}

Tender For M/T On Link Road Parhat Pull To Hatkoti Mandir Road Km 0/00 To 0/700, jubbal-Himachal Pradesh

Public Works Department has published Tender For M/T On Link Road Parhat Pull To Hatkoti Mandir Road Km 0/00 To 0/700. Submission Date for this Tender is 26-05-2025. Road Work Tenders in jubbal Himachal Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

49225844
Tender For M/T On Link Road Parhat Pull To Hatkoti Mandir Road Km 0/00 To 0/700
Tender
Indian
Himachal Pradesh
Jubbal
26-05-2025

Tender Documents

Tender Details

M/T On Link Road Parhat Pull To Hatkoti Mandir Road Km 0/00 To 0/700 Sh P/L M/T Works And P/F Crash Barrier Railing At Various Rds Between Km 0/00 To 0/700 , Earthwork In Excavation For Structures As Per Drawing And Technical Specifications Clause 305.1 Including Setting Out, Construction Of Shoring And Bracing, Removal Of Stumps And Other Deleterious Material And Disposal Upto A Any Lead And Lift , Dressing Of Sides And Bottom And Backfilling In Trenches With Excavated Suitablematerial.Useful Material Available From Excavation To Be Properly Stacked And Handed Over To The Department Free Of Cost Including All Leads And Lifts, As Per Hppwd, Specification Of 1990 Volume-I Or As Directed By The Engineer-In-Charge , Providing Concrete For Plain/Reinforced Concrete P.C.C. Grade M 20Nominal Mix (1:2:4) In Open Foundations Complete As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 Complete As Per Drawing Including All Leads And Lifts As Per Directions Of Engineer In Charge , Providing And Errecting W-Metal Beam Crash Barrier Comprising Of 3Mm Thick Corrugated Sheet Metal Beam Rail 70Cm Above Road/Ground Level Fixed On Ismcseries Channels Vertical Post 150 X 5 X 5Mm Spaced 2Meters Center To Center1.80 Meters Height Meter Below Ground/Road Level All Sheet Aparts And Fitments To Be Galvnised By Hot Dip Process As Fittings To Confirm To Is 1367 And Is 1364 Matal Beam Rail To Be Fixed On The The Vertical Post With A Space Of Channel Section 150 X 5 X 5 Mm 330 Mm Longcomplete As Per Clause 8810 Complete As Per Drawing Including All Leads And Lifts As Per Directions Of Engineer In Charge , Providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Boundmacadom Specification Including Spreading In Uniform Thickness, Hand Packing, Rolling With Threewheel 80-100 Kn (Eighty To Hundred) Static Roller In Stages To Proper Grade And Camber, Applying And Brooming, Crushable Screening To Fill-Up The Interstices Of Course Aggregate, Watering And Compacting To The Required Density Grading 3 As Per The Technical Specification Coause 405. Including All Leads And Lifts As Per Direction Of The Engineer-In-Charge. , Providing And Applying Primer Coat With Bitumen Emulsion (Ss-1) On Prepared Surface Of Granular Base Including Cleaning Of Road Surface With Hydraulic Broom And Spraying Primer @ Of 0.85 (Zero Point Eight Five Kilograme) Per Square Meter Using Mechanical Means As Per M.O.R.D.Technical Specification Clause 502 Including Carriage Of Materials With In All Leads And Lifts As Per Directions Of Engineer In Charge. , Providing And Applying Tack Coat With Bitumen Emulsion (Rs-1)Using Emulsion Distributor At The Rate Of 0.275 Kg (Zero Point Two Seven Five Kilogramme) Per Square Metreon The Prepared Granular Surfaceand Cleaned With Hydraulic Broom As Per Mord Technical Specification Clause 503 By Mechanical Means As Per Direction Of Engineer-In-Charge Including Carriage Of Material Through All Modes Of Trasportation Within All Leads And Lifts And Other Incidentials. , Bitumenious Concrete:-Providing And Laying 25 Mm Thick Bitumenious Concretewith 100-120 Tph Capacity Batchtype Computrised Hmp Producing An Avarage Out Put Oof 75 Tonne Per Hour Using Crushed Aggrigate Of Specified Grading Ii Premixed With Vg-10 Bitumenious Binder As Per Job Mix Formula With Minimum Binder Concrete Of 5.4%To 5.6% Of Total Weight Of Mix And Filler,Transportingthe Hot Mix To Work Site Laying With Hydro Static Paver Finisher With Sensor Control To The Required Grade Level And Alignment,Rolling With Smooth Wheeled, Vibratory And Tandem Rollers To Achieve The Disered Compction As Per Morth & Hspecificationclause No. 509 Complete In All Respect Including All Leads And Lifts As Per Directions Of Engineer In Charge.

Key Value

Document Fees
INR 500 /-
EMD
INR 48000.0 /-
Tender Value
INR 23.69 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail