Miscellaneous Work Of Providing Furniture And Various Item At Newly Constructed Subdivision Office Of Kadana S.Dn For Modern Subdivision Office Under Lunawada Division., Panchmahal-Gujarat

Miscellaneous Work Of Providing Furniture And Various Item At Newly Constructed Subdivision Office Of Kadana S.Dn For Modern Subdivision Office Under Lunawada Division.-1 & 12 mm Thick Densified edges on the Tile Periphery for Extra Strength The Light weight calcium silicate ceiling tiles shall have , light reflection 85% non-combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity0.043° w/m KC.for the best thermal Insulation . The Light weight calcium Silicate tile shall be of approved texture Fine Fissured/ Spintone/Cosmos having NRC value of 0.5 & Globe having NRC value of 0.75 NRC or equivalent of size 595 X 595 mm to be laid on true horizontal level suspended inter locking metal grid of hot dipped galvanized steel sections (galvanizing @120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and size of 24X38mm made from 0.30 mm thick (minimum) sheet, 1200mm centre to centre, and cross ‘T’ of size 24X28mm made out of 0.33mm (Minimum) sheet spaced 1200mm along spaced between main ‘T’ at 600mm centre to centre to form agrid of 1200X600mm and secondary cross ’T’ of length 600mm and size 24x28mm made of 0.30 mm thick (Minimum) sheet to be interlocked at middle of the 1200X600mm panel to form grid of size 600X600mm resting on periphery walls/partitions on a perimeter wall angle pre-coated steel of size (24X24X3000mm made of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm centre to centre with 25mm long dry wall screws @ 230mm interval and laying 15mm thick Densified edges light weight calcium silicate ceiling tiles of approved texture (Fine Fissured/Cosmos/Spintone) in the grid including, cutting /making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required, Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25X35X1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm G.I. adjustable rods with galvanized steel level clips of size 85X30X0.8mm, spaced at 1200mm centre to centre long main ‘T’ bottom exposed with 24mm of all T-sections shall be pre-painted with polyester baked paint, for all heights, as per specifications, drawings and as directed by engineerin- charge.Note:- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm. The calcium silicate ceiling tiles shall have NRC. Value of 0.50 (Minimum) for Fine fissured/Spintone/Cosmos and 0.75 NRC for Globe, light reflection 85% non combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity. 0.043° w/m KC.for the best thermal Insulation. 220.00 2 Supplying and stacking rubble of approved quality for road soling of about 200 to 250 mm including transportation, stacking rubble closed in rectangular stack etc complete as directed by E.I,C. (For voids 30 % will be deducted.) 730.000 3 Supplying & Spredaing Quorry Dust, stone greet, quarry greet/spill etc. including leveling as directed by EIC. 180.000 4 Providing and Fixing Stainless Steel 304 Grade 16 gauge railing with 38 MM Dia Top Pipe, 38 MM Dia Vertical support at every 1.0 Mtr C/C maximum &Two Nos of 20 MM Dia horizontal pipe as per design as per good engineering practice, the end condition of pipe shall be closed with SS Cap & properly grinded. The measurement shall be consider & paid for top pipe only. 35.000 5 Providing and Fixing Stainless Steel 304 Grade 16 gauge railing with 38 MM Dia Pipe, & 20 MM Dia support Kitchen / Duplex make& flanges as per good engineering practice. The end condition of pipe shall be closed with SS Cap & properly grinded. This item is for pipe fixed in wall without any vertical support. 40.000 6 Office Table For D.E. Cabin Size (6x3x2.5) (W-19) Table: Size: (1.83 x 0.90 x 0.75) Provinding and fixing 19mm thick plywood top table with fixing 25mm thick plywood (19mm + 6mm) patta of 300mm width fixed on bottom periphery .The plywood table top is laminated on top and bottom.the front edges of the table top surface is to be covered with 12mm thick teak wood bedding patty with melamine polish finish of approved shed.The Rate includes the cost of fixiing telescopic suspended metal keyboard with mouse tray. 38mm thick vertical legs made from plywood with exterior side 1mm and interior side 0.8mm approved laminate. Appron should be made from plywood with laminated finish as per detail drawing and CPU Trolley should be supplied of metal powder coated. Footrest (0.75 x 0.37) should be from teakwood with melamine polish complete.Seperate Drawer unit box (0.65 x 0.41 x 0.43) to be made from 19mm plywood with 1mm outside and 0.8mm inside laminate as well as approved shade for Left or Right sidewith wooden bidding patti on nylon castors with handle,lock and telescopic channel.Rate includes the cost of all materials and labour etc. complete as per detail drawing and instruction of engineer-in charge.The necessary hardware fitting shall be as per approved make list. 1.000 7 Office Table For J.E. Cabin Size (5x3x2.5) (W-18) Table: Size: (1.5 x 0.90 x 0.75) Provinding and fixing 19mm thick plywood top table with fixing 25mm thick plywood (19mm + 6mm) patta of 300mm width fixed on bottom periphery .The plywood table top is laminated on top and bottom.the front edges of the table top surface is to be covered with 12mm thick teak wood bedding patty with melamine polish finish of approved shed.The Rate includes the cost of fixing telescopic suspended metal keyboard with mouse tray. 38mm thick vertical legs made from plywood with exterior side 1mm and interior side 0.8mm approved laminate. Appron should be made from plywood with laminated finish as per detail drawing and CPU Trolley should be supplied of metal powder coated. Footrest (0.75 x 0.37) should be from teakwood with melamine polish complete.Seperate Drawer unit box (0.65 x 0.41 x 0.43) to be made from 19mm plywood with 1mm outside and 0.8mm inside laminate as well as approved shade for Left or Right sidewith wooden bidding patti on nylon castors with handle,lock and telescopic channel.Rate includes the cost of all materials and labour etc. complete as per detail drawing and instruction of engineer-in charge.The necessary hardware fitting shall be as per approved make list. 8 Office Table For Size (4x2x2.5”) (W-15) Table: Size: (1.2 x 0.90 x 0.75) Provinding and fixing 19mm thick plywood top table with fixing 25mm thick plywood (19mm + 6mm) patta of 300mm width fixed on bottom periphery .The plywood table top is laminated on top and bottom.the front edges of the table top surface is to be covered with 12mm thick teak wood bedding patty with melamine polish finish of approved shed.The Rate includes the cost of fixing telescopic suspended metal keyboard with mouse tray. 38mm thick vertical legs made from plywood with exterior side 1mm and interior side 0.8mm approved laminate. Appron should be made from plywood with laminated finish as per detail drawing and CPU Trolley should be supplied of metal powder coated. Footrest (0.75 x 0.37) should be from teakwood with melamine polish complete.Seperate Drawer unit box (0.65 x 0.41 x 0.43) to be made from 19mm plywood with 1mm outside and 0.8mm inside laminate as well as approved shade for Left or Right sidewith wooden bidding patti on nylon castors with handle,lock and telescopic channel.Rate includes the cost of all materials and labour etc. complete as per detail drawing and instruction of engineer-in charge.The necessary hardware fitting shall be as per approved make list. 9 Back Unit Size 6x2.5”x16” , The Top, Sides, Shutters and Shelves shall be made using 19 mm thick Green make ply and back side using 8 mm thick ply and 1 mm thick laminates etc. complete as directed by E.I.C. 10 Back Unit Size 5x2.5”x16” The Top, Sides, Shutters and Shelves shall be made using 19 mm thick Green make ply and back side using 8 mm thick ply and 1 mm thick laminates etc. complete as directed by E.I.C. 11 Back Unit Size 4x4x16” The Top, Sides, Shutters and Shelves shall be made using 19 mm thick Green make ply and back side using 8 mm thick ply and 1 mm thick laminates etc. complete as directed by E.I.C. 12 Three Seater Sofa (H-27) 13 Three Seat Bench (S-7) 14 Executive Chair S-11 15 Revolving Chair S-10 16 Revolving Chair S-12 17 Office Chair Double Pipe Visitor Chair S-5

Refer document

Refer document

INR 21.05 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB