Tender For Replacement Of Damaged / Defective Cables / Poles Fittings And Other Miscellaneous Work At Various Roads= 1 Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminum body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2 , P. F.≥0.95, IP- 66,IK-10, CRI >80, under voltage and over voltage protection, EMIEMC As per CISPR 15 , lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K/ 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). i) 180 W 2 Supply and testing of following size one number XLPE insulated and PVC sheathed aluminum conductor armoured power cable of 1.1 kV grade conforming to IS 7098 (Part 1) 1988 as required. 3 4 X 16sq mm 4 3.5 X 25 sq mm 5 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in over head at a height of upto 16 mtrs between street light pole with sackle set, clamp, Nut-bolt etc with all accessories complete as required. 6 upto 35 sq mm 7 Supplying, Installation, Testing & Commissioning of SMC pole Box of size 250mm x 200mm x 105mm with hinged cover on surface/ recess/pole complete with aluminum connector strip - 2 Nos, MS Clamp - 2 Nos.,6-32amp. C series SPMCB- 1 No., having IP: 66 protection connection etc. as reqd. 8 Supplying & Fixing & Erection of following type Hot Dip Galvanized Octagonal Pole, suitable for wind speed up to 160 km/Hr made out of GI sheet along with suitable necessary mountings arrangements for incoming & outgoing cables/ wires, switch gears etc. with reinforced & weather proof openable inbuilt door with LN key locking arrangement etc. as required, (ii) Window size & height 75 x 250 mm, height 500mm from bottom with double arm bracket made out of 40 mm Dia GI Pipe 600 mm long with foundation bolt, Suitable size of CC Foundation, as per manufacturer recommendation, top covered etc. as required. 9 Height 12 mtr, thickness 4 mm, base plat 320 x 320 x 20mm,top dia 100mm,bottom dia 200 mm 10 Supplying, Installation, testing and commissioning of 8-11 Watt LED Mini Bollard fittingmade out of CRCA sheet, duly powder coated /Aluminium body, confirming to IP - 65, suitable for operation on 150 V to 270 V,(5500 to 6500K), 50 Hz AC Supply, having power factor ≥ 0.90, CRI > 80,Luminaries efficacy ≥ 70 lumen/watt , Driver efficiency > 85%, L-70 Life 50,000 burning hours. i/c CC foundation of suitable size with foundation bolt completeas required. (Note:- Contractor shall submit 5 Years gurantee certificate of respective manufacturer along with the fitting). 11 Supplying, installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminum body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2 , P. F.≥0.95, IP-66,IK-10, CRI >80 , under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle 30 deg- 120deg as per the application and the project requirement deg, suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 and <135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). i) 250 watt. 12 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. 13 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. 14 Painting of 12/10/8 mtr height GI street pole and mounting bracket with two or more coats of aluminum paint of approved brand & manufacture to give an even shade. etc complete as reqd. 15 Credit OLD / Unserviceable Dismantled material 16 Defective/Unserviceable LED fitting 17 Damaged Cable 18 Damaged Poles
