Renovation Work At Sub Division Khamnore, Rajsamand. - Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding NOld work (one or more coats) including scrapping surface and necessary repairs. (a) Colour Change r 3 Applying one coat of Cement primer of approved brand and manufacture on wall surface including all scaffolding: 4 Painting exterior surface of wall with 100% acryic exterrior paint of approved brandand manufacture to give an even shade with two or more coats includingprepartion of base with sand parering prime putty etc complete in all respect New work 5 Painting with enamel paint of approved brand and manufacture to give an even shade : One or more coats on old work. 6 Painting with enamel paint of app brand and manufacturer to give an even shade two ro more coat on new work 7 Plaster on new surface on walls in cement sand mortar 1 : 6 including raking of joints etc. complete fine finished : 20 mm thick 8 P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 ofpproved make in all colour and shade, laid with 20 mm thick CM 1 : 4 includinggrounting the joints with white cement and matching pigment etc complete.size 600 mm X 600 mm 9 Add extra for Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477 , using 5kg. adhesive per sqm of tile area, in average 3mmthickness instead of cement mortar. 10 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, making of lines or groove etc complete but excluding the cost of nosing of steps etc. complete. 75mm thick with 20mm thick nominal size aggregate 11 Labour charges for repair to door / window without using any material such as applying randha (finishing) tightening of bolts& screw etc 12 Providing and Fixing2nd ist quality standard white/ivory, grey, fuma red brown, light green, light blue and other light shades glazed tiles of ISI marked (IS:13753) of size 300 mm x 200 mm in walls, floors, steps, pillars etc. laid on a bed of neat cementslurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster on walls & pillar): Category - A kajaria, jhonson, somnani make etc. 13 Providing and fixing iind quality MAT finished ceremic tiles size 300x300 mm confirming to IS 13753 colour such as white, grey, lvory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder (untile or roffe make)and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortar bed 1:4). 20mm thick 14 Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete New Plastered Surface (three or more coats) 15 Renewing glass panes, with putty and nails whenever necessary : Float glass panes of thickness 4 mm 16 Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete: 20mm 17 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete: 18 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M20 grade Nominal Mix1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone 19 Kota stone slab flooring 25 mm thick over 20 mm (average)thick base laid over and jointed with grey cement slurrymixed with pigment to match the shade of the slab includingrubbing and polishing complete with base of cement mortar 1: 4 (1 cement : 4 coarse sand)For area of each slab from 2001 to 5000 Sq.Cm 20 Random Rubble stone masonry with hard stone insuperstructure above plinth level and upto five level above30cm. thick walls in Cement Mortar 1:6 ( 1-Cement : 6-Sand): 21 Half brick masonry in Superstructure , above plinth level uptofloor V level using bricks of designation 75Cement mortar 1 : 6 (1 cement : 6 coarse sand) 22 Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soil 23 Providingand laying in position cement conrete including curing compaction etc. Complete in specified grade excluding the cost of centering and shuttering. All work up to plinth level1:4:8 (1 cement: 4 coarse sand:8 graded stone aggregate 40 mm nominal size) 24 Random Rubble stone masonry for foundation and plinth in Cement Sand mortar above 30CM thick wall in: Cement Mortar 1:6 ( 1-Cement : 6-Sand). 25 Providing and fixing of double leaf steel shutter for cupboard, the frame is made of pressed steel ISI section 80x25 mmx1.25 mm thick with 1.00 mm MS sheet to spot welded including holdfasts of 15x3mm, MS oxidized fittings such as butt hinges, sliding doors bolts, handles, tower bolts and twinpeg etc complete including applying priming coat of approved steel primer of red oxide zinc chromate and spray painting inapproved shade with deco paint of approved quality complete as per direction of Engineer In Charge 26 Repairofdoor,windowshuttersincludingcostofmaterialandlabourforchangeofdamaged :Panel by Shuttering Ply - 9mm thick (Commercial) 27 Repairofdoor,windowshuttersincludingcostofmaterialandlabourforchangeofdamaged :Panel by Wire Gauge 14 mesh x 24 gauge 28 Repairofdoor,windowshuttersincludingcostofmaterialandlabourforchangeofdamaged :Panel by Plain Glass Panes 4mm thick 29 Repairofdoor,windowshuttersincludingcostofmaterialandlabourforchangeofdamaged :Aldrop of mild Steel12 long x12mm dia 30 Repairofdoor,windowshuttersincludingcostofmaterialandlabourforchangeofdamaged :Stopper of Aluminium with Double Rubber Gutka 31 Providing and fixing welded mesh/expanded metal mesh in frame work, flat iron beading 20x3mm including top cross laps inside and out sides welding, iron bolts, crews, clips etc. complete (excluding frame work) of sizeWelded mesh 50 mmx 50 mm x 2.1 mm. 32 Supplying and fixing in walls machine cut and polished stone shelves, tands andin CM 1:3 with machine cut edges :Kota stone minimum 30mm thick. 33 Providing and fixing T-iron frames for doors windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs: 10 cm long embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20 mm nominal size)or with wooden plugs and screw or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 34 Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (IS 1038- 1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer,excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required :Windows side hung /Ventilators top or centre hung (openable)Deduct for Pin headed 4mm thick glass panels is used insteadof 4mm thick plain glass 35 Supplying and fixing fixed wire gauge of 14 mesh x 24 gaugeto the metal frame of rolled section by metal beading 20x3mmwith suitable screw at not exceeding 150mm distance 36 Providing and fixing Square bars or other flat welded to window, ventilatiors etc. 37 Providing and fixing M.S. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint Add extra for double leaf shutters 38 Finishing with neat cement (punning). 39 Patch repair to cement concrete floor including digging out old floor in regular shape and removal of rubbish curing etc. complete in all respects. 40 Removal and refixing stone chhajja 50 to 75 mm thick including finishing, complete in all respects. 41 Repair to stone masonary in cement sand mortar 1:6 with old and new stone. 42 Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster incl. disposal of rubbish to the dumping ground within 50mtr lead 43 Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge:In cement mortar. 44 Making holes in stone masonry wall upto 450 mm x450 mm size and making good in CM 1:6. 45 Providing and fixing bright finished Mortice lock of approved make Godrej or equivalent with pair of CP handles for doors with necessary screws etc complete (Best make of approved quality) as per direction of Engineer-in-charge. 46 Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges :Sand or other approved stone 50mm thick. 47 Providing & fixing external grade board solid core single lef flush door shutters ISI 2200-67 mark using phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 30 mm thick .Commercial Veneer both side 48 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 49 Providing and fixing horizontal chajja of Red/ White sand stone 40 mm thick and upto 80 cm projection in cement mortar 1:4 (1 cement : 4 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade.
