc 25cmall as specified and directed by Engineer in charge. |
| 73 | M & L for pre-cast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate) as in cover slabs including necessary from work etc,and placement of cover where requiredall as specified and directed by Engineer in charge. |
| 74 | Material and labour for coloured chequered cement concrete tiles 30mm thick,of any shape and size not less than .09 sqm in each tiles, set and jointed , pointed in neat cement slurry in floors with grey cement and pigment over 15mm thick screedin cement mortar(1:6)all as specified and directed by Engineer in charge. |
| 75 | Taking down old unserviceable point wiring (Light, Fan, bell, Socket or power) complete including fixture and fittings such as switches, ceiling roses, regulators, sockets, light fittings etc andmaking good to the disturbed surfaces of walls, ceilings and floor match the existing shade complete all as specified and directed. |
| 76 | Material and labour for point wiring complete with 1.5 Sqmm single core PVC insulated FRLS unsheathed cable voltage up to and including 1100 volts grade multi-stranded copper conductor drawn through and including rigid PVCconduit medium grade 20mm or higher dia ISI marked as required at siteincluding conduit accessories such as junction boxes, inspection covers etc, surface/concealed on brick masonry walls, roofs, floors etc by means of saddles and clips etc including cutting chasing and making good of disturbed surfaces to match existing surface where required and concealed galvanised box factory made of suitable sizeincluding modular plate as per number of switch modules required for fixing switches, sockets fan regulators etc of required size including provision of PVC insulated 1.5 Sqmm FRLS copper conductor cable as earth continuity conductor and connecting to common earth dolly all as specified and directed for the following:-One light/ fan point/exhaust point controlled by one, one way switch/bell push |
| 77 | All as per item No. 2above but for 5 Amps socket on independent board |
| 78 | All as per item No. 2 above but for 5 Amps socket on same board |
| 79 | All as per item No. 2 above but wiring with 4.0 Sqmm for 15 Amps switch socket combination on independent boardincluding providing 4.0 Sqmm PVC insulated FRLS unsheathedcopper conductor cable as earth continuity conductor and connected to common earth dolly. |
| 80 | Supply and Fixing Modular switch single pole, one way 6 Amps one module all as specified and directed. |
| 81 | Supply and Fixing Modular switch single pole, one way 16 Amps one module all as specified and directed. |
| 82 | Supply and Fixing Modular socket6 Amps multipurpose 2 in 1- 2/3 pin 2 module complete all as specified and directed. |
| 83 | Supply and Fixing Modular socket 6/16 Amps multipurpose 2 in 1 -2/3 5 pin 2 module complete all as specified and directed. |
| 84 | Supply and Fixing ceiling rose three terminals Poly carbonated isolated body complete all as specified anddirected. |
| 85 | Supply & fix Industrial type recessed mounted energy efficient LED luminaire 36 W (2 x 2), 6500K CCT, electronic driver, with < 10% THD, lumens efficiency not less than 120lm/watt metric false ceiling type Armstrong/us gypsum complete with all accessories prewired and including connecting up with three core twister flexible copper conductorcable with suitable size complete removing unserviceable fittings all specified and directed. |
| 86 | Supply and fix Industrial type LED luminaire 1x20W, aluminium housing with polycarbonate diffuser, with , 10% THD, lumen efficiency not less that 120 lm/watt complete with all accessories prewired and includingconnectingup with three core twister flexible copper conductorcablewith suitable size complete removingunserviceable fittings all as specified and directed. |
| 87 | Supply and Fix MCB Distribution board, SPN 12 way sheet metal enclosure double door 415 volts, AC, factory made, fixed on wall suitable for mounting Isolators andMCBs with bus bars, neutral link and earth bar of following No. of ways including taking down unserviceable distribution board and making good to the disturbed surfaces of wall all as directed. |
| 88 | Supplying and fixing 63 Amp rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 89 | Supplying and FixingMCB SP 6 to 32 Amps, 240 Volts 10 KA \"C\" series complete all as specified and directed. |
| 90 | Supply & Fixing Modular step type, electronic fan regulator, two module, 240 Volts, complete all as specified and directed. |
| 91 | Supply & Fixing modular socket one way 6 Amps, 2/3 pin combination 2 module, complete all as specified and directed. |
| 92 | Supply & Fixing modular socket, 6A/16A - 2 /3 pin combination 2 module, complete all as specified and directed. |
| 93 | S&F ceiling rose two to three terminal surface backallite type AC 50Hz 230 volts complete |
| 94 | S&F 1x20W,230V, 6500K CCT surfacemounted integral LED batten with extruded aluminium housing with inbuilt electronic driver, polycarbonate diffuser including connecting up with twin core twisted flexible copper condctor cable from ceiling rose to fitting all as specified.Make : Havells cat part No. ENDURALINEARNEOBS20WLED865SPCSS or equivalent in Philips/Wipro |
| 95 | Supply and fixing 240V, 10 KA \"c\" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning. |
| 96 | Supply and fixing factory made epoxy powder coated Distribution Board SPN 04 way double door ( MCB DB ) MCB DP as In comer, with 200 Amp bus bar, metal door (IP-43 protection, IK-09)as per IES-61439-3 fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting andneutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with Knockout semi flush to wall and making good disturbed surface and touch up with the same finishescompletecomplete all as specified Note: MCBs will be measured and paid seperately under respective Sch A item in the schedule |
| 97 | M&L sub main wiring with PVC insulated FRLS grade cable LT 1100 Volts grade PVC insulated unsheathed, multistranded with stranded copper conductor drawn in & including concealed type medium grade PVC conduit not less than 20mm ISI marked with all accessoriesand incl cuttting and chasing of any type of wall and making good to match with the existing surfaces alongwith one contineous earth wire and connected to common earth complete all as specified for following sizes of cable 2 x 2.5 sq mm with one continous earth wire of size 2.5 sq mmNote : 2 runs of 2.5 sq mm cable and one run of 2.5 sq mm earth wire and PVC conduit will be measured as one meter. |
| 98 | Supply and fixing amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of 2 pole and 63 ampscurrent carrying capacity in the MCB DB complete with connection testing and commissioning. |
| 99 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as directed. |
| 100 | Supply and fixing factory made epoxy powder coated Distribution Board SPN 04 way double door (MCB DB) MCB DP as In comer, with 200 Amp bus bar, metal door (IP-43 protection, IK-09)as per IES-61439-3 fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting andneutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with Knockout semi flush to wall and making good disturbed surface and touch up with the same finishescompletecomplete all as specified Note: MCBs will be measured and paid seperately under respective Sch A item in the schedule |
| 101 | Supply & Fix sub main wiring with 2 run of 4 Sqmm single core FRLSPVC insulated unsheathed cable 1100 Volts grade multistranded with copper conductor (FRLS) drawn through and including non metallic rigid PVC conduit 25 mm dia including conduit accessories surface/concealed type on walls, roof,floors etc including one run of 4 Sqmm PVC copper conductor as earth continuity wireall as specified and directed. |
| 102 | M&L for Earthingwith GI plate electrode 600x 600x 6 mm thick buried directly in ground vertically to a depthnot less than 2.25 mtr deep below normal ground level with top edge of earth plate, not less than 1.5 mtr below normal ground level connected to GI wire of size 4 mm by means of bolts, nuts/check nuts and washers etc of galvanised iron, protected by 15 mm dia galvanised iron pipe, light gradeupto a length of 7.5 mtr away from earth electrode and connected to main switch/control board including necessary excavation earth work in any type of soil and PCC 1:3:6 type C1 for earth chamber, 40mm thick RCC cover slab 1:2:4 type B1 with 8 mm dia TMT Bars at 140 mmc/c both ways,GI funnel, wire mesh, lugs, charcoal and salt etc complete all as shown in Electrical plate No. 3of SSR Part I and testing complete including removing unserviceableearthing material completeall asdirected. |
| 103 | GI earth wire of6 mm dia fixed on walls/flooras earth continuity conductor connected to DBs/ panels etc. |
| 104 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 sq mm 4 core |
| 105 | Supply & Fix sub main wiring with 2 run of 6 Sqmm single core FRLS PVC insulated unsheathed cable 1100 Volts grade multistranded with copper conductor (FRLS) drawn through and including non metallic rigid PVC conduit 25 mm dia including conduit accessories surface/concealed type on walls, roof,floors etc including one run of 6 Sqmm PVC copper conductor as earth continuity wire all as specified and directed. |
| 106 | Supply & fix ceiling fans complete with electronic type regulator and accessories 230 V,1200 mm sweep. BEE 5 star rated |
| 107 | Supply and fixing RJ 45 jack with gang box and outer platefor LAN connectioncomplete all as specified and directed. |
| 108 | Supplying and fixing telephone socket outlet modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 109 | Supplying and fixing of size 25 mm of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.complete all as specified anddirected. |
| 110 | Supplying and drawing of UTP 4 pair CAT 6 LAN 2 run of Cable in the surface/ recessed Steel/ PVC conduit as required. |
| 111 | Supplying and drawing 4 pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 112 | Supply and fix industrial type sheet metal enclosures single pole and neutral with a two pin and earth metal clad plug and socket complete 20 Amphs, 240 volts complete with all accessories etc all as directed |
