Tender For Daulatpur-Harirampur-Dehaband Road From 0.00 Km To 7.00 Km, Rectification Of Crack Portion In Stretches, Under Dakshin Dinajpur Highway Division In The District Of Dakshin Dinajpur During The Year 2025-26., Buniadpur-West Bengal
TDR : 49245140
Tender Notice
Corrigendum Details
BOQ
Expired
Buniadpur
West Bengal
Corrigendum : Tender For Daulatpur-Harirampur-Dehaband Road From 0.00 Km To 7.00 Km, Rectification Of Crack Portion In Stretches, Under Dakshin Dinajpur Highway Division In The District Of Dakshin Dinajpur During The Year 2025-26.
Name of Work: Daulatpur-Harirampur-Dehaband Road from 0.00 Km to 7.00 Km, Rectification of crack portion in stretches, under Dakshin Dinajpur Highway Division in the district of Dakshin Dinajpur during the year 2025-26.
Sl. No.
Item Description
1
Providing and laying of Needle Punched and mechanically bonded non-woven Geotextile indigenously manufactured from high quality fibers on the prepared subgrade for Seperation. (Ref to MoRT&H\"s 5th Specification 702).For Type-III (450gsm) non woven Geotextile
2
Providing and laying Bituminous Profile Corrective Course using Mobile Hot Mix Plant (Light Duty) and using aggregates of Grading-2 of Table-33 premixed with 75kg of bitumen per cum, transported to site laid over a previously prepared surface at specified laying temperature to the required grade, level and alignment, as per specification to achieve the desired compaction including cost and carriage of stone materials and bitumen, hire charges of machinery and equipment, cost of fuel and lubricants and wages of operational staff, quality control complete as per direction of Engineer-incharge.
3
Providing & laying Semi-dense Bituminous Concrete (SDBC) as wearing coarse by Hot Mix Plant, using coarse aggregates, fine aggregates, filler materials and binder of required specification and grading as per approved job mix formula, over thoroughly cleaned surface coated with tack coat, including screening, cleaning of aggregates, mixing the components as per approved Job Mix Formula with hot binder, carrying the mixture by tipper truck or any other approved suitable arrangements, laying the mixture uniformly, maintaining the specified laying temperature, thorough rolling with power roller with necessary hand packing and pinning to give an uniform surface to achieve the desired density of at least 98% of that of Laboratory Marshall specimen, including the cost and carriage of aggregates, filler and binder, heating the binder, preheating the aggregates, and filler to the specified temperature, including the hire charges of Hot Mix Plant and other machineries, pay of operators, cost of fuel and lubricants and all other incidental charges complete.For Grading 2 (10 mm nominal size, 25-30 mm thick.).Using Drum mix Type HMP of minimum capacity 40-60 TPH.
4
Providing and applying tack coat with Cationic Bitumen Emulsion of approved grade conforming to IS: 8887-1978 on the prepared surface cleaned with Hydraulic broom, moistening the surface including cost and carriage of emulsion, hire charges of machinery and labour, cost of fuel and lubricants all complete as per Clause 503 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).On Bituminous Surface (Using RS-1 Type Emulsion at the rate of 0.25 kg per sqm.)
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
