|
| 1 | Demolition brick work or stone / boulder masonry built in cement mortar as in wall etc complete all as specified and directed. |
| 2 | M&L brick work with modular fly ash bricks straight or curved on plan exc 6m mean radius wall built in cement mortar 1:6 complete all as specified and as directed by EIC. |
| 3 | Taking down cement or cement limeplaster on brick walls etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed . |
| 4 | M&L for 15 mm thick cement plaster on external surfaces of wall in CM 1:4 including finished surfaces even and smoothwithout using extra cement mixed with WPC as per manufacturer instructions complete all as specified and directed.Note :- WPC shall be measured & paid separately. |
| 5 | Supply only water proofing compound of approved make complete all as specified and directed. |
| 6 | M & Lfor preparation of newly plastered surface of wall and applying two coats of cement base paint over and incl a coat of alkali resistant primer complete all as specified and as directed.. |
| 7 | Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground posts embeded in concrete, brick work, masonry etc complete all as specified and as directed. |
| 8 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface comlete all as specified and directed |
| 9 | Demolition of cement concrete un-reinforced Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing the rubbish off the premises complete all as specified and as directed. |
| 10 | Demolition of cement concrete reinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing the rubbish from MOD landcomplete all as specified and as directed. |
| 11 | M&L for cement concrete type D2 1:4:8 (40mm graded aggregate) as in foundation filling and mass concretecompleteall as specified and directed. |
| 12 | M&L for 40mm thick plain cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in floors, foot paths, finishing the concrete surfaces even and smooth using extra cement complete all as specified and directed |
| 13 | M&L for 75mm thick plain cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as in plinth protection , finishing the concrete surfaces even and fairlaid in bayscomplete all as specified and directed |
| 14 | M&L reinforced cement concrete (nominal mix) 1:2:4 type B1 using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed |
| 15 | M&L reinforced cement concrete(Nominal mix) 1:2:4 type B1 using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m spancomplete all as specified and directed. |
| 16 | Use and waste of form work to sides of pillars, posts, struts, piers, columns, and stanchions, square or rectangular or polygnal , fair finished surfaces of concrete completeall as specified and directed |
| 17 | M&l for PCC1:2:4, type B0(using 12.5mm graded stone aggregates) as in coping etc. complte all as specified and directed |
| 18 | S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 19 | Ditto - but 5mm dia and over upto and including 10mm dia in stirrups,spacer and binderscomplete all as specified and directed. |
| 20 | Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for fair finished surfaces complete all as specified and directed |
| 21 | Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished surfaces of concrete complete all as specified and as directed |
| 22 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 23 | Dismantling fencing wire mesh, any type complete all as specified and directed. |
| 24 | Material & labour for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering ,Doors etc .to be prepared for hanging or sliding with and including either hookes and hinges or steel hanging doors fittings (exclusive of steel covering running rails and guides) and hanging also fastening and fixing including pintels complete all as specified and directed. |
| 25 | S & F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 26 | S&F galvanised two strand barbed wire, 2.24mm dia, barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossings with provision of galvanised mild steel wire stapples or steel pinscomplete all as specified and directed. |
| 27 | Supply only Chain link MS Galavanised fencing any size or type complete all as specified and directed. |
| 28 | Fixing olnly chain link fencing including line wires, any mesh, size and type to any type of standards rails, straining bolts, etc including provision of binding wirecomplete all as specified and directed. |
| 29 | M&L for angle iron / flatiron for fixing chain link or hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and clountersunk for balusters running bars, for doors, balusters, nosing to steps including embneding in concrete and screwing etc wid ties for roof including securing bolts, posts and struts in fencing including cutting tops shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or reveting etc, and similar work conforming to Fe-290 or Fe-165 complete all as specified and directed. |
| 30 | S&F mild screw bolts 11 to 15 mm diameter of neck shank (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to fitted with washers and one hexagonal or square exc. 5cm but n.exc 10cm long complete all as specified and as directed. |
| 31 | M&L for prepration of newsteel surfaces andapplying two coats of synthetic enamel paint and incl over a coat of Aluminium red oxide on new steel surfaces of any description over 10cm width or girth complete all as specified and directed. |
| 32 | Total contract sum shall be calculated after deduction of schedule of credit amount of Rs. 49,500.00 |
