|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 2 | M&L for vitrified ceramic coloured tiles, 10mm thick(Square/rectangular) polished, \"light shade\", area of each tile not exceeding 0.36 sqm, as in floor, etc., set and jointed in neat cement slurry and pointed in white or colured cement to match with the tile laid, over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. |
| 3 | M&L for vitrified ceramic tiles, 10mm thick (Square/rectangular), polished, light shade or any shade, area of each tile not exceeding 0.36 sqm, as in dado/skirting, etc., set and jointed in neat cement slurry and pointed in white or colured cement to match the surfaces of tiles, over and including 10mm thick screed bed in cement mortar (1:4) complete all as specified and as directed. |
| 4 | M&L for non skid ceramic coloured tiles of size 7 to 8mm thick (Square/rectangular), area of each tile exceeding 0.6 sqm but not exceeding 0.11 sqm, in floors, etc., set and jointed in neat cement slurry and pointed in white or colured cement to match with the tiles, laid over and including 15mm thick screed bedding layer in cement mortar (1:6) complete all as specified and as directed. |
| 5 | M&L for glazed ceramic coloured tiles fixed as on vertical surfaces, such as dado/skirting, etc., of size 450x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles, laid over and including 10mm thick backing coat in cement mortar (1:4) complete all as specified and as directed. |
| 6 | Demolition of cement concrete (unreinforced) in ground floors or pavings not exc. 15cm thickness (below or above ground level) complete all as specified and as directed. |
| 7 | M&L for 40mm thick plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as on flooring, finished even and smooth without using extra cement complete all as specified and as directed. |
| 8 | Dismantling of stone slab and tiles of any description or thickness in floors, footpath, aprons or in shelves, platform, etc. bedded and pointed in any mortar complete all as specified and as directed. |
| 9 | M&L for granite slab 18 to 20mm thick, machine cut bedded and jointed with grey cement and pointed and adhesive of pigment to match the shade including cutting with polishing, laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and as directed. |
| 10 | Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar complete all as specified and as directed. |
| 11 | M&Lfor brick work in one brick thick wall with sub-class ‘B’ bricks, straight or curved on plan exc. 6m mean radius built in cement mortar (1:4) complete all as specified and as directed. |
| 12 | Taking down chowkat or frame with shutter (without taking off shutters from the frame) of area n. exc. 1.5 Sqm each complete all as specified and as directed. |
| 13 | All as per Serial item No. 12 here-in-before but area exc. 1.5 sqm and not exc. 4 sqm each. |
| 14 | Taking down shutters of any description, area exc. 1 sqm but n. exc. 2 sqm each complete all as specified and as directed. |
| 15 | All as per Serial item No. 14 here-in-before but area not exc. 2 Sqm each. |
| 16 | Re-fixing shutters in same opening including taking down, easing and adjusting of any description of area exc. 1.00 sqm but n. exc. 2 sqm each complete all as specified and as directed. |
| 17 | Re-fixing shutters in same opening including taking down, easing and adjusting of any description of area n. exc. 1.00 sqm each complete all as specified and as directed. |
| 18 | M&L for resecuring or easing and adjusting without taking down of shutters of any description, area n. exc. 1.00 sqm each complete all as specified and as directed. |
| 19 | M&L for resecuring or easing and adjusting without taking down of shutters of any description of area exc. 1.0 sqm but n. exc. 2 sqm each complete all as specified and as directed. |
| 20 | Dismantling timber scantling, 40 sq.cm and over in section, in any position, in unframed work complete all as specified and as directed. |
| 21 | M&L for 2nd class hard wood plain, solid, straight, chowkhat and framed, wrought, rebated on the solid, rounded or chamfered, put together with pinned at joints complete all as specified and as directed |
| 22 | S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 23 | S&F 35mm thick 2nd class hard wood, factory made, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I, Section 8, Clause 8.24 (a); and fitted to chowkats complete all as per specified and as directed. |
| 24 | S&F 35mm thick factory made 2nd class hard wood, plain framed, panelled shutter (two panel) with lock rail and panel of 9mm thick B.W.P. commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 25 | S&F solid PVC door frame of size 50mmx47mm, made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, and fixing in opening as per specifications & drawing shown in SSR Part-II complete all as specified and as directed. |
| 26 | S&F factory made solid panel PVC door shutter, 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded palin colour PVC \"C\" channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on on either side and as gap insert for top rail and bottom rail . Panellining of plain colour PVC sheet to be fitted in the MS frame welded /sealded to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site as per specifications and shown on drawing in SSR Part-II complete all as specified and as directed. |
| 27 | S&F aluminium powder coated window, sliding type(3 track) with frame size 100x35x1.20mm and shutter 39.40x17.70x1.20mm with two glass shutter and one stainless steel wire mesh shutter including necessary jointing cleats, glazing clips, rubber packing powder coated aluminium snap beading screws with 4mm plain float glass and 0.56mm dia stainless steel wire mesh, fittings, etc, and necessary locking arrangements and including making good the jambs and painting with matching type and shade after and including taking down oldwindows of any description and size complete all as specified and as directed. |
| 28 | M&L for aluminium powder coated door shutter partly paneled and partly glazed shutter having door frame made out of aluminium anodized section of size 100x44.45x2.00mm thick and shutter made out of bottom rail of tube section 114x44.45x2.00mm thick and top rail, niddle rail, styles of tube section 85x 44.45x2.0mm thick using 5mm thick tinted glass of selected quality of required size fixed with rubber beading, aluminium clip, glazing plate and 6-8mm dia anchor rod and 12mm thick both side prelaminated particle board (75mm high from bottom) complete all as specified and as directed.Note : Fixing of aluminium anodized 2 Nos 125mm circular handle, 20mm long, tower bolt - 02 Nos, One No lock 4 lever, vertical type of 65mm with triplicate key, bush and including 3 Nos aluminium butt hinges complete door frame fixed to wall with 6 Nos 150mm long rawl plugs, etc. are deemed to be inclusive with quoted rate. |
| 29 | Dismantling aluminium door shutter including assembly exceeding1.0 Sqm but not exceeding 2.0 Sqm and repair for proper functioning by adjusting moving assembly offloor spring, pivot, hinges, etc. and re-erecting the shutter including straightening, cutting, tightening of door shutter and making easy movement of the shutter including replacing of mortice lock door, door handles, rubberglass beading, etc. complete all as specified and as directed.Note : Floor springs & mortice locks are to be measured and paid separately. |
| 30 | S&F aluminium partition with powder coated aluminium frame work with standard sections of medium size and weight not less than 1.90 Kg/Rm and confirming to catalogue of Jindal or equivalent. The partition shall be fixed with 12mm thick prelaminated particle board with decorative lamination on both sidesof approved colour, in bottom panel and with 5.5mm thick glass of approved make in top panel. The frame shall be with one or more rebates including joining cleats, glazing clips, standard rubber beading,etc, including fixing properly at floor level and wall/column faces properly after and including taking down old partitions of any descriptions and other similar works complete all as specified and as directed . |
| 31 | S&F as in repairs locking arrangements for aluminium doors, i.e, by placing new brass lock 4 lever, vertical typeof 65mm with triplicate keys complete all as specified and as directed. |
| 32 | S&F as in repairs 12mm thick prelaminated particle boards, exterior grade, prelaminated both sides with decorative choice lamination including necessary fitting complete all as specified and as directed. |
| 33 | S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed. |
| 34 | S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed. |
| 35 | S&F extruded aluminium alloy handles of size 150mm, fabricated type, anodised complete all as specified and as directed. |
| 36 | S&F aluminium anodised barrel tower bolt of size 150mm long, extruded section complete all as specified and as directed. |
| 37 | S&F aluminium alloy, anodised, sliding door bolt of size 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed. |
| 38 | S&F as in repairs 200mm long aluminium anodised barrel tower bolt, extruded section complete all as specified and as directed. |
| 39 | S&F as in repairs 150mm long aluminium anodised barrel tower bolt, extruded section complete all as specified and as directed. |
| 40 | S&F 100mm long butt hinges, \"medium weight\", cold rolled, stainless steel complete all as specified and as directed. |
| 41 | S&F as in repairs 40mm width continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and as directed. |
| 42 | S&F as in repairs double action floor spring, hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty including taking down old existing shutters carefully of any size and description and re-fixing in the same position including minor repeirs as required complete all as specified and as directed. |
| 43 | S&F as in repairs hydraulically regulated door closer, aluminium body, heavy duty, designation No 3, universal type, suitable for door shutter 851 to 1000mmin width and weighing between 61 Kg to 80 Kg complete all as specified and as directed. |
| 44 | S&F as in repairs 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed. |
| 45 | Taking down cement or cement lime plaster on brick or stone walls, ceilings, etc. including raking out joints, hacking for key scrubbing down with water, etc, complete all as specified and as directed. |
| 46 | M&L for 15mm thick rendering of external surface in cement mortar (1:4) on fair faces of brick work or concrete surfaces with using water proofing compound (WPC) as per manufacturer\"s instructions complete all as specified and as directed.Note : WPC shall be measured and paid separately. |
| 47 | M&L for rendering 15mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces including finishing the surface with a thin layer of sagol complete all as specified and as directed. |
| 48 | M&L for applying of two coats of oil bound distemper over and including one coat of alkali resistant primer after complete removal of existing finishes, by scraping down of old decorative surface of walls with steel wire brushes of smoke spots, moulds, efflorescent salts including filling of spots with POP/Birla putty and making smooth surfaces complete all as specified and as directed. |
| 49 | M&L for preparation of newly plastered surfaces of walland applyig two coats of cement base paint over and including one coat of primer complete all as specified and as directed. |
| 50 | M&L for preparation of newly plastered surface of wall and applyig two coats of oil bound distemper over and incuding one coat of alkali resistant primer complete all as specified and as directed. |
| 51 | S&F mild steel guard bars conforming to Fe-410 with ends of bars shouldered and riveted, or forged into spikes for window grills compelete all as specified and as directed. |
| 52 | M&L for preparation of new or untreated steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed . |
| 53 | M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over and including one coat of pink primer complete all as specified and as directed. |
| 54 | S&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed. |
| 55 | S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n. exc. 0.5 sqm in each pane complete all as specified and as directed. |
| 56 | S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square exc. 0.5 sqm in each pane complete all as specified and as directed. |
| 57 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed. |
| 58 | S&F as in repairs aluminium anodised snap grid of size 605x605mm frame work for false ceiling to support the boards/tiles including hanging with proper hanging arrangement with anodized galvanised iron wire and adjuster complete all as specified and as directed. |
| 59 | S&F as in repairs hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat of size 40x3mm, 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and as directed. |
| 60 | M&L for 6mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mmx600mm grid complete all as specified and as directed.Note : Frame work for ceiling shall be measured and paid separately. |
| 61 | M&L for 6mm thick plywood, grade BWR, type BB, fixed in ceiling, flat or sloping fixed with screws to timber frame work including cover fillets complete all as specified and as directed |
| 62 | M&L for 3mm thick cover fillets of standard hard board, 40mm wide, and fixing with screws in ceiling falt or slope complete all as specified and as directed |
| 63 | Taking up or down 15mm dia steel water tubing including connections with fittings complete all as specified and as directed. |
| 64 | All as per Serial item No. 63 here-in-before but 20mm dia. |
| 65 | All as per Serial item No. 63 here-in-before but 25mm to 32mm dia. |
| 66 | Supply and laying of CPVC pipes of outer dia 16mm SDR 11 & plain CPVC SDR 11 with fittings, fixed on walls/ceiling or laying in floors complete all as specified and as directed |
| 67 | Supply and laying of CPVC pipes of outer dia 20mm SDR 11 & plain CPVC SDR 11 with fittings, fixed on walls/ceiling or laying in floors complete all as specified and as directed |
| 68 | Supply and laying of CPVC pipes of outer dia 25mm SDR 11 & plain CPVC SDR 11 with fittings, fixed on walls/ceiling or laying in floors complete all as specified and as directed |
| 69 | S&F 15mm dia GI steel water tubing, \"medium grade\" with all fittings, fixed to walls, ceiling or laid in floor complete all as specified and as directed. |
| 70 | All as per Serial item No. 69 here-in-before but 20mm dia. |
| 71 | All as per Serial item No. 69 here-in-before but 25mm dia |
| 72 | Re-fixing of old steel tubing of size 15mm dia and connections in new or old position such as walls, ceiling, floors, etc. complete all as specified and as directed. |
| 73 | All as per Serial item No. 72 here-in-before but 20mm dia. |
| 74 | All as per Serial item No. 72 here-in-before but 25mm dia.. |
| 75 | Disconnecting existing tanks of capacity exc. 250 litre but not exc. 500 litre, setting aside (or lowering if required) for repair of roof surface, etc. and hoisting if required including reconnecting and re-fixing in position complete all as specified and as directed. |
| 76 | S&F as in repairs 15mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (Minimum weight 142gms) complete all as specified and as directed. |
| 77 | S&F as in repairs 15mm dia stop valve, CP brass, fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends foriron pipe or for unions complete all as specified and as directed. |
| 78 | S&F as in repairs 20mm dia stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed. |
| 79 | S&F as in repairs rotational moulded polyethylene (HDPE) water storage tank of capacity 500 litres, three layered, hoisted and fixed in position complete all as specified and as directed. |
| 80 | All as per Serial item No. 79 here-in-before but of capacity 1000 litres. |
| 81 | S&F as in repairs PVC valveless syphonic action type flushing cistern, 10 litre capacity, low or high level, white/ coloured with inlet ball valve, float, handle including fixing brackets and 32mm bore PVC flush pipe, etc. complete all as specified and as directed. |
| 82 | S&F as in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed. |
| 83 | S&F as in repairs vitreous china squatting pan, ‘Orissa’ pattern of size 580x440mm, white, as approved, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and as directed. |
| 84 | S&F as in repairs plastic water closet seat cover (any colour) as approved, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and as directed. |
| 85 | S&F as in repairs 15mm dia bib taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed . |
| 86 | S&F as in repairs CP two way bib taps, 15mm bore, screwed for iron pipe with necessary fitting includingPVC connection complete all as specified and as directed. |
| 87 | S&F as in repairs 15mm dia stop valve, CP brass, fancy type, (concealed type), cast copper alloy, screweddown, high pressure, withcrutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed. |
| 88 | S&F vitreous china wash hand basin of size 580x450mm (flat back or angle back type), \"white\" with 32mm dia brass chromium plated waste fitting, galvanised iron \"light grade\" 32mm bore waste pipe, a pair of cast iron brackets duly painted/erecting stand including cutting and pinning in ends, making good to distrurbed surfaces in cement mortar (1:3) inlcuding taking down old existing unservicable wash hand basin and connected items complete all as specified and as directed. |
| 89 | S&F as in repairs 15mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed. |
| 90 | S&F as in repairs powder coated aluminuium pipe, 20mm dia as in curtain rod, fixed to brackets complete all as specified and as directed. |
| 91 | S&F asin repairs powder coated aluminium brackets for curtain rods complete all as specified and as directed. |
| 92 | S&F as in repairs 15mm dia brass CP mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and as directed. |
| 93 | S&F as in repairs PVC waste outlet pipe, 32/40mm dia for WHB / kitchen sink including waste coupling complete all as specified and as directed. |
| 94 | S&F as in repairs 125mm size extruded aluminium alloy handles, fabricated type, anodised including the screws complete all as specified and as directed. |
| 95 | S&F 125mm size extruded aluminium alloy handles, fabricated type anodised including the screws complete all as specified and as directed. |
| 96 | S&F as in repairs bathroom cabinet mirror (of approved pattern) of size 450mmx350mm regular size with mirror and PVC shelves complete all as specified and as directed. |
| 97 | S&F as in repairs sinks with drainage board, made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm with bowl size 410mmx330mmx160mm complete all as specified and as directed. |
| 98 | S&F as in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mmx420mm with bowl size 410mmx330mmx160mm complete all as specified and as directed. |
| 99 | S&F as in repairs health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 100 | S&F as in repairs 20mm dia tubular towel rail, D type 60cm long between flanges brass chromium plated complete all as specified and as directed. |
| 101 | S&F as in repairs looking mirror of size 600mmx450mm beveled edge of selected quality glass, fixed with PVC moulded frame, fixed to plugs with chromium plated brass screws complete all as specified and as directed. |
| 102 | S&F as in repairs 125mm size chromium plated shower roses with or without swivel joints, including fixing to steel pipe or union complete all as specified and as directed. |
| 103 | Demolition and breaking up drain pipes PVC or AC pipe set in cement mortar for 100mm bore pipe complete all as specified and as directed. |
| 104 | S&F 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 105 | S&F 110mm bore PVC (SWR)bends of any radius, provided with access door complete all as specified and as directed. |
| 106 | S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal, provided with access door complete all as specified and as directed. |
| 107 | S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed to walls complete all as specified and as directed. |
| 108 | S&F as in repairs soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed. |
| 109 | S&F as in repairs 100mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 110 | S&F as in repairs grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and as directed. |
| 111 | M&L for cleaning and removing all scale and dirt, etc, from overhead PVC/RCC tanks of capacity exc. 250 litres but not exc. 500 litres each and from mouths of circulating pipes, etc. complete all as specified and as directed. |
| 112 | M&L for cleaning and removing all scale and dirt, etc, from overhead PVC/RCC tanks of capacity exc. 500 litres but not exc .1000 litres each and from mouths of circulating pipes, etc complete all as specified and directed.NOTE : The contract sum shall be derived by deducting the amount shown in Schedule of Credit attached to this tender from total amount of Schedule \"A\"/BOQ. |
