Tender For Repair And Maintenance Of Floor In Type Iii 04 Nos Qtrs At Bsf Campus Stc Bsf Chakur
Tender Value
Ref. Documents
Estimated cost
Bid Submission
27 May 2025
0 days left
EMD
12000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
chakur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair And Maintenance Of Floor In Type Iii 04 Nos Qtrs At Bsf Campus Stc Bsf Chakur
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete. |
| 2 | Providing and fixing 25 mm thick pre-laminated medium density fibre boardexterior grade (Grade-I)IS:14587:1998marked with one side decorative and other side balancing lamination for cupboard shutters edges to be sealed withPVC edgebending tape 2.00mm thick of approved brand including ISI marked nickel plated bright finishing M.S. piano hinges conforming to IS:3818 marked with necessary screw etc all complete. |
| 3 | Providing and laying Vitrified tiles in floor in diferent sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Double charge vitrified tile polished finish of sizeSize of Tile 600 x 600 mm |
| 4 | Deduct for not using 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ sqm. |
| 5 | Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3 mm thickness. |
| 6 | ProvidingandlayingVitrifiedtilesindiferent sizes (thickness tobe specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm |
| 7 | 12 mm cement plaster of mix:1:4(1 cement: 4 fine sand) |
| 8 | 15 mm cement plaster on the rough side of single or half brick wall of mix:1:4(1 cement: 4 fine sand) |
| 9 | 6 mm cement plaster of mix:1:3(1 cement :3 fine sand) |
| 10 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand andmanufacturerincluding applying additional coats wherever required to achieve even shade and colourOld work (one or more coats) |
| 11 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work |
| 12 | Finishing walls with Acrylic Smooth exterior paint of required shade: Old work (One or more coat applied @0.90 Itr/10 sqm). |
| 13 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :Of area 3 sq. metres and below |
| 14 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm |
| 15 | P/F Health Faucet (ABS body) with 8 mm dia 1.2 mtr longflexible tube and wall hook complete as per direction of Engineer-in-charge.(make Cera, Hindware, parko, kingston or equivalent). |
| 16 | P/F C.P. brass two in one bib cock of approved quality conforming to IS:8931 as per direction of Enginner In-charge. 15 mm nominal bore .(make cera, parryware, Hindware or equivalent). |
| 17 | Providing and applying white cement based putty of required thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per direction of Engineer In-charge |
| 18 | P/F C.P. brass sink cock of approved quality conforming to IS:8931 as per direction of Enginner In-charge. 15 mm nominal bore .(make cera, parryware, Hindware or equivalent). |
| 19 | Modified Estimated Cost after using correction factor on DSR 2023 on account of GST @ 0.973on sr 1 to 14 i.e.* 555778.40 -540772.00=15006.02 |
AI Tender Summary
Tender Timeline
May 19, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedMay 27, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 28, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender