Tender For Providing Led Street Light Network Along With 03 Years Amc At Ia. Sector 22 Meerut Road Ghaziabad - Supply & fixing90 W LED Street light having die cast aluminium body and diffuser with driver set suitable for 90 Watt confirming to IP 66 protection complete in all respect with surge protection device. Minimum CAT AA with 5 year warrenty against defects,damaged & missing)Make: Cormpton/Philips/Bajaj/wipro. 2 Supply & fixing steel tubular pole 9.50 Metre long designated 410 SP-39 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect. 3 S/F of street light junction box made of SMC material complete with 4 way terminal block, cable gland etc. 4 S/F of 6 Amp to 32 Amp SP MCB (10KA) B curve 5 Supply & fixing 32mm dia,1.20M long GI bend pipe with 02 nos. clamp of 50x6mm MS Flat suitable for fixing street light on ST pole including cost of men and T&P. 6 Supply & fixing UPSIDA Logo plate(Retro-reflective) on ST Pole including cost of clamp and nut & bolt as per Design of E/I. 7 Supply & fixing pole earthling of pole by inserting MS Rod 20x2500mm in vertically ground level and connecting the pole with the help of 6 SWG GI wire including cost of all material, men and T&P. in industrial area as per UPSIDA/UPPCL Technical specification. 8 S/E of D clamps of 38mm X 6mm flat iron for wall/ roof type service bracket with bolts, nuts etc, complete in all respects including painting with aluminium paint 9 Supply & fixing of 100 x 110 mm shackle insulator /100 x 80 mm pin insulator including G.I. Bolts/ spindle nuts etc.Complete in all respect.as pre UPPWD Sch. No. 621 10 Supply, sagging & tensioning of 6 SWG GI earth wire including cost of material, men and T&P 11 Suppy,laying & drawing of3x1.5 Sq mm PVC insulated copper cable for Street/flood lights connection in existing pipe/surface/air as required including cost of material, men and T&P.(Havells/Polycab/Grandlay) 12 Supplying and laying of 25 sq.mm 3.5 core aluminium conductor PVC insulated, armoured, served, sheathed cable 1100 V grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand alround and protected with burnt bricks on sides and on top complete in all respects. UPPWD Sch 510(J)-507 13 Supply and laying of 16 sq mm 2 core aluminium conductor PVC insulated , armoured , served ,sheathed cable 1100 v grade in existing pipe/surface/pole etc.( Havells/Polycab/Grandley) Schedule 501©-507 14 Supply & fixing of 25 sq. mm 3.5 core cable socket/lug with insulated tape in cable termination complete in all respect. 15 Supply & fixing of 16 sq. mm 2 core cable socket/lug with insulated tape in cable termination complete in all respect. 16 Supply & fixing of 25 sq. mm 3.5 core brass nickle plated compression gland for PVC insulated cable complete in all respect. 17 Supply & fixing of 16 sq. mm 2 core brass nickle plated compression gland for PVC insulated cable complete in all respect. 18 Supply & fixing 40A TPN capacity of automatic street light cubical panel painted with anti corrosive alkali and acid proof paint consisting of digitel/time switch TSO 100 series with ML-3 contactors,HRC fuses/MCB/MCCB/ isolating switch metering instrument & instrument box with CTs etc or as directed . Design & material will be approved by Engineer in charge. 19 S/B of 40 mm dia x 4.5 mtr. long G.I. pipe vertically for earthing having 12 mm dia. Holes spaced 75 mm apart drilled upto 2 mtr. from the bottom complete with earthing lead of no.6 to 8 SWG GI wire in G.I.pipe upto appron upto switch board 30 cm square box with hinged cover masonary enclosure. Funnel of top, alternate layers of charcoal and salt at least 150 mm thick alround etc. as per direction E/I complete in all respect.(Approved make) 20 Providing & fixing 35mm x6mm G.I. earth strip on surface or in recess including cost of GI saddle/Al. Alloy/cadmium/PVC fastener etc.plated iron screw etc. as required for connections. 21 Supply and Laying of 63 mm HDPE/DWC pipe ( 700mm below ) ISI marked through horizontal boring( trenchless )by making pit at regular interval and refiling the pit after work as before on road crossing including cost of all material , men and T&P , confirming to IS 14930 Part II (Road Crossing ). 22 Supply & Laying of 90 mm dia (OD-90 mm & ID-76 mm nominal) DWC HDPE pipe ISI marked along with all accessories like socket, bend,couple etc. confirming to IS 14930 Part-II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level)including excavation and refilling the trench but excluding sand cushioning andprotective covering etc. complete in all respect 23 Supply & fixing of 50 mm dia GI pipe B classfor climbing up the cable from ground to over head LTlinepole/Metering point complete withGI fitting including material,labour and T&P as per SIDC Sch item No. 25A.1 24 Supply & fixing of 100 mm dia GI pipe B classfor climbing up the cable from ground to over head LTlinepole/Metering point complete withGI fitting including material,labour and T&P as per SIDC Sch item No. 25 25 Supply & fixing MS clamp made out from 50x6mm MS flat for securing GI Pipe/HDPE with ST pole. 26 Supply and erection of Double Pole structure consisting of 410-SP-56,11m long241 Kg complete steel tubular pole to be grouted as 1/6th of overall length below ground level with 45 cm dia cement concrete plinth around the pole & 45 cm above the ground level. The foundation of underground will not be less than 20 cm thick layer of cement concrete in the ration of 1:3:6 ( cement : coarse sand : over burnt brick ballast/stone ballast). The brick ballast / stone ballast will be used of 1.25 cm size with stone pad of 30X30X7.5 cm at the base. The cost includes all men and material.UPSIDC schedule No E04A.1.I 27 Supplyandinstallation,testing&commissioningofoutdoortypealuminiumwoundoilcooled transformer of ratings 25 KVA, 11/.04 KV on double pole including cost of base channel & holding clamps.complete as per IS-1180-2014 (Discom Approved Make) proper completion of work as per direction of Engineer in charge 28 Supply & fixing of M.S Top channel of125x65x2240 mm including costof holding clamps and materials for proper completion of work as per direction of Engineer in charge 29 Supply & fixing of M.S droper channel of 100x50x2000 mm including cost of holding clamps and materials for proper completion of work as per direction of Engineer in charge 30 Supply & fixing of Straight M.S.channel 75X40 mm,2.24m long complete as per SIDC Sch.No.3(3)E36.01 31 Supply and fixing of 11KV TPMO Switch of 400 amps. Copmlete in all respect as per direction of Engineer in charge complete incuding all T&p, men and material required for proper completion. Stock Issue 2023-24, Item No. 92 (Annexure-I) 32 S/F of 11 kV three phase D.O. fuse set complete with suitable clamps, nuts & bolts, fuse wire etc. 33 Supply&fixxingof11KVdiscwithinsulatorwithgalvanisedinsulator,ballandsockettype complete with strain clamps nuts,bolts,washers,T&P men & material for proper completion of work as per direction of Engineer in charge 34 Supply &fixxing of11KVpinwithinsulatoronchannelarmfixedonST/DPincluding cost of nuts,bolts,washers,T&P men & material for proper completion of work as per direction of Engineer in charge 35 Supply & laying 70 sq mm 3 core Al. conductor XLPE insulated PVC bedded galvanised flat steel strip armoured, served, sheated cable 11 KV grade laid with existing DWC Pipe in ground. The armouring of the cable shall be properly connected with earth conductor by clamp etc. as per PWD Sch. 506(d)-507 (Polycab/Havells/Grandlay/Gloster Make) 36 Supply and fixing ofjointing kit suitable for 70-120 sq.mm 3 core H.T.cable outdoor type with kit no. OT-5 including all materials,labour and T&P required for proper completion of work as per specification 37 Supply and fixing of MS/GI clamp as per design suitable for fixing shackle insulator, made out for 50x6mm M.S. Flat including nut, bolt & washer.(for Tun and T-Points ) 38 Supply , Sagging & tensoning of overhead line with insulated ACSR weasel conductor including binding etc complete in all respects. 39 Supply & fixing insulated piercing connector set suitable for ABC cable/Insulated Conductor including cost of material,men and T&P. 40 S/B of 600x600x6mm GI plate vertical for earthing with its top at least 3 M. below ground levelcomplete with20 mm dia. GI pipe and funnel for watering andone earthing leads of no. 8 to 10 SWG GI wire in 15 mm diaGI pipeupto switch board (from appron to switch board the cost of GI pipe snd GI wire be extra)30 CM square C.I. framewith hinged cover masonary housingalternate layers of charcoal /Coke and saltat least 150 mm thick alround etc. as per direction E/I complete in all respect as per drawing as per UPPWD Sch. No. 702 41 Supply,sagging,tensioning,jointing and binding of ACSR Weasel conductor including cost of aluminium tape binding wire and jointing sleeves complete in all respects including materiaI,men an T&P for proper completion of work . 42 Supply & Fixing of anti climbing device on ST pole by fabricated G.I. flat/bar in shope of ring having MS pointed fins foo 6mm dia of 25mmlength in 8nos. Including cost of all material, men and T&P as per direction fo E/I. 43 Cleaning & spray painting of ST bend pole and power ST Pole ( upto 7 mtr height in case of shut down) with one coat of red oxide primerand two coat of aliminium paint/PU paint as per direction of Engineer incharge including cost of all material, men and Hydraulic cran,other T&P( Burger/Nerolac/Asian mark) 44 Painting letter ( Pole no. ) 2.5 cmm up to 8.0 cm size complete on street light pole/panel/other electrical properties under UPSIDA including cost of all material , men and T&P. UPPWD CIVILSOR Sch Item Mno.817, Ch-26 45 Supply & fixing of 16 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 360 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 &having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect.. (Bajaj/Philips/Wipro/Crompton/BP& Approved make in UPPWD) with UPSIDA Acrylic Glow shine prescribed Logo. 46 Supply & fixing of factory wired integral 200 W LED flood light luminaries with die cast aluminium housing built with driver set confirming to IP 66 protection complete in all respect, Cat.-A (Bajaj/Philips/Wipro/Crompton/Approved make in UPPWD) 47 Supply and fixing 25A TPN capacity of automatic street light cubicle control panel painted with anticorrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering insteument & instrument box with CTs etc. complete in all respect. 48 Supply and wiring of submain with 2 number 2.5 sqmm FRLSH PVC insulated single core multistranded copper conductor cable in existing conduit complete in all respects complete. 49 Supplying and laying of 16 sq.mm 4 core aluminium conductor PVC insulated, armoured, served, sheathed cable 1100 V on serface the cable run shall be fixed on ms clamps etc of suitable size or as directed by the e.i. grade at a complete in all respects cable laying in existing pipe. (Havells/Polycab/Grandley) 50 Supply & Laying of 63 mm HDPE pipe ISI marked along with all accessories like socket, bend, couple etc. confirming to IS 14930 Part Il complete with fitting and cutting jointing etc direct in grownd 75 cm below ground level including excavition and refilling the trench but excluding sand cushining and protective covering etc. 51 Supply & fixing of 16 sq. mm 4 core brass nickle plated compression gland for PVC insulated cable complete in all respect. 52 Supply & fixing of 16 sq. mm size pin or plan type copper tin plated socket/lug to cable leads with insulated tape and making connection to point complete in all respect. 53 Supply & fixing of 50 mm dia GI pipe B class for climbing up the cable from ground to over head line LT pole complete with Gl fitting including material, labour and T&P as per SIDC Sch item No. 25A. 1(LS 6.0 mtr for each HM) 54 Supply & fixing MS clamp made out from 50x6mm MS flat for securing GI Pipe/HDPE with ST pole. 55 Supply and laying of 32mm x6mm G.I. earth strip from earth electroded directly in the ground level as required on surface or in recess including cost of Gl saddle/Al. Alloy/cadmium/PVC fastener etc.plated iron screw etc. as required for connections. (5M for each) 56 S/B of 40 mm dia x 4.5 mtr. long G.I. pipe vertically for earthing having 12 mm dia. Holes spaced 75 mm apart drilled upto 2 mtr, from the bottom complete with earthing lead of no.6 to 8 SWG GI wire in G.I.pipe upto appron upto switch board 30 cm square box with hinged cover masonary enclosure. Funnel of top, alternate layers of charcoal and salt at least 150 mm thick alround etc. as per direction E/I complete in all respect as per drawing UPPWD Sch. No. 701 57 Supply & erection of stay set at 3.5 Metres away from the pole complete with galvanised 19 mm dia x1.80 Metre long stay rod, 30 cm x 30 x 6.3 mm anchor plate, thimble stay clamps, stay insulator, 19 mm 600 mm double screw tightener, 7/3.5 mm G.I. stay wire etc. in 1:3:6 cement concrete complete in all respec 58 S/F of Danger Board for 11kv line 59 Supply & fixing of LED light Strip with driver on street light pole at central verge road no. 1 &2 including cost work T&P men and material complete in all respect. The LED strip should be in tri Colour as red, white and green (each colour 6 mtr.respectively.) With 01 Year warranty against defects/damage/missing. 60 Supply and wiring of sub main with 02 nos.of 2.5 sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of work as directed E/I 61 Fabrication, supply and fixing of work information board in M.S. frame made by 50mm dia Square Pipe of Stainless steel grade SS-304 & 16 mm thick base plate with back supporting of bracing by MS flat of 25x6mm and 2.85 Mtr long supporting leg made from 65mm pipe SS-304 grade with proper grouting arrangement. The board should be Retro reflective type in green color with white letters as required and shall be fixed at a height of 1.2 Meter from ground by providing 0.45x0.45x0.60 Mtr cement concrete stone pad as per drawing enclosed.The Borad Should be installed within 07 day of signing of Contract Boand.) 62 AMC Work for 03 Years (Part-II) Providing operating cum maintenance staff of the entire street light network for routine maintenance of street lighting system, administrative, site office and staff colony etc including dismantling & re fixing of other street lights of UPSIDA with travelling expenses etc. (Electrician cum supervisor 01 nos, electrician 02 nos, helper 04 nos) 63 Supply & fixing 3-Phase, 63A 415V Power Contractor ML-3 type or equel for Automatic Street & High Mast Control Panel in cluding cost of Connection, men and T&P. 64 Supply & fixing steel tubular pole 9.50 Metre long designated 410 SP-39 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect. 65 S&F of 63 amp. 4 pole MCB (10KA cat B) for control panel complete in all respects 66 S&F of 40 amp. double pole MCB (10KA cat B) for control panel complete in all respects 67 Supply & fixing jointing sleeve for Insulated ACSR Weasel conductor for cost of all material, men and T&P 68 Supply and making straight through joint with cast resin compound including ferrules and other joints materials for following size of PVC Insulated and PVC sheathed/XLPE aluminium conductor 16/25/70 sq.mm 3.5 core cable of 1100 v grade complete rates 69 Aviation Lights 70 S&F Annealed tinned Copper flexible soft PVC/Rubber insulated trailing cable of 4.0 sq.mm 5 core in full length suitable upto 30 Mtr height. 71 Supply and fixing of male-female plug socket for 16 meter high mast lighting system complete in all respects. 72 Rewinding/Repairing of 1.5 HP 3 Phase 415V Burnt AC Power Tool Motor with B-Class super enamel Copper wire including dismantling and re-fixing at Original place 73 Gear oil of winch Machine 74 S&F of stainless steel grade AIS1316 steel wire rope set 6-8 mm diameter in full length suitable for 12/16/20/30 Mtr height on existing winch machine including making/modification proper arrangement for installation in existing machine. 75 Supply & fixing Gl lantern carriage made from 50NB ERW Class B Pipe suitable for 16/20/30 mtr lighting fixing including lowering & hoisting of system and all other associated work along with cost of men, material and T&P. 76 Supply & fixing Astronomical time switch L&T/Siemens/C&S or equel brand including cost of connection, material, men and T&P. 77 S&F of 6-32 amp. double pole MCB (10KA cat B) for control panel complete in all respects. 78 S/F of street light junction box made of SMC material complete with 4 way terminal block, cable gland etc. 79 3x1.5 Sq mm PVC insulated copper cable 80 Supply & fixing Sheet steel enclosure for SP/DP MCB with neutral link and earth terminal 81 Painting letters (Pole No.) 2.5cm up to 8.0 cm size complete on Street light Pole/Panel/Other electrical properties under UPSIDA including cost of all material, men and T&P 82 Cleaning & spray painting of ST bend pole and power ST pole (up to safe height) with one coat of red oxide primer and two coat of alum. paint/PU paint as per direction of Engineer incharge including cost of all material, men and Hydraulic crane, other T&P. (Burger/Nerolac/ Asian make) After Two Year. 83 Trimming of tree branch around the street light pole/ST pole/Central Varge for proper illumination & proper disposal of tree branch collecting on trolley or similar moving item including cost of men, trolley, T&P etc. (1000 x 3 Year) 84 Strengthen of Other ST pole foundation by providing new concerting including cost of all material men and T&P. 85 Dismantling & re-grouting of street light/Steel tubler (upto 12 Mtr long) Tilt/sick bend pole in 1:3:6 ratio cement concrete with stone pad including strengthening of pole by providing additional 04 Nos. support of 65x65x6mm or higher size MS angle in suitable length with the help of welding/cutting as per technical specification. 86 Hiring Charge of 80-100 feet expandable street light repairing hydraulic lift, capacity 300 Kg including cost of operator, mounting vehicle and fuel etc. (8 Hrs x 4 day x 36 Month) 87 Cost of material spares, wire, fuses, small accessories, alum. Lug up to 16 sq.mm, small cable gland, insulation tap,plastic tie, screw, nut & bolts, old cloth, cleaning spray and other small associated required for up-gradation work etc. 88 Fabrication, supply and fixing of work information board in M.S. frame made by 50mm dia Square Pipe of Stainless steel grade SS-304 & 16 mm thick base plate with back supporting of bracing by MS flat of 25x6mm and 2.85 Mtr long supporting leg made from 65mm pipe SS-304 grade with proper grouting arrangement. The board should be Retro reflective type in green color with white letters as required and shall be fixed at a height of 1.2 Meter from ground by providing 0.45x0.45x0.60 Mtr cement concrete stone pad as per drawing enclosed.
