Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (un-reinforced) of any description & in any position not specifically providedcomplete including dismantling of floor tiles etc complete all as specified. |
| 2 | Demolition of Stone slabs and tiles of any description or thickness laid bedded and pointed in any mortarin floors, aprons etc. |
| 3 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises. |
| 4 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified. |
| 5 | M&L for cement concrete(1:2:4) type B-0 (using 12.5 mm graded stone aggregates) 25 mm thick as in sub base of flooring/tiles etc completeall as specified. |
| 6 | M&L for Cement concrete 1:5:10 type E-2 using 40mm graded brick aggregates as in sunken portion of Bath/WC etc complete all as specified. |
| 7 | M&L for rendering 15 mm thick in CM (1:3) mixed with water proofing compound @ 3% by weight of cement finished even and smooth without using extra cement in sunken portion of toilet including applying first layer of cement slurry @ 0.488 Kg/Sqm mixed with Acrylic based polymer modified cementitous composite compound @ 0.253 Kg/Sqm (the layer shall be allowed to air cure for 4 hours followed by water curing for 48 hours). 2nd layer acrylic based polymer modified cementious composite compound slurry after air of 1st coat for 4 hours, as per manufacturer\"s instruction complete all as specified Note: WPC will be measured and paid separately. |
| 8 | M&L for PCC 1:2:4 type B1 (using 20mm graded stoneaggregates) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified. |
| 9 | M&L for screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:6)for bedding of tilescomplete all as specified. |
| 10 | M&L 10 mm thick rendering in cement mortar (1:4) on vertical surfaces for backing of tiles etc complete all as specified. |
| 11 | M&L for screed bed or bedding layer of mortar 20 mm thick in cement mortar (1:4)for bedding of tilescomplete all as specified. |
| 12 | M&L for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified. |
| 13 | M&L forNon - skid (joint free) coloured Ceramic tiles 7 to 8 mm thickarea of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified. |
| 14 | M&L for Glazed ceramic colouredtiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified. |
| 15 | M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified. |
| 16 | M&L Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to mtach the shade of the slab including rubbing and polishing complete all as specified. |
| 17 | M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite complete all as specified. |
| 18 | Providing edge moulding to 18-20 mm thick stone(any description) of counters vanities etc, including machine polishing to edge to give high gloss finish etc. Complete to Granite stone any description. |
| 19 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition ) of any description in any position not specifically provided completecomplete all as specified. |
| 20 | M&L for providing reinforced cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as inSlabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified. |
| 21 | M&L for providing reinforced cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as inchajjas complete all as specified. |
| 22 | M&L for providing reinforced cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in fins, fascias, louvres, parapets, and railings exc. 60 cm in height, newels, balustrade, and the like complete all as specified. |
| 23 | M&L for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified. |
| 24 | All as per item No.23 here-in-before but 6 mm dia to 8 mm dia |
| 25 | M&L Formwork to soffits of suspended slabs such as roof slabs, floorslabs, landings and similar work not exceeding 200 mm thick rough finishedin flat surface complete all as specified. |
| 26 | M&L Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete rail ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon tal or sloping and similar work exc 5 cm but n exc 10cm wide rough finished complete all as specified. |
| 27 | M&L Formwork to fins, louvers, fascia/parapet wall rough finishedin flat surface complete all as specified. |
| 28 | M&L for guniting work to RCC work in column, flooring, side walls, beam, slab, etc by removing loose concrete cover etc, cleaning of surface with wire brush and applying epoxy paint to rusted reinforcement and S&F welded wire mesh fabric or wire net less than 95 X 95X 3 mm adhesive, plaster grade for concrete admixture 1 part of cement and 3.5 part of sand and average thickness 40 mm and making the surface even including 15mm thick plastering in cement mortar (1:4) on brick or concrete surfaces including finishing the surfaces even and smooth, without using extra cement plumb and making surface true to geometry in line and including necessary form work to be carried at upto doublestorey building Note.- Where ever reinforcement required will be measured and paid seperatly etc complete all as specified. |
| 29 | Demolition of Mud in roofs, any thickness including plastering and leeping,(whether full thickness removed etc complete all as specified. |
| 30 | M&L providing, cement concrete (1:2:4)type B-0 (Using 12.50mm graded stone aggregate) as in roof padding, sub base of floor, coping or roof kerbs on roof chamfered on edge rounded or chamfered on edges including trowelling slightly complete all as specified & as directed. |
| 31 | M&L for 15 mm thick plaster in cement mortar (1:4) mixed with water proofing compound on roof slabs finished even and smooth (without using extra cement) after cleaning of roof surfaces with wire brushes complete all as specified.Notes : WPC shall be measured and paid seperately. |
| 32 | M&L for water proofing treatment with minimum 3mm thick APP (Atactic Polypropylene) modified polymeric prefabricated five layer membrane over roof consisting of cleaning of concrete or plaster surface of roof & parapet walls and applying evenly a bitumen primer confirming to IS 3488 @ 0.40 Kg per sqmlaid using buten torch and sealing all joints of APP modified polymeric water proofing membrane minimum weight 3.6 kg/sqm reinforced with non woven polyester fabric (weight not less than 160 grams per sqm) unrolled and bonded to substrata with logitudinal and end laps 100 mm and 150 mm respectively as per manufacturer\"s instructions including aluminium paint on top surface complete all as specified. |
| 33 | Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified. |
| 34 | M&L for Cement concrete tiles 25cm x 25cm x 22 mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished, set with grey cement and pigments, complete all as specified and directed. |
| 35 | Removingbldgs demolished materials / debries exc. 1.50 km but n exc. 5 km and depositing where directed. |
| 36 | Demolition of brick work or rubbled stone masonry including all quoins arches, pillars, precast concrete etc built in cement mortar and including removal from the site complete all as specified. |
| 37 | M&L for brick work with sub class \"B\" old size brick, straight or curved on plan exc 6.0 mtr mean radius built in cement mortar 1:6 etc complete all as specified. |
| 38 | M&L for half brick work with sub class \"B\" old size brick, straight or curved on plan exc 6.0 mtr mean radius built in cement mortar 1:4 etc complete all as specified. |
| 39 | M&L for rendering 15 mm thick in cement mortar (1:6) onbrick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified. |
| 40 | M&L for 15 mm thick plastering in two layers (10+5) mm in cement mortar (1:4) on brick or concrete surfaces including rendering on fins, fascias, chajja, parapets etc and finishing the surfaces even and fair (without using extra cement), top layer shall be with WPC as per manufacturer\"s instruction and complete all as specified.Note: WPC shall be measured and paid separately. |
| 41 | M&L rendering 10mm thick in cement mortar (1:3) as in ceilings finished even and smooth (without using extra cement) complete all as specified. |
| 42 | Supply only intergral water proofing compound ISI Marked complete all as specified. |
| 43 | M&L for preparation ofnewly plastered or unplastered/ undecorated surface of wall and applying two or more coat distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre over a coat of primer, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification complete all as specified. |
| 44 | M&L for preparation of plastered or unplastered old decorated surface of wall by complete removal of existing treatment by mechanised sander of berger paints or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and filling of holes and cracks with with suitable material like cement or plaster of paris etcand thereafter applying two or more coat distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre over a coat of primer, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification complete all as specified. Note : (a) Stage for Preparation of surfaces shall be got approved from Engg-In-Charge before applying the finishes.(b) Material shall be procured from manufacturer and work shall be got executed through authorised applicator. |
| 45 | M&L for preparation ofnewly plastered or unplastered/ undecorated surface of ceiling and applying two or more coat distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of primer, complete, as per manufacturer\"s specification complete all as specified. |
| 46 | M&L for preparation of plastered or unplastered old decorated surface of ceiling by complete removal of existing treatment by mechanised sander of berger paints or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and filling of holes and cracks with with suitable material like cement or plaster of paris etcand thereafter applying two or more coat distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre over a coat of primer, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification complete all as specified. Note : (a) Stage for Preparation of surfaces shall be got approved from Engg-In-Charge before applying the finishes.(b) Material shall be procured from manufacturer and work shall be got executed through authorised applicator. |
| 47 | M&L for preparation of newly plastered surfaces of wall and applyingTwo or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified. |
| 48 | M&L for preparation(complete removal of existing treatment) of old decorated external wall/ceiling surface of existing treatment by scrapping with Trucare Wall Sander : L-01/H-01 (having mechanical vaccum mechanism) having RPM not less than 1500, sand pad of 80 grit having dia of 7\"/9\" to make the surface free from dust, loose paint etc or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applyingTwo or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on wall/ceiling surface including filling of holes and cracks with with suitable material like cement or plaster of paris etcthus make surface smooth upto 4th storey buildings complete all as specified and as directed. Note : (a) Stage for complete removal of existing surface & Preparation of surfaces shall be got approved from Engg-In-Charge before applying the finishes.(b) Material shall be procured from manufacturer and work shall be got executed through authorised applicator. |
| 49 | Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each, including cutting holes for removing the hold fast etc (Distrubed surface of wall shall be make good by the contractor. The rate quoted shall be deemed included for the same) complete all as specified. |
| 50 | Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4 Sqm each, including cutting holes for removing the hold fast etc (Distrubed surface of wall shall be make good by the contractor. The rate quoted shall be deemed included for the same) complete all as specified. |
| 51 | Taking down shutter of any description exc 1 Sqmand n exc 2 Sqm and removing from site. |
| 52 | Taking down shutter of any description exc 1 Sqmand n exc 2 Sqm and refixing in same opening. |
| 53 | S&F forPressed steel frames 125X60mm (made out of 1.25 mm thick MS Sheet) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified. |
| 54 | S&F forPressed steel frames 105X60mm (made out of 1.25mm thick MS Sheet) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified. |
| 55 | M&L cement concrete (1:2:4) typeB1,(using 20 mm graded stone aggregate) as in filling of door frames of pressed steel and in bed blocks etc complete all as specified. |
| 56 | S&F factory made 35 mm thickflush shutters , solid core construction with block board core and plywood face pannel commercial type on both faces complete all as specified. |
| 57 | S&F factory made 35mm thick 2nd class hardwood glazed and skelton door shutters, open rebated and prepared to receive glass, gauze, (without sash bars) edges for framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-1 section 8 clause 8.24 (a) fitted to chowkats complete all as specified. |
| 58 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 59 | S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 60 | S&F 100 mm Butt hinges, Stainless steel and fixed complete all as specified. |
| 61 | S & F Continuous (piano) hinges,30mm width of flaps (when open) mild steel, bright finish or electrogalvanised complete all as specified. |
| 62 | S&F 200mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified. |
| 63 | S&F 150 mm size extruded aluminium alloy handles fabricatedtype anodised and fixed. |
| 64 | S&F 250 mm long aluminium alloyanodised sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast sections or cast aluminium alloy complete all as specified. |
| 65 | S&F in repair Double legged Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 140mm, complete all as specifed and direcetd. |
| 66 | S&F in repair 300mm, ordinary rat tailmade of mild steel rod pattern springsincluding roller androller plate complete |
| 67 | S&F door seal bottom with aluminium plate and rubber insulation 42\"\" x 1.5\"\" complete all as specified. |
| 68 | M&L for preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified. |
| 69 | S&F powder coated anodized aluminum frame for partition, doors, windows, ventilations with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 70 | S&F powder coated Anodised aluminium window and ventilator shutters, fixed/side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified. |
| 71 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge. |
| 72 | S&Ffor 4.80 mm thick sheet glass ordinary quality and glazingeach pane n exc 0.50 Sqm fixed with neoprenerubber gasket in aluminium frame work complete all as specified. |
| 73 | S&Ffor 4.80 mm thick frosted glass ordinary quality and glazingeach pane n exc 0.50 Sqm fixed with neoprenerubber gasket in aluminium frame work complete all as specified. |
| 74 | S&FStainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple including necessary beading complete all as specified. |
| 75 | Dismantling boarding of any description , fixed in any position with nails complete all as specified and as directed. |
| 76 | Supply & Fixing of 18 mm thick Rajshri 100% solid WPC (Wood Polymer Composite) plain board (minimum density 650 Kg/Cum) fixed with screws, solvent cement/adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per specifications and as directed by Engr-in-Charge. |
| 77 | Supply & Fixing of 18 mm thick Rajshri 100% solid WPC (Wood Polymer Composite) of (minimum density 650 Kg/Cum) of one side Prelam/Rigidlam and other side balancing laminate colour to make kitchen cabinet shutter/drawer front shutters complete as per specifications and as directed by Engr-in-Charge. |
| 78 | Supply & Fixing of 6 mm thick Rajshri 100% solid WPC (Wood Polymer Composite) plain white board (minimum density 650 Kg/Cum) fixed with screws, solvent cement/adhesive to make wall mount kitchen cabinet back and pull out drawer sides completeas per specifications and as directed by Engr-in-Charge. |
| 79 | Supply & Fixing of auto closing hinges openable at 0 degree for kitchen cabinet shutters complete all as specified and as directed. |
| 80 | Supply & Fixing of stainless steel handles 100 mm size for kitchen cabinet/ cupboard shutters complete all as specified and as directed. |
| 81 | S&F 75 mm Butt hinges, Stainless steel and fixed complete all as specified and as directed. |
| 82 | S&F 150 mm tower bolt, Stainless steel and fixed complete all as specified and as directed. |
| 83 | Dismantling of cast ironpipe up to 100 mm dia, jointed in cement mortar and taking out in trenches/Wall if required etc complete all as specified and as directed. |
| 84 | S&F110 mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls complete all as specified and as directed. |
| 85 | S&F110 mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints laid in trenches or floor complete all as specified and as directed. |
| 86 | S&F75 mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls complete all as specified and as directed. |
| 87 | S&F75 mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints laid in trenches or floor complete all as specified and as directed. |
| 88 | S&F75 mm dia PVC (SWR) vent cowl complete all as specified and as directed. |
| 89 | S&F110 mm dia PVC (SWR) vent cowl complete all as specified and as directed. |
| 90 | S&F 110 mm dia PVC (SWR) bends with rubber rings joints fixed as required complete all as specified and as directed. |
| 91 | S&F 75 mm dia PVC (SWR) bends with rubber rings joints fixed as required complete all as specified and as directed. |
| 92 | S&F 110 mm dia PVC (SWR) branch piece, single (single Y) equal or unequal with rubber rings joints fixed as required complete all as specified and as directed. |
| 93 | S&F 75 mm dia PVC (SWR) branch piece, single (single Y) equal or unequal with rubber rings joints fixed as required complete all as specified and as directed. |
| 94 | S&F 110 mm dia PVC (SWR)junction single, (Single T) equal or unequal with rubber rings joints fixed as required complete all as specified and as directed. |
| 95 | S&F 75 mm dia PVC (SWR)junction single, (Single T) equal or unequal with rubber rings joints fixed as required complete all as specified and as directed. |
| 96 | S&Fin repair 50 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints including bend, tee, laid in trenches/ floors/walls complete all as specified and as directed. |
| 97 | S&F in repair Salt-glazed stoneware gully traps (150X150) mm, square or round mouthed, type \"P\" complete all as specified and as directed. |
| 98 | M&L in replacement PVC (SWR) 75 mm floor trap plainwith grating includingjointing with solventcementcomplete all as specified and as directed. |
| 99 | S&F PVC (SWR) \"P’ trap 125 mm complete all as specified and as directed. |
| 100 | S&F110mm PVC (SWR) WC connector bent type complete all as specified and as directed. |
| 101 | Taking up or down steel tubing 15mm bore and connection including cleaning for refixing or removal to store. complete all as specified and as directed. |
| 102 | All as per item No. 101 here-in-before but 20mm dia complete all as specified and as directed. |
| 103 | Cutting chases, pinning in. making good to facings where required andpointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girthin brick wall etc complete all as specified and as directed. |
| 104 | S&F tubes medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors 20 mm dia bore pipe (including in short length) complete all as specified and as directed. |
| 105 | S&F tubes medium grade galvanized with all fittings complete laid in trenches 20 mm dia bore pipe complete all as specified and as directed. |
| 106 | Supplying and laying of 25mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed. |
| 107 | Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed. |
| 108 | Supply and fixing in CPVC 20mm Brass Elbow complete all as specified and as directed. |
| 109 | Supply and fixing in CPVC 20mm Brass Tee complete all as specified and as directed. |
| 110 | Supply and fixing in CPVC 20mm Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and as directed. |
| 111 | Supply and fixing in CPVC 20mm Female Brass Threaded Adaptor (FTA/ FBTA) complete all as specified and as directed. |
| 112 | Supply and fixing in CPVC 25mm Tank Adaptor complete all as specified and as directed. |
| 113 | Supply and fixing in CPVC 20mm Union complete all as specified and as directed. |
| 114 | Supply and fixing in CPVC 25mm Union complete all as specified and as directed. |
| 115 | Supply and fixing in repair CPVC 20mm Ball valve complete all as specified and as directed. |
| 116 | Supply and fixing in repair CPVC 25mm Ball valve complete all as specified and as directed. |
| 117 | S&F in repair white vitreous China wash down water closet pan (pedestal pattern), and trap(excluding fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, etc.complete all as specified and as directed. |
| 118 | S&F in repairvitreous china pedestal pattern wash hand basin (flat back) white of size 550x400mmincluding one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector,including cutting for and pinning in ends of brackets complete all as specified and as directed. |
| 119 | S&F in repairs PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic actiontype with inlet ball valve and float, handle with & including bracket andPVC flush pipe 32 mm borecomplete all as specified and as directed. |
| 120 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections andmixed in position complete all as specified and as directed. |
| 121 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 122 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. |
| 123 | S&F in repair Soap dish ofchromium plated or stainless steel fixed to wall with chromium plated brass screws complete all as specified and directed.. |
| 124 | S&F in repair PVC connection 450 mm long suitable for 15 mm GI pipe with two brass nuts & rubber washers complete all as specified and directed.. |
| 125 | S&F in repair Snow white vitreous China wash down water closet pan with Flushing Cistern in one piece (pedestal pattern) of size 660x350x745mm S trap 220mm including slim soft close seat cover complete all as specified and directed. |
| 126 | S&F in repair Wall mixer with bend pipe for overhead shower with built-in non return valve , 15mm bore chromium plated fancy type complete all as specified and directed. |
| 127 | S&F in repair Sink mixer (wall mounted) with 170 mm (6.5\") long swivel spout, connecting legs and wall flanges, 15mm bore chromium plated fancy type complete all as specified and directed. |
| 128 | S&F in repair Overhead Rain shower 200 x 200 mm in square shape sleek design with sleek looks , 15mm bore Stainless steel body complete all as specified and directed. |
| 129 | S&F in repair Pillar cock with swan neck spout (left/right) and aerator , 15mm bore chromium plated fancy type complete all as specified and directed. |
| 130 | S&F in repair angular two way angle cock with wall flange, 15 mm nominal bore cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed. |
| 131 | M&L in repair for 15 mm dia stop valve/angle valve, cast copper alloy screwed down high pressure, fancy type chromium plated screwed both ends for iron pipe or unions complete all as specified and directed. |
| 132 | S&F in repair bib tapslong body,brass, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket with water saving aerator complete all as specified and directed. |
| 133 | S&F in repair chromium plated shower roses 125 mm size with or without swivel joints of standard size including fixing to 15mm steel pipe or union complete all as specified and directed. |
| 134 | S&Fin repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including one number chromium plated waste fittings 40 mm dia & waste pipe complete all as specified and as directed. |
| 135 | S&F in repair kitchen plate rack stainless steel 1 mm thick of size 60cm X 75 cm complete fixed to brick/concrete wall, with screw including rawl plugcomplete all as specified and as directed |
| 136 | S&F in repair Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified. |
| 137 | Dismantling of existing water tanks of steel/PVC/AC of capacity exceeding 250 liters but not exceeding 500 litres complete all as specified and as directed. |
| 138 | S&F for rotational moulded polyethylene water storage tanks 500 ltrs capacity (cylinderical verticalwith closed top) hoisted and fixed in position all as per SSR Part I complete all as specified and as directed. |
| 139 | S&F for rotational moulded polyethylene water storage tanks 1000 ltrs capacity (cylinderical verticalwith closed top) hoisted and fixed in position all as per SSR Part I complete all as specified and as directed. |
| 140 | S&F in repair ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 20 mm bore and fixed, minimum weight of float valve 210 gms complete all as specified and as directed. |
| 141 | M&L for preparation of old painted surfaces of wood & wood based of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 142 | M&L for preparation of old painted surfaces of steelof any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 143 | S&F in repair 25 mm outer dia medium weight pipe made out of stainless steel 304 grade, includingdecorative ornamental knobs at both ends and one set of ornamental decorative Stainless steel clamps tofixed towalls complete all as specified and as directed. |
| 144 | S&F 15 mm outer dia stainless steel rode 1mm thick, withbracket for ward robe including full threaded steel screws complete all as specified and as directed. |
| 145 | S&F in repair 100 mm chromium plated grating complete all as specified and as directed. |
| 146 | M&L Cutting holes not exc. half brick in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and as directed. |
| 147 | Dismantling wrought iron or mild steel work of any description complete all as specified and as directed. |
| 148 | S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 149 | S&F Hard drawn steel wire fabric weight per square metre n. exc 4kg cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed complete all as specified and as directed. |
| 150 | S&F rolled mild steel in framed work as in doors or steel gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing conforming to Fe- 290.Gde-E-165 complete all as specified and as directed. |
| 151 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and as directed. |
| 152 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified & directed. |
| 153 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with selftapping screws complete all as specified and as directed. |
| 154 | M&L prepration of new Steel surfaces of any description, not otherwise described, over 10cm width or girth & applying two coats of synthetic enamel paint over coat of red oxide primer complete all as specified and as directed. |
| 155 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed. |
| 156 | S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 157 | S&F in repair stainlees steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks, wire staples or beading etc, complete all as specified and as directed. |
| 158 | S&F in repairaluminium anodised, barrel tower bolt of extruded section and fixed, 150mm long (ISI marked), complete as specified and directed. |
| 159 | S&F in repair aluminium anodised, barrel tower bolt of extruded section and fixed, 200 mm long (ISI marked), complete as specified and directed. |
| 160 | S&F in repair aluminium alloy, 300mm long anodised, sliding door bolt with hasp, staple (bolt type) with and fixing clips of sheet, cast or excluded sections and fixing bolts and sliding bolts of excluded sections or cast aluminum alloy and fixed, complete all as specified and as directed. |
| 161 | S&F in repair 75mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws,complete all as specified and directed. |
| 162 | S&F in repair Aluminium alloy handle fabricated type anodised, 150mm long (ISI marked), complete as specified and directed. |
| 163 | M&L for 75 mm thick cement concrete type D-2 1:4:8with) using 40 mm graded stone aggregates) asin sub base of flooring etc complete all as specified and as directed. |
| 164 | M&L sand filling under interlocking tiles for cushioning including watering and consolidation complete all as specified and as directed. |
| 165 | M&L for machine presssd pre-cast coloured concrete interlocking paver block any shape confirming to IS-15658-2006 of 60mm thick , M-35 Grade with grey cement and pigment as approvedcomplete all as specified and as directed. |
| 166 | Demolition and breaking up drain pipes of dia 200mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and as directed. |
| 167 | Excavation of soft/loose soil in trenches not exc 1.5 meter wide & not exc 1.5 mtr in depth for foundation etc or for manholes, laying of pipe and getting out complete all as specified and directed. |
| 168 | Excavation of hard/dense soil in trenches not exc 1.5 meter wide & not exc 1.5 mtr in depth for foundation etc or for manholes, laying of pipe and getting out complete all as specified and directed. |
| 169 | M&L for plain cement concrete type B2 (1:2:4) (Nominal Mix) using 40mm graded stone aggregate as in foundation and mass concrete complete all as specified and directed. |
| 170 | Material and labour for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in benching and haunching including necessary form work complete all as specified and as directed complete all as specified & as directed. |
| 171 | Material & labour for RCC (1:2:4) type BI (using 20mm graded stone aggregate) as in precast cement concrete for cover slab set in cement mortar (1:6) with necessary form work complete all as specified and as directed complete all as specified & as directed. |
| 172 | Material & labour for Reinforced concrete pipes class NP2 , laid and jointed complete with collars 200mm bore complete all as specified & as directed. |
| 173 | Material and labour for plain cement concrete 1:3:6, type C-2 using 40mm graded stone aggregate to drain pipes incl forming cradles for 200 mm NP2 pipes complete all as specified and as directed. |
| 174 | Removing excavated material (soil) not exceeding 50 m and depositing where directed at a level n.exc 1.50 m above the starting point complete all as specified and as directed |
| 175 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm as in soft/loose soil complete all as specified and as directed |
| 176 | Cutting in to existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required (200 mm) bore complete all as specified and as directed |
| 177 | Supply and fixing mild steel round bar 10mm dia and over cut to length bend to shape required including cranking bending hooking end etc including MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed as in rungs Fe-410 W (Gde E 250) quality A or Fe 290 (Gde E 165) complete all as specified and as directed. |
| 178 | M&L for brick work with sub class ‘B’ bricks old size straight or curved on plan exc 6.0 m mean radius built in cement mortar (1:4) complete all as specified and as directed. |
| 179 | Desludging of manholes mechanically by removing all loose materials and sludge and cleaning the same with water by Jet Machineand removal of sludge/silt/liquid/mud and sand (in foul position) etc outside the MOD land ,depth of manholes not exc 1.00 mtr complete all as specified and directed. |
| 180 | Desludging of manholes mechanically by removing all loose materials and sludge and cleaning the same with water by Jet Machineand removal of sludge/silt/liquid/mud and sand (in foul position) etc outside the MOD land ,depth of manholes exc 1.00 mtr but n exc 2.0 mtr complete all as specified and directed. |
| 181 | Cleaning and desludging of existing sewage line of 100 mm to 200 mm bore and depth up to 2.00 mtr from manhole to manhole complete desludging by means of mechanically (Jet Machine) and removal of sludge/silt/liquid/mud and sand (in foul position) etc out side the MOD land including testing of drains by filling the pipes with water complete all as specified and directed. |
| 182 | Dewatering of soak well by means mechanically 2.4 mtr dia and 6 mtr depth complete all as specified and directed. |
| 183 | Desludging of septic tanks (25 users)mechanically by removing all loose materials and sludge and cleaning the same with water by Jet Machineand removal of sludge/silt/liquid/mud and sand (in foul position) etc outside the MOD land complete all as specified and directed. |
| 184 | S&F tubes medium grade galvanized with all fittings laid in trenches 25 mm dia bore pipe complete all as specified and as directed. |
| 185 | S&F tubes medium grade galvanized with all fittings laid in trenches 40 mm dia bore pipe complete all as specified and as directed. |
| 186 | S&F tubes medium grade galvanized with all fittings laid in trenches 50 mm dia bore pipe complete all as specified and as directed. |
| 187 | M&L for taking up or down steel tubing an dconnections including cleaning for refixing or removal to store existing GI tubing 25mm bore complete all as specified and as directed. |
| 188 | M&L for taking up or down steel tubing an dconnections including cleaning for refixing or removal to store existing GI tubing 50/40mm bore complete all as specified and as directed. |
| 189 | M&L in replacement of Gun metal globe or gate valve (ISI Marked), with iron wheel head, screwed both ends, suitable for 20mm bore iron pipe and fixed including testing complete all as specified and as directed. |
| 190 | M&L in replacement of Gun metal globe or gate valve (ISI Marked), with iron wheel head, screwed both ends, suitable for 25mm bore iron pipe and fixed including testing complete all as specified and as directed. |
| 191 | M&L in replacement of Gun metal globe or gate valve (ISI Marked), with iron wheel head, screwed both ends, suitable for 40mm bore iron pipe and fixed including testing complete all as specified and as directed. |
| 192 | Taking down carefully old copper/aluminium point, wiring (light, fan, socket or power) complete, including fitting such as switches, ceiling roses, pendants, regulator socket, etc and removing materials from the site for keeping in safe custody or for taking credit and making good disturbed surface of walls&floors etc as per existing specification complete all as specified and as directed. |
| 193 | Taking down unserviceable MCBDB\"s/AC\"s boxto deposit in store for keeping in safe custody for reuse or takeing in schedule of credit of any size/rating and making good disturbed surface of wall/roofs complete all as specified and as directed. |
| 194 | M&L for concealed point wiring complete with FRLSH grade, PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drawn through in and includingPVC conduit size of not less than 20mm concealed in wall / surface including provn of stove enamelled pressed steel terminal sunken box of suitable size with 3mm thick plastic laminated sheet cover for mounting switch, socket and regulator along with earth wire of FRLSH grade, PVC insulated, unseathed,1100 V grade cable multi stranded copper conductor of size 1.5 sqmm including colour coding of cable shall be Phase- Red, Neutral- Black, Yellow for inverter and Earth-Green and making good to disturbed surface of building to match with existing surface, complete all as specified and as directed. |
| 195 | One light/ fan point controlled by one, one way switch. |
| 196 | One bell/ buzzer point controlled by one bell push switch. |
| 197 | One Socket 3 pin 5 Amps on independent board |
| 198 | One Socket 3 pin 5 Amps on the same board |
| 199 | One light point controlled by two, two way switch. |
| 200 | M&L for concealed point wiring with FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of Size 2.5 sqmm drawn through in and including concealedPVC conduit Size of not less than 20mm concecled in wall / surface including provn of pressed steel terminal boxof suitable Size with 3mm thick plastic laminated sheet cover plate along with earth wire of PVC insulated, unseathed,1100 V grade cable multi stranded copper conductor of Size 2.5 sqmm for 15 Amp socket out let on independent board and making good, disturb surface as it is, all asspecified and directed for the following.Note :- Colour coding of cable should be Phase- Red, Neutral- Black and Earth- Green |
| 201 | S&Ffor switch piano flush type Single pole one way 5 Amps 240 volts with polycarbonate body complete all as specified and directed.. |
| 202 | S&Ffor switch piano flush type two way 5 Amps 240 volts with polycarbonate body complete all as specified and directed.. |
| 203 | M&L for switch piano flush type Single pole One way 15 Amps 240 volts with polycarbonate body complete all as specified and directed.. |
| 204 | S&Ffor socket out let, 6 pin 5 Amps multi purpose 2 in 1 flush type, 230 volts with polycarbonate body complete all as specified and directed. |
| 205 | S&Ffor socket outlet 2 in 1, 5/15 Amps, 6 pin flush type, 240 volts. with polycarbonate body. complete all as specified and directed.. |
| 206 | S&F ceiling fan regulator stepped electronic type 100 watt rating, 230 volts with polycarbonate bodyall as directed. |
| 207 | M&L for bell push flush type Single pole one way 5 Amps 240 volts with polycarbonate body complete all as specified and as directed. |
| 208 | M&L for bell electric heavy duty Ding Dong type 230 volts Single pole complete all as specified and as directed |
| 209 | M&L for ceiling rose bakelite 63x50mm three terminal PVC polycarbonate isolated body complete all as specified and directed |
| 210 | S&F in replacement of environment freindly indoor decorative, 18 watt, LED Aluminium batten with with opal diffuser, operating voltage range 140V to 270V, driver efficiency 88%, lumen efficacy 100 lm/watt with colour temprature 6500K, THD< 20 CRI>80, inbuilt surge protection 2.5 KV , isolation =3.75 and with zero mercury content inlcuding all accessories connecting up from ceiling rose complete all as specified and directed. |
| 211 | S&Fin replacement of environment freindly indoor decorative, 9/10 watt, LED Aluminium batten with with opal diffuser, operating voltage range 140V to 270V, driver efficiency 88%, lumen efficacy 100 lm/watt with colour temprature 6500K, THD< 20 CRI>80, inbuilt surge protection 2.5 KV, isolation =3.75 and with zero mercury content inlcuding all accessories connecting up from ceiling rose complete all as specified and directed. |
| 212 | S&Fin replacement of environment freindly ultra modern energy saving surface mounted decorative 10 watt LED bulkhead fitting modular type with polycarbonated housing, high efficient LEDs with opal diffuser and IP65 protection, lumen efficacy 85 lm/watt with colour temprature 6500K, THD< 20 CRI>80,2.5 KV surge protection connecting up with 03 core flexible cooper conductor cable of suitbale size from ceiling rose complete all as specified and directed. |
| 213 | Disconnecting electric connection and taking down carefully ceiling fan/wall fan/exhaust fan/ aircirculator fan any sweep and removing fan and fan blade to AGE E/M office/ storeyard as directed by Engr-in-Charge. |
| 214 | Supply and fix heavy duty copper wound exhaust fan, steel body AC single Phase, 230V of size 300mm sweep, 1400 RPM, double bearing with 04 Nos blades, and frame and louvers complete with making arrangement for fixing of exhaust fan on steel/aluminum frame window/making opening in brick wall as per site Complete all as specified and directed |
| 215 | Supply and fix ceiling fan complete with blades, down rods, electronic regulator and accessories, 230V, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) Complete all as specified and directed |
| 216 | Supply and fixingin replacement metal plug and socket single pole and neutral with a two pin and earth plug and socket alongwith one single pole MCB of 20 Amp concealed in wall Complete all as specified and directed |
| 217 | Taking down carefully copper/Aluminium submain wiring and removing material from site as directed and making good disturbed surface Complete all as specified and directed |
| 218 | S&F of submain wiring with PVC insulated, unsheathed, multi-stranded, FRLS Grade, copper conductor cable 1100 volts grade drawn through in and including PVC rigid conduit medium grade of not less than 25mm dia with conduit accessories and concealed in wall/surface of ceiling for two runs of 4.0 Sqmm single core FRLS Grade and one runs of 4.0 Sqmm PVC insulated copper conductor for earth continuity wire of green colour including lugs, connected between main DB to Sub main DB and tasted and as complete all as specified and as directed.Note :- (i) Two run of 4.0 Sqmm single core cable with one run of 4.0 Sqmm earth continuity conductor and PVC conduit and accessories will be measured as one length including cutting chasing in wall complete.(ii) Rates are deemed to be included for chases of conduit and sunking for boxes cutting and making holes in wall/floor for passing in or through conduit. |
| 219 | S&F of submain wiring with PVC insulated, unsheathed, multi-stranded, FRLS Grade, copper conductor cable 1100 volts grade drawn through in and including PVC rigid conduit medium grade of not less than 25mm dia with conduit accessories and concealed in wall/surface of ceiling for two runs of 6.0 Sqmm single core FRLS Grade and one runs of 6.0 Sqmm PVC insulated copper conductor for earth continuity wire of green colour including lugs, connected between main DB to Sub main DB and tasted complete all as specified and as directed.Note :- 1.Two run of 6.0sqmm single core cable with one run of 6.0sqmm earth continuity conductor and PVC conduit and accessories will be measured as one length including cutting chasing in wall complete.Note 1: Rates are deemed to be included for chases of conduit and sunking for boxes cutting and making holes in wall/floor for passing in or through conduit. |
| 220 | S&F of double door three phase distribution board 4 way IP43 IK 09 loadline VTPN with 125 amp MCCB to be used as incomer and made out of CRCA sheet 1.60 mm thick, phosphatised powder coated with copper bus bar 250 Amp, 415V, earth stud, Din rail, Polymade terminal blocks for inclming and ougoing circuits, inbuilt loose wire box, ground terminal box, poly layer for protection complte all speciifed and directed. Note : (a) Rate of MCCB and MCBs are included in quoted rates.(b) capacity of Single pole MCB shall be provided as per requirement and direction.(c) Make of MCB, MCCBs and DBs should be same. |
| 221 | S&F of sheet metal enclosure double door flush mounting type suitable for SPN distribution board when MCB to be used having 200 Amp rated bus bar with common neutral link, factory fabricated 12 ways 240 V with IP43 protection including fixing in new location with connection of curcuit and submain as per site requirement complete all as specified and directed.Note : (a) MCBs are to be measured and paid seperately.(b) Makes of MCBs and DB should be same.(c) Extra circuit length where DBs are to be shifted from existing location to new location shall be deemed be included in quoted rates. |
| 222 | Supply and fixingminiature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 Amp 240V, 10 KA \"B\" curve bi-connect termination, label holder, 35mm2 terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed in the MCB DB Complete with connection testing and commissioning complete all as specified and directed. |
| 223 | Supply and fixingminiature circuit breaker (MCB) of SPN and current carrying capacity 40 Amps to 63 Amp240V, 10 KA \"B\" curve, bi-connect termination, label holder, 35mm2 terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed in the MCB DBComplete with connection testing and commissioning complete all as specified and directed. |
| 224 | M&L for earthing complete with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 Mtr below ground level) with top edge of earth plate not less than 1.5 Mtrs below ground level connected to GI wire 4 mm Dia as earth lead by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, including PCC (concrete chamber) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate, with fair finish internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire gauge mesh, 80 mm thick RCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) and specified including provision 20 mm dia medium grade pipe and watering pipe shall be 20mm bore medium grade, and including all excavation andearth work & connecting the earthing to an earthing test point including taking out old u/s earthing of any size and type complete all as specified & directed . NOTE: (i) The concrete pit shall be PCC 1:3:6 type C-140 mm thick pre cast cover slab of RCC(1:2:4) type B-1 using 20 mm graded stone aggregate reinforced with 8 mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in the electrical plate No.3 of MES SSR Part -1 (ii) item includes the cost of 7.5 m GI pipe for protection of earth strip.(iii) PCC pits extra cost of addtional length of watering pipe,bends elbows etc.shall be deemed to be included in the quioted rate. (iv) Item includes the cost of 7.5 mtr length Galvised Iron wire |
| 225 | Net Contract Sum will be after deducting Sch of Credit of Rs 1,26,667.20 |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
