|
| 1 | M/150 class brick work in 1:4 cement and coarse sand mortar including supply of all mat. Lab. T&petc. reqd. for prop. Comp. of the work…all comp. S.O.R. NO. 305 |
| 2 | 12mm. Thick plaster in 1:5 cement and coarse sand mortar including all mat. Lab. T&P etc……all comp. S.O.R NO. 584(i) |
| 3 | Mild steel or iron work in plain work such as in reinforcement ……all comp. S.O.R. NO. 503 |
| 4 | Provding and laying vitrified floor tiles in(60X60)cm (thickness to be specified by the manufacturer) with water absorptions less than 0.08% and conforming to IS:15622 of approved make in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement:4 c/sand) including grouting the joints with white cement and matching pigmentes etc as per D.S.R 11.41.2 |
| 5 | Providing and applying white cement based putty of average thichness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(As per Item no. 13.26 new itme |
| 6 | Finishing walls with Acrylic exterior paint of requried shed on new work two or more coat applied @1.67 ltr/sqm and inculding base coat of water proof cement paint applied @2.20 kg/sqm as per D.S.R 13.46.1 |
| 7 | Painting two coats on new iron & wood work as per SI No. 1+2+4iii in new item |
| 8 | Cement concrete in prop. Of 1:2:4 with cement coarse sand and 2 cm guage graded stone grit in road work incl….. All work comp. S.O.R. NO. 279(i) |
| 9 | Supply and fixingof 10 cm internal dia A.C down pipe everest or charminar make copmlete with bends with door at top and plain at bottom and grating and incl. supply of all necessary MS clamps 2.5cmx3mm fixed to walls and incl. supply of 15 cm long 6mm dia nails all material labour and T&P etc. required for completion of the work and also incl. repair of plaster pointing etc.if damaged during fixing of pipe etc.….. all Comp.As per P.W.D.schedule item. No.730 |
| 10 | Providing and fixing PVC conection Pipes etc complete :a- 18.7.2 (15 mm dia internal) |
| 11 | b- 18.7.3 (20 mm dia internal) |
| 12 | p/F 6mm china wash basin in flooring or skirting dado laid with 1:3 cement and coarse sand mortar including grouting the joints with white cement and matching pigmentes etc as per SOR No.628 |
| 13 | P\F of water closet squatting pan (Indian type W.C. pan size 580x440mm) H or E with 100mm sand cast Iron P or Strap,10 Litre low level white P.V.C. flushing cistern with manually etc ….. All Comp. As per P.W.D.schedule Item No.17.1 (M.Rate) |
| 14 | Providing and fixing C.P.100 mm dia jali etc. all comp. (MR) |
| 15 | Providing and fixing C.P. brass bib cock of approvrd quality 20 mm internal bore etc. all comp. item no. 18.49 |
| 16 | Providing and fixing C.P. brass long body bib cock of approvrd quality 15 mm nominal bore etc. all comp. item no. 18.50 |
| 17 | Providing and fixing of valve (brass) of approvrd quality 15 mm nominal bore etc. all comp. item no. 18.18 |
| 18 | Providing and fixing C.P. brass angle vavle for basin mixer and geyse. approvrd quality 15 mm nominal bore etc. all comp. item no. 18.53 |
| 19 | Providing andplacing on tarrace (at flore levels) polyethyleni water stor tank isi marka with cover and stobile looking arrangments and making necessoey holes for inlet outlet and over flow pointall comp. item no. 18.48 |
| 20 | Providing and fixing 600x450 mm bebeled edge miror of supirior glass comp. with 6 mm thick hard board groung fixed two gooden claeats with c.p brass screws nd brass air comp.item no. 17.31 |
| 21 | Providing and fixing of towel rail in sze 450x20 mm of approved qlty etc all comp.M.R |
| 22 | supply abd Providing of pvc 10ltr. Dustbin of approvedqlty etc all comp.M.R |
| 23 | Earth work in cutting or in embankment ordinary soil,exacavationto be in the regular pits nit execulding 0.5 m in depth and earth work in embankment20 cm. layers including lift upto 1.5 m and dressing of sides and ramming of bottom sand disposal of surplus excavated earth as directed by the Engineer as per s.i No. 253 from 2.00 km cartage... |
| 24 | Supply and laying of 22.4-53 mm GSB with consoledation of stone ballast by hand remmer charge… |
| 25 | proving and laying of factory made interlocking cement concrete tiles (30mpa) including 25 mm thick completed bed of fine sand compacting and proper embedding/lating of interlocking tiles leveling and dressing of surface to required level and slope, filling joints with fine sand including the cost of material. labour T&P etc. required for proper completion of work as directed by ingineer in charge. SI No- new item 01 |
| 26 | S/F of granite/marble stone indication board in brick masonery padastal etc. all comp. |
| 27 | Steel work in built up labetc. Inculding cutting hosting, fixing in positer & applying a primer of app steel primer inculding widh & bolled with special welding etc all com.. As per DSR(2018).10.16.1 |
| 28 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/m² |
| 29 | Providing and fixing plain G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/m² DSR 12.4.2.13.33 % GST and Labour cess |
| 30 | Providing and fixing plain G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/m²DSR 12.7.2.13.33 % GST and Labour cess |
| 31 | P/F of panel for 1 H. P.,factory fitted,, Submersiblepump ISI marked with starter. (M.R) |
