|
| 1 | Charpoy GI Pipe with nylon newar MNF (FD-220) |
| 2 | Replacement of old unserviceable/ broken/ damaged existing nylon newar from the top of GI Charpoy with new nylon newar, white/ light colour, non-recycled, superior quality, 50mm/ 55mm width, weight not less than 1.50 Kg to 1.70 Kg in each charpoy, complete all asspecified and shown in the drawings. |
| 3 | Replacement of old unserviceable/ broken/ damaged existing three way elbows GI from charpoy GI pipe with new three way elbows GI, 32mm bore, medium grade, (ISI marked) wherever required, complete all as specified and shown in the drawings. |
| 4 | Replacement of old unserviceable/ broken/ damaged existingGI hexagonal check nut from GI Charpoy pipe with new hexagonal check nuts, 32mm bore, 6mm thick, complete all as specified and shown in the drawings. |
| 5 | Replacement of old unserviceable/ broken/ damaged existing long rails with new long rails for GI Charpoy, 32 mm bore GI pipe, medium grade, ISI marked, length as shown in drawings, complete all as specified andshown in the drawings. |
| 6 | Taking out old unserviceable/ broken/ damaged existing short rails & providing / fixing / tigthening the short rail by cutting out of old unserviceable/ broken/ damaged existing long rails retrieved from charpoy GI Pipe under serial item No 1.4 above and converting / making the same into short rail incl.threading the and fixing/ tightening in the existing charpoyscomplete all asspecified and shown in the drawings. |
| 7 | Taking out old unserviceable/ broken/ damaged existing /legs& providing / fixing / tigthening the legs by cutting out of old unserviceable/ broken/ damaged existing long / short rails retrieved from charpoy GI Pipe under serial item No 1.4 & 1.5 above and converting / making the same into legs incl.threading the and fixing/ tightening in the existing charpoyscomplete all asspecified and shown in the drawings. |
| 8 | Tightening the frame complete before retaping/ weaving of newar to charpoys GI, complete all as specified and as directed. |
| 9 | Table dinning ORs Aluminum Top (FD-165) |
| 10 | Replacement of old unserviceable/ broken/ damaged oldtop of table dinning ORs with new top made of 18/19mm thick particle board commercial duly covered with 0.80mm thick aluminum sheet including other required materials, complete all as specified and shown on drawing. |
| 11 | Replacement of old unserviceable/ broken/ damaged components i.e. legs, top long rails, top short rails, top stiffener and bottom stiffener with new components i.e. legs, top long rails, top short rails, top stiffener and bottom stiffener, made out of 25mm square mild steel pipe, 1.6mm thick, complete all as specified and shown on drawing. |
| 12 | Welding at joints of 25mm Square mild steel pipe, 1.6mm thick where ever required to repair the table dining ORs, complete all as specified and shown on drawing. |
| 13 | Replacement of unserviceable/ broken/ damaged rubber shoes from legs of Table dining ORs with new rubber shoes of best quality matching with the existing shoes, complete all as specified and as directed. |
| 14 | Preparation of the existing, decorated/ undecorated surfaces of Table dining ORs and spray painting with two coats of synthetic enamel black paint of approved quality, complete all as specified and directed. |
| 15 | Almirah Medium steel with shelves (FD-242 and FD-1032) |
| 16 | Replacement of old existing broken/ unserviceable locks of any description and in anyposition with new locks with double keys, fixing with suitable screws/ nuts including repair of locking device, complete all as specified and shown in the drawings. |
| 17 | Replacement of old existing broken/ unserviceable door handles of Almirah, size 100 mm long, mild steelchromium plated of approved make, ISI marked, best quality, complete with nuts and pins, complete all as specified and shown in the drawings. |
| 18 | Replacement of old unserviceable/ broken/ damaged existinghooks from almirah with new hook of best quality, fixed in vertical channel below of each shelves at equal space, complete all as specified and shown in the drawings. |
| 19 | Replacement of old unserviceable/ broken/ damaged shelves with new shelves made out of 1.0mm plain black sheet, complete all as specified and shown on drawing. |
| 20 | Replacement of old unserviceable/ broken/ damaged legs with new legs made out of 1.0mmplain black sheet, complete all as specified and shown on drawing including welding of legs. |
| 21 | Replacement of old unserviceable/ broken/ damaged hinges from shutters with new hinges, complete all as specified and as directed. |
| 22 | Replacement of old existing broken/ unserviceable locking devices of any description and in anyposition with new locking devices, three ways, fixing with suitable screws/ nuts complete all as specified and shown in the drawings. |
| 23 | Preparation of the existing decorated surfaces of the steel Almirah with shelves by removing of all dents and filling with putty and spray painting with two coats of synthetic enamel OG paint of approved quality on internal and external surface, complete all as specified and directed. |
| 24 | Chair CB Steel with arms [FD-75(M)] |
| 25 | Replacement of old unserviceable/ broken/ damaged existing seats with new seats of sheesham wood, 1st class hard wood duly canned with cane, plastic, 2mm thick of 1st quality in godrej pattern including painting to wooden portion with two coats of synthetic enamel black paint, complete all as specified and shown on drawing. |
| 26 | Replacement of old unserviceable/ broken/ damaged existing back with new back of sheesham wood, 1st class hard wood duly canned with cane, plastic, 2mm thick of 1st quality in godrej pattern including painting to wooden portion with two coats of synthetic enamel black paint, complete all as specified and shown on drawing. |
| 27 | Replacement of old unserviceable/ broken/ damaged existing arms with new back of sheesham wood, 1st class hard wood including painting to wooden portion with two coats of synthetic enamel black paint, complete all as specified and shown on drawing. |
| 28 | Replacement of old unserviceable/ broken/ damaged existingPVCshoe / caps of best quality complete all as specified and shown on drawing. |
| 29 | Providing new mild steel flat iron 30x3m as stiffener under the seat, duly welded both ends to frame, complete all as specified and shown on drawing. |
| 30 | Preparation of the existing, old decorated surfaces of the chair CB steel with arms including weldingat joints as required and spray painting with two coats of synthetic enamel OG paint of approved quality, complete all as specified and directed. |
| 31 | Chair CB Steel without arms [FD-75(M) |
| 32 | Replacement of old unserviceable/ broken/ damaged existing seats with new seats of sheesham wood, 1st class hard wood duly canned with cane, plastic, 2mm thick of 1st quality in godrej pattern including painting to wooden portion with two coats of synthetic enamel black paint, complete all as specified and shown on drawing. |
| 33 | Replacement of old unserviceable/ broken/ damaged existing back with new back of sheesham wood, 1st class hard wood duly canned with cane, plastic, 2mm thick of 1st quality in godrej pattern including painting to wooden portion with two coats of synthetic enamel black paint, complete all as specified and shown on drawing. |
| 34 | Replacement of old unserviceable/ broken/ damaged existingPVC shoes / caps of best quality complete all as specified and shown on drawing. |
| 35 | Propviding new mild steel flat iron 30x3m as stiffener under the seat, duly welded both ends to frame, complete all as specified and shown on drawing. |
| 36 | Preparation of the existing, old decorated surfaces of the chair CB steel without arms including weldingat joints as required and spray painting with two coats of synthetic enamel OG paint of approved quality, complete all as specified and directed. |
| 37 | Almirah Large steel (FD-67 and FD-1031) |
| 38 | Replacement of old existing broken/ unserviceable locks of any description and in anyposition with new locks with double keys, fixing with suitable screws/ nuts including repair of locking device, complete all as specified and shown in the drawings. |
| 39 | Replacement of old existing broken/ unserviceable door handles of Almirah, size 100 mm long, mild steelchromium plated of approved make, ISI marked, best quality, complete with nuts and pins, complete all as specified and shown in drawing. |
| 40 | Replacement of old unserviceable/ broken/ damaged existing hooks from almirah with new hook of best quality, fixed in vertical channel below of each shelves at equal space, complete all as specified and directed. |
| 41 | Replacement of old unserviceable/ broken/ damaged shelves with new shelves made out of 1.0mm plain black sheet, complete all as specified and shown on drawing. |
| 42 | Replacement of old unserviceable/ broken/ damaged legs with new legs made out of 1.6mm plain black sheet, including welding of legs, complete all as specified and shown on drawing |
| 43 | Replacement of old unserviceable/ broken/ damaged hinges from shutters with new hinges, complete all as specified and shown in the drawings. |
| 44 | Replacement of old existing broken/ unserviceable locking devices of any description and in anyposition with new locking devices, three ways, fixing with suitable screws/ nuts complete all as specified and shown in the drawings. |
| 45 | Preparation of the existing decorated surfaces of the steel Almirah with shelves by removing of all dents and filling with putty and spray painting with two coats of synthetic enamel OG paint of approved quality on internal and external surface, complete all as specified and directed. |
| 46 | Locker bed side steel ( FD-27, FD-267 and FD-1029) |
| 47 | Replacement of old un-serviceable/ broken/ damaged existing door handles of steel locker 100 mm long with new mild steelchromium plated of approved make, with screws/ nuts and pins, complete all as specified and shown on drawing. |
| 48 | Replacement of old unserviceable/ broken/ damaged existing hasp and staple of any description and in anyposition with new hasps and staple chromium plated 100 mm longfixing with suitable screws/ nuts including repair of locking device, complete all as specified and shown on drawing. |
| 49 | Replacement of old unserviceable/ broken/ damaged shelves with new shelves made out of 1.0mm mild steel plain blacksheet, complete all as specified and shown on drawing. |
| 50 | Replacement of old unserviceable/ broken/ damaged legs with new legs made out of 1.0mm mild steel plain blacksheet, including welding of legs, complete all as specified and shown on drawing. |
| 51 | Replacement of old unserviceable/ broken/ damaged bottom sheet with new bottom sheet, 1.0mm mild steel plain blacksheet, including welding, complete all as specified and shown on drawing. |
| 52 | Preparation of the existing, decorated surfaces of the locker bed side steel by removing of all dents and filling with putty and spray painting with two coats of synthetic enamel OG paint of approved quality on internal and external surface, complete all as specified and directed. |
| 53 | Table office Officer steel (FD-84 and 306) |
| 54 | Replacement of unserviceable/ broken/ damaged old top of table office officer steel with new top made of pre-laminated particle board, one side teak faced exterior and one side balancing white, grade BWR, 18mm thick including PVC beading all around the top, complete all as specified and shown in drawing and as directed. |
| 55 | Replacement of unserviceable/ broken/ damaged old drawer of Table office officer steel with new drawer made out of 1.0mm plane mild steel plain blacksheet, complete all as specified and shown on drawing. |
| 56 | Adjustment to existing drawer for easy functioning including denting/ welding and repairing to bottom channel for drawer, complete all as specified and as directed. |
| 57 | Replacement of old unserviceable/ broken/ damaged legs, top long rails, top short rails, top stiffener and bottom stiffener with new legs, top long rails, top short rails, top stiffener and bottom stiffener, made out of 25mm square mild steel pipe, 1.6mm thick including cutting and welding, complete all as specified and shown on drawing. |
| 58 | Replacement of unserviceable/ broken/ damaged rubber shoes from legs of Table office officer steel with new rubber shoes of best quality matching with the existing shoes, complete all as specified and as directed. |
| 59 | Preparation of the existing, decorated/ undecorated surfaces of Table office officer steel and spray painting with two coats of synthetic enamel OG paint of approved quality, complete all as specified and directed. |
| 60 | Table office clerk steel (FD-84 and 1004) |
| 61 | Replacement of unserviceable/ broken/ damaged old top of table office clerk steel with new top made of pre-laminated particle board, one side teak faced exterior and one side balancing white, grade BWR, 18mm thick including PVC beading all around the top, complete all as specified and shown in drawing. |
| 62 | Replacement of unserviceable/ broken/ damaged old drawer of Table office clerk steel with new drawer made out of 1.0mm plane galvanised iron sheet, complete all as specified and shown on drawing. |
| 63 | Adjustment to existing drawer for easy functioning including denting/ welding and repairing to bottom channel for drawer, complete all as specified and as directed. |
| 64 | Replacement of old unserviceable/ broken/ damaged legs, top long rails, top short rails, top stiffener and bottom stiffener with new legs, top long rails, top short rails, top stiffener and bottom stiffener, made out of 25mm Square mild steel pipe, 1.6mm thick including cutting and welding, complete all as specified and shown on drawing. |
| 65 | Replacement of unserviceable/ broken/ damaged rubber shoes from legs of Table office clerk steel with new rubber shoes of best quality matching with the existing shoes, complete all as specified and as directed. |
| 66 | Preparation of the existing, decorated/ undecorated surfaces of Table office clerk steel and spray painting with two coats of synthetic enamel OG paint of approved quality, complete all as specified and directed. |
| 67 | Table Computer |
| 68 | Replacement of unserviceable/ broken/ damaged old top with new top made of pre limenated board 18mm with bedding patty, complete all as specified. |
| 69 | Replacement of old unserviceable/ broken/ damaged old drawer including chennel from partical board with new drawer including chennel from partical board, complete all as specified and shown on drawing. |
| 70 | Replacement of old unserviceable/ broken/ damaged old keyboard holderboard from partical board with new keyboard holder board from partical board, complete specified and shown on drawing. |
| 71 | Preparation of old base frame with new base frame made by MS Tube 25mm x 25mm sqare pipe welded painting and complete as specified. |
| 72 | Chair Revolving |
| 73 | Replacement of unserviceable/ broken/ damaged old seat with back made with foam cousionwith seat with back made with foam cousion with regzine first class,size 32mm, complete all as specified and shown in drawing. |
| 74 | Replacement of unserviceable/ broken/ damaged old arms left and rightwithnew arms left and right made of cost iron, complete all as specified and shown in drawing. |
| 75 | Replacement of old unserviceable/ broken/ damaged base and wheel, with new base and wheel including welding, complete all as specified and shown on drawing. |
| 76 | Replacement of old unserviceable/ broken/ damaged adjustment liver road with new adjust liver road including welding, complete all as specified and shown on drawing. |
| 77 | Table steel 900x900x760mm (FD-1009) |
| 78 | Replacement of unserviceable/ broken/ damaged old top of table steel with new top made of pre-laminated particle board, one side teak faced exterior and one side balancing white, grade BWR, 18/19 mm thick including PVC beading all around the top, complete all as specified and shown in drawing. |
| 79 | Replacement of old unserviceable/ broken/ damaged legs, top long rails, top short rails, top stiffener and bottom stiffener with new legs, top long rails, top short rails, top stiffener and bottom stiffener, made out of 25mm Square mild steel pipe, 1.6mm thick including cutting and welding, complete all as specified and shown on drawing. |
| 80 | Replacement of unserviceable/ broken/ damaged rubber shoes with new rubber shoes of best quality matching with the existing shoes, complete all as specified and shown in drawing. |
| 81 | Preparation of the existing, decorated/ undecorated surfaces of Table steel and spray painting with two coats of synthetic enamel OG paint of approved quality, complete all as specified and directed. |
| 82 | Table steel 900x600mm without drawer (FD-1007) |
| 83 | Replacement of unserviceable/ broken/ damaged old top with new top made of pre-laminated particle board, one side teak faced exterior and one side balancing white, grade BWR, 18mm thick including PVC beading all around the top, complete all as specified and shown in drawing. |
| 84 | Replacement of old unserviceable/ broken/ damaged legs, top long rails, top short rails, top stiffener and bottom stiffener with new legs, top long rails, top short rails, top stiffener and bottom stiffener, made out of 25mm square mild steel pipe, 1.6mm thick including cutting and welding, complete all as specified and shown on drawing. |
| 85 | Replacement of unserviceable/ broken/ damaged rubber shoes with new rubber shoes of best quality matching with the existing shoes, complete all as specified and shown in the drawing. |
| 86 | Preparation of the existing, decorated/ undecorated surfaces of table steel and spray painting with two coats of synthetic enamel OG paint of approved quality, complete all as specified and directed. |
| 87 | Table steel 900x600mm with drawer (FD-1008) |
| 88 | Replacement of unserviceable/ broken/ damaged old top of table steel with new top made of pre-laminated particle board, one side teak faced exterior and one side balancing white, grade BWR, 18/19 mm thick including PVC beading all around the top, complete all as specified and shown in drawing. |
| 89 | Replacement of old unserviceable/ broken/ damaged legs, top long rails, top short rails, top stiffener and bottom stiffener with new legs, top long rails, top short rails, top stiffener and bottom stiffener, made out of 25mm square mild steel pipe, 1.6mm thick including cutting and welding, complete all as specified and shown on drawing. |
| 90 | Replacement of unserviceable/ broken/ damaged rubber shoes with new rubber shoes of best quality matching with the existing shoes, complete all as specified and shown in drawing. |
| 91 | Replacement of unserviceable/ broken/ damaged rubber locks with new locks from the locking assembly, double keys, fixing with suitable screws/ nuts including repair of locking device, complete all as specified and shown in drawing. |
| 92 | Preparation of the existing, decorated/ undecorated surfaces of table steel and spray painting with two coats of synthetic enamel OG paint of approved quality, complete all as specified and directed. |
| 93 | Bed Hard MAP |
| 94 | Dismantling of old and US plywood top of bed and S&F new plywood grade BWR,12mm thick (ISI marked)with screws. Note: Contractor has to produce purchase voucher directly from company, (Bar code required) |
| 95 | Taking out old unserviceable plywood of head board and S&F new prelaminated particle board exterior grade as per drg. Complete all as specified and directed |
| 96 | Taking out old unserviceable plywood of foot board and S&F new prelaminated particle board exterior grade as per drg. Complete all as specified and directed |
| 97 | Teapoy verandah steel (FD-383) |
| 98 | Replacement of unserviceable/ broken/ damaged old top with new top made of pre-laminated particle board, one side teak faced exterior and one side balancing white, grade BWR, 18mm thick including PVC beading all around the top, complete all as specified and shown in drawing. |
| 99 | Replacement of old unserviceable/ broken/ damaged legs, top long rails, top short rails, top stiffener and bottom stiffener with new legs, top long rails, top short rails, top stiffener and bottom stiffener, made out of 25mm Square mild steel pipe, 1.6mm thick including cutting and welding, complete all as specified and shown on drawing. |
| 100 | Replacement of unserviceable/ broken/ damaged rubber shoes with new rubber shoes of best quality matching with the existing shoes, complete all as specified and shown in drawing. |
| 101 | Preparation of the existing, decorated/ undecorated surfaces of table steel and spray painting with two coats of synthetic enamel OG paint of approved quality, complete all as specified and directed. |
| 102 | Note:- The contract sum shall be arrived at after deduction of amount of Sch of credit. |
