Tender For Internal Electrification In Tissue Culture Lab At Agriculture University Kumarganj Ayodhya - Wiring point for light with 1.5sq.mm.FRLSHPVCinsulated multistrand single core copper conductor cablein heavy guage PVC conduit pipe partly concealed in the walland partly laidinslab alongwith the reinforcement before concreting, with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside.,Add with modular type switch inplace of piano type switch & ceiling rose/ angle/batten holder., complete in all respect, as directed including matching colour wash.138 C+187A 2 Wiring point for fan / fresh air fan (light duty exhaust fan) with 1.5 sq.mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside.,complete in all respect as directed including matching colour wash.with modular type switch inplace of piano type switch & ceiling rose/ angle/batten holder., complete in all respect, as directed including matching colour wash.140 C+187A 3 Wiringpointforplugwith 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable inheavyguagerigidsteel conduit partly concealed in wall and partly laid in slab alongwith the reinforcementbefore concreting, complete with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside.,Add for plug point with modular switch & socket in place of piano type switch & socket.complete in all respect as directed including matching colour wash.141 C+187C 4 Wiring point for two ways light with 1.5 sq. mm. F.R. PVCinsulated multistrand single core copper conductor cable in heavy guage PVC conduitpipe partly concealed in the walland partly laid in slab alongwith the reinforcement before concreting, complete with 1.5 sq. mm.FRLSH PVCinsulatedmultistrandcopperconductorcableas earthwire drawn inside the conduit., Add for 2 way light point with modular switches in place of piano type switches.complete in allrespect,as directed, including matching colour wash. 139C+187B 5 Wiring point for Call bell with 1.5 sq.mm.FRLSHPVCinsulated multistrand single core copper conductor cable inPVC conduit pipe concealed in the wall,and partly laidinslab alongwith the reinforcement before concreting, complete with 1.5sqmm FRLSH PVC insulated multistrand copper conductor cable as earthwiredrawn inside the conduit,GP Box, piano type switch & ceiling rose/ angle/batten holder on 3 mm thickphenolic laminated backelite sheet etc., complete in all respect, as directed including matching colour wash. Add for light / fan points with modular type switch in place of piano type switch.142 C+187E 6 Supply and fixing of power plug with 15A/250 voltflush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 175mm x 100mm x 50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer. 7 S&F of sheet steel enclosure surface/flush mounting fitted with 30Amp 2Pin and earth metal clad scraping earth plug and socket complete in all respect,as directed at site byEngineer in charge. 8 S&F surface/flush mounting 8ways SPN distribution board with additional metal door without MCB complete in all respect, as directedbyEngineer in charge.1024A 9 S & F surface/Flush mounting 4ways TPN distribution board with additional metal doorwithout MCB complete in all respect,as directed at site byEngineer in charge.1026A 10 S & F surface/Flush mounting 6ways TPN distribution board with additional metal doorwithout MCB complete in all respect,as directed at site byEngineer in charge.1027A 11 S & F surface/Flush mounting 8ways TPN distribution board with additional metal doorwithout MCB complete in all respect,as directed at site byEngineer in charge.1028A 12 S&F of32 Amp. DP MCB (10 KA) 13 S&F of40Amp. 4 Pole MCB 14 S&F of63Amp. 4 Pole MCB (10 KA) 15 S&F of100Amp. 4 Pole MCCB (10 KA) 16 S&F of 6 Amp to 32 Amp. MCB (10 KA) C Curve 17 Supply and wiring of submain with two number2.5sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia. in 20mm dia. heavy duty (2mm thick) Partly Laid in Slab with reinforcement before Concreting and Partly Conceiled in wall PVC conduit with one number 1.5 sq. mm. FRLSH PVC insulated 1100 V grade multistrand copper conductor cable as earth continuity wire drawn inside the conduit. 18 upply and wiring of submain with four number2.5sq.mm. FRLSH PVC insulated single core multistrand copper conductor cable in 25 mm dia heavy duty (2 mm thick) Partly Laid in Slab with reinforcement before Concreting and Partly Conceiled in wall PVC conduit with 2 number 1.5 sq. mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable as earth continuity wire drawn inside the conduit .complete in all respects including matching colour wash etc. complete in all respect. 19 S/W of submain withtwo number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable20 mm dia heavy duty (2 mm thick)Partly Laid in Slab with reinforcement before Concreting and Partly Conceiled in wall PVC conduit with one No. 2.5sq. mm. FRLSH PVC insulatedmultistrand copper conductor cable as earth contuiity wire drawn in conduit. including matching colour wash etc., complete in all respect.216C 20 Supply and wiring of4 number 4 sq.mm. FRLSH PVC insulated 1100V grade multistrand single core copper conductor cable in 32 mm dia heavy duty (2 mm thick) PVC conduit with 2 nos 2.5 sq.mm. FRLSH PVCinsulated multistrand copper conductor cable as earth continuity wire drawn in conduit. including matching colour wash etc, complete in all respect. 21 Supply and wiring of submain with two number 6 sq. mm. FRLSH PVC insulated 1100V grade multistrand single core copper conductor cablein 25 mm dia heavy duty (2 mm thick) Partly Laid in Slab with reinforcement before Concreting and Partly Conceiled in wall PVC conduit with one No.4 sq.mm. FRLSH PVC insulatedmultistrand copper conductor cable as earth continuity wire drawn in conduit.. complete in all respect. 22 Supply and wiring of4 number 6 sq.mm. FRLSH PVC insulated 1100V grade multistrand single core copper conductor cablein 32 mm dia heavy duty (2 mm thick) Partly Laid in Slab with reinforcement before Concreting and Partly Conceiled in wall PVC conduit with 2nos 4sq.mm. FRLSH PVCinsulatedmultistrand copper conductor cable as earth continuity wire drawn in conduit.includingmatching colour wash etc.complete in all respect. 23 Supply and wiring of4 number 10 sq.mm. FRLSH PVC insulated 1100V grade multistrand single core copper conductor cable in heavy duty (2 mm thick) PVC conduit with 2 nos 6 sq.mm. FRLSH PVC insulated copper conductor cable as earth continuity wire drawn in conduit.includingmatchingcolour matching colour wash etc, complete in all respect. 24 Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing.725B 25 Supply and fixing of one number 8 SWG G.I. wire in 15mm dia. G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site.721 26 Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect.716 27 S&F of 200 Amp. four pole change over switch on 50mm x 50mm x 6mm angle iron frame, including the cost of labour, T&P, painting and other material required for proper completion of the work as per direction and satisfaction of Engineer in charge. 379 28 S&Fof 200 Amp. 415 V metal clad TPN HRC type switch fuse unit complete with HRC fuse on angle iron bracket complete in all respect.328 29 Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCBs (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mountedon non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCBs shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. Incoming 630Amp.MCCB1No.,Outgoing 200Amp MCCB2Nos.,100AmpMCCB 01No.,63AmpMCCB 2Nos,+ S/F of 100Amp 4 Pole MCCB1021C 30 S/ of ceilling Fan with fan motor of AC permanent insulation,capacitor rating confirming BEE 5star rating andIS:374/79 1200 mm Sweep and IS:374/79 and also comply with IS:1709/1984 with latest amendment. The rated voltage 220/240 Volts, 50 Hz, 1-ph AC the fan assemble should consists of down rod blades, shackle canopies etc and with double ball bearing system 31 Erection and testing of ceiling fan and regulatoretc. excluding supply of down rod, complete in all respect. 32 Supply and fixing hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16 SWG MS sheet incorporating 10mm dia. M.S. round bar duly bent for supporting fan hanger duly painted with red oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concretingalongwith supply of all material, labour, T&P etc. required for proper completion of the work. 33 Supply and fixing of electronic fan regulator( Modular) 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work. 34 S/F of Modular Blanking Plate on the Existing modular Plate & Switch box excluding Modular Plate as required 35 S/D of 2 Pair 0.5 Sqmm FRLS PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/recessed steel/PVC Conduit as required 1.18.2 36 S/Dof co-axial TV cable RG-6 graded 0.7mm solid copper conductor PE insulated shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/recessed steel/PVC conduit as required1.19 37 S/F of 25mm PVC Conduit alongwith the accessories in recess including painting in case of surfce conduit or cutting the wall and making good the same in case of recessed conduit as required. 1.21.2 38 S/D of Telephone Modular Socket on the existing modular plate including connection but excluding modular plate etc as required 1.24.6 39 S/D of TV Antena Modular Socket on the existing modular plate including connection but excluding modular plate etc as required 1.24.7 40 Supply and fixing of door chime onpolishedMDFEG / Teakplyboard including making connections etc. complete in all respect. 1102 41 S/F of 1 or 2 modules GI Box 75mmX75mm along with modular base cover plate for modular switches in recess etc as required1.27.1 42 S/F of Suitable size GI Box with ModularPlate and cover in front on surface or inrecess including providing and fixing 3 pin 5/6A modular socket outlet and 5/6 modular switch connection etc. as required 1.31 43 S/F of Suitable size GI Box with ModularPlate and cover in front on surface or inrecess including providing and fixing 6 pin 5/6A modular socket outlet and 15/16 modular switch connection etc. as required1.32 44 Add for Invertor Wiring in wiring Point for light/ Fan/ Plug with 1.5 mm AI Wire 189A 45 S/F of Cable end Box (Loose Wire Box) Suitable for 4 Way TPNDB on Surface /recess complete with testing and commissioning etc as required. 2.24.1 46 S/F of Cable end Box (Loose Wire Box) Suitable for 6 Way TPNDB on Surface /recess complete with testing and commissioning etc as required. 2.24.2 47 S/F of Cable end Box (Loose Wire Box) Suitable for 8 Way TPNDB on Surface /recess complete with testing and commissioning etc as required. 2.24.3 48 S/F of LED Tube Light with heavy duty metal Box Type Tube Light Fitting 1X22 Watt Suitable for upto 1X22 Watt LED Polycorbonate tube Light Complete including tube suitable for both surface and suspended complete in all respect. Cat AAA 23.07 49 S/F of wate Tight oblong 10 Watt LED Bulkhead lumminaire with driver set confirming to IP 65 and above protetion complete in all respest 23.11 50 S/F of recess mounting round 15 to 18 Watt LED Down Lighter having Powder Coated die cast aluminium housing with heat sink, diffuser/reflector and driver set complete in all respect. 23.03 51 S/F of 36 Watt to 46 Watt indoor recess mounting LED Square Fitting for Armstrong Ceiling Having Poweder Coated die Cast Aluminium Housing body with extended heat sink and diffuserr of special Polycarbonate material nd driver set complete in all respest. 23.05 52 Supplyandlayingof aluminiumconductorPVCinsulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. a 10 sq. mm X 2 core20a.1.2 53 b 120 SqmmX 3.5 Core 20a.1.15 54 Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring ofthe cable shall be properly connected with the earth as per direction of Engineer-Incharge.120 SqmmX 3.5 Core 503(o) 55 Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge.(a) 120Sqmm 504(j) 56 (b) 95 Sqmm 504(I) 57 S & F sheet steel enclosure surface/Flush mounting fitted with 20Amp. 2Pin and earth metal clad scraping earth plug and socket complete in all respect. as directed at site byEngineer in charge. 1031 58 S/F of M.V. Danger Notice Plate of 200mmX150mm made of mild steelm at least 2 mm thick and viterous enameled whithe on bothe sides and with incription in single red colour on fron t side as required. 1109 59 Supply and laying of 1800mm x 900mm x 12mm thick chequered rubbbber matting of tested quality. 1136 60 Supply and fixing of fire extinguisher, ABC Type 4.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. 1131A 61 Supply and fixing of C02 type fire extinguisher 4.5 kg. capacity(ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. 1132 62 S/F of IP 20 front lit mid powder capital SMD type LED light recess /mounting round/square 12 to 15 W with cutout minimun 125mm hight minimimum 40mm LED Down Lighter having Powder coated die cast aluminimum housing with heat sink diffuser /reflector and driver set sutable for 24 hour continous operation all respectCat AAA 23.06 63 S/F of GI Pipe 100mm Medium Class in ground Complete with GI Fittings including trenching 75mm deep and refilling etc. as requirred 14.13.3
