Tender For Comprehensive Maintenance At Aps Dagshai Under Ge Kasauli; 1.00 Supply and fixing Pre-painted galvalume aluminium “zinc coating trapozoidal steel sheet 0.60mm of approved colour having tensile strength of 550MPa as in roof covering, cladding, in any position or slope upto 15 mtr height, fixed with self tapping screws etc including dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern as in roof coverings, claddings in any position or slope upto 15 mtr of height complete all as specified and as directed. 2.00 Supply and fixing plain galvanised mild steel sheeting 0.63mm thick with grade of zinc coating 275 as in valley gutters, ridges, hips, chimney flashings, drip and straight flashings (length and girth as fixed ), and similar work etc in any position or slope of roof upto 15 mtr height, fixed with self tapping screws for ridges, welded or soldered joints, reveting are provided for valley gutters etc including necessary bending, cutting as per site requirement and dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern as in roof coverings complete all as specified and directed. 3.00 Supply and fixing mild steel sheeting 0.80mm thick factory made nozzles, stop ends, drop ends as in valley gutters and similar work etc in any position or slope of roof upto 15 mtr height, welded or soldered joints, reveting including necessary bending, cutting as per site requirement with necessary fixing arrangement/ jointing with rubber sealant for PVC downwater pipes complete all as specified and directed 4.00 Supplying of high polymer butyl rubber roof waterproofing self adhesive multilayer tape (Thickness not less than 1.5mm composite of Antioxidation film, aluminium foil, 140 Non-woven fabric, high strength butyl glue & release film) and fixing in patches as per manufacturers instructions as in metal roofs, claddings, valley gutters in any position or slope upto 15mtr height complete all as specified and directed. 5.00 Material and labour for surface preparation of existing plain or corrugated steel sheeting, Nainital or similar pattern as in roof coverings, ridges or valley gutters in any position or any slope upto 15mtr height including complete removal of old water proofing treatment of any type in patches and applying 1st & 2nd initial coat of Elephant Shields Liquid Rubber black with non-woven geotextile reinforcement fabric followed by 3rd and final coat after 24 hours of initial application complete as per manufacturers instructions, complete all as specified and directed. 6.00 Material and labour for bitumastic gola, with 80/25 bitumen and coarse sand mixture 1:3 by weight, 8cm x 8cm at the junction of roofing to vertical surfaces etc in any position or slope upto 15mtr height complete all as specified and as directed. 7.00 Material and labour for cement concrete 1:2:4 type B1 (using 20mm graded aggregate) as in copings to stone masonary, roof kerbs or mud stops, rounded or chamfered on edges, cills, steps, seismic and other similar bands, plinths courses, parapets, bed plates, kerbs slightly rounded or chamfered angles and throating, fixing MS hold fast, filing gaps/spaces between wooden/ mild steel member embedded in stone / brick masonry wall etc complete all as specified and directed. 8.00 Material and labour for dismantling false ceiling (fibre, pulp, insulation etc) or insulation boards / slabs/ blankets any thickness including cover fillets and its complete fixing/ hanging attachments etc upto 12 mtr height complete all as specified and directed.Note :- 1. Dismantling is to be done in auditorium hall (existing flooring is stepped) from inside without damaging roof covering etc.2. Rates are inlcusive of arrannging scaffoldings, ladders etc 9.00 Supply and fixing in repairs 40mm thick 2nd class hardwood planks, planed one side, with butt joints and fixed with screws etc to existing floors in patches, including cutting out, piecing, heading joints etc complete all as specified and as directed. 10.00 Taking down eaves gutters and rain water pipes (any size or pattern) including all fitting heads shoes bends swan necks etc, including cleaning or refixing or removal to store ( measured overall as fixed along the centre line over fitting and accessories complete all as specifed and directed. 11.00 Dismantling wrought iron or mild steel work of any description any position not otherwise provided complete all as specified 12.00 Material and labour for mild steel works for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. 13.00 Supply and fixing for mild steel section framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, window guard bars, plain, let in and fixed independently in wooden frames including MS screws, L or T section supports for shelves, sinks etc and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. 14.00 Supply and fixing Hard drawn steel wire fabric weight n.exc 4 kg/Sqm cut to lengths, bent to shape required and shouldered or tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcemnt etc complete all as specified and as directed. 15.00 Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal/ square nut or Mild steel rag or lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised of any size and length as per site requirment etc complete all as specified and directed. 16.00 Supply and fixing 160mm dia PVC (SWR) Pipes, single or double socketed, in any length with rubber ring joints fixed to wall including necessary heavy duty MS clamps, nuts & bolts complete all as specified and as directed. 17.00 Supply and fixing 160mm dia PVC (SWR ) bends (with or without door), elbow etc with rubber ring joints fixed to wall complete all as specified and directed. 18.00 Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc 1.50 sqm each including iron mongries complete all as specified and directed. 19.00 Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm but n.exe 4.0 Sqm each including iron mongries complete all as specified and directed. 20.00 Taking down shutter of any description exe 1 Sq.m but n.exe 2.0 Sqm each complete all as specified and directed. 21.00 Material and labour 2nd class hardwood as in plain, solid straight chowkats and frames wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and as directed 22.00 Supply and fixing Pressed steel frames for doors of size 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc with one coat of priming complete as specified and directed. 23.00 Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directedNote : Rates are included for M.S. hold fast/ lugs or SS dash fasteners. 24.00 Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as specified and directed.(Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 25.00 Supply and fixing 30mm thick factory made Flush shutters (double/single leaf) of BWP grade, solid core construction, with particle board core and plywood face panels commercial type on both sides complete all as specified and directed. 26.00 Supply and fixing 0.9 mm thick decorative laminates type I, or surface finish, colour and pattern as approved with resin or adhesive as in flush shutter doors etc complete all as specified and directed. 27.00 Supply and fixing 35 mm thick 2nd class hard wood partly or fully glazed and skelton shutter open rebated and prepared to receive glass ,gauge etc divided into squares with plain, chamfered or rounded, mitred beads, rebated sash bars any numbers for securing glass, etc or partly with panels of 9mm BWP commercial ply etc with size of members of shutters as specified in SSR Part-I, section 8 clause 8.24(a) or to match with existing shutters etc supplied and fitted to chowkats etc complete all as specified and as directed. 28.00 Supply and fixing 35 mm thick 2nd class hard wood glazed and skelton shutter open rebated and prepared to receive glass ,gauge etc divided into squares with plain, chamfered or rounded, mitred beads for securing glass, etc for windows, ventilators etc are provided with stiles and rails as specified in SSR Part-I, section 8 clause 8.24(b) or to match with existing shutters etc supplied and fitted to chowkats etc complete all as specified and as directed. 29.00 Supply and fixing stainless steel 100 mm long butt hinges medium weight and fixed with stainless steel screws complete all as specified and directed. 30.00 Supply and fixing stainless steel 200mm long barrel tower bolt and fixed with stainless steel screws complete all as specified and as directed. 31.00 Supply and fixing stainless steel 150mm long handles and fixed with stainless steel screws complete all as specified and as directed. 32.00 Supply and fixing stainless steel 200mm long sliding door bolts, plate type, with bolt not less than 15mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete all as specified and directed 33.00 Supply and fixing stainless steel 300mm long sliding door bolts, plate type, with bolt not less than 15mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete all as specified and directed 34.00 Material and labour for taking down cement plaster in patches on brick, stone or concrete surfaces as in walls, roof chimneys, chajjas etc at any height upto 15 mtr in any position or slope including racking out joints, hacking for key scrubbing down with water etc to receive new plaster and rendering 20mm thick in CM (1:4) on stone or brick-work surfaces finished even and fair with @ 200 ml WPC (liquid type) per bag of cement complete all as specified and as directed.Note:-WPC (liquid type) shall be measured and paid separately as supply only. 35.00 Material and labour for taking down cement plaster in patches on brick, stone or concrete surfaces as in walls etc at any height upto 10 mtr including racking out joints, hacking for key scrubbing down with water etc to receive new plaster and rendering 20mm thick in CM (1:6) on stone or brick-work surfaces finished even and smooth (without using extra cement) complete all as specified and as directed. 36.00 Material and labour for taking down cement plaster in patches on brick or concrete surfaces etc at any height upto 10 mtr including racking out joints, hacking for key scrubbing down with water etc to receive new plaster and rendering 10mm thick in CM (1:3) on fair faces of brick work or concrete surfaces as in chajja, ceilings etc finished even and smooth complete all as specified and as directed. 37.00 Material and labour for Preparation of newly plastered surfaces of walls and applying two coat of oil bound distemper of colour to match with existing shade, over a coat of 2mm thick putty in two layers of 1mm each complete all as specified and directed. 38.00 Material and labour for preparation of newly plastered surfaces of wall and applying two coats applying two coats of Exterior emulsion paint (Weather coat) of colour approved by Engr - in- charge, over a coat of 2mm thick putty in two layers of 1mm each and including priming coat of exterior primer over new surfaces. etc complete all as specified and as directed. 39.00 Material and labour for complete removal by mechanical scrapping/sanding of all previously painted (OBD, Lime or Synthetic enamel paint etc) surfaces upto underlying wall plaster, washing and cleaning of all loose dust etc and applying two coats of oil bound distemper of colour approved by Engr-in-charge, over a coat of 2mm thick putty in two layers of 1mm each complete all as specified and directed.Note : Rates are inclusive of filling holes and cracks upto 5mm with white cement before application of putty. 40.00 Material and labour for complete removal by mechanical scrapping/sanding of all previously painted (OBD, Lime or Synthetic enamel paint etc) surfaces in patches n exc 10 sqm each upto underlying wall plaster, washing and cleaning of all loose dust etc and applying two coats of oil bound distemper of colour to match with existing shade on surrounding walls , over a coat of 2mm thick putty in two layers of 1mm each complete all as specified and directed.Note : Rates are inclusive of filling holes and cracks upto 5mm with white cement before application of putty. 41.00 Material and labour complete removal of existing treatment by mechanical scrapping/ sanding of all previously painted (Apex, lime or synthetic enamel paint etc) surfaces upto underlying wall plaster, washing and cleaning of all loose dust etc and applying two coats of Exterior emulsion paint (Weather coat) of colour approved by Engr - in- charge, over a coat of 2mm thick putty in two layers of 1mm each complete all as specified and directed.Note : Rates are inclusive of filling holes and cracks upto 5mm with white cement before application of putty. 42.00 Material and labour for preparation of old painted wooden surfaces (complete removal of existing paint by chemical strippers, heat guns, sanding) of any description over 10cm width or girth as existing doors or windows (panelled, fully or partly glazed skelton shutters) and applying two coats of synthetic enamel paint of approved colour over a coat of pink primer complete all as specified and directed. 43.00 Material and labour for preparation of old painted wooden surfaces of any description and applying two coats of synthetic enamel paint of approved tint etc complete all as specified and directed. 44.00 Material and labour for preparation of old painted steel surfaces of any description and applying two coats of synthetic enamel paint of approved tint etc complete all as specified and directed. 45.00 Material and labour for preparation of new steel surfaces of any description over 10cm in width or girth not other wise described and applying two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed. 46.00 Supply and fixing stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed. 47.00 Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed 48.00 Supply and fixing 4.80 mm thick Sheet glass, ordinary quality and glazing with oil putty or fixing in aluminium shutters/frames in any shape and size complete all as specified and as directed. 49.00 Supply and fixing 4.80 mm thick obscured or frosted glass, ordinary quality and glazing with oil putty or fixing in aluminium shutters/frames in any shape and size complete all as specified and as directed. 50.00 Demolition of PCC in ground floor n exc 15cm thickness below or above ground level and removing rubbish out of MoD land etc complete all as specified and as directed 51.00 Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil including removing the debris out of MoD land complete all as specified and directed. 52.00 Material and labour for PCC 1:4:8 type D2 (using 40mm graded aggregate) as in foundations, sub bases etc including necessary formwork required as per site conditions complete all as specified and directed. 53.00 Material and labour for PCC 1:2:4 type B1 (using 20mm graded aggregate) as in foundations, hardstanding etc including necessary formwork required as per site conditions complete all as specified and directed. 54.00 Material and labour for 75 mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and as directed. 55.00 Material and labour for cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) in surface channels and drains inluding necessary form work as per site condition for providing concrete drains around buildings etc complete all as specified and directed 56.00 Material and labour for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLSH PVC insulated, unsheathed copper conductor cable in and including PVC Casing-n-caping of any size/dia, medium grade fixed on surface of wall complete incl all PVC accessories / fittings, brass screws, washers etc, incl providing 3mm thick plastic laminated sheet top cover for mounting switches/ sockets on boards with suitable size sunk boxes or with PVC gang boxes as per site requirements and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded FRLSH copper conductor cable, unsheathed and connected to common earth and earth dolly including taking down old point wiring and making good the disturbed surfaces with two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed for the followings :- 56.01 One light /Exhaust fan point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed. 56.02 One bell point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed. 56.03 One 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch complete all as specified and directed. 56.04 One 3 pin, 06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch complete all as specified and directed. 56.05 One two way point controlled by two, two way switches 06 Amps complete all as specified and directed. 56.06 All as per serial item No 56.03 here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 3 pin 06 Amps socket outlet point on independent board complete all as specified and directed. 56.07 All as per serial item No 56.03 here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 3 pin 06/16 Amps socket outlet point on independent board complete all as specified and directed. 57.00 Material and labour for point wiring with single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC conduit concealed in walls by making cutting in brick/stone masonry wall of required size with all fittings and accessories, incl sunken boxes and hylem sheet alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly including taking down old point wiring and making good the disturbed surfaces with two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed for the following :- Note : (i) The Switch, sockets shall be mounted on newly provided MS sunken boxes with in and incl 3mm thick hylem sheet of suitable size. (ii) The rate for sunken boxes, hylem sheet and all accessories shall deemed to be included in the quotes rates of the item itself. No seperate payment shall be made in this regard. 57.01 One light / Exhaust fan point controlled by one, one way switch 06 Amps complete all as specified and directed. 57.02 One 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch complete all as specified and directed. 57.03 One 3 pin,06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch complete all as specified and directed. 57.04 All as per serial item No 57.03 here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 3 pin 06 Amps socket outlet point on independent board complete all as specified and directed. 57.05 All as per serial item No 57.03 here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 3 pin 06/16 Amps socket outlet point on independent board complete all as specified and directed. 58.00 Supply and fixing switch piano flush type, 06 Amps single pole, one way 240 volts complete all as specified & directed by Engr-in-Charge 59.00 Supply and fixing switch piano flush type,16 Amps single pole, one way 240 volts complete all as specified & directed by Engr-in-Charge. 60.00 Supply and fixing of socket outlet 3 pin, 06 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed by Engr-in-Charge 61.00 Supply and fixing of socket outlet 3 pin, 06 Amps and 3 pin16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed by Engr-in-Charge 62.00 Supply and fixing bell push flush type , 06 amps , 240 volts complete all as specified & directed by Engr-in-Charge. 63.00 Supply and fixing door bell ding dong type , 240 volts AC complete all as specified & directed by Engr-in-Charge. 64.00 Supply and fixing switch piano flush type, 06 Amps single pole, two way 240 volts complete all as specified & directed. by Engr-in-Charge 65.00 Supply and fixing lamp holder (Angular / Straight), insulated body, with back plate for batten fitting all as specified and directed by Engr-in-Charge 66.00 Supply and fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed by Engineer -in- Charge. 67.00 Material and labour for sub main wiring with 2x4 Sqmm nominal cross sectional area (two single core cable of 4 Sqmm for Phase and neutral + 01 single core cable of 4 Sqmm for earth wire), 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of or casing caping of suitable size as per site requirement, medium grade with all accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. 68.00 -Ditto- all as per item No 67.00 above, but by using two single core cable of 6 Sqmm for Phase and neutral + 1 single core cable of 6 Sqmm for earth wire complete all as specified & directed. 69.00 Supply and fixing in replacement sheet metal enclosure, Double door, SPN, AC, 240 volts, 4 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as directed by Engineer - in - Charge. 70.00 -Ditto- all as per item No 69.00, but of size 08 way, Double door, SPN complete all as specified. 71.00 -Ditto- all as per item No 69.00, but of size 12 way, Double door, SPN complete all as specified. 72.00 Supply and fixing sheet metal enclosure, TPN, AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection with metal double door and flush to wall including all cutting etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces complete all as directed by Engineer - in - Charge. 73.00 Supply and fixing in repairs MCB, SP, AC, 240 volts B curve capacity of 06 to 32 Amps, 10kA and making connections with suitable thimble complete all as specified & directed. 74.00 Supply and fixing in repairs MCB, DP (Double Pole), AC, 240 volts, B curve capacity 20 Amps to 32 Amps 10kA and making connections with suitable thimble complete all as specified & directed. 75.00 Supply and fixing in repairs MCB, DP (Double Pole), AC, 240 volts, B curve capacity 40 Amps to 63 Amps 10kA and making connections with suitable thimble complete all as specified & directed. 76.00 Supply and fixing in repairs Isolator 4 Pole C series 100 amps capacity AC 415 V,10kA complete all as specified and directed. 77.00 Supply and fixing in repairs Isolator 4 Pole C series 63 amps capacity AC 415 V,10kA complete all as specified and directed. 78.00 Material and labour for taking down the unsv geyser of 25/ 50 ltr capacities from the site after disconnecting the water connection, electric connection, opening the geyser assembly and descalling the deposits in the inner container and outlet water pipe set complete all as directed by Engineer-in-Charge. Note:- (i) Replacement of unsv bolts, rubber real, ring nuts, washers to be included in the rate quoted by tenderer. (ii) Material & labour for GI fittings and other connected works shall be measured and paid for separately under respective items of schedule ‘A’ here in after). 79.00 Supply and fixing in repair of geyser syphon assembly steel plate with nuts and bolts, washers, clamps and rubber ring any Make of geyser, for 25/50 ltr capacity of Geysers complete all as specified & directed by Engr-in-Charge. 80.00 Supply and fixing in repair of thermostatic switch 11 long ISI marked complete with electric connection suitable for geyser any Make complete all as specified and directed. 81.00 Supply and fixing in repair of geyser element 1.5 /2.0 KW capacity with rubber ring Round/triangular type complete with clamps, nuts and bolts washers etc for geysers ISI marked (any Make) complete all as specified and directed. 82.00 Supply and fixing Non return valve 15mm dia made of bronze ISI marked heavy duty fixed in repairs complete all as directed by Engineer-in-Charge. 83.00 Supply and fixing in repairs 15mm dia PVC connection 450 mm long , suitable for hot water supply, complete with 2 Nos brass nuts complete all as specified and directed. 84.00 Supply and fixing in repairs 15mm dia PVC connection 450 mm long , suitable for cold water supply, complete with 2 Nos brass nuts complete all as specified and directed. 85.00 Supply and fixing in repairs of Zebra fastner of size 12x100 mm complete all as specified and directed . 86.00 Supply and fixing in Replacement Exhaust Fan 250mm plastic body , 1400 RPM with air delivery 1050 CMH, complete all as specified and directed 87.00 Supply and fixing in Replacement Exhaust Fan 300mm Sweep metal body (Heavy Duty), 1400 RPM with air delivery 1050 CMH, complete all as specified and directed. 88.00 Supply and fixing self ballasted LED Retrofit Bulb 5 Star Bulbs 12 Watt with PBT body shell and PC diffuser. 210 digree wide distruction CCT 6500K, B-22 cap, (Pin type), 230V, PF-0.95 (min) incl dismantling taking out unsv CFL/LED Bulb complete all as specified and as directed. 89.00 Supply and fixing in replacement to existing lamp of any capacity with LED lamp 9/10 watt complete all as specified and directed. 90.00 Supply and fixing in repairs LED mirror light 10W including rod complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed. 91.00 Supply and fixing in repairs of 9/10 W LED bulk head luminairies incl LED light with clear prismatic diffuser,driver holder connecting up with three core flexible copper conductor cable of suitable size including all acessories for fixing on wall all as specified and directed by Engr-in-Charge. 92.00 Supply and fixing in repair LED tube light batten fitting 18/20W, (single Side Connection) including LED Rod including all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed. 93.00 Supply and fixing in repair/replacement to existing tube light fitting of any capacity with LED tube light fitting 18/20W, (single Side Connection) with rechargeable emergency invertor LED batten including all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed. 94.00 Supply and fixing in repair/replacement to existing light fitting of any capacity with recess/surface/suspended mounting 36W Ultra modern designed architectural 2x2 LED luminaire which provides soft-light and glare free symmetrical illumination, including all ace ssories for fixing in fall ceiling/ceiling/in hanging position all as specified and directed by Engr-in-Charge. (As per existing Sample). 95.00 Supply and fixing in Replacement Exhaust Fan 380mm Sweep metal body (Heavy Duty), 1400 RPM with air delivery 1050 CMH, complete all as specified and directed. 96.00 Supply and fixing in repair/replacement of PVC gang box suitable for 6 Amp Socket and 6 Amp switch complete all as per specified and directed 97.00 Supply and fixing in repair/replacement of PVC gang box suitable for 16 Amp Socket and 16 Amp switch complete all as per specified and directed 98.00 Supply and fixing in replacement PVC Plug Top 6 amps complete all as specified and as directed. 99.00 Supply and fixing in replacement PVC Plug Top 16 amps complete all as specified and as directed. 100.00 Supply and fixing (in repairs) 15mm dia 304 grade stainless steel connection pipe 450 mm long , suitable for hot & cold water supply, complete with 2 Nos brass nuts complete all as specified and directed. 101.00 Supply and fixing (in repairs) 15mm dia 304 grade stainless steel connection pipe 900 mm long , suitable for hot & cold water supply, complete with 2 Nos brass nuts complete all as specified and directed. 102.00 Supply and fixing in replacement distribution modular box with mcb protection Execution (pole) 4 Module and including 20 Amps rating MCB, single pole, AC, 240 volts with Specification IS:13032 & IS:8623, Dimension approx 46.5 x 42.8 x 26 Centimeters, PVC Plastic Material, White Color mounting on wall surface, complete all as directed by Engineer - in - Charge. 103.00 Supply and fixing 1100 volts grade heavy duty flat twin core cable PVC insulated with stranded aluminium conductor of size 10.0 sqmm and overall PVC sheathed in service connections suspended by insulating hangers not more than 1.0 metre apart including 4mm suspension GI wire from OH conductor to building incl dismantling taking down unserviceable one all as specified and directed. 104.00 All as per item No. 103.00 here-in-before but 6.0 Sqmm complete all as specified and directed. 105.00 Material and labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.5 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.
