Tender For Day To Day Maint/Comprehenshiv Repair In Karnail Vihar, Jagdish Vihar, Kansraj Vihar & Somnath Line Under Ge(West)Pathankot; 1 S&F GI tube 15 mm diamedium grade galvanised with all fittings laid in floors /wall etc. complete all as specified and as directed. Including taking down complete all as specified 2 Refixingold steel tubing and connections 15mm bore in newor old position (wall, ceiling , floors) etc complete all as specified and as directedIncluding taking down complete all as specified 3 S&F GI tube 20 mm dia medium grade galvanised with all fittings laid in floors /wall etc. complete all as specified and as directed.including taking down complete all as specified 4 Refixingold steel tubing and connections 20mm bore in newor old position (wall, ceiling , floors) etc complete all as specified and as directedIncluding taking down complete all as specified 5 S&F in repair Sintex water tank cover (Dhakkan) tied with locking arrangements for 500and1000 Ltrcapacitywater storage tank. 6 S&F in repair 15mm dia Pillar taps,cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed 7 S & F in repair 15mm dia Stop valves, cast copper alloy chromium plated fancy type , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed 8 S & F in repair 15mm dia Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms). 9 S & F in repair15mm dia Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms 10 S & F in repair 15mm dia Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm-92gms) 11 S & F in repair 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. make Prayag or eqvl. 12 S & F in repair Grating doom 100mm dia of PTMT (Minimum weight 25gms) fixed with cement. 13 S & Fin repair Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) 14 S & F in repairPVC connections 15mm size with PTMT nuts of length 600mm 15 S & F in repairof rubber washer for stop cock, bib tap, Pillar tap ,gate valve of any type all as specified and directed 16 S & F in repair brass spindle/disc suitable for Cp piller tap,cp bib tap,angle cock all as specified and directed 17 S & F in repair Peg stays to steel windows. 18 S & F in repair mild steel handles to steel windos all as specified and directed 19 S & F in repair 32mm bore PVC waste down take pipe 900 to 1000mmfixed in WHB. 20 S & F in repair 40 mm bore PVC waste down take pipe 900 to 1000mm fixed in sink. 21 S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches.in cluding taking down complete all as specified 22 S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches.in cluding taking down complete all as specified 23 S & F 75 mm bore PVC (SWR) bends of any radius. 24 S & F 110 mm bore PVC (SWR) bends of any radius. 25 S & F 75 mm bore PVC (SWR) Vent Cowl. 26 S & F 110 mm bore PVC (SWR) Vent Cowl. 27 S&F in repairtoilet paper holderwith flat recessed type stainless steel complete all as specified and directed 28 S&F in repair health faucet ((ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall 1.25 m long flexible tube and ABS wall hook including making connection and fixed in position complete all as spd 29 S&F in repair 32mm dia Waste coupling, brass , chromium plated for glazed ware , basins , etc. with long screwed shanks and fly -nuts , flange end bedded in red lead cement and other end fixed 30 S&F in repair 32 mm dia Waste coupling, brass , chromium plated for glazed ware , kitchen sink , etc. with long screwed shanks and fly -nuts , flange end bedded in red lead cement and other end fixed 31 S&Fin repair tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges ofbrass chromium plated including brackets. complete all as specified and as directed. Make : cera or its equivalent 32 S&F in repair Brass CP wash hand basin mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15mm bore complete all as specified and as directed 33 S&F in repair angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe. 34 S&F in repair two way bib cock/angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe. 35 S&F in repair Stop valve cast copper alloy screwed down high pressure with capston headed handle chromium plated concealed type screwed both ends for iron pipe 15 mm bore or for unions 36 S&F in repair brass CP shower rose 125mm size including fixing to GI pipe or unioncomplete all as specified and directed. 37 S&Fin repair CP bib taps cast copper alloy with capston headed handles, screwed down screwed for iron pipe 15 mm bore or for brass ferrule complete fixed in repair. 38 S&F in repair plastic water closet seat cover, Cream / white colour, closed pattern with flat bottom and cover and mild steel chromium plated aluminium hinging device for pedestral pattern WC. 39 S & F in repair 600mmx450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC board or plywood and fixed to plugs with chromium brass screws and cup washers.make cera or eqvl. 40 S & Fin repair 600mmx450mm mirror cabinet of selected quality glass, mounted on PVC Shutter of the cabinet and fixed cup washers complete all as specified and directed. 41 S&F in repair glass self assembly consisting of 5.5 mm thick glass sheet glass self 12 Cm wide with CP bracket gaurd and railing 60 Cm long all as specified. 42 S&F in repair Gun metal, globe or gate valve with iron wheel head, 20 mm bore,screwed both ends for iron pipe complete. 43 S&F in repair Door seal (Snake guard) with Aluminium frame powder coated up to 900 to 1000mm door opening complete all specified 44 S&F in repair Vitreous China Ware Wash hand basin white flat back size 550mmx400mm without pedestal, cutting for and pinning ends of brackets or erecting stand including CP coupling 32mm diacomplete all as specified. 45 S&Fin repair Vitreous China Wash down water closetpan (Pedestal pattern), white incl P or S trap and in cludingplastic seat cover etc (excluding flushing cistern and flush pipe) complete all as specified and as directed 46 S& F inrepair one piece EWC with soft closing seat cover and fittings complete, 710 x 370 x 745 mm, modern curvy design with flushing efficiency 3.90/2.10 LPF complete, the shade of EWC to be approved by Engr in Charge, complete all as specified and directed by Engr-in-Charge. 47 S&F in repair vitreous china squatting pan Orissa pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap andcomplete all as specified and as directed 48 Dismantling AC (corrugated or semi corrugated) sheets in roof covering. 49 M&L for Pre painted galvalume aluminum zinc coating GI bassed corrugated steel sheet 0.50mm thick & AZ-150 of any colour having tensile strength of 550 Mpas in Roof covering fixed with self Tapping screw complete. 50 Dismantling structural steel work including doors, gates,guard bars but excluding framed trusses etc. 51 M&L Rolled section as in Rafter purline strut etc using MS angle FI or hollow square section Fe-290(Gde E-165) etc including cutting welding nut bolt etc complete 52 M&L for framed work as in door or gates of angle or other section complete drilled for fixing of steel sheeting or other covering etc. to be prepared for hanging with and including hooks or hinges and hanging also fastening and fixing complete con 53 S&F mild steel plain black sheet 1.00mm thick as in covering to doors shutters etc cut to size edges beaded holes punched, including rounded scraws or rrivets and fixed to wooden steel memberes etc with plain 40mm lap joints or walds/reavated inlcluding b 54 M&L forwelding in repair n.exe 2.5 cm in length on metals to be welded n.exc. 6 mm thick each. 55 Dismantlingfloor, hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises and removing the debris outside from defence land complete all as specified and directed . 56 M & Lfor joint free Non - skid Ceramic Coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in CM 1:4complete all as specified 57 M&L for joint free non skid coloured Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete complete all as specified 58 M & L for Joint free Glazed ceramic Coloured tiles in vertical/dado surface 450mmx300mmx7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over & including 10mm thick rough cement plaster to receive tiles in CM 1:4including dismantling of tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified 59 M&L for 20mm thick granite (pure black) work (table rubbed and polished) in steps, jambs pillars, window cills ,cooking platform and like including pointing in white cement (1:2) using marble dust with admixture of pigments to match with shade or granite over including 15mm thick screed bed or bedding layerin cement mortar 1:6etc complete all as specified and directed.Note:- The stone slab shall be in one piece over kitchen plateform,window cill and making gas pipe holes 25mm dia with rounded holes and all open edges to be half rounded. 60 Demolition of Cement concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and directed. 61 M&L for 40mm thick PCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in flooring finishing the surfaces even & smooth without using extra cement complete all as specified and directed. 62 M&L for 75mm thick cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in sub base of flooring complete all as specified and directed. 63 Demolition of Roofs, floors (other than ground floors), beams staircases, landing, cooking platform ,chajjas, & similar suspended work cement concrete is reinforced (reinforcement cut as required to facilitate demolition) and disposal of debris out of MoD land complete all as specified and directed.Note:- Demolition will be done only by mechanical cutter only . 64 M&L for RCC type B-1 (1:2:4) using 20 mm graded crushed stone aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like such as cover slab of septic tank/soak well etc complete all as specified and as directed. Note:- Reinforcement shall be measured and paid separately). 65 Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200mm thick (Horizontal or sloping) Rough finished surfaces of concrete flat complete all as specified and as directed 66 M&L for Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and as directed. 67 M&L for Cement concrete tiles 300mm x 300mm x20-22mm thick, rubber moulded colouredglossy finish (50% red & 50% yellow) with grey cement & pigment machine pressed; set, jointed & pointed in neat cement slurry in floors ,path & cut , polished over and including dismantling of tile and, 20mm thick secreed bed or bedding in CM 1:6 complete all as secified and as directed. 68 Dismantling of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar 69 M&L Sand filling 25mm thick under floors or in foundations including watering and consolidation complete all as specified and as directed. 70 M&L for 60 mm thick pre polished rubber moulded colouredglossy finish (50% red & 50% yellow) machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and no pigment complete all as specified and as directed by the Engr-in-Charge. 71 M&L for non abrasive paving (endura) tiles 300mm x 300mm x10mm thick (square/ rectangular) polished, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement over &including dismantling of tile and, 15mm screed bed CM 1:4 to matchand including taking down old tiles complete al as specified and directed.Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles as directed ny Engr-in-charge. 72 Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. 73 M&L for brick work with sub class B brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. 74 M&L for Brickwork with fly ash old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed. 75 Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. 76 M&L for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:6, surface finished even and smooth (without using extra cement) complete all as specified and directed. 77 M&L for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4, surface finished even and fair (without using extra cement) complete all as specified and directed. 78 M&L for 5 mm thick rendering on brick work or concrete surface in cement mortar 1:3, as on ceiling, surface finished even and fair (without using extra cement) complete all as specified and directed. 79 M&L for preparation of newly plastered surface of walls including corners and applying two coats ofdistemper oil emulsion over applying of 1-2 mm thick wall care putty finish wall surface even & smooth all as specified and directed. 80 M&L for preparation of new plastered surface of walls and applying two coats of cement base paint overa coat of alkali resistant primer complete all as specified and as directed. 81 M&L for preparation of new plastered surface of walls two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade @ 1.43 litre/ 10 sqm area over and including priming coat of exterior primer applied @ 2.20 litre/ 10 sqm (weather proof/weather coat) including 1.5mm thick wall care putty 82 M&L for preparation of new plastered surface of ceiling and applying two coats of three coats of white wash complete all as specified and as directed. 83 M&L for applying two coats of Synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed. 84 M&L for preparing old plastered or unplastered wall surfacesincluding cornices,pillasters by brooming down with steel wire brushing scrapping down smoke soot,moulds moss and effloresent salts and treating oily and greasy spots etc and applying two coats of Premium water proof cement paint for external services without any brush marks on the surface all as specified and directed. Note: All painted areas site to be cleaned and hand over as earlier without any extra cost to Govt 85 M&L for complete removal of existing treatment surface externally of wall and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade @ 1.43 litre/ 10 sqm area over and including priming coat of exterior primer applied @ 2.20 litre/ 10 sqm (weather proof/weather coat) including 1.5mm thick wall care putty without any brush marks on the surface, Shade/colour shall be approved by GE, all painted areas site to be cleaned and hand over as earlier without any extra cost to Govt complete all as specified and as directed. 86 M&L for complete removal of existing treatment of walls including corners and applying two coats ofdistemper oil emulsion over applying of 2 mm thick wall care putty finish wall surface even & smoothall as specified and directed. 87 M&L for Preparing old surface ofwall including corners and applying one coats ofdistemper oil emulsionfinish wall surface even & smoothall as specified and directed. 88 Material and labour for complete removal of existing treatment on ceiling and applying two coats of white wash on ceiling, off sets, pillar etc all as directed and specified. 89 M&L for preparation of old painted surfaces of wood of any description over 10 cm width or girth and applying one coat of synthetic enamel Paint complete all as specified and directed. 90 M&L for applying one coat of synthetic enamel paint on old painted steel surfaces/concrete surfaceof any description including preparation of steel surfaces complete all as specified and directed. 91 M&L for preparation or new steel and iron surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer 92 Disconnecting existing water tank of capacity 250 ltr to 500 ltr setting a side (or lowering if required) for repairs, cleaning , etc and hoisting if required, reconnecting and refixing in position including cleaning all scale and dirt,complete all as specified and directed. 93 Disconnecting existing water tank of capacity exc 500 ltr but n.exc 1000 ltr setting a side (or lowering if required) for repairs, cleaning , etc and hoisting if required, reconnecting and refixing in position including cleaning all scale and dirt,complete all as specified and directed. 94 S & FRotational moulded polyethylene water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) tripple layer including water tank cover with locking arrangement, including tank nipple, and fixing of inlet, outlet & over flow pipes etc hoisted and fixed in position, all as specified in SSR Part I, including Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms including Dismantling of PVC/RCCwater tankscomplete all as specified and as directed. 95 All as per srl item No95 here-in-before but water storage tanks of 1000 ltrs capacity 96 S & F in repair low level flushing cistern of syphonic action type 10 ltr capacity PVC fixed to wall with bracket and screwed including PVC flush pipe complete fitting including taking out unserviceable flushing cistern and flush pipe etc. 97 S & F in repairinternal fitting (complete Kit) of low level cistern (capacity 10 ltr) such as PVC handle, PVC washer, float valve with ball & rod, syphon, piston etc complete all as specified. 98 All as per srl item No. 97 here-in-before but for single piece EWC (Vitreous china) 99 Taking down shutters of any description n. exc 1 sqm and refixing in same opening after easing, adjusting and replacement of minor nails etc, complete all as specified and directed. 100 Allas per serial item No 99 here-in-before but exc 1 sqm and nexc 2 sqm each complete all as specified and directed. 101 Resecuring or easing & adjusting, without taking down shutter of any description nexc 1 sqm each complete all as specified and directed. 102 Allas per item ser No 101 here-in-before but exc 1 sqm and n.exc 2 sqm each complete all as specified and directed. 103 Taking down chowkhats or frames exc 1.5 sqm and n. exc 4 sqm each (without taking off shutters from the frame) each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fasts shall be finished identical & make good & provn of cement concrete (1:3:6) type C-0 for fixing hold fast without any extra cost to Govt.), complete all as specified and directed by Engr-in-Charge. 104 All as per ser Item No 103 here-in-before but n.exc 1.5 sqm each complete all as specified and directed. 105 Taking down shutters of any description exc 1.0 sqm and n.exc 2.0 sqm each and removing from the site complete all as specified and directed. 106 S&F Pressed steel door frame of size 105x60mm, double rebated for doors made out of 1.25mm thick mild steel sheet including necessary fixing lugs, hinges lock strike plate etc, complete all as specified and directed. 107 S&F Pressed steel door frame of size 165x60mm, double rebated for doors made out of 1.25mm thick mild steel sheet including necessary fixing lugs, hinges lock strike plate etc, complete all as specified and directed. 108 S&F factory made 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. 109 S&F factory made 35mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) complete all as specified and directed. 110 S&F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening, as per specification and drawing complete all as specified and directed. 111 S&F Factory made solid panel PVC door shutter 24 to 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded both side prelam PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specification & drawingcomplete all as specified and directed. 112 S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples or using metal nut and bolts complete all as specified and directed. 113 S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or using metal nut and bolts complete all as specified and directed. 114 S&F stainless steel butt hinges of size 100mmlongetc complete all as specified and directed. 115 S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, Length of bolt in 150mm complete all as specified and directed 116 S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, Length of bolt in 200mm complete all as specified and directed 117 S&F Aluminium handles, cast type, anodised Size of handle in 150mm complete all as specified and directed. 118 S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or castaluminium alloy and fixed Length of bolt in 250 mm complete all as specified. 119 S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor Overall length of cover plate 140mm complete all as specified and directed. 120 S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate including welding to steel frames.complete. 121 S&F in repair stainless steel butt hinges of size 100mmlongetc complete all as specified and directed. 122 S&F in repair Aluminium, anodised, barrel tower bolts of extruded section and fixed, Length of bolt in 150mm complete all as specified and directed 123 S&F in repair Aluminium, anodised, barrel tower bolts of extruded section and fixed, Length of bolt in 200mm complete all as specified and directed 124 S&F in repair Aluminium handles, cast type, anodised Size of handle in 150mm complete all as specified and directed. 125 S&F repair Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or castaluminium alloy and fixed Length of bolt in 250 mm complete all as specified. 126 S&F in repair Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor Overall length of cover plate 140mm complete all as specified and directed. 127 S&F in repair 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate including welding to steel frames.complete. 128 S&F in repair Plain fillets 2nd Class hardwood not exc 3 sq. cm, square, rectangular or triangular in section, chamfered or rounded on one edge or face, secured with nails and fixed complete all as specified and directed. 129 S&FPlain, solid, straight chowkats or frames of any type of 2nd Class hardwoodsquare, rectangularin section, chamfered or rounded put together with glue, pinned at joints and fixed complete all as specified and directed. 130 S&F in repair cast iron body hydraulic door closers universal type designation No 3 suitable for door shutters of 851 to 1000 mm wide complete all as specified and directed. 131 S&F in repair stainless steel peg set of five with chromium plated back plate 304 grade, 40mm wide fixed with chromium plated screw complete all as specified and directed. 132 S&F in repair 18 - 20 mm thick PVC prelaminated board with one sidedecorative choice laminate and other side plain balacing white colour as in cup board shutters and frames, kitchen cabinet frontshutter, partion, shelf, & drawer, fixed with screws, solvent cement / adhesive including taking down old shutters complete all as specified and directed by the Engineer-in-Charge. 133 S&F hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws, Size of hasp and staple in mm 100complete all as specified and directed. 134 S & FContinuous (piano) hinges 30mm Width of flaps (when open) ,mild steel, bright finish or electrogalvanised complete all as specified and directed 135 S&F 40 mm dia, cupboard knobs fixed with nut, screw and washer of stainless steel, bright finished complete all as specified and directed. 136 S&F magneticcatcher and striking plate including letting in and fixed complete all as specified and directed. 137 S & F in repair Mild steel Drawers handles, projections drop (50mm to 65mm) on screwed plate 138 S&F in repair 25mm outer dia stainless steel decorative drapery rodof thickness 20 gauge and for every 01 RM length, provide 10 numbers stainless steel rings with 50 mm dia and proportionate for part there off, with stainless steel brackets near to ends with stainless steel finish for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clear opening of doors/windows. ( Including necessary fittings) 139 S&F steel window/Ventilator factory made box type and shutter (double shutter) with sash bar made out ofsection using flash butt welding, hinges shall be provided to both shutters complete including all fittings including grills made out of 10 mm dia round bars glazing with 3 mm thick oridinary glass, guaging (wire mesh stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples or using metal nut and bolts ) and two coat synthetic enamel paint over and including a coat of red oxide primer allas per drg No CEPZ/ TD/032/13 Sheet 1/2 including taking out old windows complete all as specified & directed. 140 Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads and fixed complete all as specified and directed. 141 S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square of any size pane and fixed complete all as specified and directed. 142 All as per serial item No 141 here-in-before but frosted glass complete all as specified and directed. 143 M&L for Securing old glass of any description in existing steel/wooden frames glazed with putty/beads including removing loose or decayed putty/beads, reputtying to match existing work etc. and fixed complete all as specified and directed. 144 S&F in repair corner glass shelves 225mm fixed to wooden plugs with chromium plated brass screws and cup washers complete. Make:Cera or equivalent.. 145 M&L for Stainless steel plate rack(Utensil Rack) of size (900mm x 750mmx250mm ) made out of AISl 304 stainless steel 0.63 mm thick sheet fixed with brass screw of required size including necessary fittings/nuts,bolts & washers including in repair complete all as specified and as directed. 146 S&F in repair stainless steel soap dish, any type fixed to plugs chromium plated brass screws complete.Make:Cera or equivalent. 147 S&F in repair 75mm PVC floor trap, ISI marked withcp grating with/without waste pipe hole incl jointing to waste pipe fixed with solventcement complete all as specified and as directed. 148 S&Fin repair towel Ring round with round flange ofbrass chromium plated including brackets. complete all as specified and as directed.Make:Cera or equivalent. 149 S&F in repair stainleess steel towel rack 600 MM long with lower hanger, fancy type, superior quality, fixed with and including chromium plated screws and wooden/plastic cleats complete all as specified and directed by Engr-in-Charge. Make : ACN-CHR-1181S of JAQUAR or equivalent in ESS ESS, Players. 150 S&F in repair 15mm bore brass wall mixer 3-in-1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting legs & wall flange mixing hot and cold water, screwd down for 15mm dia iron pipe complete all as specified and as directed by Engr-in-Charge. (Note:- Hand shower & over head shower will be measured and paid separately). 151 S&F in repair hand shower dia 105 mm round shape single flow with air effect (ABS BODY & FACE PLATE CHROME PLATED) with rubit cleaning system including shower flexible tubes 8 mm dia & 1.5 m long with nutscomplete all as specified and directed by Engr-in-Charge. 152 S&F in repair kitchen sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, couplingincluding bedding in cement mortar on to dwarf wall or including fixing cantilever brackets andconnecting union to pipe, overall size 915mmx460mm bowl size 410 mmx330mmx 160mm etc complete all as specified and as directed.Make :Nirali or equivalent 153 M&L for Preparing surface of sunken slab in toilet flooringand applying 15 mm thick cement plaster 1:4 cement sand mortar with integral water proofing compound both on floor and wall. including, laying and testing ofbituminous coating system based on bituminous emulsion, including application of one coat of primer and laying of app membrane as per manufacturer specification in sunken portion withand including sunken floor shall be filled with brick concrete 1:4:8 as per existing thickness ,a pipe of dia 40mm 600mm long GI spout incl. fitting in floor and incl.demolition of sunken floor upo slab complete all as specified. 154 S&F in repair GI socket 15mm bore medium grade ISI marked complete all as specified and directed.Note: Cost of taking down GI tubing for replacement of worn out/defective GI fitting & refixing there after shall be deemed to be included in the rates quoted by the contractor 155 All as per Srl item No. 154 here-in-before but GI elbow 15 mm dia. 156 All as per Srl item No. 154here-in-before but GI nipple 15 x 50mm 157 All as per Srl item No. 154 here-in-before but GI nipple 15 x 75mm 158 All as per Srl item No. 154here-in-before but GI union coupling 15 mm dia 159 All as per Srl item No. 154 here-in-before but GI nipple 15 mm dia for tank. 160 All as per Srl item No. 154 here-in-before but GI tee 15 mm dia. 161 S&F in repair GI socket 20mm dia medium grade ISI mark complete all as specified and directedNote: Cost of taking down GI tubing for replacement of worn out/defective GI fitting & refixing there after shall be deemed to be included in the rates quoted by the contractor 162 All as per Srl item No. 161 here-in-before but GI elbow 20 mm dia. 163 All as per Srl item No. 161 here-in-before but GI nipple 20 x 50mm 164 All as per Srl item No. 161here-in-before but GI nipple 20 x 100mm 165 All as per Srl item No. 161here-in-before but GI union coupling 20 mm dia. 166 All as per Srl item No. 161here-in-before but GI nipple 20 mm dia for tank. 167 All as per Srl item No. 161here-in-before but GI tee 20 mm dia. 168 Sch A E/M Work:-M & L for point wiring in repair for light / fan controlled by one switch with 1.50 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable in existing PVCconcealed conduit terminated in new anodise pressed steel sunken box having thickness not less than 2 mm with 3 mm thick ISI marked bakelite laminated sheet fixed with cadmium plated screws and washers for switches and sockets, including 1.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS as earth continuity conductor connected to common earth dolly including, cutting chiseling for concealed boxes, including insulation test of point wiring andmaking good disturbed surface areaand white wash/colour wash to matching with the existing colour including taking down of old existing wiring any type and all as specified .Note: colour coding is to bemaintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green). 169 All as per Srl item No 168 here-in-before but for call Bell point complete all as specified and directed . 170 All as per Srl item No 168 here-in-befor but for 5 pin 5 amps socket outlet or independent board complete all as specified and directed. 171 All as per Srl item No 168 here-in-befor but for 3 pin 5 amps socket outleton the sameboard with other switch complete all as specified and directed. 172 M & L for point wiring in repair with 2.5sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable in existing PVCconcealed conduit terminated in new anodised pressed steel sunken box having thickness not less than 2 mm with 3 mm thick ISI marked bakelite laminated sheet fixed with cadmium plated screws and washers for switches and sockets, including 2.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS as earth continuity conductor connected to common earth dolly including, cutting chiseling for concealed piping ,including insulation test of point wiring andmaking good disturbed surface areaand white wash/colour wash to matching with the existing colour including taking down of old existing wiring any type and all as specified .Note: colour coding is to bemaintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green). 173 S & F in replacement switch piano flush type one way 5 amps SP 240 volts complete all as specified and directed. 174 S & F in replacement switch piano flush type one way 15 amps SP 240 volts complete all as specified and directed. 175 S & F in replacement socket outlet 2 in 1, 3 pin 5 amps flush type 240 volts complete all as specified and directed. 176 S & F socket outlet 2 in 1, 5 pin, 5 and 15 amps flush type 230 volts complete all as specified and directed. 177 S & F in replacement switch Bell push, flush type, 5 amp one way complete all as specified and directed by Engr-in-charge. 178 S & F in replacement ceiling fanregulator electronicsocket type 5 stage speed variation ISI marked complete all as specifiedanddirected. 179 S & F in replacement lamp holder/batton holder/angle holder insulated body with bakelite back plate suitable for fittings complete all as specifiedand directed. 180 S & F in replacement of Bell Ding Dong, AC 230 Volts single Phasecomplete all as specified and directed by Engr-in-charge. 181 S & F in replacement ceiling rose 65 x 50mm three terminals complete all as specified and directed. 182 S&F in replacement sleek LED mirror light fitting 2 feet long 1x10 W including LED tube 2 feet long of same make having ballast , bipin holder, connector block etc. complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of suitable size complete all as required at site or directed. 183 S & F in replacement of LEDLamp, B22type ,12 watt,complete all as specified and directed. 184 S & F in replacement energy saving decorative LED 20W boxtype (4 Feet),frame ,light fitting extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete with all accessories prewired without tube and making connections with 3 core twisted flexible copper cable of suitable size from ceilling rose/PVC connector to light fittings complete all as spd and directed by Engr -in -charge. 185 S & F in replacement LED Bulkhead fitting 10 watt all as specified and directed by Engr-in-charge. 186 S&F in replacement LED decorative wall light fixturemade up of polycorbonate, suitable for retro fit LED Lamp alongwith 12W LED lamp complete all as specified and as directed. 187 M & L for providing/ cutting the round/ square hole of required size in wall finishing thedistrubed surfaces as per existing finishes complete all as spd and supply and fixing MS ventilating fansSingle phase, 230 volts 225/230 mm or 9” H.D EX Fan (900 RPM) complete and supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor and writting MES No. with black synthetic enamel paint 2.0 cm high complete all as spd and directed by Engr-in-charge. 188 S & F in replacement 20mm Rigid non-metallic PVC conduit heavy duty exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and directed. 189 S & Finreplacement of existing unsv sheet metal enclosure with sheet metal enclosure MCB distribution board single pole and neutral with a two pin and earth plug and socket 20 amps 240 volts, complete with one single pole MCB of 20 amps C curve complete all as specified and directed . 190 S & Finreplacement of sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases in wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed. 191 M & Lin replacement for MCB SP 240 volts any rating from 6 to 40 amps, C cruve with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed. 192 M & L in replacement for MCB SPN 240 volts any rating from 6 to 40 amps,C cruve with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed. 193 S&F in replacement sub Main Wiring with two PVC insulated unsheathed multistrand FRLS flexible copper conductor cable of size 2x6 sqmm and one PVC insulated multistrand unsheathed FRLS flexible copper conductor cable of size 6 sqmm(green colour)as earthing lead connecting to main earthing dolly drawn in and including non metallic PVC concealed conduit 20mm dia complete andmaking good to disturbed surface complete of wall/floor with cement mortar and finishes to match the existing surface complete all as specified and directed. 194 All as per srl item No 193 here-in-before but submain wiring with 2 single core 4 sqmm and one 4 sqmm as eathing lead complete all as above but 4.00 Sqmm 195 S & F in replacement of old unsvsheet metal enclosures distribution boards, double door three phase 415 volts 4 ways vertical TPN DB for comprisingthree phase four wire copper strip bus bar of appropriate capacitycomplete all as specified and directed and comprising of the following (a)MCCB FOUR POLE 63 AMPS AC415 VOLTS25 KA=01 NOas incoming and 12 nos. MCB SP 40 Amps, C series as outgoing. ( (i) MCCB, MCB and DB should be of same make. (ii) The DB shall be flush fixed ,and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost.(iii)connection of theMCCBs/ MCBs with cableshall be made through appropriate size pin /bottle type thimble -properly crimped.(iv)all the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) double continuous earth wire shall be provided for each three phase DB from earthing mains dolly. 196 S & F in replacementbldg secuirty light fitting energy saving high efficiency LED street light fitting 35 Watts, 5700 K, IP 66, having pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, prismatic polycarbonate cover complete including GI bracket of size 25 mm dia bent to shape having length on less than 0.9 mtr fixing with clamp etc and making connections using cord flexible 3 core copper cable of size 23/ .0076 from ceilling rose/ PVC connector to light fittings or as directed by Engr-in-chrage. 197 S&F in replacement MCCB 4 Pole 63 Amps, thermal magnetic releasehaving, breaking capacity 25 KA, 415 Volt in the existing TPN DB including any addition / alteration to the DB to accommodate the new MCCB and connectionscomplete all as specified and as directed by Engineer-in-Charge. 198 Maintenance of storage type electric water heater capacity 25/50 Ltrs comprising of the following activities : -(a)Taking down by disconnecting electric and water connection and making visual inspection opening and dismantling, de-scaling, brushing and cleaning of storage tank of any type and checking of each item for its servicieability and reasssemebed the same after necessary repair and testing complete all as specified and directed.(b) Checking the earth continuity of gysers water heater and accessories, complete all as specified and directed.(c) Visual examination of fusible plug, complete all as specified and directed. 199 S&F in replacement PVC flexible copper cable sheathed 3 core, 2.5Sqmm, universal colour code, complete all as specified and directed by Engineer-in-charge. 200 S&F in replacement heatingelement 2.0 KW & testing of electric connections as per site requirement, complete all as specified and directed. 201 S & F in replacement thermostate of 25/50 Ltrs capapcity, 250Volts,AC and testing complete all as specified and directed. 202 S & F in replacement PVC connection of size 15mm dia and 450mm long superior quality for Geyser, complete with brass adopted for Geyser hot/cold, complete all as specified and directed. 203 S&F in replacement metalclad plug top 20Amps,complete all as specified and directed. 204 S&F in replacement Plug top 15Amps,complete all as specified and directed. 205 S & F in replacement syphon assembly complete for 25 Ltrs capacity Geyser as exisiting on ground complete all as specified and directed. 206 S&F in replacement indicator lamps to Geyser of any make type & capacity complete all as specified and directed. 207 S&F in replacement inner tank of Geyser of capacity 25Ltrs of suitable size as per site requirement, make of steel as per exisitng gauge, complete all as specified and directed. 208 S&F in repair pressure release valve of geyser (ISI marked) of 15mm dia with rubber washer as per site requirement, complete all as specified and directed. 209 M & L for earthing complete with galvanised steel earth plate electrode , 600 x600 x 6mm thick burried directly in the ground (earth pit not less than 2.25 mtr deep below ground level)withtop edge of the platenot less than 1.5mtr below ground level connected to galvanised iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point , GI tubing 15 mm bore light grade protection pipe , GI watering pipe 20mm bore light grade with funnel and wire mesh , charcoal ,salt packed around the earth plate and precastPCC 1:2:4 (Nominal mix ) reinforced with XPM having weight not less than 4 kg /sqm including suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover including earth workin any type of soil , removal of surplus soil to a distancen.exc 50m and connecting , testing on completion completeall as shown on electricplate No 03 of SSR -2009 Part I complete all as specified and directed.(Note: Excavation and earth work is deemed to be included in the rates quoted). 210 S & F in replacementGang Box for 15 Amp Switch socket combined including 15Amp combiation complete all as specified and directed by Engr-in-charge. 211 S & F in replacementGang Box for 5 Amp Switch socket combined including 5Amp combiation complete all as specified and directed by Engr-in-charge. 212 S & F in replacement Hylum sheet 4x4 to 4x6 inches for fixing of switchs socketsincluding cuttingfor switch socket and fixing to existing sunken box withbrassscrew complete all as specified and directed by EIC 213 S & F in replacement Hylum sheet 6x10 to 8x10 inches for fixing ofswitchs socketsincluding cuttingfor switch socket and fixing to existing sunken box withbrassscrew complete all as specified and directed by EIC 214 Taking down carefully 1200/1400mm sweep ceiling fan any makefrom the hook of OTM/MD Accn carrying to the wksp including rehanging the same at existing position after cleaning, greasing and connecting up with PVC insulated copper flexiblewire 3 x single core 1.0 Sqmm from ceiling rose to connector of fan complete all as specified and directed by Engr-in-Charge .NOTE :-1. PVC copper flexible wire 1.0 Sqmm single core( 3 runs each) shall be measured and paid separately under relevant item. 2. Total service time from taking down to rehanging must not exceed 3 Days. 3. T&P such as ladder and vechicle will be provided by contractor at their own expense. 215 Strip opening of ceiling fan 1200mm sweep and carrying out rewinding with proper grade/guage super enamelled copper winding wire so as to achieve original specifications i.e current rating and RPM (RPM test of ceiling fan with suitable tachometer will be done by contractor and shown to deptt , tachometer will be provided by contractor at their own expense) and all insulating materials (spares will be used and measure in respective items) and reasembling etc complete all as specified and directed by Engr-in-Charge.Note :- 1.Under liability period ,in case winding or any accessory i.e capacitor,becomes non functional, it will be repaired without any extra cost within 5 days of complaints received. 216 S&F ball bearings suitable for ceilingfans/exhaust fans of size 6201complete all as specified and directed by Engr-in-Charge complete 217 All as per srl item No. 216 here-in-before but of size 6202 complete. 218 All as per srl item No. 216 here-in-before but of size 6203 complete. 219 All as per srl item No. 216 here-in-before but of size 6204 complete. 220 Taking out existing defective/worn outcondenser any size/make andmaterial and labour for condensor of capacity 2.5 mfd ,220 V including making connectionsetccomplete all as specified and directed by Engr-in-Charge. 221 All as per srl item No.220 here-in-before but of capacity 3.15 mfd capacity. 222 All as per srl item No.220 here-in-before but of capacity 1.5 mfd capacity. 223 M&L for rewinding of stator assembly of exhaust fan/bracket fans/wall mounting fans/pedestal fans 225 to 300mm sweep after strip opening of motor with proper grade/guage of super enamelled copper wiring so as to achieve original specifications i.e current rating and RPM including all insulating materials, re-assembling and replacement of worn out nuts, bolts, rubber bushes, clamps etccomplete all as specified and directed by Engr-in-Charge. Note :- Taking down cleaning, greasing and re-fixing in position shall be measured and paid under srl item No.14 here-in-before.Note :-1. RPM test of exhaust fan with suitable tachometer will be done in the presence of Engr-in -Charge.2. No T&P will be provided by the Dept. 3.Warranty period is 1 year,in case winding or any accessory i.e capacitor, ,becomes non functional within 1 year , it will be repaired without any extra cost within 5 days of complaints received. 224 Taking out existing worn out rubber reel,clamp and supply & fixing ofrubber reel with clamps, MS nuts, bolts heavy duty of suitable size for hanging of ceiling fan to hook etc complete all as directed. 225 Taking out rusted screws & M&L for screws for fixing to different type/make blades of ceiling fans complete. 226 Taking out worn out/cracked canopy and supply & fixing canopy with screws to the celing fans of any size/make etc complete. (Set of 2 pieces) 227 Taking out rusted/worn out threaded down rodand supply & fixing down rod made out of 15 mm dia medium grade GI pipe having one side thread and on other side hole or both side threaded/hole 1.0 feet long complete. 228 Taking out existing defective flexible wireof any size and M&L for PVC copper cable flexible3 core 1.0 Sqmm 1100 volts (FR) three core fixed to ceiling fan/exhaust fan (not more than 1.0 Mtrs to each fan). 229 Taking down worn out blades of exhaust fan off size 225 to 300mm sweep and supply and fixing new blades as per sample and make to the fan refixing in existing position etc complete. 230 Attending of complaints to continue electric supply after rectify the faults like no light, short circuit, sparking, current leakage etc including providing of small piece of electric wires if required of size upto 4 Sqmm single core and length n.exc 1 mtr complete all as specified and directed by Engineer-in-Charge.Note:-(i) any accessories found unserviceable will be replaced and shall be paid under respective items. (ii) one job will be considered for each bldg/Qtr per day irrespective of the No. of complaints. 231 Note - Rate quoated above all itemsinclusive provision as under :Making arrangement for establishment of centralized complaint centre in a building authorised by Engg-in-Charge upto the contract period with following arrangements:- (a)Infrastructure required in Complaint cell i.e. telephone, furniture, stationary, transport and other necessary items/materials to establish a new complaint centre able to receive and manage complaints from the users by all means ie Manual complaint mechanism, Telephonic complaints mechanism, SMS complaint Mechanism and e-mail complaint mechanism and to maintain a consolidated list of complaints and its redressal mode indicating all its relevant data.(b)Computer data operator shall be able to manage all the necessary activities and having qualification minimum 10+02 or Equivivalent in any discipline with minimum 6 month certificate course of computer applications (from a Govt recognized institute), (c ) Provision and maintenance of all tools, plants, equipment and safely gear required for tradesmen under this contract (d) Provision of communication facilities to supervisor and tradesmen. (e) Monitoring and management of complaints report from generation to execution of complaint including pending complaints.(f)Updating status of lodged complaints simultaneously or on before closing the complaint cell on every day. (g)Provision of motorized conveyance for deployment to all tradesmen under this contract.(h)Basic inputs to be noted from the complainants will be locality, Building No, Qtr No, Name and Rank of complaint and exact nature of complaint and mobile No/ telephone(j) On lodging the complaint, the Complaint No willbe assigned for reference . Also system should indicate an approximate time for repairs.Accordingly a corresponding complaint slip shall be generated by the system with all relevant info.Complaint slip should be printed in triplicate and to be handed over immediately to Supervisor who shall detail appropriate tradesmen for repair with required materials/store. One copy of complaint shall be retained in complaint centre and two copies with tradesmen.(k)On both copies of complaint slip, status of the complaint attended shall be endorsed by the complaint/user.One copy to be retained by the complainant and second copy to be with tradesmen for handing over in the complaint centre.Reasons for non attending of complaint etc shall be recorded alongwith estimate of expected time to attend and rectifying the complaint. 232 (l) At the end of each day, summary of complaints shall be prepared and generated indicating No of complaints lodged, attended in time, Reasons for not attending , probable time required for attending the pending complaints etc(m)JE in charge of MES will review the complaints recorded in the system daily and will carry out personal inspectionof complaints attended and its status and will take remedial measures in this regard.(n)AGE will visit the complaint cell at least twice a week and GE at least once a weak to check the efficacy of the system and record their remarks accordingly.Note : Contractor shall be responsible for followings:- (i)Installation of landline telephone connection with internet broadband facility, obtaining SIM cards for mobile phones for supervisor and workers, deployed by the contractor. (ii)Payment of telephone bills, internet charges, mobile bills, expenses etcshall be borne by the contractor and no claim whatsoever on this account will be admissibleby the department. (iii)A Computer/PC System with internet Connection for the Complaints lodging and Supervising will be Provided by the Contractor and will not be paid Seperately.(iii)Space for complaint cell/Office & Store will be Provided by the Department. And for any Security Breach/Theft Activity department will not be responsible. Contractor Have to arranged All Security Things By Self.(iv) Contractor will download the web application and understand its procedure and expedite accordingly 233 Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 2,10,983.50and any other reduction if any from quoted amount.
