|
| 1 | REPAIRS TO CHAIR EASY (FD - 17 (M) / 201/ 229 ) |
| 2 | M & L for replacement of damaged front legs of Chair easy with well seasonedTeakwood, all as per drawing & as specified and directed by the Engineer-in-Charge including taking out old leg. |
| 3 | All as peritems NO. 1.10here in before-ditto-but rear legs. |
| 4 | All as peritems NO. 1.10here in before-ditto-but arm-rest of Chair easy. |
| 5 | All as peritems NO. 1.10here in before-ditto-but fillet for canning . |
| 6 | All as peritems NO. 1.10 here in before-ditto-but rail of seat and back. |
| 7 | Taking down oldworn out Plastic Cane from Chair easy (Bottom & back) and reweaving the same with new approved quality Plastic Cane 2 mm wide and 0.4 mm thick half round, white with bordering of 4 mm wide and 0.4 mm thick half round white plastic cane. Canning shall be done with Godrej pattern.All as per drg or as directed by Engr-in-Charge. (Make AJAY/ PREMIER) |
| 8 | REPAIR TO CHAIR DINING (FD-279/ 357) |
| 9 | M & L for replacement of damaged front leg of chair dining with well seasoned 1st class teak wood, all as per drawing and as specified and directed by the Engineer in Charge including taking out old leg. |
| 10 | All as peritems NO. 2 .10 here in before-ditto-but rear leg. |
| 11 | All as peritems NO. 2 .10 here in before-ditto-but back rest. |
| 12 | All as peritems NO. 2 .10 here in before-ditto-but stiffener. |
| 13 | All as peritems NO. 2 .10 here in before-ditto-but side rail. |
| 14 | All as peritems NO. 2 .10 here in before-ditto-but front rail. |
| 15 | All as peritems NO. 2 .10 here in before-ditto-but back rail. |
| 16 | All as peritems NO. 2 .10 here in before-ditto-but fillet for canning. |
| 17 | Taking down oldworn out Plastic Cane from Chair dining and reweaving the same with new approved quality Plastic Cane 2 mm wide and 0.4 mm thick half round, white with bordering of 4 mm wide and 0.4 mm thick half round white plastic cane. Canning shall be done with Godrej pattern.All as per drg or as directed by Engr-in-Charge. (Make AJAY/ PREMIER) |
| 18 | REPAIR TO CHAIR WRITING (FD - 202/ 280 ) |
| 19 | M & L for replacement of damaged front legs of Chair writing made out of well seasoned 1st class Teak wood, all as per drawing & as specified and directed by the Engineer-in-Charge including Taking out old leg. |
| 20 | All as peritems NO. 3.10 here in before-ditto-but rear legs. |
| 21 | All as peritems NO. 3.10 here in before-ditto-but back rest. |
| 22 | All as peritems NO. 3.10 here in before-ditto-but side rail. |
| 23 | All as peritems NO. 3.10 here in before-ditto-but stiffener . |
| 24 | All as peritems NO. 3.10 here in before-ditto-but arm rest . |
| 25 | All as peritems NO. 3.10 here in before-ditto-but fillet for canning. |
| 26 | Taking down oldworn out Plastic Cane from Chair Writing and reweaving the same with new approved quality Plastic Cane 2 mm wide and 0.4 mm thick half round, white with bordering of 4 mm wide and 0.4 mm thick half round white plastic cane. Canning shall be done with Godrej pattern.All as per drg or as directed by Engr-in-Charge. (Make AJAY/ PREMIER) |
| 27 | REPAIR TO STOOL DRESSING (FD-374) |
| 28 | M & L for replacement of damaged legs of stool dressing with well seasoned 1st class Teakwood, allas per drawing & as specified and directed by the Engineer-in-Charge including taking out old leg. |
| 29 | M & L for replacement of damaged front rail of stool dressing with well seasoned 1st class Teakwood, all as per drawing & as specified and directed by the Engineer-in-Charge including taking out old front rail. |
| 30 | M & L for replacement of damaged side rail of stool dressing with well seasoned 1st class Teakwood, all as per drawing & as specified and directed by the Engineer-in-Charge including taking out old side rail. |
| 31 | Taking down oldworn out Plastic Cane from Stool dressing and reweaving the same with new approved quality Plastic Cane 2 mm wide and 0.4 mm thick half round, white with bordering of 4 mm wide and 0.4 mm thick half round white plastic cane. Canning shall be done with Godrej pattern.All as per drg or as directed by Engr-in-Charge. (Make AJAY/ PREMIER) |
| 32 | REPAIR TO TABLE 900 X 600 (WITH/WITHOUTDRAWER) (FD-42. 231. 224. 234. 283 & 284) |
| 33 | M & L for replacement of table top with 18/19mm thick pre laminated particle board one side teak faced (exterior grade) with 4mm thick teak wood edging all round, all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 34 | Taking out broken legs of Table and supply and fixing new leg of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engineer-in-Charge. |
| 35 | Taking out broken front & back rail of Table and supply and fixing new front rail of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engineer-in-Charge. |
| 36 | Taking out broken side rail of Table and supply and fixing new side rail of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engineer-in-Charge. |
| 37 | Taking out broken stiffener of Table and supply and fixing new stiffener of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engineer-in-Charge. |
| 38 | Re-tighting the joints of frame of table 900mm x 600mm with drawer duly provided new boopins pins as per requirement and making tight all lose components complete all as specified & directed and as shown in drg. |
| 39 | Replacement of drawer of Table including one number of CP knob of size 40 x 40 mm fixed to each drawer completeas per drawing and as specified and directed by the Engineer-in-charge including Taking out old drawer. |
| 40 | REPAIR TO TABLE 900’ X 900’ X 760’(FD-88 & FD- 291) |
| 41 | M & L for replacement of table top with 18/19mm thick pre laminated particle board one side teak faced (exterior grade) with 4mm thick teak wood edging all round, all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 42 | Taking out broken legs of Table and supply and fixing new leg of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engineer-in-Charge. |
| 43 | Taking out broken front & back rail of Table and supply and fixing new front and back rail of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engineer-in-Charge. |
| 44 | Taking out brokenSide rail of Table and supply and fixing new side rail of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engineer-in-Charge. |
| 45 | Re-tighting the joints of frame of table 900mm x 900mm with drawer duly provided new boopins pins as per requirement and making tight all lose components complete all as specified & directed and as shown in drg. |
| 46 | Taking out broken stiffener of Table and supply and fixing new stiffener of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engineer-in-Charge. |
| 47 | REPAIR TO TABLE WRITING(FD – 33,249,275) |
| 48 | M & L for replacement of table top with 18/19mm thick pre laminated particle board one side teak faced (exterior grade) with 4mm thick teak wood edging all round, all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 49 | Taking out broken legs of Table and supply and fixing new leg of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engineer-in-Charge. |
| 50 | Taking out broken stiffener of Table and supply and fixing new stiffener of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engineer-in-Charge. |
| 51 | M & L for replacement of shutter with 18/19mm thick pre laminated particle board one side teak faced (exterior grade) with 4mm thick teak wood edging all round including Knob and lock complete all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 52 | M & L for replacement of damaged long rail of table writing with well seasoned 1st class Teakwood, all as per drawing & as specified and directed by the Engineer-in-Charge including taking out old long rail. |
| 53 | M & L for replacement of damaged short rail of table writing with well seasoned 1st class Teakwood, all as per drawing & as specified and directed by the Engineer-in-Charge including taking out old long rail. |
| 54 | Replacementof drawer of table writingincluding one no CP Knob as per sample fixed to each drawer complete as per drawing as specified and directed by the Engr-in-Charge. |
| 55 | M & L for replacement of back side of table writing with 6 mm thick one side teak faced plywood of verious size fixed to wooden frame as per existing and as per drawing. All as specified and directed by Engr-in-Charge. |
| 56 | REPAIR TO TABLE CENTRE (FD-235 / 274) |
| 57 | M & L for replacement of table top with 18/19mm thick pre laminated particle board one side teak faced (exterior grade) with 4mm thick teak wood edging all round, all as per drawing and as specified and directed by the Engineer-in-Charge. |
| 58 | Taking out broken legs of Table and supply and fixing new leg of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engineer-in-Charge. |
| 59 | M & L for replacement of damaged front & back rail of table with well seasoned 1st class Teakwood, all as per drawing & as specified and directed by the Engineer-in-Charge including taking out old front rail. |
| 60 | M & L for replacement of damaged side rail of table with well seasoned 1st class Teakwood, all as per drawing & as specified and directed by the Engineer-in-Charge including taking out old side rail. |
| 61 | Re-tighting the Joints of Frame of tabel c entre duly provied new bamboo Pins as per requirement and making tight all loose components complete all as specified and directed by Engineer-in-Charge. |
| 62 | REPAIR TO TEAPOY(FD-34/35/255/ 382/283) |
| 63 | M & L for replacement of top of tea poy verandah made out of 18/19 mm thick pre laminated particle board one side teak faced (exterior grade) with 4 mm thick teak wood edging all round, all as per drawing & as specified and directed by the Engineer-in-Charge including Taking out old top. |
| 64 | Taking out broken legs of tea poy and supply and fixing new leg of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engineer-in-Charge. |
| 65 | M & L for replacement of damaged front & back rail of tea poy with well seasoned 1st class Teakwood, all as per drawing & as specified and directed by the Engineer-in-Charge including taking out old front rail. |
| 66 | M & L for replacement of damaged side rail of tea poy with well seasoned 1st class Teakwood, all as per drawing & as specified and directed by the Engineer-in-Charge including taking out old side rail. |
| 67 | Taking out broken stiffener of tea poy and supply and fixing new stiffener of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engineer-in-Charge. |
| 68 | REPAIR TO PEG TABLE (FD-277 & FD-384) |
| 69 | M & L for replacement of top of peg table with 18 / 19 mm thick pre-laminated particle board one side teak faced (exterior grade) with 4 mm thick teak wood edging all round, all as per drawing & as specified and directed by the Engineer-in- Charge including taking out old top. |
| 70 | M & L for replacement of leg ofpeg table with new legs of required size made out of well seasoned 1st class Teak wood, all as per drawing & as specified and directed by the Engineer-in-Charge including taking out ofold broken legs. |
| 71 | M & L for replacement of damaged side / front rail of peg table with well seasoned 1st class Teakwood, all as per drawing & as specified and directed by the Engineer-in-Charge including taking out old side rail. |
| 72 | Re-tighting the Joints of Frame ofpeg table duly provied new bamboo Pins as per requirement and making tight all loose components complete all as specified and directed by Engineer-in-Charge. |
| 73 | REPAIR TO TABLE DINING FOR4 /6 PERSONS (FD-273, 376, MAP-II/03, DB-3995) |
| 74 | Taking down old unseviceable top from table dining and S&F new top of table dining 4 persons made out of exterior grade prelaminated MDF board 18mm thick. Make : Green Panel Max of green ply Durotuff. |
| 75 | M & L for replacement of top of table dining 6 personswith 18 / 19 mm thick pre-laminated particle board one side teak faced (exterior grade) with 4 mm thick teak wood edging all-round, all as per drawing & as specified and directed by the Engineer-in- Charge including Taking out old top. |
| 76 | Taking out broken legs of Table and supply and fixing new leg of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engineer-in-Charge. |
| 77 | M & L for replacement of damaged long rail of table dining6 persons with well seasoned 1st class Teakwood, all as per drawing & as specified and directed by the Engineer-in-Charge including taking out old long rail. |
| 78 | M & L for replacement of damaged long rails of table dining4 persons with well seasoned 1st class Teakwood, all as per drawing & as specified and directed by the Engineer-in-Charge including taking out old long rail. |
| 79 | M & L for replacement of damaged short rail of table dining6 / 4 persons with well seasoned 1st class Teakwood, all as per drawing & as specified and directed by the Engineer-in-Charge including taking out old short rail. |
| 80 | REPAIR TO TABLE DINING FOR8PERSONS (FD-230, FD-301(M), FD-273, FD-376) |
| 81 | M & L for replacement of top of table dining 8 personswith 18 / 19 mm thick pre-laminated particle board one side teak faced (exterior grade) with 4 mm thick teak wood edging all-round, all as per drawing & as specified and directed by the Engineer-in- Charge including Taking out old top. |
| 82 | Taking out broken legs of Table and supply and fixing new leg of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engineer-in-Charge. |
| 83 | M & L for replacement of damaged long rail of table dining8 persons with well seasoned 1st class Teakwood, all as per drawing & as specified and directed by the Engineer-in-Charge including taking out old long rail. |
| 84 | M & L for replacement of damaged short rail of table dining8 persons with well seasoned 1st class Teakwood, all as per drawing & as specified and directed by the Engineer-in-Charge including taking out old short rail. |
| 85 | REPAIR TO BED PLYWOOD TOP (FD-246) |
| 86 | M & L for replacement of top of bed ply wood with 12 mm thick commercial plywood, BWR grade, fixed on top of bed plywood with screws all as shown on drawing & as specified and as directed by the Engineer-in-Charge including taking out old bed top. |
| 87 | M & L for replacement of leg ofbed with new legs of required size made out of well seasoned 1st class Teak wood, all as per drawing & as specified and directed by the Engineer-in-Charge including taking out ofold broken legs. |
| 88 | M & L for replacement of damaged long rail of bed with well seasoned 1st class Teakwood, all as per drawing & as specified and directed by the Engineer-in-Charge including taking out old long rail. |
| 89 | Provision of Short rail by converting from long rail obtained from item No.14(c) above including cutting and made to shape and size of short rail from existing broken / unserviceable long rail and fixing the same to bed after removing the damaged short rail all asshown on drg and as directed by Engr-in-Charge. |
| 90 | M & L for repair to head board of bed plywood top by replacing with 4 mm thick one side teak faced plywood fixed to existing frame and edging with 4 mm wide teak wood beading all as shown on drawing & all as specified and directed by Engineer-in-charge including taking out old head board. |
| 91 | All as per Ser No. 14 (e) above but foot board of bed ply wood top all as per drawing & as specified anddirected by Engineer in charge. |
| 92 | REPAIR TOTABLE DRESSING LADIES (FD-251 &FD-32(M)) |
| 93 | Dismantleing of existing unserviceable ply wood at back of mirror frame and S&F new back of mirror made of 6mm thick plywood bwr type complete all as specified and directed. |
| 94 | All as per srl item no 14.10 above but 12mm ply bwr type on the back of dressing table (box) |
| 95 | Removing of existing unserviceable looking mirror of table dressing ladies and S&F new mirror 5mm thick complete all as specified and directed. |
| 96 | Dismantling of existing unserviceable aluminum channel of looking mirror and S&F new alluminnium channel complete all as specified and directed. |
| 97 | Dismantling of existing unserviceable front member of drawer of table dressing ladies andS&F new front member made out of 12 mm thick prelaminated particle board exterior grade one side in natural teak face complete all as specifed and direced. |
| 98 | Dismantling of existing unserviceable bottom of drawers of table dressing ladies and S&F new bottom made of ply wood 6 mm thick BWR type ISImark complete all as shown on drawing and specified and directed. |
| 99 | Dismantling of existing unserviceable broken glass and S&F 5mm thick sliding glass including guide roller complete all as specified and directed |
| 100 | Dismantlig of existing front rail and S&F new front rail of seasoned 1st class teak woood complete all as specifed and direced. |
| 101 | All as per srl item No 14 (8) above but side rail |
| 102 | All as per srl item No 14 (8) above but new leg of seasoned teakwood. |
| 103 | Dismantleing of existing unserviceable knob and S&F of CP knob 25mm dia in square/ round shape complete all as specified and direced |
| 104 | CHAIR DINING CUSHIONED (MAP) (FD/MAP/I/04) |
| 105 | Removing of old unserviceableb cushion seat of chair dining (MAP) and supply and fixing new cushioned seat of chair dining (MAP) cushioned seat shall be made of 75mm thick & 40 density, cushion fixed on 12mm thick BWR ply which shall be rest on 75mm x 75mm x 25mm teak wood stoppers, stoppers to be fixed at four corners of main frame of chair complete all as specified & directed and as shown in drg.Make of foam : Feater foam / Sleepwell / Kurlon. |
| 106 | REPAIR TO SIDE BOARD (FD – 26 M ) |
| 107 | Replacement of top of side board with 18/19mm thick pre laminated particle board one side teak faced with 6mm thick teak wood edging all-round as per drawing and as specified and directed by the Engineer-in-charge including Taking out old top. |
| 108 | Replacement of door shutter of side board with 18/19 mm thick one side teak faced pre-laminated particle board including one number of CP knob (40 x 40 mm)fixed to each shutter with 6 mm thick teak wood beading all as per drawing and as specified and directed by the Engineer-in-charge including Taking out old shutter. |
| 109 | Replacement of drawer of side board including one number of CP knob of size 40 x 40 mm fixed to each drawer completeas per drawing and as specified and directed by the Engineer-in-charge including Taking out old drawer. |
| 110 | Replacement of back side of side board with 6 mm thick commercial ply woodas per drawing and as specified and directed by the Engineer-in-charge including Taking out back side of side board. |
| 111 | REPAIR TO SOFA SET 4 / 5 SEATERFD-281/373 |
| 112 | Supply of foam cushion of size 530 mm X 500 mm X 100 mm thick (32 grade high density cool foam) covered with tapesty cloth (not less than Rs.225/- per mtr cost of cloth) including stitching complete as per sample and all as directed by the Engineer-in-Charge.(Make : Sleepwell / Kurlon or equivalent) |
| 113 | M & L for replacement of damaged front legs ofSofa setwith well seasoned Teakwood, all as per drawing & as specified and directed by the Engineer-in-Charge including taking out old leg. |
| 114 | M & L for replacement of damaged rear legs of Sofa set with well seasonedTeakwood, all as per drawing & as specified and directed by the Engineer-in-Charge including taking out old leg. |
| 115 | M & L for replacement of damaged arm-rest ofSofa set with well seasoned 1st class Teakwood, all as per drawing & as specified and directed by the Engineer-in-Charge including taking out old arm - rest. |
| 116 | M & L for replacement of damagedfront and back rail of seat and back of Sofa set with well seasoned 1st class Teakwood, all as per drawing & as specified and directed by the Engineer-in-Charge including taking out old rail. |
| 117 | M & L for replacement of damagedside rail of seat and back ofSofa set with well seasoned 1st class Teakwood, all as per drawing & as specified and directed by the Engineer-in-Charge including taking out old rail. |
| 118 | Taking out broken stiffener of sofa set seat and backand supply and fixing new stiffener of required size made out of well seasoned 1st class teak wood, all as per drawing & as specified and directed by the Engineer-in-Charge. |
| 119 | SOFA SET FIVE SEATER (BENTWOOD) CWE/NAG/FD-2009/02 & 12 |
| 120 | Removing of old unserviceableb cushion foam and tapestry cloth from seat and back of sofa set 5 seater (bentwood) and supply and fixing new foam cushion 100mm thick & 40mm density for seat and 75mm thick & 32 density of size for back as per drawing, both cushions are covered with new tapestry cloth, cloth quality approved by GE complete all as specified & directed and as shown in drg. Make of foam : Feater foam / Sleepwell / Kurlon. |
| 121 | M&L for preparation of old/new sofa single chair of 5 seater set and polishing of high gloss melamine polish of sofa single chair of 5 seater set complete all as specified & directed. |
| 122 | SOFA SET FOUR SEATER (BENTWOOD) CWE/NAG/FD-2009/02 & 12 |
| 123 | Removing of old unserviceableb cushion foam and tapestry cloth from seat and back of sofa set 4 seater (bentwood) and supply and fixing new foam cushion 100mm thick & 40mm density for seat and 75mm thick & 32 density of size for back as per drawing, both cushions are covered with new tapestry cloth, cloth quality approved by GE complete all as specified & directed and as shown in drg. Make : Feater foam / Sleepwell / Kurlon. |
| 124 | M&L for preparation of old/new sofa single chair of 4 seater set and polishing of high gloss french polish of sofa single chair of 4 seater set complete all as specified & directed. |
| 125 | CHAIR DINING (BENTWOOD) FD-2005/08 |
| 126 | Removing of old unserviceableb cushion foam and tapestry cloth from seat and back of chair dining in special type (bentwood) and supply and fixing new seat of foam cushion 50mm thick & 32mm densityof size of foam 23\" x 16\" and back foam 50mm thick & 32 density of size foam 12\" x 16\" the foam of seat & back shall be covered with new tapestry cloth, cloth quality approved by GE complete all as specified & directed and as shown in drg.Make of foam : Feater foam / Sleepwell / Kurlon. |
| 127 | M&L for preparation of old/new chair dining cushioned (bentwood) and polishing of high gloss french polish of chair dining cushioned ((bentwood) complete all as specified & directed. |
| 128 | CHAIR WRITING (BENTWOOD) CWE/NAG/FD-2005/10 |
| 129 | Removing of old unserviceable cushion seat and back of chair writing (bentwood) and supply and fixing new cushioned seat of chair writing (bentwood) cushioned seat shall be made of 600mm x 450mm x 75mm thick & 40 density, and back cushion shall be made of 450mm x 300mm x 75mm thick & 40 density, cushion fixed on 12mm thick BWR ply which shall be rest on 75mm x 75mm x 25mm teak wood stoppers, stoppers to be fixed at four corners of main frame of chair complete all as specified & directed and as shown in drg.Make of foam : Feater foam / Sleepwell / Kurlon. |
| 130 | M&L for preparation of old/new chair dining cushioned (bentwood) and polishing of high gloss french polish of chair dining cushioned (bentwood) complete all as specified & directed. |
| 131 | Table dressing gents with mirror (FD-31/230/379) |
| 132 | Removing of old unserviceable box of table dressing gents with mirror and supply and fixing with new box (box shall be made of 12mm thick commercial plywood including 0.8mm thick veneered sunmica, bottom of the box of 12mm thick commercial plywood with sunmica and 3mm thick first class hard teak wood beading in the edge of box) complete all as specified & directed and as shown in drg. |
| 133 | Removing of old unserviceable drawers of table dressing gents with mirror and supply and fixing with new drawers (drawers shall be made of 12mm thick commercial plywood including 0.8mm thick veneered sunmica, bottom and back of the drawers shall be made of 6mm thick commercial plywood without sunmica and 3mm thick first class hard teak wood beading in the edge of box) complete all as specified & directed and as shown in drg. |
| 134 | Removing of old unserviceable plywood of table dressing gents with mirror and supply and fixing with new 6mm thick commercial plywood back side of mirror frame complete all as specified & directed and as shown in drg. |
| 135 | S&F in replacement of knob as per sample approved by GE complete all as specified and directed. |
| 136 | Removing of old unserviceable broken looking mirror of table dressing gents with mirror on wall and supply and fixing of new locking mirror, mirror shall be made of 5mm thick glass with the help of 3mm thick flat iron key plates of MS 25 mm x 25mm in section and machine screw of appropriate size complete all as specified & directed and as shown in drg.Make : Modiguard/Swastik/Atul. |
| 137 | Table bed side (FD-276,248) |
| 138 | Removing of existing UNSV top of table bed side and S&F new top made out of prelaminated particle board 18mm thick ISI marked exterior grade including 4mm thick teak wood beading all around the edges. All as per drg and as directed by Engr-in-charge. |
| 139 | All as per items No.24.10 here in before-ditto-but side made out of prelaminated particle board 18mm thick. |
| 140 | All as per items No. 24.10 here in before-ditto-but back made out of 6mm ply wood. |
| 141 | All as per items No 24.10 here in before-ditto-but shelf made out of prelaminated particle board 18/12mm. ISI marked. |
| 142 | M&L for preparation of surfaces by removing of old existing fade out polish from following wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality/PFU with high gloss finish on exposed surfaces to view all as specified and as directed by Engr-In-Charge. |
| 143 | Chair Easy FD-17/229/201 |
| 144 | Chair Dining FD-228/279 |
| 145 | Chair Writing / Chair CB Office FD-20/250 |
| 146 | Stool DressingFD-27/282 |
| 147 | Table 3’ X 2’ (With /Without Drawer)FD-42, 223, 231, 283 & 284 |
| 148 | Table 3’ x 3’ FD-88/291 |
| 149 | Table writingFD-33/275 /249 |
| 150 | Table Centre FD-29/274/375 |
| 151 | Teapoy FD-34/35/255/ 382/283 |
| 152 | Peg TableFD-25/277 |
| 153 | Table dining 4/6 pers, FD-30/273,FD/MAP-II/03 |
| 154 | Table dining 8 pers |
| 155 | Bed ply wood top FD-246 |
| 156 | Table dressing ladies FD-32/251 |
| 157 | Chair Diningwith Cushion FD/MAP/06 |
| 158 | Side board FD-26, 241/1112 |
| 159 | Sofa set 4 seated FD-281/ 258 |
| 160 | Sofa set 5 seated FD-281/ 258 |
| 161 | Table dressing gents with mirrorFD-31/230/379 |
| 162 | Table bed side(FD-276/ 248) |
| 163 | NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.)[(-) Rs. 94936.50] |
