|
| 1 | Excavation over areas, n.exc 1.5 m deep andgetting out in any type ofsoil complete all as specified and directed. |
| 2 | Excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 Sqm on plan and not exceeding 1.5 mtr in depth and getting out in any type of soil, complete all as specified and directed. |
| 3 | Surface excavation not exceeding 30cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and directed. |
| 4 | Removing excavated materials/ soils,exceeding 1.5Km but not exceeding 5 Kmand depositing where directed at a level not exceeding 1.50mtrs, complete all as specified and directed. |
| 5 | Demolition of cementconcrete (unreinforced) of any description and in any position not otherwise specifically provided for complete and disposal of unserviceable material, debris and rubbish to a distance not exceeding 100m complete all as specified and directed. |
| 6 | Reinforced concrete pipes, class NP-3, laid & jointed complete with collars, bore of pipe 600mm, complete all as specified & directed. |
| 7 | Rolling and consolidating formation surfaces in cutting with 8 to 12 tonne power roller, including filling in soft spots, depressions, etc. which occur during rolling (for portion coming in cutting/original ground only) to required camber and gradient, etc. including watering before or during rolling, all complete all as specified and as directed . |
| 8 | 150mm thick (Spread thickness) Soling (or sub base) with broken boulders or quarried stone, inter stices filled, surface formed androlled and consolidated to required gradient and camber complete all as specified and as directed . |
| 9 | Water bound macaadam 150mm thick (Compacted thickness), in two layers of 75mm thick ,laid with coarse aggregate of grading 2 (63mm to 40 mm size) or of grading 3 (50 to 20mm size),using Lime stone, sand stone, flint or Quartzite, of best quality locally available spread and rolled with 10 to 12 tonnes power roller, consolidated to required gradient and camber, complete all as specified. |
| 10 | Providing premix bituminous macadam(consolidated thickness 75mm or less) with 4% binder content of paving bitumen by weight of total mix, rolled and compacted to required camber and gradient with 8 to 12 tonne power roller, complete all as specified and directed. Note:- Bituminous macadam shall be mixed in hot mix plant, transported andshall be laid in single layer with self propelled mechanical paver, rolled with vibrator roller. |
| 11 | Preparing un-surfaced water bound macadamsurfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with power sweeper or compressor to remove all loose dirt etc., applying evenly a priming/ tack coat with bituminous primer using paving bitumenat 10 kg per 10 sq metre of road surface, laying bituminous premix semi dense asphaltic concrete 40mm consolidated thickness with 5.5% bitumen binder content by weight of total mix using 20mm crushed stone aggregate, rolled and compacted to required camber and gradient with 8 to 12 tonne vibrator power roller, complete all as specified and directed. Note:- Bituminous premix semi dense asphaltic concrete shall be mixed in automatic temperature controlled hot mixing plant, transported and premix carpet shall be laid in single layer with self propelled mechanical paver, rolled with vibrator roller. |
| 12 | Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with power sweeper or compressor to remove all loose dirt etc., applying evenly a priming/ tack coat with bituminous primer using paving bitumenat 5 kg per 10 sq metre of road surface, laying bituminous premix semi dense asphaltic concrete 40mm consolidated thickness with 5.5% bitumen binder content by weight of total mix using 20mm crushed stone aggregate, rolled and compacted to required camber and gradient with 8 to 12 tonne vibrator power roller, complete all as specified and directed. Note:- Bituminous premix semi dense asphaltic concrete shall be mixed in automatic temperature controlled hot mixing plant, transported and premix carpet shall be laid in single layer with self propelled mechanical paver, rolled with vibrator roller. |
| 13 | Preparing bituminous/concrete surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements using hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 mixed with radium glass beads @ 250gm/ Sqm with special applicator machine to provide reflectivity and night vision (approx temp being 200°C at the time of laying) including cleaning the surface of all dirt, dust and other foreign material complete all as specified. Note:- Road marking lines at the centre of road shall not be continuous, whereas the lines at outer sides of road shall be continuous i.e in one length. |
| 14 | Brick work with old size fly ash bricks, class 7.5, straight or curved on plan exc. 6 metre mean radius built in cement mortar 1:4 (01 cement : 04 coarse sand) all as specified & directed. |
| 15 | Rendering cement plaster 10mm thick in cement mortar 1:4 (1 cement : 4 coarse sand) in two layers (5mm thick first layer and 5mm thick second layer),on fair faces of brick wall or on concrete surfaces, surface finished even and smooth without using extra cement, all as specified. |
| 16 | Preparation ofnewly plastered surfaces of walls and applying three coats of colour wash over one coat of white wash complete, all as specified. |
| 17 | Framed work such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikes framed guard bars including cutting, drilling, welding etc confirming to Fe-290 Gde E-165 all as specified and directed. |
| 18 | Steel tubular swaged poles complete with base plate 8mm thick welded with pole, finial taper plug, bolt, nut and screws as specified type 410 SP-31 (9m long) including one coat of red-oxide zinc chrome primer and two coats of aluminium paint on surfaces exposed to view and making 30cm wide strips (total 5 Nos) with yellow and black paint alternately on external surface above PCC benching including numbering with black paint and painting with bituminous paint internally complete and externally for portion embedded in PCC, complete all as specified and directed. Note:- Earth work & excavation and PCC shall be measured and paid under respective Items of BOQ. Make: SHIVAM METAL SHAPERS / HPL |
| 19 | PCC 1:3:6 (nominal mix) type C-1(using 20mm graded crushed stone aggregates) as in foundation filling and mass concretecomplete all as specified and directed. |
| 20 | PCC 1:2:4 (nominal mix) type B-1(using 20mm graded crushed stone aggregates) as in coping of pole including necessary form work complete all as specified and directed. |
| 21 | High performance IP66, 70W LED Street Light fixture with housing made of die cast aluminum with street optic lens and glass diffuser for uniform light distribution and inbuilt Surge Protection Device (SPD) suitable for bracket of dia Ø 35/40 mm on existing poles with k=6500K complete all as specified and directed.Make: Havells Cat Part No : ENDURASUNDOWNSL70WLED765PASYBOTG or Bajaj Cat Part No - NEXO 84L WH PO PC SD or Orient Cat Part No : LSFT-070-C |
| 22 | Street light bracket made out of GI pipe 32mm dia medium grade GI Pipe minimum 1.5 Mtr long including fixing with 02 Nos MS clamps made out of flat iron of size 30mm x5 mm with nut bolts and washer incl painting work complete all as specified and directed complete all as specified. |
| 23 | Taking down oldStreet Light fittings including bracket of any make or any capacity from the after disconnecting the electric connection carefully and refixing the same complete all as directed. |
| 24 | 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathedin service connections,Size of conductor 6 Sqmm, 2 core solid conductor complete all as specified |
| 25 | SMC cable junction box of size 200x140x95mm suitable for street light/PTL, square type , weather proof , IP-54 including fixing of 10Amp MCB SP and clamps , nuts , bolts , washers suitable for fixing to pole/GI pipes including suitable arrangement for cable entry and exit with 2 run of 1.5 sqmm FRLS flexible cable laying through PVC conduit from junction box to street light fitting complete all as specified and directed.Make : Sintex Cat Part No. GSJB-2014 or its equivalent approved make. |
| 26 | Dismantling steel poles/ struts, any size and removing to MES Store yard, complete all as specified. |
| 27 | Dismantling stay assembly complete and removing to MES store yard, complete all as specified. |
