|
| 1 | Comprehensive maintenanceof Hot Water Plants/Stand alone CHS Plants forchecking the burner Assy, Fuel pumps, injectors Starter, cleaning the outer side coil etc and checking continous electric supply including checking and rectification of electrical fault of Hot WaterBoilers/Stand alone CHS Plantsinstalled at various unit locations at Leh area under AGE E/M -II Sub divn making the plants functional incl Unsv Part Repair/ replacement as required theas per site requirement all as directed by Engr in Charge.Note : - The Unsv spare parts for replacement shall be measured and paid separately under respective items of schedule. |
| 2 | Supply onlyphotocell suitable for 0.35/ 0.5/1.0/1.5 Lakh Kilo/Cal/hr burner complete all as specified and as directed by Engr-in-Charge. |
| 3 | Supply onlyIgnition Transformer electronicl type suitable for0.35/0.5/1.0/1.5 Lakh Kilo/Cal/hr burner rod assy complete all as specified and directed by Engr-in-Charge. |
| 4 | Supply onlysequence controller suitable for 0.35/ 0.5/1.0/1.5 lakh Kilo/Cal/hr burner rod assemblycomplete with all electric connection complete all as specified and directed by Engr-in-Charge. |
| 5 | Supply onlyof thermostat assembly tail type as per existing suitable for 50-300 degree centigrade temperature complete all as specified and directed by Engr-in-Charge. |
| 6 | Supply only temp controller digital type DTC 503 with sensor suitable for 0.35/ 0.5/1.5 lakh kilo/Cal/hr LAL 2.25 burner rod assembly, complete all as specified and directed by Engr-in-Charge. |
| 7 | Supply onlyburner nozzle suitable for 0.35/0.5/1.0/1.5lakh K/Cal/Hr complete all as specified and directed by Engr-in-Charge. |
| 8 | Supply onlyElectrode suitable for burner of capacity 0.35/ 0.5/1.0/1.5lakh K/Cal/Hr complete all as specified and directed by Engr-in-Charge. |
| 9 | Supply onlyoil pressure pump suitable for burner of capacity 0.35/ 0.5/1.0/1.5lakh K/Cal/Hr AS47A, complete all as specified and directed by Engr-in-Charge. |
| 10 | Supply onlydiesel/fuel filter as per existing complete all as specified and directed by Engr-in-Charge. |
| 11 | Supply onlyPush botton type ON/OFF switches as per existing complete all as specified and directed by Engr-in-Charge. |
| 12 | Supply onlyHigh pressure fuel pipe 1.5 mtr as per existing, complete all as specified and directed by Engr-in-Charge. |
| 13 | Supply onlyRotary type switch as per existing model& type,complete all as specified and directed by Engr-in-Charge. |
| 14 | Supply onlyIndicating lamps R/Y/B as per existing complete all as specified and directed by Engr-in-Charge. |
| 15 | Supply only Burner Assembly including fixing the assembly in the existing Hot water Boiler incl making necessary arrangments with all required fixing materials and made functional the Hot water Boiler of Capacity 1.0/1.5 LKCal/Hrcomplete all as directed by the Engr-in-charge. |
| 16 | Supply only Burner Assembly including fixing the assembly in the existing Hot water Boiler/stand alone CHS incl making necessary arrangments with all required fixing materials and made functional the Hot water Boiler/Stand Alone CHS of Capacity 0.5/0.35 LKCal/Hrcomplete all as directed by the Engr-in-charge. |
| 17 | Attending the complaints of Hot Water Plants/Stand alone CHS Plants forchecking the burner Assy , Fuel pumps , injectors Starter etc and checking continous electric supply including checking and rectification of electrical fault of Hot WaterBoilers/Stand alone CHS Plantsinstalled at various unit locations at Leh area under AGE E/M -II Sub divn making the plants functional incl minor repairs where ever required as per site requirement all as directed by Engr in Charge. |
| 18 | Material and Labour for replacement of photocell suitable for 0.35/ 0.5/1.0/1.5 Lakh Kilo/Cal/hr burner complete all as specified and as directed by Engr-in-Charge. |
| 19 | Material and Labour for replacement of Ignition Transformer electronicl type suitable for 0.35/ 0.5/1.0/1.5 Lakh Kilo/Cal/hr burner rod assy complete all as specified and directed by Engr-in-Charge. |
| 20 | Material and Labour for sequence controller suitable for 0.35/ 0.5/1.0/1.5 lakh Kilo/Cal/hr burner rod assemblycomplete with all electric connection complete all as specified and directed by Engr-in-Charge. |
| 21 | Material and Labour for replacement of thermostat assembly tail type as per existing suitable for 50-300 degree centigrade temperature complete all as specified and directed by Engr-in-Charge. |
| 22 | Supply and Fixing temp controller digital type DTC 503 with sensor suitable for 0.35/0.5/1.5 lakh kilo/Cal/hr LAL 2.25 burner rod assembly, complete all as specified and directed by Engr-in-Charge. |
| 23 | Supply and Fixing in replacement of burner nozzle suitable for0.35/ 0.5/1.0/1.5lakh K/Cal/Hr complete all as specified and directed by Engr-in-Charge. |
| 24 | Supply and Fixing in replacement of Electrode suitable for burner of capacity 0.35/ 0.5/1.0/1.5lakh K/Cal/Hr complete all as specified and directed by Engr-in-Charge. |
| 25 | Supply and Fixing inreplacement of oil pressure pump suitable for burner of capacity 0.35/0.5/1.0/1.5lakh K/Cal/Hr AS47A, complete all as specified and directed by Engr-in-Charge. |
| 26 | Material and Labour for replacement of over load relay 10 to 18 amp complete all as specified and directed by Engr-in-Charge. |
| 27 | Material and Labour for replacement of diesel/fuel filter as per existing complete all as specified and directed by Engr-in-Charge. |
| 28 | Material and Labour for replacement of Push botton type ON/OFF switches as per existing complete all as specified and directed by Engr-in-Charge. |
| 29 | Supply and Fixing inreplacement of High pressure fuel pipe 1.5 mtr as per existing, complete all as specified and directed by Engr-in-Charge. |
| 30 | Supply and Fixing inreplacement of Rotary type switch as per existing model& type,complete all as specified and directed by Engr-in-Charge. |
| 31 | Material and Labour for replacement of Indicating lamps R/Y/B as per existing complete all as specified and directed by Engr-in-Charge. |
| 32 | Material and Labour for replacement of Digital type volt meter complete with touch control switch 0-500 volts complete all as specified and directed by Engr-in-Charge. |
| 33 | Material and Labour for replacement of Digital type Amp meter complete with touch control switch and suitable CTs 0-300 Amps complete all as specified and directed by Engr-in-Charge. |
| 34 | Supply and Fixing in replacement 50mm dia Gun-metalglobe or gate valve, with iron wheel head, screwed both ends for iron/GI pipeand fixed complete all as specified and directed by Engr-in-Charge. |
| 35 | Supply and Fixing in replacement40mm dia Gun-metalglobe or gate valve, with iron wheel head, screwed both ends for iron/GI pipeand fixed complete all as specified and directed by Engr-in-Charge. |
| 36 | Supply and Fixing in replacement25 mm dia Gun-metalglobe or gate valve, with iron wheel head, screwed both ends for iron/GI pipeand fixed complete all as specified and directed by Engr-in-Charge. |
| 37 | Material and Labour for replacement of MK I Starter as per existing complete all as specified and directed by Engr-in-Charge. |
| 38 | Supply and Fixing inreplacement of PVC flexible copper multistrandwire 3 core of 6 sqmm as per existing, complete all as specified and directed by Engr-in-Charge. |
| 39 | Supply and Fixing inreplacement of PVC flexible copper multistrandwire 2 core of 6 sqmm as per existing, complete all as specified and directed by Engr-in-Charge. |
| 40 | Material and labour for rewinding of electric motor 3 phase 415 volts of capacity 3/5 HP with superior quality super enameled copper winding wire of appropriate size and gauge as existing including varnishing , cotton tape, PVC sleeves etc, incl dismentling and re-fixing complete all as specified and directed by Engr-in-Charge. |
| 41 | Repair and refixing of electric motor 3 phase 415 volts of capacity 2/3 HP with superior quality super enameled copper winding wire suitable for 0.35/ 0.5/1.0/1.5lakh K/Cal/Hrincl all parts, derusting, cleaning, over hauling, etc for complete replacement of spare parts such as shaft, winding, bearing, stator rotor and all connected items and after replacement, reassemblingof motor and testing complete all as specified and directed by Engr-in-Charge. |
| 42 | Material and Labour for dismantling of burner assembly and removing of side cover of boiler capacity 1.0/1.5 Kilo/Cal/hr and complete serviceing the boiler by using coil shine chemical and removing the complete carbon/oil deposites including repair to coil assembly and servicing, greasing/ replacement of bushing and bearing etc if there is any leakage found or any other repair required at site and reassembling/testing the same complete all as specified and directed by Engr-in-Charge |
| 43 | Material and Labour for dismantling of burner assembly of stand alone CHS and removing of side cover of boiler capacity 0.5/0.35 Kilo/Cal/hr and complete servicing the boiler by using coil shine chemical and removing the complete carbon/oil deposites including repair to coil assembly and servicing, greasing/ replacement of bushing and bearing etc if there is any leakage found or any other repair required at site and reassembling/testing the same complete all as specified and directed by Engr-in-Charge |
| 44 | Supply and Fixing in replacement of Burner Assembly including fixing the assembly in the existing Hot water Boiler incl making necessary arrangments with all required fixing materials and made functional the Hot water Boiler of Capacity 1.0/1.5 LKCal/Hr and testing after completetion complete all as directed by the Engr-in-charge. |
| 45 | Supply and Fixing in replacement of Burner Assembly including fixing the assembly in the existing Hot water Boiler/stand alone CHS incl making necessary arrangments with all required fixing materials and made functional the Hot water Boiler/Stand Alone CHS of Capacity 0.5/0.35 LKCal/Hr and testing after completetion complete all as directed by the Engr-in-charge. |
| 46 | Supply and Fixing in replacement of 40mm bore dia 3 layer PPR Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply all PPR plain & brass threaded polypropylene random fittings laid in trenches all as specified and directed. MAKE- SFMC/ WETFLOW / SAFE |
| 47 | All as per item ser No 46 but of size 50mm bore dia |
| 48 | All as per item ser no 46 but of size 25mm bore dia |
| 49 | All as per item ser No 46 but of size 20mm bore dia |
| 50 | Material and Labour for lagging for 25mm bore diapipes to be used in water supply all round with 40 mm thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 kgs / Cum conforming to IS 9842 and providing chicken mess wire netting 25 guage 20 mm mesh and covered with aluminum foil 0.01 mm. MAKE- K-FLEX |
| 51 | All as per item ser No 50 but for size 40mm dia bore pipes |
| 52 | All as per item ser No 50 but forsize 50mm dia bore pipes |
| 53 | All as per item ser No 50 but for size 20mm diabore pipes |
| 54 | Supply and LayingofXLPE insulated, armoured, heavy duty electric cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 16 Sqmm 2 core laid in trences or passing through pipes.ducts or fixed to walls/poles complete incl taking down old one incl cable cover all as specified. (Earth work, cable protection and sand cushioning shall be measured and paid for separately) |
| 55 | Supply and laying of XLPE insulated, armoured, heavy duty electric cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 35 Sqmm 3.5 core laid in trences or passing through pipes.ducts or fixed to walls/poles complete incl taking down old one incl cable caver all as specified. (Earth work, cable protection and sand cushioning shall be measured and paid for separately) |
| 56 | Excavation in trenches in hard/dense soil, n.exc 1.5 m wide and n. exc 1.5m in depth, for foundation, laying of cable ,etc or for shafts, wells, cesspits, manholes pier holes etc nexc 10 sqm on plan and n exc 1.5 m in depth and getting outall as specified and directed. |
| 57 | Removing ofsurplus excavated material to a distance n. exceeding 50 mtr & depositing where directed at a level n. exceeding 1.5 mtr above the starting point all as specified and directed. |
| 58 | Returning filling in including spreading, leveling, watering & well ramming in layers n. exceeding 25 cm thick all as directed. |
| 59 | Sand cushioning to underground cables 8 cm below the cable before laying & 15 cm above the cable after laying, complete all as specified in clause 19.75 of SSR Part-I, complete all as specified. |
| 60 | Supply and Layingin Replacement of factory made, machine pressed, unreinforced, pre-cast concrete cable cover class LV type-I flate size 250 x 150x40mm , complete all as specified and directed |
| 61 | Laying only oldcable cover class LV type-I flate size 250 x 150x40mm obtained from item No-54 & 55 , complete all as specified and directed |
| 62 | Supply and fixingin replacementof PVC heavy duty vertical type fuel storage tank of 50 Ltrs capacity with necessary connection at bottom for fuel pipe of suitable size complete all as specified and directed |
| 63 | Material and Labour in replacement for under deck insulation with PUF slab includingapplication of cold bitumen on PUF slab, steel wire of size 46 gauge fixed ,for fastening of 60mm PUF slab, suitablefor steel sheet duct of any size all as specified and directed. |
| 64 | Supply and fix exhaust fan (for standalone CHS) steel body AC single Phase. 230V of size 380 m sweep with, blades, and frame and louvers and connecting with flexible three core cable from the ceiling rose including taking down old existing unserviceable exhaust fan complete all as specified and directed. |
| 65 | Supply and fix exhaust fan ( for standalone CHS) steel body AC single Phase. 230V of size 450 m sweep heavy duty with, blades, and frame and louvers and connecting with flexible three core cable from the ceiling rose including taking down old existing unserviceable exhaust fan complete all as specified and directed. |
| 66 | Supply, installation, testing and commissioning ofstandalone oil fired kerosene/ HSD based heating system in replacement of old dameged unit complete with stainless steel heat exchanger chamber consisting of furnace fabricated out of high temperature resistence stainless steel, automatic burner assembly control panel with sequence controller, photocell, for flame failure.HT Transformer electrode fan assembly with motor temperature controller stainless steel reflector, built in fuel oil piping exhaust chimney all housed in powder coated cashing suitable for operator on 50 Hz single phase 230 volt AC Supply capacity 35000 KCal/ Hr:-(a) Heat Output - 35000 KCal/Hr.(b) Hot Air Temp- 40 C(c) Temperature Rise - 90 def C Max(d) Fuel Consumption- 1.75 Ltr/Hr(e) Thermal Efficiency- 80-90 %(f) Electrical Supply -220 Volts 50 Hz(g) Temperature Control - Automatic(h) Fuel -Diesel/ Kerosene(j) Burner- Riello/ Ben-toneMake : ECCO Flame/Flameco/Thermex |
| 67 | Supply, installation, testing and commissioning ofstandalone oil fired kerosene/ HSD based heating system in replacement of old damesed unit complete with stainless steel heat exchanger chamber consisting of furnace fabricated out of high temperature resistence stainless steel, automatic burner assembly control panel with sequence controller, photocell, for flame failure.HT Transformer electrode fan assembly with motor temperature controller stainless steel reflector, built in fuel oil piping exhaust chimney all housed in powder coated cashing suitable for operator on 50 Hz single phase 230 volt AC Supply capacity 50000 KCal/ Hr:-(a) Heat Output - 50000 KCal/Hr.(b) Hot Air Temp- 40 C(c) Temperature Rise - 90 def C Max(d) Fuel Consumption- 1.75 Ltr/Hr(e) Thermal Efficiency- 80-90 %(f) Electrical Supply -220 Volts 50 Hz(g) Temperature Control - Automatic(h) Fuel -Diesel/ Kerosene(j) Burner- Riello/ Ben-toneMake :ECCO Flame/Flameco/Thermex |
| 68 | Supply, installation, testing and commissioning ofstandalone oil fired kerosene/ HSD based heating system in replacement of old damesed unit complete with stainless steel heat exchanger chamber consisting of furnace fabricated out of high temperature resistence stainless steel, automatic burner assembly control panel with sequence controller, photocell, for flame failure.HT Transformer electrode fan assembly with motor temperature controller stainless steel reflector, built in fuel oil piping exhaust chimney all housed in powder coated cashing suitable for operator on 50 Hz single phase 230 volt AC Supply capacity 100000 KCal/ Hr:-(a) Heat Output - 100000 KCal/Hr.(b) Hot Air Temp- 40 C(c) Temperature Rise - 90 def C Max(d) Fuel Consumption- 1.75 Ltr/Hr(e) Thermal Efficiency- 80-90 %(f) Electrical Supply -220 Volts 50 Hz(g) Temperature Control - Automatic(h) Fuel -Diesel/ Kerosene(j) Burner- Riello/ Ben-toneMake :ECCO Flame/Flameco/Thermex |
| 69 | Supply and fix in replacement of Ducting for Hot air blower to roomofany sizewith complete insulation 6 mm thickas per site reqmt complete all as specified and directed by Engr in Charge. |
| 70 | Taking down carefully copper/Aluminum point wiring (Light, Fan, power) complete fitting such as switches, ceiling, regulator, sockets etc removing materials to be store for keeping in safe custody for taking creditand making good disturbed surfaces of walls, floors etc complete all as speciifed and directed by Engr-in-Charge |
| 71 | Material and Labour for Point wirnig for Power point 3 pin switch socket 15 Amp with PVC copper conductor FRLS cable multistrand unsheathed 2.5 Sqmm on independent board incl one run 2.5 Sqmm multistrand PVC copper conductor FRLS cable for earth continuity in and including PVC casing and capping fixed on wall complete all as specified and as directed by Engr in Charge. |
| 72 | Supply and Fixing switch socket combination 2 in 1, 3 pin 5 & 15 Amp flush type Complete all as specified and directed by Engr in Charge. |
| 73 | Supply and Fixing sheet metal enclosure SPN for DBs with 200 Amps bus bar of 4 way 240 volts with blank plate Double Door all as directed by Engr-in-Charge. |
| 74 | Supply and Fixing in replacement of MCB single phase (SP), 6 to 32 Amps 240 Volts C Curve complete all as specified and directed by Engr in Charge. |
| 75 | Supply and fix in replacement of MCB SPN 32 Amp 240 Volts AC ISI marked all as specified and directed by Engr-in-Charge. |
| 76 | Material and Labour in replacement of sub main wiring with 2 runs of FRLSPVCinsulated multistrand, copper conductor cable of size 4 Sqmm along with one run of 4 sqmm FRLS PVCinsulated cable 1100 volts multi stranded copper conductor as earth wire in and including PVC casing & capping completeincl taking down all as speified and directed by Engr in Charge. |
| 77 | Material and Labour for earthing complete with galvanised steel plate electrode 600x600x6.0mm buried directly in the ground vertically to a depth not less than 2.25 mtr with top edge not less than 1.5 mtr beow GL connected to and including GI earth wire 4 mm dia and GI pipe 15mm dia light grade for earthing protection to the extend of max 7.5 mtr connected to the plate by mean of GI bolts and nuts and further to test point by provn of charcoal salt etc complete with all as per SSR electrical plate No-3 Part -1 including PCC chamber in PCC 1:3:6 type C-2 frame cover MS funnel GI wateing pipe including excavation in any strata complete incl taking out of old unsv earthing all as specified and directed by Engr-in-Charge. |
