Tender For Mgnregs-Material Supply For Anganvadi And Road, kodur-Kerala

Tender For MGNREGS-Material supply for Anganvadi and road-- 1 Material Supply 2 Stone for masonry work 3 Through and bond stone size 24 x 24 x 39cm 4 Portland Cement 5 Coarse sand (zone III) 6 Sundries 7 Structural steel such as tees, angles, channels and R.S. joists 8 Adjustable telescopic prop 3 m (2.02-3.75m) 9 Beam clamp 300-380 mm (450-1070 mm) 10 Second class kail wood in planks 11 Second class kail wood in scantling 12 Hollock ballies 125 mm diameter 13 Twisted steel/deformed bars 14 Stone Aggregate(single size):20 mm nominal size 15 Stone Aggregate(single size): 10 mm nominal size 16 Adjustable span ESO+SI (2.35-3.40) 17 Hollow bloks oof size 40x20x10cm 18 Anjili wood scantls 19 Mild Steel round bar above 12 mm dia 20 Flats up to 10 mm in thickness 21 Rawl plug 50 mm (designation 10 nos) 22 Fine sand (zone IV) 23 Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc. 24 Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black 25 Bright finished or black enameled mild steel screws 20 mm 26 Anjili wood planks 27 Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm 28 Bright finished or black enameled mild steel screws 40 mm 29 Factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded profile 30 35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished) 31 Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm 32 Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) 33 Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm 34 laterate stone of size 40x20x15cm 35 Stone Aggregate(single size): 40 mm nominal size 36 Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper 37 Vibrator (Needle type 40 mm) 38 Red oxide Zinc chromate primer 39 Vitreous China orrisa type w.c. pan size 580 mm 40 Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe) 41 100 mm S.C.I. trap with vent hee 42 Vitreous china flat back wash basin 550x400 mm 43 15 mm C.P.brass tap 44 C.P. brass waste 32 mm 45 C.I. bracket for wash basin and sinks 46 PVC pipe 25 mm outer dia. 10kgf cm2 47 PVC pipe 63 mm outer dia. 4 kgf/cm2 48 PVC pipe 110 mm outer dia. 4kgf/cm2 49 Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre 50 Plastic emulsion paint 51 Multi surface paint 52 Special primer (C.W) 53 Synthetic enamel paint in black or chocolate shade 54 Polyethylene water storage tank with cover and suitable locking arrangemnet 55 Wall form panel 1250x450xmm 56 Corner angle 45x45x5 mm 2.50 long 57 Column clamp 450x1070 mm 58 Prop 2 m (2-3.5m) 59 Mild steel sheets for tanks 60 Iron pintels including weldded pin 61 Mild steel sheets with bolts and nuts to rest on pintels 62 Quarry Waste 63 Mild steel hooks

INR 2950 /-

INR 48759.0 /-

INR 19.50 Lakhs /-