|
| 1 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Vibratory roller. to the required density. By Mechanical Means - Grading I (Using Screening Type A (13.2) mm Aggregate) |
| 2 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)(Non SCADA Item) |
| 3 | Supplying hard murum/ kankar at the road site, including conveying and stacking complete |
| 4 | Spreading hard murum/ soft murrum/ gravel or kankar for side width complet |
| 5 | Providing and fixing board displaying information, such as \"Name of work, Tender cost,Name of Contractor, Work completion and liability period etc\", having rectangular shapeof 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted withone coat of Zinc chromate stoving primer and two coats of enamel paint on front side andgrey stove enamel on back side and border / messages / symbols etc. with approved colourshade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly crossbraced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angleiron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black andwhite bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling,transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge |
| 6 | Providing and laying in situ cement concrete M -30 with tremix treatment for 200 mm thickness for Concrete Road is including laying plastic sheet for 125 micron thickness with groove cutting of 4 mm wide and 20 mm deep with necessary refilling with bitumen ( excluding reinforcement) with coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) etc. complete with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.(Non SCADA Item) |
| 7 | Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. |
| 8 | Providingandlayingweepholesof100mmdiameterPVCpipesasperdrawingfor abutment returns, return walls etc. Complete. |
| 9 | Providingselectedhardmurumfillingincludinglayinginlayersof15to20cmwithwatering and compacting etc. complete. |
| 10 | Providingand fixing 25mm diameter steel anchor dowel in hard rock including drilling holeof32mmdiameterupto0.75mtrsdepth,placingthedowelinpositionandeffectively grouting the hole with CM 1:1 proportion etc. complete. |
| 11 | Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 900mm diaMetrein proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. |
| 12 | Providing and fixing Mandatory/Regulatory sign boards in circular shape of ______ mmdia made out of ____mm aluminum sheet bonded with white retro reflective sheeting ofClass B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressuresensitive/heat activated adhesive retoreflective specified back ground, border and backside retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side withgrey stove enamel paint and supported on one no. of M. S. angle iron post of size 65 mmX 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternateblack and white bands of 25 cm width including G.I. fixtures etc; fixing the boards inM25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc;complete. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) shallhave 7 years written warranty from the manufacturer and authorised distributor/convertorissued for field performance including the screen printed areas and cut-out sheeting andcut-out durable transparent overlay film and this warranty certificate in original should besubmitted to the Engineer in charge by the contractor/supplier. 600 mm dia made out of 1.5mm aluminum sheet |
| 13 | Excavationforfoundation insoftrockincludingshoringandstrutting,dewateringas necessary and disposing off excavated stuff as directed etc. complete.b) 1.50m to 3.00m lift, Add 10% |
| 14 | Providing and laying in situ / ready mix cement concrete of M-10 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting andcuringetc.complete.(withreversibledrumtypemixerwithSCADAwithfine agreegates of required specifications (Natural sand / VSI sand finely washed etc ) (Non SCADA Item) |
| 15 | Providing and laying in situ / ready mix / ready mix M25 RCC work with trap/ granite/ quartzite/gneissmetalinwellsteiningincludingshuttering,compactingbyvibrating, finishingandcuringetc.complete.(fullyautomaticmicroprocessorbasedPLCwith SCADA enabledconcretebatchmixplant /pan mixerwith fineagreegates ofrequired specifications ( VSI sand finely washed etc ), excluding reinforcement)(Non SCADA Item) |
| 16 | Providing, cutting, bending, hooking, tyingand laying in position TMT FE 500 steel bars for reinforcementfor all RCC works as per detailed drawings etc. complete. |
| 17 | Providing and laying pitching on slopes laid over prepared filter media including boulder apron laid dry in frontoftoeofembankmentcompleteasperdrawingandtechnicalspecificationsetc.complete.(bystone/boulder) |
| 18 | Providing and fixing _______ metre stones as per I.R.C. standard including fixing in standard size ______ block including curing, painting lettering etc. complete. RCC 200 Metre Stone in CC 1:4:8 |
| 19 | Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete |
| 20 | Providing and Laying hot applied thermoplastic road marking strip on Bituminous Surface of specified shade/ colour of 2.5 mm thick including 1.5 Refractive index reflectorizing glass beads @ 250gm/sqm .Thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35:2015. Initial Dry reflectivity RL shall be > 250 mcd/sqm/lux measured in the initial 7 days and sustained reflectivity RL of 100 mcd/sqm/ lux and Qd of 100 mcd/sqm/ lux measured at the end of 2 years by means of a Standard ReflectoMetre of Zehntner, Easylux, Delta make capable of measuring RL & QD both according to IRC 35:2015 clause 15.5. The finished surface to be level, uniform, and free from streaks and holes complete as per direction of Engineer-in-charge and in accordance with applicable specifications.(Refer MORTH Clause 803 for technical Specification and Performance for IRC 35:2015). |
| 21 | BASIC TEST OF AGGREGATE. 2)Sieve Analysis. |
| 22 | CONCRETE. 1)Compressive Strength OF C.C. Cube (Set of 3 cubes). |
| 23 | Royalty For Rubble stone excluding royalty |
| 24 | Royalty For Hard Murum |
| 25 | Royalty For Murum at Site |
