Tender For Renovation Work At Sub Division Deogarh, Rajsamand. - Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding NOld work (one or more coats) including scrapping surface and necessary repairs. (a) Colour Change r 3 Applying one coat of Cement primer of approved brand and manufacture on wall surface including all scaffolding: 4 Painting exterior surface of wall with 100% acryic exterrior paint of approved brandand manufacture to give an even shade with two or more coats includingprepartion of base with sand parering prime putty etc complete in all respect old work 5 Painting with enamel paint of approved brand and manufacture to give an even shade : One or more coats on old work. 6 Painting with enamel paint of app brand and manufacturer to give an even shade two ro more coat on new work 7 Plaster on new surface on walls in cement sand mortar 1 : 6 including raking of joints etc. complete fine finished : 20 mm thick 8 P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 ofpproved make in all colour and shade, laid with 20 mm thick CM 1 : 4 includinggrounting the joints with white cement and matching pigment etc complete.size 600 mm X 600 mm 9 Add extra for Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477 , using 5kg. adhesive per sqm of tile area, in average 3mmthickness instead of cement mortar. 10 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, making of lines or groove etc complete but excluding the cost of nosing of steps etc. complete. 75mm thick with 20mm thick nominal size aggregate 11 Labour charges for repair to door / window without using any material such as applying randha (finishing) tightening of bolts& screw etc 12 Providing and Fixing2nd ist quality standard white/ivory, grey, fuma red brown, light green, light blue and other light shades glazed tiles of ISI marked (IS:13753) of size 300 mm x 200 mm in walls, floors, steps, pillars etc. laid on a bed of neat cementslurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster on walls & pillar): 13 Providing and fixing iind quality MAT finished ceremic tiles size 300x300 mm confirming to IS 13753 colour such as white, grey, lvory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder (untile or roffe make)and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortar bed 1:4). 20mm thick 14 Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth completeNew Plastered Surface (three or more coats) 15 Renewing glass panes, with putty and nails whenever necessary : Float glass panes of thickness 4 mm 16 Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete: 20mm 17 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete: 18 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M20 grade Nominal Mix1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone 19 Kota stone slab flooring 25 mm thick over 20 mm (average)thick base laid over and jointed with grey cement slurrymixed with pigment to match the shade of the slab includingrubbing and polishing complete with base of cement mortar 1: 4 (1 cement : 4 coarse sand)For area of each slab from 2001 to 5000 Sq.Cm 20 Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, boltsand nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape whenever required0.80 mm thick with zinc coating not less than 275 gm/m2 21 Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast andfittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide Kg. 96.009.8.1 Extra if square,rectangular hollow tubelar sections are used or grill made by flats only 22 Providing & fixing external grade board solid core single lef flush door shutters ISI 2200-67 mark using phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure ‘A’Decorative teak veneer One side 23 Providing and fixing T-iron frames for doors windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs: 10 cm long embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20 mm nominal size)or with wooden plugs and screw or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 24 Random Rubble stone masonry with hard stone insuperstructure above plinth level and upto five level above30cm. thick walls in Cement Mortar 1:6 ( 1-Cement : 6-Sand): 25 Half brick masonry in Superstructure , above plinth level uptofloor V level using bricks of designation 75Cement mortar 1 : 6 (1 cement : 6 coarse sand) 26 Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soil 27 Providingand laying in position cement conrete including curing compaction etc. Complete in specified grade excluding the cost of centering and shuttering. All work up to plinth level1:4:8 (1 cement: 4 coarse sand:8 graded stone aggregate 40 mm nominal size) 28 Random Rubble stone masonry for foundation and plinth in Cement Sand mortar above 30CM thick wall in: Cement Mortar 1:6 ( 1-Cement : 6-Sand). 29 Providing and fixing M.S. sheet 1mm thick single leaf doorshutter in angle iron frame 35x35x5mm suitabilly diagonallybraced with 25x3mm flat iron above and below lock rail ofsize 50x5mm beading extra including all fittings, as perdirection of Engg. incharge but excluding cost of chowkhats:including two coats of anit-corrosive red oxide primer paint 30 Providing and fixing of double leaf steel shutter for cupboard, the frame is made of pressed steel ISI section 80x25 mmx1.25 mm thick with 1.00 mm MS sheet to spot welded including holdfasts of 15x3mm, MS oxidized fittings such as butt hinges, sliding doors bolts, handles, tower bolts and twinpeg etc complete including applying priming coat of approved steel primer of red oxide zinc chromate and spray painting inapproved shade with deco paint of approved quality complete as per direction of Engineer In Charge 31 Repairofdoor,windowshuttersincludingcostofmaterialandlabourforchangeofdamaged :Panel by Shuttering Ply - 9mm thick (Commercial) 32 Repairofdoor,windowshuttersincludingcostofmaterialandlabourforchangeofdamaged :Panel by Wire Gauge 14 mesh x 24 gauge 33 Repairofdoor,windowshuttersincludingcostofmaterialandlabourforchangeofdamaged :Panel by Plain Glass Panes 4mm thick 34 Repairofdoor,windowshuttersincludingcostofmaterialandlabourforchangeofdamaged :Aldrop of mild Steel12 long x12mm dia 35 Repairofdoor,windowshuttersincludingcostofmaterialandlabourforchangeofdamaged :Stopper of Aluminium with Double Rubber Gutka 36 Supplying and fixing in walls machine cut and polished stone shelves, tands andin CM 1:3 with machine cut edges :Kota stone minimum 30mm thick. 37 Supplying and fixing fixed wire gauge of 14 mesh x 24 gaugeto the metal frame of rolled section by metal beading 20x3mmwith suitable screw at not exceeding 150mm distance 38 Patch repair to cement concrete floor including digging out old floor in regular shape and removal of rubbish curing etc. complete in all respects. 39 Removal and refixing stone chhajja 50 to 75 mm thick including finishing, complete in all respects. 40 Repair to stone masonary in cement sand mortar 1:6 with old and new stone. 41 Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster incl. disposal of rubbish to the dumping ground within 50mtr lead 42 Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge:In cement mortar. 43 Providing and fixing bright finished Mortice lock of approved make Godrej or equivalent with pair of CP handles for doors with necessary screws etc complete (Best make of approved quality) as per direction of Engineer-in-charge. 44 Providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS 2095- Part I at all height false ceiling including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting.
