Tender For 80 Cusec G.Jal (Commissioning Of G.Jal Line From Area Ugr Sector-132 To Different Places Near By J.P. Town Area) Noida - Dismantling Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material, noida-Uttar Pradesh

Tender For 80 Cusec G.Jal (Commissioning Of G.Jal Line From Area Ugr Sector-132 To Different Places Near By J.P. Town Area) Noida - Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-chargebituminous road 2 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.All kinds of soil -The contractor has to dectect different utilities like sewer line,water supply line,electric cable,telephone cable gas pipe line etc using utility dectecting machine before start of excavation and shall start excavation only after getting permission of Engineer-in- Charge 3 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundaions etc. in layers not exceeding 20 cm in depth: consolidating earth deposited layer by ramming and watering, lead up to 50m and lift upto 1.50 m. 4 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level :1:3:6 (1 Cement :3 coarse sand : 6 graded stoneaggregate 20 mm nominal size) 5 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level :1:2:4 (1 Cement :2 coarse sand : 4 graded stoneaggregate 20 mm nominal size) 6 P/F M.S. specials such as tee, bends, collars, Tapers, gap pieces, including Flange Ends as requered, Painting, cutting,welding as per site requirement of MS pipe thickness etc in all respect as per direction by the E/I. 7 Providing and fixing Sluice valve shall generally confirm to IS 14846 with latest amendment, with length over flanges as per PD of IS 14846 corrosponding to BS EN-558/ ISO 5752 Basic series 3 in CI construction having metal seating ( IS 318 Gr.LTB 2). with complete compone 1- Body / Door/ Dome-cast iron IS 210 Gr. FG 2602- Sipindle- Non rising, Stainless Steel AISI 4103- Body seat/ Door face - Gun metal; IS 318 Gr. LTB 2 (rings to be press fitted and riveted; no screws allowed)4-Rivets - soft annealed brass5 - Spindle Nut - Gun metal ; IS 318 Gr. LTB 26 - Stem seal - Greased Hemp 7- Fasteners - Carbon steel 8 - Flange Drilling - IS 1538 Table 4 & 6 (9) PN 1.010-Accessories (400 mm and above) - Ball thrust bearing to be housed above the wet chamber ie. above the gland. Enclosed Spur Gear box for ease of operation , Air Plug 11-Painting/ Coating- inside & Outside epoxy liquid coated, DFT minimum 250 micron, shade RAL 5005 / 5015 (BLUE) 12- Hydro- test-( Open Ended only ) Seat; 10/16 Kg/cm2; Body15/24 Kg/cm2 13-Upto 600 mm diaManual Operarted & above 600 mm Gear box Make-Indian Valve Pvt. (IVC)/ Kirloskar / BrothersLimited (KIRLOSKAR) a) 200 mm dia 8 250 mm dia 9 400 mm dia 10 600 mm dia 11 Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) :80 mm dia 12 Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 10.00 . 13 Constructing masonry Chamber 120x120x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 10.00 . 14 Hiring of Diesel Engine ( including cost of Diesel, lubricant & Operator)

INR 2832 /-

INR 179000.0 /-

INR 89.41 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB