Supply, Assembly And Installation Of Furniture At New Office Building Of Ada , Executive Officer Working Table. Providing & Placing Executive Officer Working Table Made Out Of 18Mm Thick Isi Marked Water Proof, Termite Proof, Borer Free Plywood With 4.00Mm Thick Natural Wooden Veneer Treated With Melamine Polish Of Approved Shade On External Peripheral Part & 1.00 Mm Thick Decorative Laminate In Matching On Internal And Under Surfaces Of Table Duly Pasted With Isi Marked Adhesive Of Approved Make All Work As Per Directions And Satisfaction Of Engineer In Charge. Brief Specifications Of Table Are As Under: A) Table Size 3000(W) X 1500 (D) X 750 (H) All Dimensions In Mm. B) All Framework And Supporting Arrangements For Table And Top Shall Be Made Of Seasoned 2Nd Class Teak Wood Duly Primed With Approved Primer And Finished With Melamine Polish In Matt / Gloss Finish. C) The Table Top, Side Panels & Front Modesty Shall Be Made Up Of 18Mm Thick Isi Marked Plywood, 4.00Mm Thick Veneer On External Peripheral Part & 1.00 Mm Thick Decorative Laminate On Internal & Under Surfaces. D) Cpu & Keyboard Arrangements. Integrated Wooden Shelf For Cpu & Foldable Arrangements For Placing Keyboard Separately Made Out Of 18Mm Thick Plywood & 1.00 Mm Thick Decorative Laminate All Around Shall Be Provided. E) Under Table Storage: E1)One Under Table Drawer Type Storage Cabinet Having 03 Nos. Drawers. The Internal Dimensions Of Top Two & Last Drawers Shall Be 350(W) X 480(D) X 150(H) & 350(W) X 480(D) X 350(H)In Mm Respectively. E2)One Under Table Storage Cabinet Having 01 No. Drawer And 01 No. Openable Shutter Type Cabinet. The Internal Dimensions Of Top Drawer & Bottom Shutter Type Openable Cabinet Shall Be 350(W) X 480(D) & 150(H) & 350(W) X 480(D) X 560(H) Dimensions In Mm Respectively.The Outer Of Above Storage Cabinets & Drawers Shall Be Made Of 18Mm Thick Plywood With 4.00Mm Thick Veneer On Outer Surface And 1.00Mm Thick Laminate On Inner Surfaces. All Drawers Shall Run On Telescopic Channel Set And Openable Door Type Shutter Shall Have Minimum 02 Nos Hinges. The Telescopic Channels & Hinges Shall Be Of Make Hettich/ Hafele/Dorset/ Ozone Or Equivalent. The Drawers And Shutters Shall Have Proper Metallic Brass/ Copper/ Stainless Steel/ Brushed Finish Handles Of Adequate Size And Proper Separate Locking Arrangements. F) Electrical & Other Accessories Arrangements. The Table Shall Have Proper Concealed Provisions For Accommodating Power, Telephone, Lan, Audio & Video Cables, Electrical Points With Switches, Sockets, Ports For Electric, Telephone, Intercoms, Lan, Computer Systems, Monitors, Pbax, Printers Etc. Of Approved Make And Requirements. Suitable Space Shall Be Provided For Visitor Chairs. All Edges Shall Be Sealed With 2Nd Class Teak Wood Rounded Moulding, Decorative Moulding Or Grooves Shall Be Provided In 2Nd Class Teak Wood. The Edge Moulding & Decorative Moulding Shall Be Treated And Finished With Melamine Polish. All Work Complete Including Fabrication, Nailing, Screwing, Pasting, Transporting, Loading, Unloading, Placing, Finishing, Setting, Etc Complete In All Respect As Per Technical Specifications, Directions And Satisfaction Of Engineer In Charge. , Executive Officer Working Table. Providing & Placing Executive Officer Working Table Made Out Of 18Mm Thick Isi Marked Water Proof, Termite Proof, Borer Free Plywood With 4.00Mm Thick Natural Wooden Veneer Treated With Melamine Polish Of Approved Shade On External Peripheral Part & 1.00 Mm Thick Decorative Laminate In Matching On Internal And Under Surfaces Of Table Duly Pasted With Isi Marked Adhesive Of Approved Make All Work As Per Directions And Satisfaction Of Engineer In Charge. Brief Specifications Of Table Are As Under: A) Table Size 2200(W) X 1200 (D) X 750 (H) All Dimensions In Mm. B) All Framework And Supporting Arrangements For Table And Top Shall Be Made Of Seasoned 2Nd Class Teak Wood Duly Primed With Approved Primer And Finished With Melamine Polish In Matt / Gloss Finish. C) The Table Top, Side Panels & Front Modesty Shall Be Made Up Of 18Mm Thick Isi Marked Plywood, 4.00Mm Thick Veneer On External Peripheral Part & 1.00 Mm Thick Decorative Laminate On Internal & Under Surfaces. D) Cpu & Keyboard Arrangements. Integrated Wooden Shelf For Cpu & Foldable Arrangements For Placing Keyboard Separately Made Out Of 18Mm Thick Plywood & 1.00 Mm Thick Decorative Laminate All Around Shall Be Provided. E) Under Table Storage: One Under Table Drawer Type Storage Cabinet Having 03 Nos. Drawers. The Internal Dimensions Of Top Two & Last Drawers Shall Be 350(W) X 480(D) X 150(H) & 350(W) X 480(D) X 350(H)In Mm Respectively. The Outer Of Above Storage & Drawers Shall Be Made Of 18Mm Thick Plywood With 4.00Mm Thick Veneer On Outer Surface And 1.00Mm Thick Laminate On Inner Surfaces. All Drawers Shall Run On Telescopic Channel Set. The Telescopic Channels & Hinges Shall Be Of Make Hettich/ Hafele/Dorset/ Ozone Or Equivalent. The Drawers Shall Have Proper Metallic Brass/ Copper/ Stainless Steel/ Brushed Finish Handles Of Adequate Size And Proper Separate Locking Arrangements. F) Electrical & Other Accessories Arrangements. The Table Shall Have Proper Concealed Provisions For Accommodating Power, Telephone, Lan, Audio & Video Cables, Electrical Points With Switches, Sockets, Ports For Electric, Telephone, Intercoms, Lan, Computer Systems, Monitors, Pbax, Printers Etc. Of Approved Make And Requirements. Suitable Space Shall Be Provided For Visitor Chairs. All Edges Shall Be Sealed With 2Nd Class Teak Wood Rounded Moulding, Decorative Moulding Or Grooves Shall Be Provided In 2Nd Class Teak Wood. The Edge Moulding & Decorative Moulding Shall Be Treated And Finished With Melamine Polish. All Work Complete Including Fabrication, Nailing, Screwing, Pasting, Transporting, Loading, Unloading, Placing, Finishing, Setting, Etc Complete In Allrespect As Per Technical Specifications, Directions And Satisfaction Of Engineer In Charge. , Officer Working Table. Providing & Placing Executive Officer Working Table Made Out Of 18Mm Thick Isi Marked Water Proof, Termite Proof, Borer Free Plywood With 1.00Mm Thick Decorative Laminate Of Approved Shade On External, Internal And Under Surfaces All-Around Of Table Duly Pasted With Isi Marked Adhesive Of Approved Make All Work As Per Directions And Satisfaction Of Engineer Incharge. Brief Specifications Of Table Are As Under: A) Table Size 1800(W) X 1200 (D) X 750 (H) All Dimensions In Mm. B) All Framework And Supporting Arrangements For Table And Top Shall Be Made Of Seasoned 2Nd Class Teak Wood Duly Primed With Approved Primer And Finished With Melamine Polish In Matt / Gloss Finish. C) The Table Top, Side Panels & Front Modesty Shall Be Made Up Of 18Mm Thick Isi Marked Plywood With 1.00Mm Thick Decorative Laminate On All Surfaces Of Table. D) Cpu & Keyboard Arrangements. Integrated Wooden Shelf For Cpu & Foldable Arrangements For Placing Keyboard Separately Made Out Of 18Mm Thick Isi Marked Plywood & 1.00 Mm Thick Decorative Laminate All Around Shall Be Provided. E) Under Table Storage : One Under Table Drawer Type Storage Cabinet Having 03 Nos. Drawers.The Internal Dimensions Of Top Two & Last Drawers Shall Be 350(W) X 480(D) X 150(H) & 350(W) X 480(D) X 350(H)In Mm Respectively. The Outer Of Above Storage & Drawers Shall Be Made Of 18Mm Thick Plywood With 1.00Mm Thick Laminate On All Surfaces. All Drawers Shall Run On Telescopic Channel Set. The Telescopic Channels & Hinges Shall Be Of Make Hettich/ Hafele/Dorset/ Ozone Or Equivalent. The Drawers Shall Have Proper Metallic Brass/ Copper/ Stainless Steel/ Brushed Finish Handles Of Adequate Size And Proper Separate Locking Arrangements. F) Electrical & Other Accessories Arrangements. The Table Shall Have Proper Concealled Provisions For Accommodating Power, Telephone, Lan, Audio & Video Cables, Electrical Points With Switches, Sockets, Ports For Electric, Telephone, Intercoms, Lan, Computer Systems, Monitors, Pbax, Printers Etc. Of Approved Make And Requirements. Suitable Space Shall Be Provided For Visitor Chairs. All Edges Shall Be Sealed With 2Nd Class Teak Wood Rounded Moulding. The Edge Moulding Shall Be Treated And Finished With Melamine Polish. All Work Complete Including Fabrication, Nailing, Screwing, Pasting, Transporting, Loading, Unloading, Placing, Finishing, Setting, Etc Complete In All Respect As Per Technical Specifications, Directions And Satisfaction Of Engineer Incharge. , Officer Working Table. Providing & Placing Executive Officer Working Table Made Out Of 18Mm Thick Isi Marked Water Proof, Termite Proof, Borer Free Plywood With 1.00Mm Thick Decorative Laminate Of Approved Shade On External, Internal And Under Surfaces All-Around Of Table Duly Pasted With Isi Marked Adhesive Of Approved Make All Work As Per Directions And Satisfaction Of Engineer In Charge. Brief Specifications Of Table Are As Under: A) Table Size 1500(W) X 900 (D) X 750 (H) All Dimensions In Mm. B) All Framework And Supporting Arrangements For Table And Top Shall Be Made Of Seasoned 2Nd Class Teak Wood Duly Primed With Approved Primer And Finished With Melamine Polish In Matt / Gloss Finish. C) The Table Top, Side Panels & Front Modesty Shall Be Made Up Of 18Mm Thick Isi Marked Plywood With 1.00Mm Thick Decorative Laminate On All Surfaces Of Table. D) Cpu & Keyboard Arrangements. Integrated Wooden Shelf For Cpu & Foldable Arrangements For Placing Keyboard Separately Made Out Of 18Mm Thick Isi Marked Plywood & 1.00 Mm Thick Decorative Laminate All Around Shall Be Provided. E) Under Table Storage: One Under Table Drawer Type Storage Cabinet Having 03 Nos. Drawers. The Internal Dimensions Of Top Two & Last Drawers Shall Be 350(W) X 480(D) X 150(H) & 350(W) X 480(D) X 350(H)In Mm Respectively. The Outer Of Above Storage & Drawers Shall Be Made Of 18Mm Thick Plywood With 1.00Mm Thick Laminate On All Surfaces. All Drawers Shall Run On Telescopic Channel Set. The Telescopic Channels & Hinges Shall Be Of Make Hettich/ Hafele/Dorset/ Ozone Or Equivalent. The Drawers Shall Have Proper Metallic Brass/ Copper/ Stainless Steel/ Brushed Finish Handles Of Adequate Size And Proper Separate Locking Arrangements. F) Electrical & Other Accessories Arrangements. The Table Shall Have Proper Concealed Provisions For Accommodating Power, Telephone, Lan, Audio & Video Cables, Electrical Points With Switches, Sockets, Ports For Electric, Telephone, Intercoms, Lan, Computer Systems, Monitors, Pbax, Printers Etc. Of Approved Make And Requirements. Suitable Space Shall Be Provided For Visitor Chairs. All Edges Shall Be Sealed With 2Nd Class Teak Wood Rounded Moulding. The Edge Moulding Shall Be Treated And Finished With Melamine Polish. All Work Complete Including Fabrication, Nailing, Screwing, Pasting, Transporting, Loading, Unloading, Placing, Finishing, Setting, Etc Complete In All Respect As Per Technical Specifications, Directions And Satisfaction Of Engineer In Charge. , Officer Working Table. Providing & Placing Executive Officer Working Table Made Out Of 18Mm Thick Isi Marked Water Proof, Termite Proof, Borer Free Plywood With 1.00Mm Thick Decorative Laminate Of Approved Shade On External, Internal And Under Surfaces All Round Of Table Duly Pasted With Isi Marked Adhesive Of Approved Make All Work As Per Directions And Satisfaction Of Engineer In Charge. Brief Specifications Of Table Are As Under: A) Table Size 1200(W) X 750 (D) X 750 (H) All Dimensions In Mm. B) All Framework And Supporting Arrangements For Table And Top Shall Be Made Of Seasoned 2Nd Class Teak Wood Duly Primed With Approved Primer And Finished With Melamine Polish In Matt / Gloss Finish. C) The Table Top, Side Panels & Front Modesty Shall Be Made Up Of 18Mm Thick Isi Marked Plywood With 1.00Mm Thick Decorative Laminate On All Surfaces Of Table. D) Cpu & Keyboard Arrangements. Integrated Wooden Shelf For Cpu & Foldable Arrangements For Placing Keyboard Separately Made Out Of 18Mm Thick Isi Marked Plywood & 1.00 Mm Thick Decorative Laminate All Around Shall Be Provided. E) Under Table Storage: One Under Table Drawer Type Storage Cabinet Having 03 Nos. Drawers. The Internal Dimensions Of Top Two & Last Drawers Shall Be 350(W) X 480(D) X 150(H) & 350(W) X 480(D) X 350(H)In Mm Respectively. The Outer Of Above Storage & Drawers Shall Be Made Of 18Mm Thick Plywood With 1.00Mm Thick Laminate On All Surfaces. All Drawers Shall Run On Telescopic Channel Set. The Telescopic Channels & Hinges Shall Be Of Make Hettich/ Hafele/Dorset/ Ozone Or Equivalent. The Drawers Shall Have Proper Metallic Brass/ Copper/ Stainless Steel/ Brushed Finish Handles Of Adequate Size And Proper Separate Locking Arrangements. F) Electrical & Other Accessories Arrangements. The Table Shall Have Proper Concealed Provisions For Accommodating Power, Telephone, Lan, Audio & Video Cables, Electrical Points With Switches, Sockets, Ports For Electric, Telephone, Intercoms, Lan, Computer Systems, Monitors, Pbax, Printers Etc. Of Approved Make And Requirements. Suitable Space Shall Be Provided For Visitor Chairs. All Edges Shall Be Sealed With 2Nd Class Teak Wood Rounded Moulding. The Edge Moulding Shall Be Treated And Finished With Melamine Polish. All Work Complete Including Fabrication, Nailing, Screwing, Pasting, Transporting, Loading, Unloading, Placing, Finishing, Setting, Etc Complete In All Due Respect As Per Technical Specifications, Directions And Satisfaction Of Engineer In Charge. , Providing, Supplying & Installation Of Center Table Glass Centre Table - Size- (L)1100Mmx(D)600Mmx(H)440Mm Supplying And Placing In Position Of Center Table Made Up Of Metal / Wooden Frame As Per Photograph. Center Table Shall Have 12Mm Thick Toughened Glass With Beveled Edges And In Rectangular Shape. Another 12Mm Thick Toughened Glass Attached With Stainless Steel / Chrome Plated Metal Rods With Uv Welding And To Be Used As A Bookshelf At Bottom. Suitable Space Shall Be Provided For Visitor Chairs. All Glasses Shall Have Beveled Rounded Edges. All Work Complete Including Fabrication, Screwing, Welding, Transporting, Loading, Unloading, Placing, Finishing Etc Complete In All Due Respect As Per Technical Specifications, Directions And Satisfaction Of Engineer In Charge. , Providing, Supplying & Installation Of High Back Cushioned Leatherette Upholstered Ergonomic Chair 1.High Back Cushioned Leatherette Upholstered Revolving Ergonomic Chair. 2. Dimensions Of Chairs: A) Seat:Width 500 Mm +/- 10Mm, Depth 480Mm +/- 10Mm B) Back Rest: Width 500Mm +/- 10Mm, Height From Seat 700Mm +/- 10Mm C) Minimum Seat Height 470Mm +/- 10Mm & Maximum Seat Height 570Mm +/- 10Mm 3. Seat Shall Be Made Up Of 12 Mm Thick Hot Pressed Anti- Termite Water Resistant Plywood, Upholstered With Leatherette And Moulded Polyurethane Foam. 4. Chair Back Shall Be Made Of 12 Mm Thick Hot Pressed Anti- Termite Water Resistant Plywood, Upholstered With Leatherette And Moulded Polyurethane Foam. The Polyurethane Foam Density Shall Be 45 +/- 2Kg/M3. Chair Back Shall Be Fixed With Lumber Support & Fixed With Head Restfor Extra Support. Lumber Support (260Mm W * 150Mm H) Attached Leatherette Headrest Shall Be Supported With 2 Chrome Plated Rods Of 20Mm Thickness From Headrest To Seat Base. 5.Pu / Leatherette Padded Adjustable Handles (260 Mm W * 85Mm D) Shall Operate Through Push Button. Chair Shall Have Regular Tilt Mechanism Feature: 360-Degree Revolving Type With Single Position Locking Chrome Base Fixed With 5 Nos. Nylon Castors. 6.Chair Backrest Moulds Shall Provide Adequate Back Support, And Makes The Long Hours Of Seating Comfortable. All Work Complete Including Fabrication, Nailing, Screwing, Pasting, Transporting, Loading, Unloading, Placing, Finishing, Setting, Etc Complete In All Due Respect As Per Technical Specifications, Standards, Directions And Satisfaction Of Engineer In Charge. , Providing, Supplying & Installation Of High Back Breathable Mesh Fabric Upholstered Ergonomic Revolving Chair 1. High Back Breathable Mesh Fabric Upholstered Ergonomic Revolving Chair. 2. Dimensions Of Chairs: A) Seat:Width 500 Mm +/- 10Mm, Depth 480Mm +/- 10Mm B) Back Rest: Width 500Mm +/- 10Mm, Height From Seat 700Mm +/- 10Mm C) Minimum Seat Height 470Mm +/- 10Mm & Maximum Seat Height 570Mm +/- 10Mm 3. Seat Shall Be Made Up Of 12 Mm Thick Hot Pressed Anti- Termite Water Resistant Plywood, Upholstered With Breathable Mesh Type Fabric And Moulded Polyurethane Foam. 4. Chair Back Shall Be Made Of 40 Mm Thick Edge Of Pvc Moulding With Breathable Mesh Fabric Upholstery. The Polyurethane Foam Density Shall Be 45 +/- 2Kg/M3. Chair Back Shall Be Fixed With Lumber Support & Fixed With Head Rest For Extra Support. Lumber Support ( 260Mm W * 150Mm H )Attached Headrest Shall Be Supported With 2 Chrome Plated Rods Of 20Mm Thicknessfrom Headrest To Seat Base. 5.Pu Padded Adjustable Handles (260 Mm W * 85Mm D ) Shalloperate Through Push Button. Chair Shall Have Regular Tilt Mechanism Feature : 360 Degree Revolving Type With Single Position Locking&Chrome Base Fixed With 5 Nos. Nylon Castors . 6. Breathable Mesh Chair Backrest Moulds Shall Provide Adequate Back Support, And Makes The Long Hours Of Seating Comfortable. All Work Complete Including Fabrication, Nailing, Screwing, Pasting, Transporting, Loading, Unloading, Placing, Finishing, Setting, Etc Complete In All Respect As Per Technical Specifications, Standards, Directions And Satisfaction Of Engineer Incharge. , Providing, Supplying & Installation Of Medium Back Cushioned Leatherette Upholstered Ergonomic Revolving Chair Medium Back Chair Leatherette Chair Providing And Placing Mid Back Chair. Colour Blackthe Seat And Back Shall Be Made Up Of 1.2Cm.Thick Hot Pressed Plywood Upholstered With Pure Leatherette Of Required Color And Moulded Polyurethane Foam. Back Size: 53.0Cm(W) X 73.0Cm (H), Seat Size: 54.6Cm (W) X 49Cm (D). The High Resilience Polyurethane Foam Is Moulded With Density=45+/-2 Kg/M Cube And Hardness Load 16+/-2 Kgf As Per Is: 7888 For 25% Compression. The Seat And Back Are Arrested Together With A 9.0Cm (W) Spinemade Of 0.8Cm Thick Hr Steel. The Armrest Tube Assembly Is Made Of 2.54Cm X 0.16Cm. M.S. E.R.W. Support Tubes And Chrome Plated. The Armrest Top Is Made Of Abs & Upholstered With Foam &Leatherette . The Pedestal Is Made Of Die-Cast Aluminum With Buffing Finished. It Is Fitted With 5Nos. Twin Wheel Castors. The Pedestal Is 67.0Cm Pitch-Center Dia (77.0 Cm With Castor). The Twin Wheel Castors Are Injection Moulded In Black Nylon. All Work Complete Including Fabrication, Nailing, Screwing, Pasting, Transporting, Loading, Unloading, Placing, Finishing, Setting, Etc Complete In All Due Respect As Per Technical Specifications, Standards, Directions And Satisfaction Of Engineer Incharge. , Providing, Supplying & Installation Of Medium Back Breathable Mesh Fabric Upholstered Ergonomic Revolving Chair 1. Medium Rise Revolving Chair. 2. Dimensions Of Chairs: A) Seat:Width 500 Mm +/- 10Mm, Depth 480Mm +/- 10Mm B) Back Rest: Width 420Mm +/- 10Mm, Height From Seat 550Mm +/- 10Mm C) Minimum Seat Height 470Mm +/- 10Mm & Maximum Seat Height 570Mm +/- 10Mm 3.Seat Shall Be Made Up Of 12 Mm Thick Hot Pressed Anti- Termite Water Resistant Plywood, Upholstered With Breathable Mesh Fabric And Moulded Polyurethane Foam. The Polyurethane Foam Density Shall Be 45 +/- 2Kg/M3. 4. Chair Back Shall Be Made Of 40 Mm Thick Edge Of Pvc Moulding With Breathable Mesh Upholstery. The Seat And Back Are Arrested Together With A 9.0Cm (W) Spine Made Of 0.8Cm Thick Hr Steel. Breathable Mesh Chair Backrest Moulds Shall Provide Adequate Back Support, And Makes The Long Hours Of Seating Comfortable. 5. Pu Padded Adjustable Handles (300Mm W * 75Mm D ) Shall Operate Through Push Button. 6. Chair Shall Have Regular Tilt Mechanism Feature: 360 Degree Revolving Type With Single Position Locking&Chrome Base Fixed With 5 Nos. Nylon Castors. The Pedestal Is 67.0Cm Pitch-Center Dia (77.0 Cm With Castor). The Twin Wheel Castors Are Injection Moulded In Black Nylonall Work Complete Including Fabrication, Nailing, Screwing, Pasting, Transporting, Loading, Unloading, Placing, Finishing, Setting, Etc Complete In All Due Respect As Per Technical Specifications, Standards, Directions And Satisfaction Of Engineer Incharge. , Providing, Supplying & Installation Of Non Revolving Visitor Chair Visitor Chair Shall Be Of Dimensions (560Mm W X 670Mm D X 1020 Mm H ) Seat & Back Assembly : The Seat & Back Shall Be Made Of 12 Mm Thick Hot-Pressed Plywood Upholstered With Mesh Type Fabric Cover & Moulded Polyurethane Foam. The Polyurethane Foam Density Shall Be Of 45+/-2 Kg/M3, The Back Foam Shall Be Designed With Contour Lumber Support For Extra Cushioning, Under Structure Shall Be Of Ms Elliptical/Oblong Pipe (40X20x1mm Thick) Chrome Plated Frame. All Work Complete Including Fabrication, Nailing, Screwing, Pasting, Transporting, Loading, Unloading, Placing, Finishing, Setting, Etc Complete In All Due Respect As Per Technical Specifications, Standards, Directions And Satisfaction Of Engineer Incharge. , Providing, Supplying & Installation Of High Back Mesh Revolving Conference Chair 1. High Rise Revolving Chair. 2. High Back Chair Shall Be Of Dimensions – 500 Mm W* 500Mm D *1125Mm H Approximately 3. Seat Shall Be Made Up Of 12 Mm Thick Hot Pressed Anti- Termite Water Resistant Plywood, Upholstered With Leatherette And Moulded Polyurethane Foam. 4. Chair Back Shall Be Made Of 40 Mm Thick Edge Of Pvc Moulding With Mesh Upholstery. The Polyurethane Foam Density Shall Be 45 +/- 2Kg/M3. Chair Back Shall Be Fixed With Lumber Support & Fixed With Head Rest For Extra Support. Lumber Support ( 260Mm W * 150Mm H ) Attached Leatherette Headrest Shall Be Supported With 2 Chrome Plated Rods Of 20Mm Thicknessfrom Headrest To Seat Base. 5.Pu Padded Adjustable Handles (260 Mm W * 85Mm D ) Shalloperate Through Push Button. Chair Shall Have Regular Tilt Mechanism Feature : 360 Degree Revolving Type With Single Position Locking&Chrome Base Fixed With 5 Nos. Nylon Castors . 6. Netted Chair Backrest Moulds Shall Provide Adequate Back Support, And Makes The Long Hours Of Seating Comfortable. All Work Complete Including Fabrication, Nailing, Screwing, Pasting, Transporting, Loading, Unloading, Placing, Finishing, Setting, Etc Complete In All Due Respect As Per Technical Specifications, Standards, Directions And Satisfaction Of Engineer Incharge. , Providing, Supplying & Installation Of Medium Back Mesh Revolving Conference Halls Chair 1. Medium Rise Revolving Chair. 2. Dimensions Of Chairs: A) Seat:Width 500 Mm +/- 10Mm, Depth 480Mm +/- 10Mm B) Back Rest: Width 420Mm +/- 10Mm, Height From Seat 550Mm +/- 10Mm C) Minimum Seat Height 470Mm +/- 10Mm & Maximum Seat Height 570Mm +/- 10Mm 3.Seat Shall Be Made Up Of 12 Mm Thick Hot Pressed Anti- Termite Water Resistant Plywood, Upholstered With Mesh Fabric And Moulded Polyurethane Foam. The Polyurethane Foam Density Shall Be 45 +/- 2Kg/M3. 4. Chair Back Shall Be Made Of 40 Mm Thick Edge Of Pvc Moulding With Mesh Upholstery. The Seat And Back Are Arrested Together With A 9.0Cm (W) Spine Made Of 0.8Cm Thick Hr Steel. Netted Chair Backrest Moulds Shall Provide Adequate Back Support, And Makes The Long Hours Of Seating Comfortable. 5. Pu Padded Adjustable Handles (300Mm W * 75Mm D ) Shall Operate Through Push Button. 6. Chair Shall Have Regular Tilt Mechanism Feature: 360 Degree Revolving Type With Single Position Locking&Chrome Base Fixed With 5 Nos. Nylon Castors. The Pedestal Is 67.0Cm Pitch-Center Dia (77.0 Cm With Castor). The Twin Wheel Castors Are Injection Moulded In Black Nylonall Work Complete Including Fabrication, Nailing, Screwing, Pasting, Transporting, Loading, Unloading, Placing, Finishing, Setting, Etc Complete In All Due Respect As Per Technical Specifications, Standards, Directions And Satisfaction Of Engineer Incharge. , Providing, Supplying & Installation Of Sofa Set 02 Seater Sofa Set Providing And Placing Of Sofas With Seat Height Of 450Mm. Slab Stock Foam With Density 60+/-2Kg/M3 At Seats And Cushions. Seats And Cushion Is Also Provided With 100% Hollow Recron Fillers For Extra Comfort. Sofa Structure Consists Of Tropical 12Mm Ply Frame At The Bottom On Which S-Springs And Tie Bars Are Provided Then The Complete Structure Is Provided With Layers Of Non Woven Fabric, 2 Layers Of Slab Stock Foam 80-100Mm And Finally Recron Is Assembled Together To Form The Final Sofa. Seat And Cushions Is Upholstered With Pvc Leatherite (Shade Should Be Approved From Buyer) Upholstery, Spring Assembly Of 4Mm Dia Is Mounted In Understructure For Support And Additonal Cushioning Purpose. Legs Shall Be Provided Made Of Stainless Steel (Grade Ss 202). It Is A Welded Assembly Made By The Combination Of Tube Andplate.All Work Complete Including Fabrication, Nailing, Screwing, Pasting, Transporting, Loading, Unloading, Placing, Finishing, Setting, Etc Complete In All Due Respect As Per Technical Specifications, Standards, Directions And Satisfaction Of Engineer Incharge. , Providing, Supplying & Installation Of Sofa Set 03 Seater Sofa Set Providing And Placing Of Sofas With Seat Height Of 450Mm. Slab Stock Foam With Density 60+/-2Kg/M3 At Seats And Cushions. Seats And Cushion Is Also Provided With 100% Hollow Recron Fillers For Extra Comfort. Sofa Structure Consists Of Tropical 12Mm Ply Frame At The Bottom On Which S-Springs And Tie Bars Are Provided Then The Complete Structure Is Provided With Layers Of Non Woven Fabric, 2 Layers Of Slab Stock Foam 80-100Mm And Finally Recron Is Assembled Together To Form The Final Sofa. Seat And Cushions Is Upholstered With Pvc Leatherite (Shade Should Be Approved From Buyer) Upholstery, Spring Assembly Of 4Mm Dia Is Mounted In Understructure For Support And Additonal Cushioning Purpose. Legs Shall Be Provided Made Of Stainless Steel (Grade Ss 202). It Is A Welded Assembly Made By The Combination Of Tube Andplate. All Work Complete Including Fabrication, Nailing, Screwing, Pasting, Transporting, Loading, Unloading, Placing, Finishing, Setting, Etc Complete In All Due Respect As Per Technical Specifications, Standards, Directions And Satisfaction Of Engineer Incharge. , Providing, Supplying & Installation Of Conference Table Conference Table Shall Be Made Up Of 18Mm Thick Isi Marked Water Proof, Termite Proof, Borer Free Plywood With 1.00Mm Thick Decorative Laminates On All The Surfaces. The Front Modesty Of The Conference Table Shall Be Made Up Of 18Mm Thick Plywood Covered With 1.00 Mm Thick Decorative Laminates, Connection Of Top With Leg (90 Degree * 690 Mm). While The Thickness Of The Side Panels Of Standard Tables Shall Be 18Mm And It Is 25Mm In Case Of Standard Table With Accessories The Side Panels Shall Be Covered With 1.00Mm Thick Decorative Laminates. The Edges Shall Be Pasted With 2Nd Class Teak Wood Bidding. The Table Legs Or Support Shall Have Shoes Cum Levelers At The Bottom Of The Side Panels. The Top Shall Be Made Up Of 18Mm Thick Plywood Covered With Decorative Laminates On Top & Bottom, The Width Of Table In Plan Shall Be 700Mm. Worktops Of The The Table Shall Have Provision For Cable Managers On Both The Sides, Through Which The Computer Cables And Other Telecommunication Cables Can Pass Through And Run From The Bottom Of The Table To The Top. These Connection Tops Shall Be Joined Using Chrome Plated Metal Legs, Which Provide Strength To The Tops. They Shall Be Painted And Not Laminated So Their Edges Are Similar To That Of The Standard Tables, Which Provides Symmetry To The Entire Setup. Electrical & Other Accessories Arrangements. The Table Shall Have Proper Concealled Provisions For Accommodating Power, Telephone, Lan, Audio & Video Cables, Ports For Electric, Lan, Monitors, Pbax, Printers Etc. Of Approved Make And Requirements. The Conference Table Shall Be Properly Designed To Accomodate The Legs And Chairs. The Conference Tables Will Be Constructed For Different Hall Of Different Capacity. All Work Complete Including Fabrication, Nailing, Screwing, Pasting, Transporting, Loading, Unloading, Placing, Finishing, Setting, Etc Complete In All Due Respect As Per Technical Specifications, Standards, Directions And Satisfaction Of Engineer Incharge. , Providing, Supplying & Installation Of Three Seater Bench Legs & Armrest Shall Be Ss With 1.2Mm Thickness. Seat & Back Shall Be 1.6Mm Ss Perforated Sheet The Side Bar Shall Be Made Up Of Solid Steel 30X12mm With Plastic Inserts. The Cross Beam Shall Be Made Up Of Powder Coated Rectangular Mserw Tube Having 80X40x2mm (+/-2Mm). The Sheet Shall Be Assembled On Cross Beam With The Help Of M8 Bolts (Per Seat -8Nosi.E Seat To Bracket & 4Nos Bracket To Cross Beam). Overall Dimension Shall Be:- Seat Height - 410Mm & Total Height 710Mm, Width& Depth As Measured From Pedestal I.E Width - 1600Mm & Depth 560Mm With Tolerance Of +/-0.05%. All Work Complete Including Fabrication, Nailing, Screwing, Pasting, Transporting, Loading, Unloading, Placing, Finishing, Setting, Etc Complete In All Due Respect As Per Technical Specifications, Standards, Directions And Satisfaction Of Engineer Incharge. , Storage: Storage Size- 750(H)X400(D)The Top Made Up Of 18Mm Thick Isi Marked Water Proof, Termite Proof, Borer Free Plywoodwith 1Mm Thick Lamination And All Non-Exposed Surface Should Be Covered By 0.6Mm Thick White Balancing Laminate. All Edges Must Be Sealed With 2Mm Thick Pvc Edge-Bend. All The Pvc Edge Beading Should Have Press Through 200° Temperature Hot Melt Glue By Automatic Through Feed Edge Banding Machine With Corner Rounding Function Machine. The Side And Modesty Is Made Of 18Mm Thick Commercial Plywood With 1Mm Thick Lamination And All Non-Exposed Surface Should Be Covered By 0.6Mm Thick White Balancing Laminate. All Edges Must Be Sealed With 2Mm Thick Pvc Edge-Bend. All The Pvc Edge Beading Should Have Press Through 200° Temperature Hot Melt Glue By Automatic Through Feed Edge Banding Machine With Corner Rounding Function Machine.All Profile I.E. Shutter, Shelf, Skirting Shall Be Made From18mm Thick Commercial Plywood With 1Mm Thick Lamination And All Non-Exposed Surface Should Be Covered By 0.6Mm Thick White Balancing Laminate.All Edges Must Be Sealed With 2Mm Thick Pvc Edge-Bend. All The Pvc Edge Beading Should Have Press Through 200° Temperature Hot Melt Glue By Automatic Through Feed Edge Banding Machine With Corner Rounding Function Machine. It Shall Have 2 Shutter With Hinges. The Shutter Shall Be Operated By Ss Handle. There Shall Be Buffers Provided At The Bottom To Avoid Scratches On The Floor. The Manufacturing Unit Should Be Iso 9001:2015, 14001:2015, 45001: 2018 & 50001:2018, Certified. All Iso Certificates Should Be Issued By National Accreditation Board For Certification Bodies (Nabcb)/ Quality Council Of India (Qci) (An Autonomous Body Set Up By Ministry Of Commerce And Industry) Authorized Agency. All As Per The Layout. All Work Including Placing & Fixing Complete In All Respect As Per Technical Specification, As Per Approval & Directions Of Engineer In-Charge. , Providing, Supplying & Installation Of Metal Almirah Steel Storage Almirah Providing And Placing Metal Storage. The Overall Approximate Size Of The Storage Shall Be 900Mm (W) X 450Mm (D) X 2000Mm (H). The Construction Shall Be Knock Downconstruction With 1Mm Thick Crca For Shelf And 1Mm Thick For Back. The Door Shall Be Made Of 1Mm Thick Crca And All Other Metal Component Shall Be Made Of 1Mm Thick Crca. The Locking And Handle Of The Storage Shall Be Mazak Handle With Three Way Locking Mechanism. The Almirah Should Have 2 Welded Legs Of 75Mm Width And 125Mm Heightmade Up Of 1Mm Thicksheet Which Acts As A Understructure Of The Storage. The Shelving Shall Be Height Adjustable And Shall Have A Load Capacity Of 40Kg. The Product Shall Be Epoxy Powder Coated To The Thickness Of 50 Microns As Per Sketch For Item. All Work Complete Including Fabrication, Nailing, Screwing, Pasting, Transporting, Loading, Unloading, Placing, Finishing, Setting, Etc Complete In All Due Respect As Per Technical Specifications, Standards, Directions And Satisfaction Of Engineer Incharge. , Optimizer/Compactor: Providing And Placing Optimizer/Compator As Per Layout. Overall Dimensions Of Single Static Unit (U/C + Fittings + Cover) Shall Be 915Mm(W)X457mm(D)X2080mm(H), Single Static Drive Unit (U/C + Fittings + Cover) Shall Be 915Mm(W)X457mm(D)X2080mm(H) And Twin Mobile Static Drive Unit (U/C + Fittings + Cover) Shall Be 915Mm(W)X 914 Mm(D)X2080mm(H). The Construction Shall Be Rigid Knock Down Made Out Of 0.8 Thick Crca Steel. Each Body Shall Have A Main Unit Plus Add On Units (1,2,3,4). Shelf Construction Shall Be Made From Crca Steel 0.8 Mm Thick. Uniformly Distributed Load Capacity Of 60 Kg. Undercarriage Shall Have Construction In Welded Frame Made Of Hr Sheet 3.15 Mm Thick. Cutting Of Sheet Should Be Done On Nc Operated Machine To Ensure Accuracy Ofcutting And Bending Of Sheet Should Be Done On Cnc Operated Machine To Ensureaccuracy Of Bending.Finish Shall Be Epoxy- Polyester Powder Coat Of Approved Color & Shade. The Movements Shall Be Drive Type Configuration: In Case Of D2 & D3 Movement Of Units Is Achieved Mechanically Through A Pu Drive Wheel And Sprocket -Chain-Tensioner Arrangement Mounted Rigidly Onto Body Size. For D3 Each Movable Undercarriage Shall Be Provided With 2 Rollers On The Shaft For Driving, 2 Antifriction Ball Bearing For Rolling And 4 Antifriction Ball Bearing For Guiding Between Rail. Fittings Shall Be Centralized Locking Arrangement Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. The Recess Handle Lock Is Placed At Suitable Height. This Arrangement Occupies A Space Of 90.0 Mm. When The Last Unit Is Twin Movable Hinged Doors Are Provided For The End Bodies, So In This Case Locking Stiffener Is Mounted Onto Drive Unit Cover And With Tile Fascia Option It Will Be Mounted In The Recess Vertical. Each Type Have Knob Near Drive Wheel Manual Of Trim Drive Units Shall Locking The For Locking Of Individual Units When A Person Is Using Those Units. Knob Shall Be Rotated To Unlock Position When Units Are To Be Moved. End Stoppers Shall Be Provided To Prevent Derailment. Door Locking Shall Be Having Hinged Doors Of Recessed Die Cast Handle Cum Lock Giving 3 Way Locking Through A Lever & Shooting Bolts. Guide Channels Shall Have J Section 2 Mm Thick Hr & 25 Mm Square Bright Bar. Fasteners Shall Be Galvanized/Blackodized/Zn Plated. The Label Holder Shall Be Made From 2 Mm Thick Clear Transparent Acrylic Sheet. Guide Channels Shall Consist Of J Section 2 Mm Thick & 25 Mm Square Bright Bar - Both Connected By Screws. Prior To The Embedding Of The Guide Channels With The Help Of Screw. All The Metal Parts Have Free From The Dent, Burrs And Sharp Edges. Removing Of Grease, Rust Should Be Done Before Powder Coating. The Metal Parts Material Is Then Oven Baked With A Controlled Temperature Of 180 Deg. C To 200 Deg. Minimum Thickness Of Powder Coated Should Be 40-50 Microns.The Manufacturing Unit Should Be Iso 9001:2015, 14001:2015, 45001: 2018 & 50001:2018, Certified. All Iso Certificates Should Be Issued By National Accreditation Board For Certification Bodies (Nabcb)/ Quality Council Of India (Qci) (An Autonomous Body Set Up By Ministry Of Commerce And Industry) Authorized Agency. All As Per The Layout. All Work Including Placing & Fixing Complete In All Respect As Per Technical Specification, As Per Approval & Directions Of Engineer In-Charge. 2 Bay Singlestatic Drive Unit , Optimizer/Compactor: Providing And Placing Optimizer/Compator As Per Layout. Overall Dimensions Of Single Static Unit (U/C + Fittings + Cover) Shall Be 915Mm(W)X457mm(D)X2080mm(H), Single Static Drive Unit (U/C + Fittings + Cover) Shall Be 915Mm(W)X457mm(D)X2080mm(H) And Twin Mobile Static Drive Unit (U/C + Fittings + Cover) Shall Be 915Mm(W)X 914 Mm(D)X2080mm(H). The Construction Shall Be Rigid Knock Down Made Out Of 0.8 Thick Crca Steel. Each Body Shall Have A Main Unit Plus Add On Units (1,2,3,4). Shelf Construction Shall Be Made From Crca Steel 0.8 Mm Thick. Uniformly Distributed Load Capacity Of 60 Kg. Undercarriage Shall Have Construction In Welded Frame Made Of Hr Sheet 3.15 Mm Thick. Cutting Of Sheet Should Be Done On Nc Operated Machine To Ensure Accuracy Ofcutting And Bending Of Sheet Should Be Done On Cnc Operated Machine To Ensureaccuracy Of Bending.Finish Shall Be Epoxy- Polyester Powder Coat Of Approved Color & Shade. The Movements Shall Be Drive Type Configuration: In Case Of D2 & D3 Movement Of Units Is Achieved Mechanically Through A Pu Drive Wheel And Sprocket -Chain-Tensioner Arrangement Mounted Rigidly Onto Body Size. For D3 Each Movable Undercarriage Shall Be Provided With 2 Rollers On The Shaft For Driving, 2 Antifriction Ball Bearing For Rolling And 4 Antifriction Ball Bearing For Guiding Between Rail. Fittings Shall Be Centralized Locking Arrangement Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. The Recess Handle Lock Is Placed At Suitable Height. This Arrangement Occupies A Space Of 90.0 Mm. When The Last Unit Is Twin Movable Hinged Doors Are Provided For The End Bodies, So In This Case Locking Stiffener Is Mounted Onto Drive Unit Cover And With Tile Fascia Option It Will Be Mounted In The Recess Vertical. Each Type Have Knob Near Drive Wheel Manual Of Trim Drive Units Shall Locking The For Locking Of Individual Units When A Person Is Using Those Units. Knob Shall Be Rotated To Unlock Position When Units Are To Be Moved. End Stoppers Shall Be Provided To Prevent Derailment. Door Locking Shall Be Having Hinged Doors Of Recessed Die Cast Handle Cum Lock Giving 3 Way Locking Through A Lever & Shooting Bolts. Guide Channels Shall Have J Section 2 Mm Thick Hr & 25 Mm Square Bright Bar. Fasteners Shall Be Galvanized/Blackodized/Zn Plated. The Label Holder Shall Be Made From 2 Mm Thick Clear Transparent Acrylic Sheet. Guide Channels Shall Consist Of J Section 2 Mm Thick & 25 Mm Square Bright Bar - Both Connected By Screws. Prior To The Embedding Of The Guide Channels With The Help Of Screw. All The Metal Parts Have Free From The Dent, Burrs And Sharp Edges. Removing Of Grease, Rust Should Be Done Before Powder Coating. The Metal Parts Material Is Then Oven Baked With A Controlled Temperature Of 180 Deg. C To 200 Deg. Minimum Thickness Of Powder Coated Should Be 40-50 Microns.The Manufacturing Unit Should Be Iso 9001:2015, 14001:2015, 45001: 2018 & 50001:2018, Certified. All Iso Certificates Should Be Issued By National Accreditation Board For Certification Bodies (Nabcb)/ Quality Council Of India (Qci) (An Autonomous Body Set Up By Ministry Of Commerce And Industry) Authorized Agency. All As Per The Layout. All Work Including Placing & Fixing Complete In All Respect As Per Technical Specification, As Per Approval & Directions Of Engineer In-Charge. 2 Bay Twin Mobile Static Drive Unit , Optimizer/Compactor: Providing And Placing Optimizer/Compator As Per Layout. Overall Dimensions Of Single Static Unit (U/C + Fittings + Cover) Shall Be 915Mm(W)X457mm(D)X2080mm(H), Single Static Drive Unit (U/C + Fittings + Cover) Shall Be 915Mm(W)X457mm(D)X2080mm(H) And Twin Mobile Static Drive Unit (U/C + Fittings + Cover) Shall Be 915Mm(W)X 914 Mm(D)X2080mm(H). The Construction Shall Be Rigid Knock Down Made Out Of 0.8 Thick Crca Steel. Each Body Shall Have A Main Unit Plus Add On Units (1,2,3,4). Shelf Construction Shall Be Made From Crca Steel 0.8 Mm Thick. Uniformly Distributed Load Capacity Of 60 Kg. Undercarriage Shall Have Construction In Welded Frame Made Of Hr Sheet 3.15 Mm Thick. Cutting Of Sheet Should Be Done On Nc Operated Machine To Ensure Accuracy Ofcutting And Bending Of Sheet Should Be Done On Cnc Operated Machine To Ensureaccuracy Of Bending.Finish Shall Be Epoxy- Polyester Powder Coat Of Approved Color & Shade. The Movements Shall Be Drive Type Configuration: In Case Of D2 & D3 Movement Of Units Is Achieved Mechanically Through A Pu Drive Wheel And Sprocket -Chain-Tensioner Arrangement Mounted Rigidly Onto Body Size. For D3 Each Movable Undercarriage Shall Be Provided With 2 Rollers On The Shaft For Driving, 2 Antifriction Ball Bearing For Rolling And 4 Antifriction Ball Bearing For Guiding Between Rail. Fittings Shall Be Centralized Locking Arrangement Through Locking Stiffener Mounted Onto Back Of Single Last Unit So That It Gets Locked On Channels When All The Units Are Brought Together. The Recess Handle Lock Is Placed At Suitable Height. This Arrangement Occupies A Space Of 90.0 Mm. When The Last Unit Is Twin Movable Hinged Doors Are Provided For The End Bodies, So In This Case Locking Stiffener Is Mounted Onto Drive Unit Cover And With Tile Fascia Option It Will Be Mounted In The Recess Vertical. Each Type Have Knob Near Drive Wheel Manual Of Trim Drive Units Shall Locking The For Locking Of Individual Units When A Person Is Using Those Units. Knob Shall Be Rotated To Unlock Position When Units Are To Be Moved. End Stoppers Shall Be Provided To Prevent Derailment. Door Locking Shall Be Having Hinged Doors Of Recessed Die Cast Handle Cum Lock Giving 3 Way Locking Through A Lever & Shooting Bolts. Guide Channels Shall Have J Section 2 Mm Thick Hr & 25 Mm Square Bright Bar. Fasteners Shall Be Galvanized/Blackodized/Zn Plated. The Label Holder Shall Be Made From 2 Mm Thick Clear Transparent Acrylic Sheet. Guide Channels Shall Consist Of J Section 2 Mm Thick & 25 Mm Square Bright Bar - Both Connected By Screws. Prior To The Embedding Of The Guide Channels With The Help Of Screw. All The Metal Parts Have Free From The Dent, Burrs And Sharp Edges. Removing Of Grease, Rust Should Be Done Before Powder Coating. The Metal Parts Material Is Then Oven Baked With A Controlled Temperature Of 180 Deg. C To 200 Deg. Minimum Thickness Of Powder Coated Should Be 40-50 Microns.The Manufacturing Unit Should Be Iso 9001:2015, 14001:2015, 45001: 2018 & 50001:2018, Certified. All Iso Certificates Should Be Issued By National Accreditation Board For Certification Bodies (Nabcb)/ Quality Council Of India (Qci) (An Autonomous Body Set Up By Ministry Of Commerce And Industry) Authorized Agency. All As Per The Layout. All Work Including Placing & Fixing Complete In All Respect As Per Technical Specification, As Per Approval & Directions Of Engineer In-Charge.2 Bay Single Static Unit , Providing & Fixing Bwr Isi Marked 19 Mm Board Of Approved Make For Making Wardrobe/Shelves And Other Furniturewith Fevicol & Nails Completeas Per Approved By Engineer In Charge. , Providing & Fixing Commercial Ply As Per Is 710 : 1976 Bwr Of Approved Make For Making Wardrobe/Shelves And Other Furniturewith Fevicol & Nails Completeas Per Approved By Engineer In Charge. 12 Mm Thick , Providing & Fixing Telescopic Channel Of Approved Make For Drawers With Screws Completeas Per Approved By Engineer In Charge. 400Mm Long , Providing & Fixing Drawer Handle Of Approved Make For Drawers With Screws Completeas Per Approved By Engineer In Charge. 100Mm Long , Providing & Fixing Drawer Lock Of Approved Make For Drawers With Screws Completeas Per Approved By Engineer In Charge. , Providing And Fixing Wall Panelling Using Soft Wood Frame Of Size 50X25mm @600 Mm C/C In Both Directions Duly Treated With Anti-Termite Treatment Making Grooves Painting Of Grooves Specification And Drawing Using :12 Mm Thick One Side Laminated Board Practical Board (Phenol Bonded) , Supplying And Fixing Wood Work In Frames Of Wall Panelling, False Ceiling Partition Wall Etc. As Per Approved Design And Drawing Including Antitermite Treatment. Hollock Wood Grade - I. , Add Extra In Frames For Circular Members Such As In Fan Lights, Staircase Railing Etc. , Providing & Fixing Mica Of Approved Make For Inner/Outer Side Of Shutters With Fevicol & Nails Completeas Per Approved By Engineer In Charge. 0.8Mm Thick Mica
