Tender For Construction Of Icds New Building At Chhatarbandi Under Illambazar Dev. Block
Tender Value
10.74 Lakhs
Estimated cost
Bid Submission
03 Jun 2025
0 days left
EMD
21500
Bank guarantee accepted
Document Fee
2200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
illambazar → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Icds New Building At Chhatarbandi Under Illambazar Dev. Block
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm. |
| 2 | Filling in foundation or plinth by fine sand in layers not exceeding 150 mm. as directed and consolidating same by thorough saturation with water ramming complete, including the cost of supply of sand. (Payment to be made on measurement of finished quantity) fine sand |
| 3 | Brick soling with picked jhamma bricks including preparation of bed as necessary, with brick joints property filled in and packed with powdered earth and including necessary cushion of similar materials below the soling complete as per direction. Single brick flat soling (75mm thick). |
| 4 | Ordinary Cement concrete (mix 1:3:6) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor(A) In ground floor |
| 5 | Brick work with 1st class bricks in cement mortar (1:6)(a) In foundation and plinth |
| 6 | (b) In superstructure, ground floor |
| 7 | Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. (upto roof of ground floor)a) 25 mm. to 30 mm. thick wooden shutteringas per decision & direction of Engineer-in-charge. With out prop. |
| 8 | Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking after completion of works. (upto roof of ground floor)a) 25 mm. to 30 mm. thick wooden shutteringas per decision & direction of Engineer-in-charge. With prop. |
| 9 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes |
| 10 | Reinforcement for reinforced concrete workin all sorts of structures including distributionbars, stirrups, binders etc initial straighteningand removal of loose rust (if necessary),cutting to requisite length, hooking andbending to correct shape, placing in properposition and binding with 16 gauge blackannealed wire at every intersection, completeas per drawing and direction. III] other manufacturer not specified |
| 11 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or rougening of concrete surface, including throating, nosing and drip course where necessary (ground floor)(c) 15 mm. thick plaster(1:6) to outside wall,(both side) |
| 12 | a) with (4:1) cement morter 10mm th. (concrete surface) |
| 13 | c) with (6:1) cement morter 20mm th. (In side of Building) |
| 14 | Neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc. |
| 15 | Supplying, fitting and fixing windows and ventilators with in all respect excluding glazing.b) Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. [The extra rate admissible for the openable portion only] |
| 16 | (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.(i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. |
| 17 | Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials. 1.50 mm M.S. Sheet |
| 18 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with toppingmade with ordinary or white cement (as necessary) and marble In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement).(iii) 25 mm. thick |
| 19 | (b) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etcOn steel Surface |
| 20 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary: (iv) Two coats With super gloss (hi-gloss) -On steel or other metal Surface. With any shade except white. |
| 21 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as peranufacturer\"s specification and as per direction of the EICii) Solvent based interior grade Acrylic Primer, One Coat |
| 22 | Synthetic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer\"sspecification) ncluding cleaning andsmoothning of surface. Two Coats(i) Internal surface(Two coat ) |
| 23 | Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer\"s specification. Two Coats |
| 24 | Cost of Bala concept |
| 25 | Cost of wall writing& photo copy for display of scheme |
| 26 | Electric connection & Instalation @ 7.5 % |
| 27 | Sanitary Plumbing & Water sorce Works @ 12 % |
| 28 | Add GST 18% |
| 29 | Add labour cess 1% |
AI Tender Summary
Tender Timeline
May 19, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedJun 03, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 06, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender