Tender For New construction work of community building in village Lakhavati of development block Gursarai. - Clearing of site including labour t&p complete. for Layout 2 Earth work Excavation in trenches for foundation. in ordinary soil (loan clay or sand) including lift up to 1.50 m and lead upto50 m. 3 Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. (Under Floor) as per SI.No. 2.25 (a) 4 Sand filling in foundation trench and floor I/c all complete as directed by engineer in charge 5 Providing and laying in cement concrete 1:4:8 (1cement:4 coarse sand:8 graded stoneaggregate 40 mm nominal size and curing complete, including cost of formwork in foundation and floors. 6 First class brick work in 1:6 cement and coarse sand mortar in foundation including supply of all plants etc. required for proper completion of the work. 7 Centering and shuttering including strutting, propping etc. and removal of form for :column,plinth bend,lintel,sunshade,platform & slab. 8 R.C.C. works with cement approved coarse sand and 20 mmapproved stone aggregatein the proportion 1:1.5:3 (1 cement:1.5 coarse sand : 3 stone aggregate ) excludingsupply of reinforcement and its bending & binding.with binding wire including supply of all materials, labours,T&P for COLUMN 9 R.C.C. works with cement approved coarse sand and 20 mmapproved stone aggregatein the proportion 1:1.5:3 (1 cement:1.5 coarse sand : 3 stone aggregate ) excludingsupply of reinforcement and its bending & binding.with binding wire including supply of all materials, labours,T&P for GRADE/PLINTH BEAM 10 R.C.C. works with cement approved coarse sand and 20 mmapproved stone aggregatein the proportion 1:1.5:3 (1 cement:1.5 coarse sand : 3 stone aggregate ) excludingsupply of reinforcement and its bending & binding.with binding wire including supply of all materials, labours,T&P for LINTEL BAND 11 R.C.C. works with cement approved coarse sand and 20 mmapproved stone aggregatein the proportion 1:1.5:3 (1 cement:1.5 coarse sand : 3 stone aggregate ) excludingsupply of reinforcement and its bending & binding.with binding wire including supply of all materials, labours,T&P for Slab 12 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. 13 First class brick work in 1:4 cement and coarse sand mortar in foundation and plinth including supply of all plants etc. required for proper completion of the work. 14 First class brick work in 1:6 cement and coarse sand mortar in superstructure including supply of all plants etc. required for proper completion of the work. 15 12 mm wall plaster 1:6 cement :coarse sand including cost of allmaterial labour T&P etc.complete. 16 Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. 17 Providing of Pcc with 1:2:4 cement coarse sand and stone aggregate for fixing of hold fast. 18 Providing and fixing ISI marked oxidised M.S sliding door bolts with nute and screws etc. complete 250mm x 16mm 19 Providing and fixing ISI marked oxidised M.S handles conforming to IS: 4992 with necessary screws etc. complete 125 mm 20 Providing and fixing ISI marked oxidised M.S tower bolts black finish (Barrel type) with necessary screws etc. complete 200x10mm 21 Providing and fixing ISI marked oxidised M.S tower bolts black finish (Barrel type) with necessary screws etc. complete 150x10 mm 22 40mm. thick in flooring 1:2:4 cement: coarse sand:20 mm. stone aggregatewith floating coat of neat cement including costof all materials Labour and T & P etc. complete 23 Fixing of glass stripsProviding and fixing glass strips in joints of terrazo/ cement concrete floors.40 mm wide and 4 mm thick 24 pointing the joints with white cement and matching pigment etc., complete. Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS :15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing inwhite cement mixed with pigment of matching shade complete. 25 Providing and laying Ceramic glazed floor tiles as per direction of Engineer in charge laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including pointing the joints with white cement and matching pigment etc, complete. 26 Providing and laying vetrifiedfloor tiles ofrequired size or laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including pointing the joints with white cement and matching pigment etc complete as per direction of Engineer in charge. 27 Providing and applying two coat white cement Based wall care putty of approved make over the plastered wall surface to prepared the surface evev and smooth complete. 28 Finishing walls with two coat acrylic smooth exterior paintof approved shade with in new work applied@ 1.67 litr /10 sqm over and including primimg coat of exterior primer applied @2.20 kg/10 sqm. 29 Distemperingtwo coat with oil bound washable distemper of approved brand and manufactureto give an even shade over and including water thinnnable primimg coat with cement primer. 30 Painting with synthetic enamel painttwo coats of approved brand and manufacture of required colour to give an even shade. 31 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :4.0 mm thick glass panes 32 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes. 33 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 34 Providing and fixing precoated galvanised iron profile sheets size ,shape and pitch of corrugation as approved by Engineer -in-charge)0.50 mm(+0.05%) total coated thickness with zinc coating,120 grams per Sqm. as per IS:277 in 240 mpa steel grade 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns epoxy primer on both side of the sheet should have protective goard filmof 25 microns minimum to avoide scratches during tranportation and should be supplide in single length upto 12 meter or as including cutting sheets to size and shape wherever required. 35 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete. 36 Making of apron drain. 37 Construction of Septic tank 25User. 38 Construction ofsoak pit 2.00 m dia and 2.50 m depth with all respect. 39 Construction of manhole 600x600x450 mm withall respect. 40 Supply and Fixing of 1HP submersible pump with hand pump including boring lowering all material labour and T&P all work complete. For estimate purpose only 41 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 20MM DIA 42 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25MM DIA 43 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply,including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. 20 mm dia 44 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :20MM DIA 45 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :15mm nominal bore 46 Providing and fixing uplasticised P.V.C. connection pipe with brass unions 45 cm length and 15 mm nominal bore 47 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes butwithout fittings and the base support for tank 48 Providing and fixing brass bib cock 15 mmof approved quality prayag or equilent make. 49 Providing and fixing c.p angle valve of approved quality prayag or equilent make. 50 Cutting holes upto 30x30 cm in walls including making good the same : With F.P.S. bricks. 51 Cutting holes upto 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc.and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof. 52 Providing and fixing of C.P. soap disc of approved quality. 53 Making of brickpillars for supply to hold theGI/CI pipe line of 230x230x230mm size including B/w and plaster complete 54 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. 55 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern 56 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern,includingpainting of fittings and brackets, cutting and making good the walls wherever requireWhite Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. 57 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink without drain board 610x510 mm bowl depth 200 mm 58 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 453x357 mm 59 Providing and fixing P.v.c waste and vent pipes of approved make110 mm dia. 60 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 61 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. 62 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 63 Supply and burring of safe Earthing Electrode T-19 (Hot Dip Galvanized),Length up to 2000mm, outer pipe 50mm,inner pipe 25,terminal Dia 12mm,outer GI pipe of 16swg and inner GI pipe of 12swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from clectrode terminal to switch board,cost of 25X3G.I. strip will be extra ) as S.I. NO. 725(A) 64 Supply and fixing of one number 8SWG G.I.wire in 15mm dia G.I. pipe for earthing,laid in ground or in wall duly concealed i/c all comp. as S.I. NO. 721 65 Supply and fixing ofrecess/ Surface/ Pendentmounting round10 to 15 Watt LED Down Lighter having Powder coateddie cast aluminium housing withheat sink, diffuser/ Reflector and driver set complete in all respect.. CAT-AA 66 Providing & fixing ofM.C.B. box 4 way as S.I. NO. 1022 (A) CAT (A) 67 Providing & fixing ofM.C.B. 32 Amp i/c all comp. 68 Providing & fixing of D.P. M.C.B. 40 Ampas S.I. NO. 1010 CAT-A 69 Providing & fixing of LED Tube Light with batten suitable for up to 1X22 watt LED tube light fitting i/c all comp.as S.I. NO. 1413 CAT- AA 70 Providing of CFL / LED BULB 12 WATT 71 Providing & fixing of ceiling fan1200mm dia i/c all comp. 72 Providing & fixing of Exhaust fan (market rate for estimating only) 73 Supply and wiring of submains with 2 nos.4 sq.mm.and 1no.2.5sq.mm PVC insulated Copper conductor cable 74 SupplyingandfixingsuitablesizeGIboxwithmodularplateandcoverinfronton surfaceorinrecess,includingprovidingandfixing6pin5/6&15/16Amodular socket outlet and 15/16 A modular switch, connections etc. as required.
