Tender For Providing Road Lighting From Cisf Entrance Gate To Pump House At Oil Wharf - Reg.; 1 Fabrication & Supply of hot dip galvanized octagonal street light pole of height 9 Mtr with BSEN-10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangement, including, the supply of suitable boards to terminate two nos. of 25 Sq mm Aluminium armoured cables on Bakelite sheet and 2 Amps MCB (MCB Make: Schneider, Legrand, Siemens, Havells) as per IS specification suitable to withstand the wind speed of 180KMPH for. (approx) Height pole having approximate dimensions of Bottom 130mm , Top 70mm with 3mm tick, base plate 220x220x12mm and 4 nos of M-20x 700 long J bolts along with template. Make: Bajaj / Valmont/Laasma /Transrail / Utkarsh /KSP/Skipper / Consou 2 Cutting of WBM / RCC/ BT surface road/wall with high pressure compressor for making cable trench for laying of cables and disposal of debris as directed by engineer in charge with all labour tools and tackles. 3 Supply and providing of P.C.C. 1:3:6 with 20 mm graded granite as coarse aggregate and river sand as fine aggregate including mixing, depositing in position, tamping, finishing and curing for base/pole concreting, road cutting etc. as directed by Engineer in charge including all labour and tools. 4 Foundation and erection charges with special T&P, for 9Mtr long Octagonal / Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.60Mtr x 0.60Mtrs x 1.40 Mtr size M20 cc work vibrated concreting mixing with necessary steel reinforcement as directed by the field engineers during execution including excavation of Earth/BT all labour charges and cost and conveyance of materials etc. complete. 5 Fabrication, Transportation and supply of 1.5 Mtr Length decorative type galvanized Arm Bracket suitable sizecomplete as directed by Engr.I/cMake: Bajaj / Valmont / Laasma /Transrail /Utkarsh / KSP/Skipper / Consoul 6 Supply of 150 Watt LED Street lightLuminaire made of pressure diecast alluminium body with powder coated, having protective toughened glass,to work on Input voltage 120 - 270 V AC, CCT: Above 55/00K, minimum CRI>70, etc., complete as directed by Engineer in charge with all labour and tools & tackles MAKE:PHILLIPS / BAJAJ / CG / HAVELLS / KSP /SURYA /HALONIX /SYSKA / K-lite 7 Supply of3 ½C x 25 Sq.mm LT cable 1.1 KV, , PVC sheathed armoured aluminium conductor cable of approved brand and conforming to IS 7098 (Part I. complete as directed by Engineer-in-charge including all materials labour, tools and tackles. BRANDS: UNIVERSAL / UNICAB / GLOSTER / FINECAB / POLYCAB / KEI / RPG / FINOLEX / HAVELLS / V- GUARD / GLOSTER 8 Transportation Drawing / Clamping of existing 3 ½ Core, 25 Sq.mm aluminum conductor cable through existing HDPE/pipe/ complete as directed by engineer in charge including all labour, tools and tackles. (Cable will be supplied by VPT at free of cost) 9 Removal of existing BG rail poles / tubular poles / spun poles duly breaking the coping and base PCC, excavating the earth upto 0.5 Mtr. Depth from the ground level cutting the pole, refilling the excavated the earth and making the surface good to match the surface and returing the removed pole to E/M section stores as directed by Engineer –in-charge 10 Supply and laying of 40/50 mm dia PE 80 grade(10Kg/cm2) HDPE pipe in the existing trench with all materials labour tools and tackles as directed by Engineer in charge.MAKE: TULASI / SUDHAKAR / NANDI / KSP 11 Supply installation testing commissioning of Automatic Street Light Control System consisting of Optical Micro Sensor, Low voltage / High voltage trip and reset, operating voltage 150 - 280V AC per Phase, 50 HZ in suitable SMC enclosure of IP 54 protection, MCBs and contactor suitable to control the load of 8 KW of Three phase load with necessary fixing brackets (Including suitable end termination with brass compression gland and aluminium lugs etc.,).MAKE: Kakatiya Energy Systems/KSP or Any Equivalent reputed make 12 Supply and fabrication of steel by using suitable flats, angles, channels of required sizes to provide required cross arms, back clamps, support clamps, frames, GI/MS pipe including cutting, bolting, riveting, drilling, welding etc. including providing one coat of zinc rich epoxy paint primer complete as directed by Engineer in charge. 13 Supply & Providing, earth station using 3 meters long, 40 mm medium grade G.I. pipe conforming to IS 3043 with enclosureduly filling with alternate layers of saltand charcoal complete with GI funnel and covering with PCC cover as directed by engineer in charge including all labour and material. 14 Supply and laying 25 mm X 5 mm G.I strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) as directed by engineer in charge. 15 Fixing Testing and commissioning of street light luminaires to the pole including providing suitable length of 3 core x1.5 sq.mm control cable frompole incoming power supply cable termination to led light as directed by Engr. I/c complete with all labour tools and tacklesMake of the cable: Torrent / Universal / Unicab / Havells / KEI/ Polycab / Gloster /orbit/ KSP/ Paragon/ RR Kabel/ RPGNote: Street light luminaires will be supplied by VPA 16 Supply of 5 core x 2.5 sq.mm multi stranded copper cable as per IS specification confirming to IS:7098 (Part-I/1988) Make of the cable: Torrent / Universal / Unicab / Havells / KEI/ Polycab / Gloster /orbit/ KSP/ Paragon/ RR Kabel/ RPG 17 Transportation and drawing of 5 core x 2.5 sq.mm multi stranded copper cable through the existing PVC pipe including connecting to switch gear with suitable lugs and junction boxas directed by Engineer –incharge complete with all materials, labour, tools and tackles.
