Tender For Special Structural Repair And Retrofitting Work In Rajasthan High Court Buiding, Jodhpur (Electrical Works) - S&F following sizes of ISI marked ( IS:14927 P - II ) virgin material UPVC trunking along with accessories like coupler, inner, outer, elbow, square box, tee, end cap etc. on surface with screws, expansion fasteners as required. For additional technical parameters of product / work refer Annexure A attached with this BSR 20 mm x 12 mm 25 mm x 12 mm 32 mm x 12 mm Providing & Fixing of modular type switch/ bell push duly ISI marked (IS :3854) with CM/L no. printed and made out of unbreakable and fire retardant vergin UV Stabilized Polycarbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating ,minimum width of switch toggle( PUSH PART ) should not less then 20mm, including all as per pre approved by Engineer in charge,making connections, testing etc. as required. For additional technical parameters of product / work refer Annexure A attached with this BSR 10 A one way switch 10 A bell push 16 Amp. 2 Module switch With Led Indicator 32 Amp. 2 Module switch With Led Indicator Providing & Fixing of modular type lockable feature socket duly made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating , including all as per pre approved by Engineer in charge,making connections, testing etc. as required. For additional technical parameters of product / work refer Annexure A attached with this BSR 6 A 3/5 pin shuttered socket 6/16 A shuttered socket 25 Amp. 2 Module Socket Providing & Fixing of following size mounting grid plates with cover plates made from fire retardent UV established high performance engineering plastic suitable for all universal metal boxes for front installation & removal direct fit type complete in all respect.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure A attached with this BSR . 1/2 Module 3 Module 4 Module 6 Module 8 Module 10 Module 12 Module Providing & Fixing of Wiring Accessories OEM fabricated following size GI box of 1.2 mm thick with earthing terminal and adjustable floating clamp in recess/ surface suitable for modular accessories as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure A attached with this BSR . 1-2 Module 3 Module 4/5 Module 6 / 8 module 10 / 12 module Providing & Fixing of 240/415 V factory fitted RCBO with overload, short-circuit and earth leakage protection with ISI marked (IS12640-2)/ conforming to IEC 61009-1, breaking capacity 10 KA, provision for pad lock, min. Electrical operation 10,000 upto 63 A rating , minimum phase termination capacity of 35sq.mm. , IP 20 contact protection with existing distribution board / sheet including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure A attached with this BSR And Also Following the guideline of Fire Safty Audit Report Issue By CE PWD Jodhpur Four pole 100/300 mA sensitivity 63 A rating Supplying and drawing PE Insulated & PVC Sheathed unarmoured telephone cable with 0.5 mm dia. Solid Annealed electrolytic grade bare Copper Conductor as per IS: 8130/84 &confirming to TEC specification GR / WIR/06-03 March 2002 in existing surface or recessed conduit/casing capping. including ferruling on each pair for Identification etc. as required. For additional technical parameters of product / work refer Annexure A attached with this BSR And Also Following the guideline of Fire Safty Audit Report Issue By CE PWD Jodhpur 4 pair Providing & Fixing of modular type 120 W Step Fan regulator duly ISI marked (IS 11037:1984 ) with CM/L no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating , including all as per pre approved by Engineer in charge,making connections, testing etc. as required. For additional technical parameters of product / work refer Annexure A attached with this BSR And Also Following the guideline of Fire Safty Audit Report Issue By CE PWD Jodhpur 5 step fan regulator 2 Module 360 dgree rotating Providing & Fixing of following modular accessories as per PWD specification for electrical Works, made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating , including all as per pre approved by Engineer in charge,making connections, testing etc. as required. For additional technical parameters of product / work refer Annexure A attached with this BSR And Also Following the guideline of Fire Safty Audit Report Issue By CE PWD Jodhpur RJ-11 telephone jack single line T.V. coaxial socket Blanking plate Modular MCB 6 A to 32 A DP Supply, Drawing and Testing of 4 pair, 23 AWG Solid Bare Copper wire insulated with PVC, UTP (Unshielded Twisted Pair), Category 6, Class E, 100 Ohm Impedance, Indoor Cable as per latest ammendments of ANSI/TIA/EIA-568 , The copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by PVC Jacket. Certified performance in a 4-connector configuration upto 100 Mtrs channel requirements & transmission frequencies up to 250 Mhz. in existing MS/PVC Conduits/casing capping including making connections to Information outlets and Patch Panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure A attached with this BSR And Also Following the guideline of Fire Safty Audit Report Issue By CE PWD Jodhpur Supply and Installation of unsheilded/360 degree sheilded Information outlets made of high impact plastic body with ABS, FR Grade halogen free material with provision for protection against dust in jack, suitable for Cat 6/6A application complying to latest ammendments, According. to Cat. 6/6A channel, It should support channel as well as components requirements of Cat.6/6A standards at frequencies of up to 250 to 500 Mhz. Cat 6/6A unshielded/shielded Jack should be suitable to terminate 4 pair, 23/24 AWG solid/stranded wire diameters, using 100 Ohm unshielded/shielded balance twisted pair cable, the jack should have tooless/impact termination on reliable copper tin plated Insulation displacement contact, with easy lock mechanism, It supports IEC 60603-7-4 and complied with ANSI/TIA/EIA 568 C.2 standard. jack should be RJ11,RJ12 & RJ45 compatible. Should support Ethernet 1.2 Gb/s ATM,Digital video and broadband/baseband analog video, Voice over internet protocal (VOIP) Specifications in existing modular/MS Boxes along with necessory connections as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure A attached with this BSR And Also Following the guideline of Fire Safty Audit Report Issue By CE PWD Jodhpur Cat 6, Un-sheilded Information Outlet Supply & fixing of square Faceplate for Flush / Surface Mount Information Outlets Single/Dual or Quad Aperture , material should be PC+ABS body, Suitable for RJ45 unshielded/shielded connection modules. Should match with I. O. OEM. Dimensions should be 86mm X 86mm as required complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure A attached with this BSR And Also Following the guideline of Fire Safty Audit Report Issue By CE PWD Jodhpur Single Aperture Supply , Installation and Testing of 4 pair, 100 Ohm impedance, Cat 6/6A /Class E/Ea patch cords should be constructed of minimum 23/24 AWG, stranded bare Copper cable with FRPVC/LSZH Jacket, with an enhanced performance by factory moulded RJ45 connectors with strain relief boots as per ANSI/TIA/EIA 568-C.2 suitable for Cat 6/6A application complying to latest ammendments Category 6/6A Standards, According. to TIA568C.2, ISO/IEC 11801, EN 50173, IEC 60603-7-51, EN 60603-7, IEEE 802.3an minimum requirement for 1G BASE-T to 10G BASE-T performance. Patch cords shall be straight thru cable compatible with both T568-A and T568-B wiring schemes, should support IEEE 802.3af / IEEE 802.3at for POE applications, Minimum 750 to 1000 mating cycles in plug contacts for long durability, Should support Ethernet 10GBASE-T, 1.2 Gb/s ATM, Token ring 4/16, Digital video and broadband/baseband analog video, Voice over internet protocal (VOIP).All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure A attached with this BSR And Also Following the guideline of Fire Safty Audit Report Issue By CE PWD Jodhpur Cat 6, U/UTP (Unscreened/Un-sheilded Twisted Pair) Patch Cord 2 Mtr Supplying and fixing of power plug point with Modular accessories as per PWD specification for electrical Works, on hot dipped galvanized modular box of 1.2 mm thick with earthing terminal/connector on surface or in recessed with suitable size of modular face place with grid plate and cover plate including cost of ISI marked modular 16 amp. Switch (IS :3854) and 6/16 amp. socket outlet (IS:1293) making connection , testing , etc. as required. For specification of Wiring accessories refer Chapter E - 07 related item & For additional technical parameters of product / work refer Annexure A attached with this BSR And Also Following the guideline of Fire Safty Audit Report Issue By CE PWD Jodhpur P & F 1.2mm thick M.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure A attached with this BSR And Also Following the guideline of Fire Safty Audit Report Issue By CE PWD Jodhpur Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure A attached with this BSR And Also Following the guideline of Fire Safty Audit Report Issue By CE PWD Jodhpur Single pole MCB (With B/C curve tripping Characteristics) 6 A to 32 A rating Four pole MCB (With B/C curve tripping Characteristics) 50/63 A rating Providing & Fixing of Recessed/surface mounting heavy duty Vertical TPN Distribution board with Metal end box with provision of incomer suitable for MCB / RCCB and SP / TP MCB as outgoing ,made out from Galvanized steel / CRCA sheet not less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3. powder painted with reversible door (for double door DB only ) complete with insulated 100 A rating copper bus bar, neutral bars with shrouds, earth bar , color coded interconnecting wire set of suitable rating and din bar,masking sheet, making internal DB terminations with copper lugs, ferrules, detachable gland plate, including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge.For additional technical parameters of product / work refer Annexure A attached with this BSR And Also Following the guideline of Fire Safty Audit Report Issue By CE PWD Jodhpur 6 Way(8+18) 8 Way(8+24) 12 Way(8+36) Providing & Fixing of Recessed/surface mounting heavy duty horizontal type Double Door ( Metal / Glazed )Distribution board with Metal end box made out from Galvanized steel / CRCA sheet not less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3, powder painted complete with reversible door (for double door DB only )100 amp. insulated copper bus bar/shorting link , copper neutral link, copper earth link , color coded interconnecting wire set of suitable rating and din bar,masking sheet, making internal DB terminations with copper lugs, Ferrules, detachable gland plate, including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure A attached with this BSR And Also Following the guideline of Fire Safty Audit Report Issue By CE PWD Jodhpur Metal door (Three phase) IK-09 and IP-43 with Metal end box 8 Way Labour charges for removing and refixing of Ceiling fan/ Exaust fan from site Fans with Removing & Refixing at Suitable Location Supply & fabrication steel structure with MS channel / angle / joist / ISMB / sheet etc. including welding, rivetting, cutting, nut & bolt , one coat of primer & two coat of enamel paint etc. as required complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure A attached with this BSR . NON BSR Supply, Installation, Testing & Comissioning of High Speed HDMI Cable 3Mtr; HEC Support, ARC, 3D, 4K@60Hz, HDMI Gold Plated 2xHDMI 19- pin male Connectors; flexible Double shielded, PVC jacket 28 AWG cable, Black; High-speed Ethernet, bi- directional networking at up to 100 Mbps; Up to 18 Gbps at 600 MHz bandwidth; Standards and Certifications: CL3, CM, UL 20276, ISO 9002; And Also Following the guideline of Fire Safty Audit Report Issue By CE PWD Jodhpur . Supply, , Installation, Testing & Comissioning of High Speed HDMI Cable 5Mtr; HEC Support, ARC, 3D, 4K@60Hz, HDMI Gold Plated 2xHDMI 19- pin male Connectors; flexible Double shielded, PVC jacket 28 AWG cable, Black; High-speed Ethernet, bi- directional networking at up to 100 Mbps; Up to 10.2 Gbps at 340 MHz bandwidth; Standards and Certifications: CL3, CM, UL 20276, ISO 9002; And Also Following the guideline of Fire Safty Audit Report Issue By CE PWD Jodhpur . S&F following sizes Flexible steel conduit Tube With saddles,Base Type clamps, fasteners, pvc bushes, check nuts, as required including cutting jhiris in the wall and making good the same as required. For additional technical parameters of product / work refer Annexure A attached with this BSR 20 mm 25 mm 32 mm Supplying and drawing FRLS PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure A attached with this BSR And Also Following the guideline of Fire Safty Audit Report Issue By CE PWD Jodhpur 3x 1.5 sq.mm 2 x 2.5 sq. mm. + 1x1.5sqmm 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. 2 x 6.0 sq. mm. + 1 x 4.0 sq. mm. 1 x 6.0 sq.mm 4 x 6.0 sq.mm 1 x 10.0 sq.mm 4 x 10.0 sq.mm S&F following sizes (dia.) of ISI marked virgin material HMS fire-retardant heavy-duty ( IS:9537 P - III ) PVC conduit along with ISI marked (IS:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. For additional technical parameters of product / work refer Annexure A attached with this BSR And Also Following the guideline of Fire Safty Audit Report Issue By CE PWD Jodhpur 20 mm 25 mm 32 mm 50 mm Removing and refixing of Audio Video Equipment , Accessories Of VC Setup, CCTV/EPABX or any other electromechanical systems. With Properly Removed Before Renovation work Start. And Deposite Under Own Custody, After Finishing All Renovation work Of Court Block (Like Court Room , Chambers, Offices, Corridors and Registrar Office ) Refixing All Removed Articals And Making In Workable Condition As Before of Removing All These Accessories. All Works Done As Per IS, NBC And PWD Specification. Removing And refixing Airconditioner accessories like Indoor unit, OutDoor unit,VRV System, AHU System, FSU System, Duct System Grill With New Angle, Fastener Supply as Per NBCs Norms refrigerant piping , connecting cables , drain pipe etc. including shifting of dismentaled material to store complete as required. With Properly Removed Before Renovation work Start. And Deposite Under Own Custody, After Finishing All Renovation work Of Court Block (Like Court Room , Chambers, Offices, Corridors and Registrar Office ) Refixing All Removed Articals And Making In Workable Condition As Before of Removing All These Accessories. All Works Done As Per IS, NBC And PWD Specification. Removing And refixing Fire Fighting Accessories Like M.S Pipe Sprinkler, Hydent complete as required. With Properly Removed Before Renovation work Start. And Deposite Under Own Custody, After Finishing All Renovation work Of Court Block (Like Court Room , Chambers, Offices, Corridors and Registrar Office ) Refixing All Removed Articals And Making In Workable Condition As Before of Removing All These Accessories. All Works Done As Per IS, NBC And PWD Specification. Removing And refixing ,FireDetection Accessories , Fire Fighting Accessories Like Fire Detector , Armoured Cable, MS Pipe RI, Hooter, PA SystemRelated to Fire Protection complete as required. With Properly Removed Before Renovation work Start. And Deposite Under Own Custody, After Finishing All Renovation work Of Court Block (Like Court Room , Chambers, Offices, Corridors and Registrar Office ) Refixing All Removed Articals And Making In Workable Condition As Before of Removing All These Accessories. All Works Done As Per IS, NBC And PWD Specification. Removing /removing and refixing of Electric Accessories Like Ceiling fan, Exaust fan, Wall Fan, Down light, Tubelight, 2x2 Panel Light, And Other Items Which Is not Included But Connetced At Site and Refixing With Good and Running Condition With Issue Safty Certificate as per requirement. With Properly Removed Before Renovation work Start. And Deposite Under Own Custody, After Finishing All Renovation work Of Court Block (Like Court Room , Chambers, Offices, Corridors and Registrar Office ) Refixing All Removed Articals And Making In Workable Condition As Before of Removing All These Accessories. All Works Done As Per IS, NBC And PWD Specification. Dismentaling of Electric Accessories Like Ceiling Rose,Switch, Plug Point , MS Switch box, Switch Plate, Conduiting(PVC/MS),Wire Etc With Properly Removed Before Renovation work Start. And Deposite Under Own Custody, After Finishing All Renovation work Of Court Block (Like Court Room , Chambers, Offices, Corridors and Registrar Office ) Refixing All Removed Articals And Making In Workable Condition As Before of Removing All These Accessories. All Works Done As Per IS, NBC And PWD Specification.
