Tender For Constructing Storage Cement Bandhara At Nhaved Pardhuna Odh Tal Ambegaon
Tender Value
17.76 Lakhs
Estimated cost
Bid Submission
28 May 2025
0 days left
EMD
17767
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
pune → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Constructing Storage Cement Bandhara At Nhaved Pardhuna Odh Tal Ambegaon
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 23-May-2025 | 2ncall | Date | 28-May-2025 |
BOQ
| Sl. No. | Item Description |
| 1 | Cleaning grass and removal of rubbish up to a distance of 50 meters outside the periphery of the area as directed. |
| 2 | Excavation in all kinds of soil & Soft murum including boulders up to 0.6 m diameter (0.113 cum) for canal, seating of embankment, filter drains / catch water drains etc., and placing the excavated stuff neatly in dump area or for formation of service road / embankment as directed including cost of allmaterials,machinery,labour, dressing bed and sides to required level and profile etc. complete with lead up to 15 m and all lifts as directed. |
| 3 | Excavation in hard murum including boulders up to 0.6 m diameter (0.113 cum) for canal, seating of embankment, filter drains/catch water drains etc., and placing the excavated stuff neatly in dump area or for formation of service road /embankment including cost of all materials,machinery, labour, dressing bed and sides to required level and profile etc., complete with leads as below and all lifts as directed. |
| 4 | Excavation in soft rock without blasting including boulders up to 0.6 m diameter (0.113 cum) for canal, seating of embankment, filter drain / catch water drains etc., and placing the excavated soft rock neatly in dump area or for formation of service road including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc. complete with lead up to 15 m and all lifts as directed. |
| 5 | Excavation in hard rock of all toughness by blasting including boulders above 0.6 m dia.(0.113Cum) minimizing damage to side slopes of excavation in water prism area by adopting any one or combination of line drilling /pre-splitting /smooth blasting techniques and placing the excavated rock neatly in approved dump area including cost of all materials, machinery, labour, leveling bed etc.,complete with leads as below and all lifts as directed. |
| 6 | Drilling 32 mm diameter grout holes in concrete / rock by percussion drilling using jack hammer as directed to specified depth for consolidation / contact grouting including cost of all materials, machinery, labour, cleaning holes, ventilation, lightening, drainage and all other ancillary operations etc complete |
| 7 | Providing and laying in situ cement concrete of grade M-15 of trap / granite / gneiss / quartzite / graded metal for PCC with or without surface reinforcement / RCC concreting requiring heavy or special type of shuttering for works of gallery, sluice, spillway crest, spillway downstream face, energy dissipating structures, intake structures, training walls, piers, abutments etc. with Concrete Mixer considering lead of 50 m with shuttering and scaffolding, placing, compacting, curing etc. complete with an initial lead of 50 m. & lift of 1.5 m. |
| 8 | Providing and layingTor steel reinforcement for RCC work such as slab, piercaps,gaurdstones etc. including cutting,hookinglaying in position etc. with all leads and lifts |
| 9 | Providing hearting embankment using selected impervious material available directly from excavation in layers including cost of all materials, machinery,labour, all other operations such as collection of material, spreading soil in layer of specified thickness, sorting out, breaking clods, leveling, sectioning edges / sides, watering, compacting each layer to density control of not less than 95 percent or as stipulated using vibratory compactor including cost of water etc.complete with lead up to 1 km and all lifts as directed |
| 10 | Providing and constructing 230 mm thick dry rubble stone pitching using stones and stone chips from approved source from borrow area including cost of all materials, labour, hand packing /wedging stone chips, finishing etc., complete withlead up to 50 m and all lifts. |
| 11 | Providing and fixing canal information board of 1.2 x 0.75 m prepared on 16 gauge M.S. sheet with angle iron frame of size 35 X 35 X 3 mm with cross bracing of size 25 X 25 X 3 mm including painting with one coat of zinc chromate storing primer and two coats each of green/white back ground and back side grey store enamelled bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows coated with non pealable crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50X50X5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete in M-15 block of size 60 X 60 X 75 cm as directed by engineer-in-charge. |
| 12 | Charges for Laboratory Test required during work - Fine Aggregate Finess Modulus , Silt & Clay Content |
| 13 | Charges for Laboratory Test required during work - Coarse Aggregate Sieve Analysis,Water Absorption & Specific Gravity , Flankness Index and Crushing Value |
| 14 | Charges for Laboratory Test required during work - CementStanadard Consistency ,Setting Time ,Specific Gravity&Compressive Strength |
| 15 | Charges for Laboratory Test required during work - Steel ( Tensile strength, % , Elongation, Yield Stress, Weight- Per Meter,Bend/ Rebend Test, Proof Stress.) |
| 16 | Charges for Laboratory Test required during work - Concrete Cube Compressive/Split tensile strength( 7 days 3 Cubes and 28 days 3 Cubes) |
AI Tender Summary
Tender Timeline
May 23, 2025
11:30 IST
Tender Published
Tender notice published.
Completed
May 28, 2025
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedMay 28, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 29, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender