|
| 1 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) n.exc 1.5 sqmeach |
| 2 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but n.exc 4.00 sqm each |
| 3 | Taking downshutters of any description exc 1.0 sqm but n.exc 2.00 sqm each complete all as specified |
| 4 | Taking downsteel window/ ventilator of any descriptioncomplete all as specified |
| 5 | Demolition of cement concrete(unreinforced) in ground floors and paving n.exc 15 cm thickness (below or above G.L) and rubbish off the premise complete all as specified and directed |
| 6 | Demolition of brickwork or stone/boulder masonry, built in CM or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specified |
| 7 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid and bedded on pointed on any mortar complete all as specified and directed. |
| 8 | Dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles and rubbish off the premise complete all as specified and directed |
| 9 | Taking down cement or cement lime plaster any description on brick or stone wall/ celling including raking out joint , hacking for key scrubbing with water etc complete all as specified and directed |
| 10 | Taking up or down 15mm bore steel tubing and connection including cleaning for refixing or removal to store all as directed. |
| 11 | Taking up or down 20mm bore steel tubing and connection including cleaning for refixing or removal to store all as directed. |
| 12 | Dismantling PVC water tanks of capacity exc. 250 but n. exc. 500 litre capacity complete all as specified and as directed. |
| 13 | Dismantling of 100mm/75mm dia cast iron pipes, in any position from walls, floors or in trenches if required complete all as specified |
| 14 | M&L RCC 1:2:4 type B-1(Nominal mix) using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified |
| 15 | M&L Brick work with sub class B bricks, straight or curved on plan to any radius built in half brick thick walls in CM 1:4 all as specified. |
| 16 | M&L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, brassummers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floor and beams, etc on rough finished surfaces of concrete complete all as specified. |
| 17 | S&F SolidPVC door frame of size 50mm x 47mm made out of 5mm prelam colour PVC sheet reinforced with MS square tube complete all as specified |
| 18 | S&F Factory made solid PVC moulded door shutter, 28 to 30 mm thick (stiles), with 2,4 or 6 raised panel designed with 2 mm thick moulded PVC sheet on front face and 4mm plain colour PVC sheet on back face as per specification complete all as specified |
| 19 | M&L 35 mm thick 2nd class hardwood glazed and skeleton shutter open rebated and prepared to receive glass gauze etc(with sash bar) edges of framing plain chamfered or rounded filled with cut and mitered beads for securing, glass etc size of member of shutter as per specified in SSR Part-I complete all as specified |
| 20 | M&L Aluminium powder coated (powder coated of required colour) three track sliding windows frame top & sides of size 92x31.75x1.50 mm, bottom size 92x31.75x1.50 mm and shutter top & bottom of size 40x18x1.50 mm and sides (handle) of size 40x18x1.50 mm and lock side shutter frame of size 40x18x1.50 mm with rubber gasket, beading and locking arrangement including making good to the disturbed portion complete including stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and fixing 4 mm thick glass with necessary rubber beading gasket etc, one wire mesh shutter and two Nos glass shutter as per drawing No CEAA/STD/01/2010 sheet No 1/1 complete all as specified anddirected |
| 21 | S&F Aluminium window powder coated (required colour to match window colour), louvers type, frame top & bottom of size 31x42x1.50 mm (rectangular tube of size40x20x2 mm(and middle vertical of size 42x46.20x1.50mm section and clip for fixing wire mesh and glass of size 19x17.30x0.90mm thick including stainless steel wire cloth 0.36mm nominal dia of wire and 1.40mm average width of aperture and fixed with stainless steel wire staples with necessary rubber beading, gasket etc all as specified and as directed by Engr-in-Charge. |
| 22 | M&L Aluminium powder coated (required colour to match window colour) grill of 5 mm thick DG-102 as per Drawing No CEAA/TD-144 sheet No 1/1 fixed with H or F channel of décor or equivalent complete all as specified |
| 23 | S&F Aluminium ventilator powder coated (required colour to match window colour), louvers type, frame top & bottom of size 31x42x1.50 mm (rectangular tube of size40x20x2 mm(and middle vertical of size 42x46.20x1.50mm section and clip for fixing wire mesh and glass of size 19x17.30x0.90mm thick including stainless steel wire cloth 0.36mm nominal dia of wire and 1.40mm average width of aperture and fixed with stainless steel wire staples and supply and fixing 4mm thick glass louvers with blades of 100mm heavy duty with necessary rubber beading, gasket etc all as specified and as directed by Engr-in-Charge. |
| 24 | S&F 100 mm long SS butt hinges and fixed to frame with screwed or weldingcomplete all as specified.. |
| 25 | S&F 150mm long aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified... |
| 26 | S&F Aluminium alloy anodized sliding door bolt with haps and staple (bolt type) and fixing clip of sheet cast or extruded section or cast aluminium alloy and fixed length of bolt 250 mm complete all as specified |
| 27 | S&F 150mm longextruded aluminium alloy handles, fabricated type, anodisedcomplete all as specified.. |
| 28 | S&F 150mm long floor door stopper of aluminium body and tongue, with hard drawn steel spring, fixed to bottom of door shutter complete all as specified.. |
| 29 | S&F 25 mm dia stainless steel drapery rod with and including two Nos of bracket/holders suitable for drapery 25 mm dia rods of one window / door openings complete as in repairs all as specified |
| 30 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with aluminium wire staples or teak wood beading for wooden doors etc complete all as specified |
| 31 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with aluminium wire staples or teak wood beading for wooden doors etc complete as in repairs all as specified |
| 32 | S&F Wire netting 1.23mm dia and size of mesh 20mm of galvanised steel wire 1.40mm dia fixed with tinned tacks of wire staples complete all as specified |
| 33 | M&L Aluminium partition made with aluminium anodised section 62.30 x 44.45 x 1.50 mm fixed in wall including provision for receiving glass pane etc and fixing the same with aluminium anodised beading and rubber gasket including 5mm thick glass (black/tinted/plain) and all necessary fittings complete as in partition all as specified and as directed. |
| 34 | M&L Mild steel TMT bars 6-8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified |
| 35 | M&L Framed work as in door frames or gates chowkhats of angle or other section with braces, etc, drilled or welded for MS hinges for fixing of gate or doors other covering and also fastening and fixing complete all as specified |
| 36 | S&F PVC Wall panelling of make:-Sintex or equivalent makes , plastic section for wall panelling having code set of 144 of size 250 mm X 6mm fixed to wall including matching colour and material beading of suitable size complete all as specified and directed. |
| 37 | M&L Elegant tile made of perforated cement fibre composite 595x595/ 295X1195/ 595X1195x5mm covered with absorptive microfiber coating on the front side and Acoustics fibre on the back side, water resistance, fire resistant absorption coefficient upto 0.89 at 160 Hz tested as per ISO 354. The tiles are anti-sag and installed on T24 grid system of 0.6mm thick Main \"T\" length minimum 3000mm, web minimum 35mm to be placed at 600mm centre to centre and secondary cross \"T\" of length 600mm web minimum 35mm inter locked, Wire Support for Main T to be taken at every 1200mm length wise and 600mm width wise, with a backing of 50mm 1000 GSM thick absorb wool tested as per Fire Retardant IS 15061-2002 for excellent results complete all as specified and directed |
| 38 | M&L False ceiling with semi perforated 12 mm thick micro regular edged GRG at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595x595 mm of approved texture, design and patterns having moisture content less than 2% , humidity resistance of 99% , NRCO.50 to 0.75 as per IS 8225:1987 , Non-combustible as per BS 476 (part-4) - 1970 and light reflectance of 85% (minimum) to be laid in truehorizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross-T of size 15x32 mm of length 1200mm and secondary intermediatecross-Tof size 15x32 mm of length 600mm to form grid module of size 600x600 mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 gms per sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rodupto 1000mm length and L-shape level adjusterof size 85x25x2mm. Galvanized iron perimeter wall angle of size 24x24x0.40 mm of length 3000mm to be fixed on periphery wall/ partition withthe help of plastic raw plugs at 450 mm centre to centre and40mm long dry wall wood screws. the work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. |
| 39 | M&L75 mm thick PCC 1:4:8 type D-2 using 40mm graded aggregate as in sub base complete all as specified |
| 40 | M&L 75mm thick cement concrete type C-2 1:3:6 using 40 mm graded aggregate as in plinth protection and finishing cement concrete surface even and smooth without using extra cementincluding provide construction of joint in every 2 mtr to and filled with saw dust complete all as specified and directed |
| 41 | M&LColoured chequered cement concrete tiles 30cmx30cmx25cm thick, set and jointed neat cement slurry and pointed with coloured or grey cement match with pigment, over and including 20mm thick screed bed or bedding layer in cm 1.6 etc, complete all as specified and as directed |
| 42 | M&L Granite work (of any type) 20 mm thick (table rubbed and polished) in steps, risers, door jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 10mm thick CM 1:4 completeall as specified |
| 43 | M&L Non- skid ceramic coloured joint free tiles 7 to 8mm thick (square/ Rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed with 15mm thick in CM 1:6 complete all as specified. |
| 44 | M&L Non- skid ceramic coloured joint free tiles 7 to 8mm thick (square/ Rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38sqm, in as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchover10mm thick backing coat in CM 1:4 complete all as specified. |
| 45 | M&L Non- skid ceramic coloured joint free tiles 7 to 8mm thick (square/ Rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed with 15mm thick in CM 1:6 complete all as specified. |
| 46 | M&L Glazed ceramic coloured digital tiles 450x300mm x 7mm thick invertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing coat in CM 1:4 complete all as specified. |
| 47 | M&L 10mm thick renderingon fair faces of concrete or brick masonry surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed |
| 48 | M&L 15mm thick renderingon fair faces of concrete or brick masonry surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed |
| 49 | M&L 15mm thick renderingin two layers onconcrete or brick masonry surfaces, ,first layer with10 mm thickin CM 1:6and second layer with5 mm thick in CM 1:4 mixed wth WPC at the rate of 3% by weight of cementfinished even and smooth without using extra cementin wallcomplete all as specified and directed |
| 50 | M&L 5 mm thick renderingon ceiling surfaces.in CM 1:3 finished even and smooth without using extra cement complete all as specified and directed |
| 51 | M&Lcomplete removal of existing treatment ofwall surfacesand applying two coats of distemper oil emulsion over a coat of primer over 1mm thick wall care putty complete all as specified . |
| 52 | M&L Preparation ofnew plastered wallsurfaces and applying two coats of distemper oil emulsion over a coat of primer and 3mm thick coat ofwall care putty complete all as specified . |
| 53 | M&L Complete removal of existing treatment of wall surface and applying two coat of weather proof acrylic paint over a coat of primer in old surface of all and filling cracks with white cement etc complete all as specified and as directed. |
| 54 | M&LPreparation ofnew plastered wall surfaces and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 ltr/10sqm over and including priming coat of exterior primer applied @ 0.90 ltr/10sqm complete all as specified |
| 55 | M&L Preparation of oldsurfaces of ceilingand applying two coats of white washcomplete all as specified. |
| 56 | M&L Preparation of new plastered surface of ceiling and applying three coats of white wash complete all as specified |
| 57 | S&F 5mm thick plain sheet glass ordinary quality chamfered edges as in shelves of any size including necessary fixing with height adjustable brackets on wall complete all as specified and directed |
| 58 | M&L Preparation of new wooden painted surfaces of any description over 10cm width or girth not otherwise described and applyingtwo coats of synthetic enamel paintover a coat of primer complete all as specified.. |
| 59 | M&L Preparation of old wooden painted surfaces of any description over 10cm width or girth not otherwise described and applyingtwo coats of synthetic enamel paintcomplete all as specified.. |
| 60 | M&L Preparation of old steel surface of any description over 10cm width or girth not otherwise described and applying and two coats of synthetic enamel paintcomplete all as specified. |
| 61 | S&F 16mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls / ceilingincluding all PP-R plain & brass threaded polypropylene random fittings as required complete all as specified. |
| 62 | S&F 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls / ceiling complete all as specified.including all PP-R plain & brass threaded polypropylene random fittingscomplete all as specified. |
| 63 | M&L Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc, and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting n.exc. 10 cm girth complete all as specified |
| 64 | Re-fixing old 15/20mm dia bore steel water tubing & connection in new or old position fixed to wall, ceiling or laid in floors including necessary cutting & making of new threads for fixing of new fittings such as elbows, sockets, union, reducer, etc as required complete all as specified. |
| 65 | Dismantling water tanks up to 500Ltr capacity , cleaning and removing all scale and dirt, etc from tanks and room mouths of circulating pipe and refixing to same place all as specified and directed. |
| 66 | S&F Rotational moulded water storage tank 500 ltr capacity double layer (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified. |
| 67 | S&F 15mm dia (min weight 142 gms) PVC ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete as in repairs all as specified and as directed |
| 68 | S&F15 mm dia CP bib taps, fancy type cast copper alloy with half turn type capstan heads, screwed down screwed for iron pipe or for brass ferrule and fixed. complete as in repairs all as specified and directed . |
| 69 | S&F S&F Fancy type stop cock15mm dia, chromium plated cast copper alloy with half turn type capstan heads, screwed down screwed for iron pipe or for brass ferrule and fixed complete as in repairs all as specified and directed |
| 70 | S&F 15mm bore two way angle valve cock chromium plated fancy type, screwed down screwed for iron pipe or for brass ferrule and fixed complete as in repairs all as specified and directed . |
| 71 | S&F15 mm dia pillar taps fancy type of chromium Platedbrass withhalf turn type capstan heads screwed down high pressure, with or without lettered hot and cold with long shank, screwed shanks and fly nuts, screwed completeas in repairs all as specified and directed. |
| 72 | S&F 125 mm dia Fancy type CP shower rose complete as in repairs all as specified and directed. |
| 73 | S&F SS soap dish of size 100mm complete as in repairs all as specified and directed |
| 74 | S&F Vitreous china wash basinpedestal type flat back size 550X400 mm white, excluding taps, waste ,chain and plug and chain porcelain stopper but including brackets cutting for and pinning in ends of brackets or erecting stand complete as in repairs all as specified and directed.. |
| 75 | S&F Waste coupling of 32mm dia brass CP for glazed ware sink basins, etc with long screwed shanks and fly nuts flanges end bedded in red lead cement and other end fixed complete as in repairs all as specified |
| 76 | S&F Waste pipe32/40mm dia 90cm long complete as in repairs all as specified and as directed by Engineer-in-Charge |
| 77 | S&F Brass chromium platedtubular towel rail 20 mm dia \"D\" type 60 cm long including brackets/flanges complete as in repairs all as specified |
| 78 | S&F PVC water connection 600 mm long to wash basin of 15mm dia including CP nuts and washers completeall as specified |
| 79 | S&F PVC bath room cabinet with mirror of size 600mmx450mm pasted coloured with mirror shutter and built in shelves, fixed with CP screws, complete asin repair all as specified and as directed |
| 80 | S&F Vitreous china was down water closet pan (pedestal pattern) coloured (including two Nos fixing bolts incl PVC seat cover but excluding flushing cistern and flush pipe) complete including making good to floor with and including fixing of P or S trap, complete as in repairsall as specified and as directed. |
| 81 | S&F CP peg set of four fixed to wooden boards/shutters complete all as specified |
| 82 | S&F 10 litres capacityPVC valve less symphonic action type, flushing cistern, low level, white, with inlet, ball valve float handle including brackets all as specified complete as in repair all as specified and as directed. |
| 83 | S&F Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory overall size 915mm x 460mm bowl size 410mmx 330mmx 160mm with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe. as in repair complete all as specified |
| 84 | S&F Stainless steel plate rack of size 750x600x250mm of approved make complete as in repairs all as specified and directed. |
| 85 | S&F PVC kitchen cabinet made with door frame of size 48x40mm shutter 20mm thick shutter and including 75mm size stainless steel butt hinges complete as in repairsall as specified and directed |
| 86 | S&F CP decorative type SS handles 75mm long fixed to PVC sheet or frame all as directed by Engineer-in-Charge |
| 87 | S&F Magnetic and connected plate to shutter and frame as per sample complete, all as specified and directed |
| 88 | S&F Door seal strips strong rubber weather stripping door at bottom (standard length) complete, all as specified and directed of Make: Seal Plus or equivalent make as approved by GE |
| 89 | S&F Glass corner shelf 12x12 inch wall mount with 5mm thickness with SS railing complete including bolt/bracket for securing to wall complete as in repairs all as specified and as directed |
| 90 | S&F 100mm dia Cast iron soil, waste and vent pipes 1in anylength with or without ears, with cement joints, laid in trenches or in floors complete all as specified |
| 91 | S&F 75mm dia Cast iron soil, waste and vent pipes 1in anylength with or without ears, with cement joints, laid in trenches or in floors complete all as specified |
| 92 | S&F 75mm diacast iron sanitary connections-short connections pipe of length upto 300-450 mm fixed with cement joints, laid in trenches or in floors complete all as specified |
| 93 | S&F 100mm diacast iron sanitary connections-short connections pipe of length upto 300-450 mm fixed with cement joints, laid in trenches or in floors complete all as specified |
| 94 | M&L 75mm dia bends of any type radius diminishing pieces or tapes (larger bore measured)with oval access door etc complete all as specified |
| 95 | M&L 100mm dia bends of any type radius diminishing pieces or tapes (larger bore measured)with oval access door etc complete all as specified |
| 96 | S&F 75mm bore branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified |
| 97 | S&F 100mm bore branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified |
| 98 | S&F 100mm dia CI Cowls complete all as specified and as directed |
| 99 | S&F 75mm dia CI Cowls complete all as specified and as directed |
| 100 | S&F 75 mm dia bore pipe (SWR) single socket in any length rubber joints laid in trenchescomplete all specified |
| 101 | S&F 110mm borePVC (SWR) bends any radius complete all as specified. |
| 102 | S&F 75mm borePVC (SWR) junction single, (single T) equal or unequal any radius with access door complete all as specified. |
| 103 | S&F 75 mm outlet CI Nahni trap plain with grating including jointing with solvent cement completeas in repairs all as specified |
| 104 | M&L Cutting holes into or through brick walls n exc 0.1 sqm built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified |
| 105 | M&L Drilling holes in kitchen platform slab for gas pipe line and making good all as specified and as directed |
| 106 | Taking down carefully old unserviceablecopper/ aluminium point wiring (Light, fan, socket, power and Bell) including fixture and fittings such as switches, sockets, ceiling roses, lamp, holder , regulators, socketslight fittings etc , removing material to store for keeping in safe custody or for taking credit , and making good disturbed surface of walls, floors, etc. complete all as specified |
| 107 | M & L Concealed point wiring in replacement complete with FRLSH PVC insulated /unsheathed stranded copper conductor of wire 1.5 Sqmm , 1100 volt grade , along with one single core of same size stranded copper as continuous earth wire to common earth dolly in and including PVC conduit pipe fitting medium grade of 25 mm dia fixed in concealed surface of wall/ceiling/false ceiling including cutting /chasing in wall as required with ISI mark heavy duty PVC flux boxes suitable for modular plate of required sizes and thickness (factory made) sunk in wall where as required and accessories complete all as specifiedfor the following :- |
| 108 | (a)One light/bell/fan pointcontrolled by one switch complete |
| 109 | (b) One light point controlled by twoway switch |
| 110 | (b) One 3 Pin socket out let 5 Amps on the same board. |
| 111 | (c) One 3 pin socket out let 5 Amps on the independent board. |
| 112 | Ditto- all as per item No.107 above but with cable of size 2.5 Sq mm PVC insulated on independent board for power plug/sockets 15 Amps complete all as specified and directed by Engr in Charge. |
| 113 | S&FSwitch piano, single pole one way 5 Amps 240 volt capacity flush type all as specified. |
| 114 | S&FSwitch piano, single pole two way 5 Amps 240 volt capacity flush type all as specified. |
| 115 | S&F 3 pin 5 Amps Socket outlet , flush type and all as specified and directed. |
| 116 | S&F Bell push piano type, single pole one way 5 Amps 240 volts capacity flush type all as directed |
| 117 | S & FDoor bell ding dong AC 230volts complete all as specified and as directed. |
| 118 | S&F 5 pin, 5 Amps switch & socket combination flush type multipurpose3 pin, 5 Amp flush type universal and all as specified and directed. |
| 119 | S&F3 pin 15 Amps switch socket combination, flush type multipurpose 2 in 1 type (3 pin 5 Amps and 15 Amps) complete all as specified. |
| 120 | S&F Fan regulator electronic step type 230 volts switch /socket type suitable for any type of ceiling fan sweep all as specified and directed. |
| 121 | S& F Ceiling rose with cover plate , 5 Amps surface type 240 volts bakelite three terminal complete all as specified and directed |
| 122 | S&FSheet metal enclosure distribution board, single pole and neutral, AC, 240 volts, 08 way, with 200 Amps rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete as in repairs all as specified |
| 123 | S& MCB, SP 240 volts capacity 5 - 32 Amps current rating, 10KA , 240 Volt breaking capacity complete as in repairs all as specifiedand directed |
| 124 | S&FMCB, SP 240 volts, 40 to 63 Amps capacity complete as in repairs all as specifiedand directed |
| 125 | M&L Concealed sub main wiring of two run with 4 Sqmm single core PVC insulated, FRSH,flexible multi stranded copper conductor cable 1100 volts grade, drawn through and including PVC conduit pipe 25 mm dia medium grade and accessories of suitable size and fixed on concealed surface of wall/ceiling with cutting chases for conduit including one run of 4.0 Sqmm single core PVC insulated, FRLS ,flexible copper cable as earth continuity conductor in green color all as specified and as directed. Note- (a)Two runs of single core cable with one run of earth continuity cable including PVC conduit and its accessories will be measured and paid as one unit). (b)Make goodto disturbed surface of wall and floor with existingas directed by Engr in Charge . |
| 126 | S&F Exhaust fan 300 mm sweep made of steel body AC single Phase. 230Vwith, blades, and frame and louvers including all electrical connection complete all as specified and as directed. |
| 127 | S&F Exhaust fan 300mm sweep made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper windingincluding all electrical connection complete all as specified and as directed. |
| 128 | S & F LED batten fitting along with removable LED Tube 20W, 230 Volt, 6000K, wall /ceiling mounted, LED batten fixed by means of bolts, ABS rotor suitable for single side connections. LED rod having glass material complete having lumen efficacy minimum 100 lm/w,CCT 6500 K, powered by integral constant current driver suitable for 240 V AC with all accessories internally prewired including connecting up with twin core twisted flexible copper conductor cable with suitable size complete as in repairs all as specified |
| 129 | S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete as in repairs all as specified |
| 130 | Taking down of ceiling fan and depositing to MES store yard including replacement 02 core size 0.75 Sqmm copper wire, painting, servicing andand refixing the same on same position after the work iscomplete all as specified and as directed |
| 131 | Taking down of geyser 25 ltr capacity andrefixing the same on same position after the work iscomplete all as specified and as directed. |
| 132 | Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation, / laying of pipe / cable etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft loose soil complete all as specified and directed. |
| 133 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick using excavated soil all as directed |
| 134 | Removal of surplus soil to a distance n. exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point complete all as specified and directed |
| 135 | Labour only boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique/ manually and necessary machine complete all as specified and as directed. |
| 136 | Supply and laying of DWC HDPE pipe of SN4 category conforming to IS 14930 part I and II including accessories like HDPE snap fit coupler with neoprene \"O\" ring of 40 mm size. |
| 137 | Supply and laying or fixing XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured electric power cable (H/D) earthed cable aluminium conductor, 1100 volts grade with stranded for 16 sq. mm, 4.0 core nominal cross section in service connections complete all as specified and directed |
