|
| 1 | Taking up or down steel tubing 20mm boreand connections including cleaning for refixing or removal to store complete all as specified and directed. |
| 2 | Taking up or down steel tubing 25mm boreand connections including cleaning for refixing or removal to store complete all as specified and directed. |
| 3 | S&F CPVC pipes 20 mm outer diameter of SDR 11 & plain CPVC SDR 11 and fittings as in walls, ceiling, floor, etc. complete all as specified and directed. |
| 4 | S&F CPVC pipes 25 mm outer diameter of SDR 11 & plain CPVC SDR 11 and fittings as in walls, ceiling, floor, etc. complete all as specified and directed. |
| 5 | S&F in repairs 15mm dia Bib tap, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 6 | S&F in repairs 15 mm dia pillar tap, fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly nuts, screwed for iron pipe & fixed complete all as specified and directed. |
| 7 | S & F in repair 15mm dia angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified and directed. |
| 8 | S&F in repair PVC valve less syphonic action type, flushing cistern, low level, white colour, 10 litres capacity with inlet, ball valve, float and handle including bracket, PVC connection pipe of 15 mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 9 | S&F in repair wash hand basin, white flat back of size 550 x 400mm excluding pillar taps but including waste coupling, waste pipe and bracket, PVC connection pipe of 15 mm size with PTMT nuts of length 600mm, etc.including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed. |
| 10 | S&F in repair wash hand basin, white flat back of size 600 x 480mm with pedestal excluding piller taps but including waste cupling, PVC connection of 15 mm dia of length 600 mm dia, waste pipe and bracket etc complete all as specified and directed. |
| 11 | Supply & fixing in repairs vitreous chinaurinal half stall type size (465x355x265) white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including60mm long brass screws pointing around urinal back in cement; fixing flushing cistern with brackets, grating and union including waste pipe and PVC connection pipe of 15 mm size with PTMT nuts of length 600mm, etc complete all as specified and directed. |
| 12 | Supply and fixed in repairs vitreous china squatting pan, Orissa pattern of size 580 mmx440mm white withP or S trap, front or back inlet and integral foot rest ( Excluding flushing cistern and flush pipe) including provision of cement concrete bedding (PCC 1:4:8, type D2) complete all as specified and directed. |
| 13 | S & F in repair vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed. |
| 14 | S & F in repair two way bib taps, 15 mm bore, long body, chromium plated with crutch handle, screwed for iron pipe or forbrass ferrule and fixed complete all as specified and directed. |
| 15 | S & F in repair brasschromium plated wall mixer telephonic with crutch for (division of hand shower) mixing hot and cold water screwed down to CPVC SDR-11 pipe of dia 20 mm complete all specified and directed. |
| 16 | S & F PTMT/PVC bathroom cabinet with mirror of overall size 550 x 350x 120mm including taking down old unserviceable cabinet mirror complete all as specified and directed. |
| 17 | S & F Stainless steel Heavy Duty Health faucet, (brushed and wall mount) including taking down old unserviceablehealth faucet complete all as specified and directed. |
| 18 | S&F in repair 600mm x 450mm PVC frame mirror of selected quality glass, mounted on 6mm thick commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 19 | S&F in repair PVC waste pipe, 32mm dia complete all as specified and directed. |
| 20 | Demolition of cement concrete(un re-inforced) in floors and pavings n. exc. 15 cm thickness above ground floors complete all as specified and directed. |
| 21 | M & L for sunken floor treatment in Toilet/Bathroom with the following:-i)Top of RCC slab in sunken portion includingperipheral beams shall be plastered with 15mmthick in cement mortar 1 : 3 using approved waterproofing compound @ 3% by weight of cement finished even and smooth using extra cement, curved at the junctions. ii)Apply two coats of epoxy resin/polymer modified cementatious coating like brush bond of FOSROK/SIKA/Pedilite or equivalent, both on floor & beams.iii)Sunken slabs to be given 1:20 slope outward and 25mm GI pipe spout with 300 mm projection beyondouter surface of wall shall be provided.iv)Water tightness of sunken portion to be tested by ponding with water for 72 hours. In case there is even a slight mark of seepage, the portion to be treated and ponding shall be carried out again to confirm the water tightness of sunken slab.Note : No cutting in floor/roof slab/beam shall be allowed for passing of pipes & fittings. The stage of water proofing to sunken slab shall be passed by Eng-in-charge/GE. |
| 22 | M&L for PCC 1:5:10 Type E2 (using 40mm graded crushedstone aggregate) as in filling to sunken floor complete all as specified and as directed. |
| 23 | M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick CM 1:6 screed bed for laying of floor finishes complete all as specified and directed. |
| 24 | M&L for glazed ceramic coloured /printed tiles 450x350x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 10mm thick rendering in CM (1:4) on vertical surfaces of wall complete all as specified and directed. |
| 25 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing servicable tiles to store and rubbish of the premises complete all as specified and directed. |
| 26 | Supply, hoisting and fixing in position rotational moulded polyethylene water storage tank, 1000 litres capacity conforming to IS-12701 (1996) (cylindrical vertical with closed top) including inlet, outlet and wash out holes, all as specified in SSR Part-I, of approved make including dismantling of existing tank and removing from the site complete all as specified and directed. |
| 27 | Supply, hoisting and fixing in position rotational moulded polyethylene water storage tank, 500 litres capacity conforming to IS-12701 (1996) (cylindrical vertical with closed top) including inlet, outlet and wash out holes, all as specified in SSR Part-I, of approved make including dismantling of existing tank and removing from the site complete all as specified and directed. |
| 28 | S & F in repairs 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed. (Minimum weight - 210 gms) |
| 29 | S & F in repairs 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed. (Minimum weight - 210 gms) |
| 30 | Supply and fix 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwedboth ends for iron pipe and fixed all as specified and directed. |
| 31 | Taking down soil pipe/ rainwater pipes (any size or pattern) including all fittings (heads, shoes, bends, swan-necks,etc.) including cleaning or refixing(measured overall as fixed along the centre line over fitting and accesories) complete all as specified and directed. |
| 32 | S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including scafolding etc complete all as specified and directed. |
| 33 | S&F for 110mm dia PVC(SWR) bend fixed with rubbering joint, fixed to wall including scaffoldingcomplete all as specified and directed. |
| 34 | S&F for 110mm dia PVC (SWR) branch piece,single (single Y) equal or unequal with access door including scafoldingall as specified and directed. |
| 35 | S&F for 110mm dia PVC (SWR) junction single,(Single T) equal or unequal with access door including scaffoldingall as specified and directed. |
| 36 | M&L for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, including making good disturbed area/surfaces with cement concrete/cement mortar 1:2:4 etc including taking down old unserviceable Nahani/Floor trap complete all as specified and directed. |
| 37 | S & F PVC (SWR) vent cowl 110mm dia complete all as specified and directed. |
| 38 | Supply & fix half round color coated UPVC gutter/runner drop for rain water drain in buildings of size not exceeding 150 mm with firmly attached down spout of suitable size discharging storm water into PVC SWR pipe of 110 mm dia and similar works etc. including taking down old unservicable rain gutter and similar works complete allas specified and directed. Note: The quoted rate shall be deemed to be included of down spouts, drop outlet, Elbow, End cap, Straight connecter, brackets, downspout couple, splash block, out site corner, clamps as required at site as per standard Engineering practice. |
| 39 | M&L for rendering 10mm thick in cement mortar (1:6) internal surfaces on fair faces of brick work or concrete surfaces, making finished even and smooth without using extra cementincluding taking down of cement plaster complete all as specified and directed. |
| 40 | Material and labour for 5 mm thick rendering incement mortar (1:3)on fair faces of exposed/non exposed concrete surfaces such assoffits of slabs, chajja, facia and simillar work including mixing & application of integral water proofing compound as per manufacture instruction and finishing the surfaces fair and even including taking down of cement plaster of any description including racking out joints for key scrubing with water complete all as specified and directed. |
| 41 | Material and labour for two coat of white wash on newly plastered surfaces of wall surface including preparation of new plastered surafaces complete all as specified and directed. |
| 42 | M&L for complete removal of existing treatment and apply two coat of white wash on old wall surfaces complete all as specified and directed. |
| 43 | Taking down chowkats or frames exceeding 1.50 sqm but not exceeding 4.00 sqm with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 44 | Taking down chowkats or frames not exceeding 1.50 sqm with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 45 | Taking down shutters of any description not exceeding 1 sqm each complete all as specified and directed. |
| 46 | Taking down shutters of any description exc 1 sqm but not exceeding 2.0 sqm each complete all as specified and directed. |
| 47 | S&F Pressed steel frames for doors of frame size 105x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete as specified and directed.Note : Filling of hollow portion of frames with PCC (1:3:6) type C1shall be measured and paid separately. |
| 48 | S&F Pressed steel frames for doors of frame size 125x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete as specified and directed.Note : Filling of hollow portion of frames with PCC (1:3:6) type C1shall be measured and paid separately. |
| 49 | Material & labour for PCCtype C1 1:3:6 (20 mm graded stone aggregate) for filling of hollow frame complete all as specified and directed. |
| 50 | S&F Factory made solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelam sheet complete all as specified and directed. |
| 51 | Supply and fix Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelaim Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification complete all as specified and as directed. |
| 52 | S & F well-seasoned 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.Note :The rate quoted are deemed to be inclusive ofmaking good to the disturb surfaces to match the existing surfaces. |
| 53 | S&F second class hard wood 35mm Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars),edges of framing plain, chamfered or roundedfitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified inSSR Part I, Section 8, clause 8.24(a) and fitted to chowkhats complete all as specified and directed. |
| 54 | S&F second class hard wood Plain, framed, panelled 35 mm thick shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of venered particle board medium density, wood particle board with commercial face veneers and fitted to chowkats complete all as specified and directed. |
| 55 | Cleaning water tank of capacity 500 Litre and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and directed. |
| 56 | Cleaning water tank of capacity 1000 Litre and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and directed. |
| 57 | S&F 100 mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 58 | S&F in repair 150 mm long extruded aluminium alloy handles, fabricated type, anodizedcomplete all as specified and directed. |
| 59 | S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 60 | S & F 300 mm long aluminium alloy anodised sliding door bolt with hasp and staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast alumimium alloy and fixed complete all as specified and directed. |
| 61 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc.including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 62 | M&L for 15mm thick rendering in CM (1:4) in two layers mixed with water proofing compound @ 3% by weight of cement in top layer of 5mm thick finishing the surfaces with fair and even without using extra cement including taking down existing plaster of any description complete all as specified and directed.Note: Integral waterproofing compound shall be measured and paid separately. |
| 63 | Supply only Integral waterproofing compound |
| 64 | M&L for rendering 15mm thick in cement mortar (1:6) internal surfaces on other than fair faces of brick work or concrete surfaces complete all as specified and directed. |
| 65 | M&L for preparing surfaces of newly plastered surfaces on walls and applying two coat of distemper oil emulsion on surfaces of walls with putty of 1.0 mm thick wherever required as per direction of Engr-in-charge compelete all as specified and as directed. Note: Material & labour for Wall Putty will be measured and paid seperately. |
| 66 | Material & Labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqmm over newsurfaces complete all as specified and directed. |
| 67 | M&L for preparation of old painted surfaces by washing, rubbing down and stopping of distempered and painted surfaces and applying a coat of distemper oil emulsion on walls surfaces with putty of 1.0 mm thick wherever required as per direction of Engr-in-charge complete all as specified and as directed. Note: Material & labour for Wall Putty will be measured and paid seperately. |
| 68 | Material and labour for 1 mm thick internal wall putty on wall/ceiling complete all as specified and directed. |
| 69 | M&L for preparation of old painted surfaces by washing, rubbing down and stopping of distempered and painted surfaces and applying a coat of distemper oil emulsion on surfaces of ceiling with putty of 1.0 mm thick where ever required as per direction of Engr-in-charge complete all as specified and directed. Note: Material & labour for Wall Putty will be measured and paid seperately. |
| 70 | M&Lfor preparation of old external surfaces of existing treatment by washing, rubbing down and stopping of weather proof paint and painted surfaces of external wall and applying one coat of antifungal paint complete all as specified and directed. |
| 71 | Supply and fix aluminium anodised (powder coated) ventilator frame withside hung Shutter (bottom Half Portion Fixedand top half portion openable shutter with 4.0mm thick frosted glass)including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements, hinges, tower bolt fixed with screws to wall etc. complete andglazing with and including 4 mm thick frosted glass to aluminium frame work using rubber gasket and including stainless steel wire cloth of 0.36 mm dia & average width of aperture 1.40mm with staple or suitable fillets wire mesh fitted with screws and washers etc including aluminium grill of thickness 5mm and opening not exceeding 75mmx75mm etc. with the following section of frame and shutter complete all as specified and directed:-(a) Sections for shutter: 41 x 20 x 1.50 mm thick(b) Section for frame:63.5 X 38.1X 1.53mm thickNote: The quoted rate shall be inclusive of taking down ventilator of any size and any description and making good disturb surfaces to match the existing surface as per existing schedule of finishes. |
| 72 | Supply and fix aluminium anodised (powder coated) Three track sliding window frame with shutters with ( 2 Nos glazed and one wire gauzed shutter) including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements fixed with screws to wall etc. complete andglazing with and including 5 mm thick plain glass to aluminium frame work using rubber gasket and including stainless steel wire cloth of 0.36 mm dia & average width of aperture 1.40mm with staple or suitable fillets wire mesh fitted with screws and washers etc including aluminium grill of thickness 5mm and opening not exceeding 75mmx75mm etc with the following section of frame and shutter complete all as specified and directed:-(a) Sections for shutter:- (i) \"H\" section: 39 x 20 x 1.50 mm thick (ii) \"Interlock\" section: 39 x 20 x 1.50 mm thick(iii) \"Edge & Bottom\" section: 41 x 20 x 1.50 mm thick (b) Section for frame:-(i) Top & Sides: 92 X 29.50X 1.50mm thick(ii) Bottom: 92 X 29.70 X 1.50mm thickNote: The quoted rate shall be inclusive of taking down window of any size and any description and making good disturb surfaces to match the existing surface as per existing schedule of finishes. |
| 73 | Supply & fixing 4mm thick sheet glass, ordinary quality and glazing in square/ rectangle not exceeding 0.50 sqm in each pane with oil putty or aluminium beads fixed to steel etc completeall as specified and directed. |
| 74 | Material and labour for preparation of old wooden surfaces and applying one coat of synthetic enamel paint on wooden surfaces of any description over 10 cm in width or girth not other wise described complete all as specified and directed. |
| 75 | M&L for preparation of old steel surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed |
| 76 | S&F galvanised mildsteelwire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 77 | S&F in repair 20mm dia decorative type tubular curtain rod, chromium plated including decorative brackets complete all as specified and directed. |
| 78 | Material and labour for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer on surfaces of wood of any description over 10 cm in width or girth not other wise described complete all as specified and directed. |
| 79 | Demolition of cement concrete(un-reinforced) of any description and in anypositionnot otherwise specifically provided for etc complete all as specified and directed. |
| 80 | Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15cm thickness (below or above ground level) and removing debries from site of work complete all as directed by the Engineer-in-Charge. |
| 81 | M&L for 75 mm thick cement concrete type C2 1:3:6using 20 mm graded aggregate as in plinth protection finished fair and even with using extra cementcomplete all as specified and directed. |
| 82 | M&L for cement concrete type C2 1:3:6 using 40 mm graded aggregate in surface channels and drains complete all as specified and directed. |
| 83 | Schedule of Credit |
