|
| 1 | Taking down carefully with battens/ PVC surface/ concealed conduit unserviceable copper/ aluminium point wiring (light, fan, socket) complete including fittings such as switches, ceiling roses, pendants, socket etc. and removing unserviceable material from site and making good disturbed surfaces of walls, floors etc. complete all as specified and directed. |
| 2 | Point wiring PVC insulated sheathed multistranded copper conductor FRLS cable using two single core 1.5 Sq.mm including concealed in wall/floor PVC conduit not less than 20 mm as per IS with all fittings such as bends, tee,junction boxes of suitable size including 1.5 Sqmm PVC(FRLS) insulated copper earth continuity conductor connected to common earth dolly and including pressed steel terminal box, provision of 3 mm thick plastic laminated sheet cover for mountingswitches, sockets,fan regulators etc including all necessary wall cutting chasis and making good disturbed surfaces in cement mortar 1:3 and as per existing colour of white wash / paint / OBD / cement base paint complete all as specified and as directed. |
| 3 | All as per item No. 2.00 here-in-before butpoint wiring for one 5Amps socket outlet point on independent boardcontrolled by one single pole, one way switchcomplete all as specified and directed. |
| 4 | All as per item No. 2.00 here-in-before butpoint wiring for one 5Amps socket outlet point on same boardcontrolled by one single pole, one way switchcomplete all as specified and directed. |
| 5 | All as per item No. 2.00 here-in-before butpoint wiring for one bell point controlled by one single pole, one way bell push complete all as specified and directed. |
| 6 | All as per item No. 2.00 here-in-before but point wiring using 2.5 sqmm as main wire & 1.5 Sqmm as continous earth wire, for one 15 Amps socket outlet point on independent boardcontrolled by one single pole, one way switch complete all as specified and directed. |
| 7 | All as per item No. 2 here-in-before but point wiring using 4 sqmm as main wire & 4 Sq mm as continous earth wire, for one 15 Amps socket outlet point on independent boardcontrolled by one single pole, one way switch complete all as specified and directed. |
| 8 | Point wiring PVC insulated unsheathed multistranded copper conductor FRLS cable using two single core 1.5 Sq.mm (nominal area) in the existing conduit medium grade including fittings and accessories, one run of continuoussingle core copper cable of1.5 Sq. mm connecting to common earth dolly, using the existing pressed steel terminal box, provision of 3 mm thick plastic laminated sheet cover for mounting of switches sockets fan regulators etc. & making good to disturbed surface area for the one light/ fan point controlled by one single pole, one way switch complete all as specified. Note :- The quoted rates includes the cutting chasis for conduit and sunken boxes. |
| 9 | All as per item No. 8.00 here-in-before butpoint wiring for one 5Amps socket outlet point on independent boardcontrolled by one single pole, one way switchcomplete all as specified. |
| 10 | All as per item No. 8.00 here-in-before butpoint wiring for one 5Amps socket outlet point on the same boardcontrolled by one single pole, one way switchcomplete all as specified and directed. |
| 11 | All as per item No. 8.00 here-in-before butpoint wiring for one bell point controlled by one single pole, one way bell push complete all as specified and directed. |
| 12 | All as per item No. 8.00 here-in-before but point wiring using 2.5 sqmm as main wire & 2.5Sqmm as continous earth wire, for one 15Amps socket outlet point on independent boardcontrolled by one single pole, one way switch complete all as specified and directed. |
| 13 | All as per item No. 8.00 here-in-before but point wiring using 4sqmm as main wire & 4 Sqmm as continous earth wire, for one 15 Amps socket outlet point on independent boardcontrolled by one single pole, one way switch complete all as specified and directed. |
| 14 | Supply and fix in repair switch piano, flush type, single pole, one way, 5 Amp, 230 volts complete all as specified and directed. |
| 15 | Supply and fix in repair switch Bell push, flush type, single pole, one way, 230 volts complete all as specified and directed. |
| 16 | Supply and fix in repair switch piano, flush type, single pole, one way, 15 Amp 230 volts complete all as specified and directed. |
| 17 | Supply and fix in repair socket outlet multipurpose 3 pin, 5 Amp and 2 pin 5 Amp, flush type, complete all as specified and directed. |
| 18 | Supply and fix in repair Socket outlet multipurpose 3 pin 5 Amp & 15 Amp, flush type, complete all as specified and directed. |
| 19 | Supply and fix in repair ceiling rose, three terminals, PVC/ isolated body, complete all as specified and directed. |
| 20 | Supply and fix in repair Call bell, electric Ding - Dong type (Domestic pattern), 230 volt, single pole, complete all as specified and directed. |
| 21 | Supply and fix in repair Fan regulator electronic, socket type, suitable for 1200mm /1400mm sweep ceiling fan, fixed in repairs, with and including provision of PVC flexible cable of size 1sqmm copper conductor as required, complete all as specified and directed. |
| 22 | Supply and fixing in repair LED Decorative box type batten 1x20Wprewired upto connection block and connecting with three core PVC copper flexible cable of size 1. Sq. mm complete all as specified and directed. |
| 23 | Supply and fixing in repair LED Decorative box type batten 1x9Wprewired upto connection block and connecting with three core PVC copper flexible cable of size 1. Sq. mm complete all as specified and directed. |
| 24 | Supply and fixing in repair LED tube rod 20 watts (retrofit LED tube) energy saving, recess / surface mounted luminaire suitable for fix in the batten fitting 1x18W to 22W, complete all as specified and directed. |
| 25 | Supply and fixing in repairLEDluminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type which provides soft-light and glare free symmetrical illumination suitable for Armstrong/Grid ceiling complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size all as specified and directed .Make-Havells or its equivalent in Crompton/Wipro |
| 26 | Supply and Fix in repair LED 10 watts IP65 rated Inverted Pyramid Tripod type LED Bollard with soft 360 deg light distribution garden light fitting with robust design and efficient light distribution including light fitting fixing and making PCC block foundationand connecting the fittinngs on PCC foundation blockincluding taking out old complete all as specified and directed. |
| 27 | Material and Labour for service cable 16 Sqmm 2 core 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with an inner sheathing of PVC tape and overall PVC sheathed in service connections/perimeter light supply as per site requirement, flat or circular complete all as specified and directed. |
| 28 | Supply and fixing in repair decorative indirect post top for garden & landscape lighting of min 20 watts with IP 65 protection, resistant to impact and corrosion, anti Glare and uniform distribution complete all as specified and directed. |
| 29 | Supply and fix in repair sheet metal enclosure single pole and neutral with a two pin socket and earth plug complete with one MCB single pole and 240V, 20 Amp ‘B’ curve, 10 kA, complete all as specified and directed . |
| 30 | Supply and fix in repair Sheet metal enclosure (DB) single phase & neutral, double door 4 way, 240 volt with 200 Amps rated bus bar & IP 54 protection, complete all as specified and directed. |
| 31 | All as per item No.30.00 here-in-before butDB 8 way complete all as specified and directed. |
| 32 | Supply and fix in repair Sheet metal distribution board TPN, with double door,4 way, 415 volt with 200 Amps rated bus bar & IP 54 protection,complete all as specified and directed by Engineer-in-Charge. |
| 33 | All as per item No.32 here-in-before butDB 8 way complete all as specified and directed. |
| 34 | Supply and fixing Load line TPN vertical distribution board 8 Way double door dust protected powder coated inclusive of busbar, neutral link, blanking plates and having provision of MCCB 4 Pole 100 to 120 Amps as incomer and MCBs SP/TP as outgoing as per IS - 01 No,having IP-43 protection, complete all as specified and directed. |
| 35 | Supply and fixing Load line TPN vertical distribution board 4 Way double door dust protected powder coated inclusive of busbar, neutral link, blanking plates and having provision of MCCB 4 Pole 100 to 120 Amps as incomer and MCBs SP/TP as outgoing as per IS - 01 No,having IP-43 protection, complete all as specified and directed. |
| 36 | Supply & Fixing in repairs MCCB, 4-pole, breaking capacity 16 KA, 415 volts, 125 Amps complete all as specified and as directed. |
| 37 | Supply & Fixing in repairs TPN 100A Breaking capacity 10 KA, 415 volts, complete all as specified and as directed. |
| 38 | Supply & Fixing in repair MCCB, 4-pole, breaking capacity 16 KA, 415 volts, 63 Amps, complete all as specified and as directed. |
| 39 | Supply and fix in repairTPN 63A , breaking capacity 10 KA, \"B\" curve, fixed in repairs, complete all as specified and directed. |
| 40 | Supply and fix in repair MCB 40 Amp, 415 Volt, TP, breaking capacity 10 KA, \"B\" curve, complete all as specified. |
| 41 | Supply and fix in repair MCB 32/ 40 Amp, 230 Volt, SPN, breaking capacity 10 KA, \"B\" curve, fixed in repairs, complete all as specified and directed. |
| 42 | Supply and fix in repair MCB 6 to 40 Amp, 230 Volt, SP, breaking capacity 10 KA, \"B\" curve, complete all as specified and directed. |
| 43 | Material and labour for Sub Main Wiring (in replacement) with two single core 2.5 Sqmm (nominal area) multi stranded copper conductor FRLS PVC insulated and unsheathed colour code cables, drawn in and including PVC conduit of suitable size with and including one run of continuous multi stranded copper conductor 2.5 Sqmm (nominal area) FRLS PVC insulated and unsheathed colour code cable for earth continuity, 1100 volts grade , complete all as specified and directed. Note(s): (i) Two runs of 2.5 Sqmm main cable + one run of 2.5 Sqmm cable for earth continuity and PVC conduit shall be measured as one unit/one Running Metre. |
| 44 | Material and labour for Sub Main Wiring (in replacement) with two single core 4 Sqmm (nominal area) multi stranded copper conductor FRLS PVC insulated and unsheathed colour code cables, drawn in and including PVC conduit of suitable size with and including one run of continuous multi stranded copper conductor 4 Sqmm (nominal area) FRLS PVC insulated and unsheathed colour code cable for earth continuity, 1100 volts grade , complete all as specified and directed. Note(s): (i) Two runs of 4 Sqmm main cable + one run of 4 Sqmm cable for earth continuity and PVCconduit shall be measured as one unit/one Running Metre. |
| 45 | Material and labour for Sub Main Wiring (in replacement) with two single core 6 Sqmm (nominal area) multi stranded copper conductor FRLS PVC insulated and unsheathed colour code cables, drawn in and including PVC conduit of suitable size with and including one run of continuous multi stranded copper conductor 6 Sqmm (nominal area) FRLS PVC insulated and unsheathed colour code cable for earth continuity, 1100 volts grade , complete all as specified and directed. Note(s): (i) Two runs of 6 Sqmm main cable + one run of 6 Sqmm cable for earth continuity and PVCconduit shall be measured as one unit/one Running Metre. Notes:Taking down will be from different location and wiring will be done on location to bring electric meter outside the houses and as specified by engineer in charge. |
| 46 | Disconnecting & taking down complete ceiling fan with blade of any make 1200 mm / 1400 mm sweep from fan hook/ fan box, transporting to local workshop , opening, cutting and taking out complete copper winding , cleaning with kerosene oil /diesel/ terpin oil and dried out, rewindingwith new super enamelled copper wire of suitable size and gauge and number of turns as recommended by the respective manufactures, varnishing and heating the winding including providing paper insulation (cuff/strip type) replacing u/s providing paper insulation (cuff / strip type) replacing u/s / missing spare (bush, bearing, capacity shackle insulator, canopy, nuts , bolts, earthing, screw, upper, socket, CI block , quarter /split pin (top & bottom) , lock nut etc) fixing the stator in rotor properly aligned and resembling ensuring right DOR, speedy and noiseless running and connecting cable and depositing in E/M yard complete all as specified and directed.Note:Bush, bearing, capacitor, with nuts, bolts and sockets shall be measured and paid for separately as supply only. |
| 47 | Supply and fix in repair capacitor 2.50 MFD, 440 Volt AC, 50 Hz plastic body powder filled type complete all as directed. |
| 48 | Supply and fix in repair capacitor 3.15 MFD, 440 Volt AC, 50 Hz plastic body powder filled type complete all as directed. |
| 49 | Supply and fix in repair MS fan clamps with rubber real including nuts and bolts, split pin suitable for ceiling fan 1200 / 1400 mm sweep complete all as directed. |
| 50 | Supply and fix in repair bearing suitable for 1200 / 1400 mm sweep ceiling fan complete all as specified and directed. |
| 51 | Supply and fix in repair bush suitable for 1200 / 1400 mm sweep ceiling fan complete all as specified and directed. |
| 52 | Supply and fix in repair PVC insulated flexible 3 core, 1sqmm size copper conductor cable of size complete all as specified and directed. |
| 53 | Supply & fixing in repair for Mild Steel Down Rod of suitable dia , 45 Cms longwhite orcoloured, compatible to existing ceiling fans of 1200mm or 1400 mm sweepcomplete all as specified and directed. |
| 54 | Disconnecting and taking down ceiling fan of anysweepfor carrying out overhauling such as cleaning ,oiling, lubricating, greasing etc and replacement of minor parts such aswasher, split pins/ blade screw etc and defective parts, if any, and refixing the ceiling fan fan on same location and connecting it properly and testing for noiseless running to the entire satisfaction ofEngineer-in-charge complete all as specified and directed.Note : (i). Defective parts required to be replaced shall be measured and paid for separately as supply only.(ii).Cost of the minor parts i.e.washer, split pins/ blade screw etc deemed to be included in unit rate & nothing shall be paid on this account. |
| 55 | Material and Labour Spray painting of ceiling fan 1200/1400 mm sweep and testing at site full load with super enamelled heat resistant synthetic white paint duly filling the cavities with filler complete all as specified and directed. |
| 56 | Disconnecting & taking down (burnt) exhaust fan of any make 300mm sweep transporting to local workshop, opening, cutting and taking out complete copper winding , cleaning with kerosene oil / diesel/ terpin oil and dried out, rewinding with new super enamelled copper wire of suitable size and gauge as recommended by the respective manufactures, varnishing and heating the winding including providing paper insulation (cuff /strip type) replacing u/s / missing spare (bush, bearing , capacity etc) fixing the stator in rotor properly aligned and reassembling ensuring right DOR , speedy and noiseless running and depositing in E/M yard complete all as specified and directed.Note: Bush bearing capacitor shall be measured and paid for separately. |
| 57 | All as per serial item No. 56 here-in-before but exhaust fan 450 mm sweep. |
| 58 | Supply and fix in repaircapacitor 4 MFD, 440 Volt AC, 50 Hz plastic body powder filled type for exhaust fan of 300/400mm sweep complete all as specified and directed. |
| 59 | Supply only bearing suitable for 300 / 400/ 450 mm sweep Exhaust fan complete all as specified and directed. |
| 60 | Material and Labour for Spray painting ofExhaust fan and testing at site full load with super enamelled heat resistant synthetic white paint duly filling the cavities with filler and re-writing the MES number in black paint in appropriate size and shape complete all as specified and directed. (Bush, bearing, capacitor, canopy, shackle insulator with nuts, bolts and sockets will be measured and paid separately). |
| 61 | Collecting unserviceable (burnt) table / cabin fan of any make and sweep up to 450 mm from Internal Elect Section, transporting to local workshop, opening, cutting and taking out complete copper winding, cleaning with kerosene oil / diesel / terpin oil and dried out, rewinding with new super enamelled copper wire of suitable size and gauge as recommended by the respective manufacturers, varnishing and heating the winding including providing paper insulation (cuff / strip type), replacing unserviceable / missing spares (bush, bearing, capacitor etc), fixing the stator in rotor properly aligned and reassembling ensuring right DOR, speedy and noiseless running complete all as specified and directed. |
| 62 | Supply and fixing in repair LED light fitting 1x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed. |
| 63 | Material and labour for cleaning complete solar panel set (36 panel) using soft brush and water solution without scratching the panel complete all as specified and directed. |
| 64 | Material and labour for earthing complete with GI earth plate electrode of size 600mm x 600mm x 6mm thick burried directly in ground vertically (depth of pit not less than 2.25 m below normal ground level), with top edge of earth plate not less than 1.5m below normal ground level, earth plate surrounded from all sides by 15cm thick packed alternate layers of charcoal dust and common salt, earth lead GI wire 4 mm dia by means of bolts, nuts, check-nuts and washers of galvanized iron and of earth wire protected by galvanizediron pipe light grade 15mm bore and water pipe 20 mm bore GI medium grade with funnel and wire mesh complete including excavation and earth work, PCC chamber and cover in cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregatein lieu of CI cover and frame etc allas specified and shown in electrical plate No. 3 of SSR-2009 (Part-I), testing on completion, complete including dismantling of existing earthing all as specified and directed.Note(s) :-(i) RCC pit cover shall be pre-cast of RCC (1:3:6) type C-1, 80mm thick reinforced with XPM not less than 4Kg/Sqm.(ii)PCC chamber shall be constructed 500 mm away from the edge of earth pit.(iii) Rate shall include GI strip and protection pipe of length 7.5m, excess beyond 7.5m length required at site shall be measured and paid separately.(iv)Earth resistance should be less than 1 Ohm. In case the test results are not found below 1 Ohm, complete earthing will be redone without any extra cost to Govt. |
| 65 | Supply and fixing in repair DC distribution box for solar panel capacity upto 5kw complete all as specified and directed. |
| 66 | Supply and fixing in repair AC distribution box for solar panel capacity upto 5kw complete all as specified and directed. |
| 67 | Supply and fixing in replacementelectronic energy meter 3 phasewith LCD display complete all as specified and directed. Make-Cat Part No WR301BC7D10 of L& T or its equivalent in the makes mentioned at Appx \"B\"Note : Old meter shall be deposited inMES Store. |
| 68 | Supply and fixing in replacement electronic energy metersingle phase withLCD display complete all as specified and directed.Make- Cat Part No WM101BC5DL0 of L& T or its equilant in the makes mentioned at Appx \"B\"Note : Old meter shall be deposited inMES Store. |
| 69 | Material and labour for repairing junction box of solar panel complete all as specified and directed.Note: All cost for labour, soldering diode deemed to include in quoted rate |
| 70 | Note: The total amount shall subject to adjustment of credit of Rs 32954.00 for old Materials as per Schedule of Credit |
