|
| 1 | Excavating over areas, n exc1.5 m deep and getting out in any type of soil complete all as specified and directed |
| 2 | All as per item No.01 here-in-before, but height exc.1.50 M but n.exc. 3.00 M.complete all as specified and directed |
| 3 | Excavation in trenches n exc. 1.5m wide & n exc. 1.5m in depth for foundation etc. and getting out in soft / loose soil. complete all as specified and directed |
| 4 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed |
| 5 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed |
| 6 | Taking down cement plaster on brick or stone walls etc, including racking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed |
| 7 | Material and labour PCC 1:3:6 type C-1 (using 40 mm grraded stone aggregate) as in surface channels and drains complete all as specified and directed |
| 8 | Material and labour Fly ash brick75 kg/cmsq compressive strength old size ,straight or curved on plan exc. 6 metre mean radius built in cement mortar 1:4 complete all as specified and directed |
| 9 | Material and labour 10mm thick rendering in cement mortar 1:4, on fair faces of brick work finished fair andeven complete all as specified and directed |
| 10 | Material and labour Neeru finish to plastering and concrete surfaces complete all as specified and directed |
| 11 | Material and labour for RCC(1:2:4), type B1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed |
| 12 | Material and labour TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 13 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick for flat surfaces (Horizontal or sloping) complete all as specified and directed |
| 14 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete rail ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide fair finished complete all as specified and directed |
| 15 | Material and labour PCC 1:2:4 type B-2 (using 40 mm grraded stone aggregate) as in surface channel and drain,rounded and chamfered edges surface even and smoothcomplete all as specified and directed |
| 16 | Material and labour PCC 1:2:4 type B1 using 20 mm graded stone aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs like including form work ,weathering, slightly rounded or chamfered angles and throating,complete all as specified and directed |
| 17 | Material and labour Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed. |
| 18 | Material and labour for 100 mm thick PCC 1:2:4 Type B-2 (40mm graded agg ) ,as in top layerincluding spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed |
| 19 | Material and labour for 150mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed |
| 20 | Material and labour for 150mm Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in complete all as specified and directed |
| 21 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed |
| 22 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting pointcomplete all as specified and directed |
| 23 | Material and labour for preparation of newly plastered suface and applying two coat of cement base paint over a coat primer complete all as specified and directed |
| 24 | Excavation in any type of soil for post holes (or similar holes) n.exc 0.5Cum getting out, removing surplus soil to a distance nexc 50m and making good surface in soft/loose soilcomplete all as specified and directed |
| 25 | Material and labour for PCC 1:3:6 type C1 using 40mm graded stone aggregate as in foundationfilling and mass concrete complete all as specified and directed |
| 26 | Supply and Fix framed work such as grill, grating , etc, with end of bars shouldered and/or riveted,or forget in to spikes,framed guard bars,flat iron,angel,barred iron doors,ladder,framed balusters,walk ways,railings,framework of water tanks and and similer work GDE Fe-410-0 or Fe-310-0,complete all as specified and directed |
| 27 | Supply and Fix mild steel Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed |
| 28 | Supply onlyChain link MS galvanised fencing,size 4\" x 4\"and dia of wire 4mmcomplete all as specified and directed |
| 29 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire,tighteningcomplete all as specified and directed |
| 30 | Material and labour mild steel round bar 10mm dia cut to length bent to shape required including cranking bending spirally for hooping and for strainingchain link fencing complete all as specified and directed |
| 31 | S & Fmild steel screw bolts (machine made) 11mm to 15 mm dia with hexagonal or square heads at one end and screwed the other,or screwed both ends,each screwed end to be fitted with washers and one hexagonal or square nut,exc 5cm but n exc 10cm longcomplete all as specified and directed |
| 32 | Material and labour for preparation of untreated new surfaces of steel and iron work exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer,complete all as specified and directed |
| 33 | Material and labour for spreading dry river unwashed sand in trenches for cable cushioning complete all as specified and directed |
| 34 | Supply and laying factory made unreinforced precast concrete cable cover class LV, Type 1 flat size 250mm x 150mm x 40mmcomplete all as specified and directed |
| 35 | Supply, laying & testing cable XLPE insulated screened PVC beded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts grade LT cable of size 70 Sqmm 3.5 Core. complete all as specified and directed |
| 36 | Material and labour for plate earthing with galvanised mild steel plate electrode 600mm x 600mm x 6mm thick buried directly in ground vertically (in earth pit not less than 2.25m below normal ground level) withthe top edge of the earth plate at a depth not less than 1.5m below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and incl GI earth strip 32x6 mm bolted (with GI nuts, bolts & check nuts) and reveted to earth plate at one end and connected to metallic bodies of HT/LT equipments etc at the other end including 40 mm GI light grade pipe with all fittings from top of electrode to body of equipment fixed with iron clamps, bolts, nuts and washersand also including providing watering pipe 20mm bore GI pipe medium grade from bottom of earth pit to top of elctrode complete with earth pit in PCC 1:2:4 type B-2 using 12 mm graded crushed stone aggregate and RCC cover complete all specified and shown in electrical plate No 3 of SRR Pt-I.The scope of work also includes necessary excavation and earthworkcomplete all as specified and directed |
| 37 | Supply, installation, commissioning and testing of acoustic enclosure Diesel Engine Generating set 35 KVA/28 KW (CPCB IV+), 415 Volt, 0.8 lagging power factor 50 HZ, 1500 RPM, self excited self regulated brush less AC generator mounted on common base plate with relay panel for automatic starting on mains failure (AMF) complete with fuel tank, battery and standard accessories and fittings including acoustic enclosure suitable for ambient condition at Amla (M.P.) and confirming to condition under IS/IEC 60034-1, ISO 1460, ISO 8528, ISO 3046, ISO 9001, ISO 13018 and all components as detailed complete all as listed as following including PCC foundation as per manufacturer recommendation 300mm of thick PCC (1:2:4, M-20 grade) foundation height shall be above the ground level:-(i) The capacity of Generator set shall be net after all due de-rating factors as per relevant IS design.(ii) The quoted rate shall be deemed to be inclusive of first fill of oil and final successful acceptance test.(iii) The quoted rate shall be deemed to be inclusive load test of DG set at site, fuel Oil and load etc shall be arrange by the contractor without any extra cost. |
| 38 | (a) Engine: Diesel engine 1500 RPM of 53.1 BHP or as recommended by manufacturer, water cooled, conform to IS-10000, overload capacity of 10% for one hour in every 12 hours of continuous run, 12 volts electric battery start, complete with fly wheel and torsional vibration damper, radiator and all standard fittings/fixtures as per standard manufacturing practices and battery charging ammeter and fuses, and also including self starter (12V) battery charging alternator complete.(b) Alternator: AC alternator, brushless, 415 V AC 50 Hz, 3 phase, 4 wire type, rated for continuous output of 35 KVA at PF 0.8, 1500 RPM, insulation class \"H\" enclosure SPDP (IP 23), self excited & self regulated with AVR for +1% voltage regulation, conform to IS-4722, overload capacity of 10% for one hour in every 12 hours of continuous run, coupled directly/suitably to and to match the above engine. |
| 39 | c) Enclosure: Provision of an integral type, approved/certified acoustic enclosure as per CPCB-IV complaint, for the DG set to restrict the noise level to 75 dbA at one metre and ensure that temperature rise within the canopy shall not exceed 5-7 degree celsius, shall be made of 16 SWG CRCA MS sheet with powder-coated finish on outside and provided with non igniting fire retardant foam as acoustic material. There shall be four hinged doors out of which one shall be with glass window and base frame shall be of ISMC.Notes: Unit rate quoted by the tenderer shall deemed to be inclusive for the following:-(i) The contractor shall provide the artificial load, fuel, oil etc for testing the DG set at site and the cost its deemed to include in the quoted rate.(ii) All civil works for making good the disturbed surface during installation.(iii) The DG Set should comply with all the latest CPCB-IV + Norms.(vi) The capacity of DG set shall be net after all derating factors as per relevant IS design. |
| 40 | Material and labour for GI pipe light grade size 50 mm dia with necessary fittings laid in trenches/fixed to pole as cable protection including MS clamps etccomplete all as specified and directed |
| 41 | LT Panel made out of CRCA sheet 3.15 mm thick outdoor pedestal type CPRI approved, totally enclosed with front and rear opening, hinged doors with projected an raised platform of suitable size weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, strickering of switch gear about termination of switch gear, and the nuts/ bolts etc used are to be made of rust proof material incl as per IS: 613 (2000) copper bus bar with insulators suitable for three phase and four wire LT AC, 50 Hz 415 V, 200 A capacity complete with powder coating, necessary internal electric connection as required and provision of the following: (Main Panel )Incoming:(a) MCCB 4 Pole, 415 V, 36 kA (ICS=ICU=ICW for 1 Sec), with magnetic release capacity 100 Amps, with adjustable type overload protection, short circuit protection - 01 No(b) Onload Changeover switch 100 Amps.Outgoing:(c) MCCB 3 Pole, 415 V,16 kA (ICS=ICU=ICW for 1 Sec), with thermal releaseof capacity 63 Amps, with fixed type overload & short circuit protection - 03 Nos (d) Intelligent Panel meter to measure voltage, current, frequency, power factoretc with all connected CTs of each breakers(e) LED Indicating Lamps for each phase with colour code Red Yellow Blue for R, Y and B Phases for each breakerscomplete all as specified and directed |
