|
| 1 | Excavation in foundation trenches etc., in earth work, lift upto 1.50 Metres stacking the excavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm. layers, when required in to plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres. in Pick work & Jumper work. |
| 2 | Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. So as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in: |
| 3 | Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors etc.upto 200mm. In thickness. |
| 4 | Providing and laying cement concrete 1:3:6 (1cement:3 sand:6 graded stone aggregate 40mm nominal size) excluding cost of centring and shuttering in: Foundations and plinth |
| 5 | Providing and laying cement concrete work 1:1.5:3 (1 cement: 1.5 sand :3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilevers upto floor two level. |
| 6 | Providing mild steel/Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level: Tor Steel |
| 7 | Cement concrete flooring 1:2:4 (1 cement: 2 sand:4 graded stone aggregate 20 mm nominal size)laid in one layer finished with a floating coat of neat Cement. 40 mm thick. |
| 8 | Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement:6 sand: 12 graded stone aggregate 20mm nominal size) at plinth level in Cement Mortar 1:6 (1 cement:6 sand) |
| 9 | 15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement Mortar 1:3 (1Cement:3 Sand). |
| 10 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete :110 mm dia. |
| 11 | Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete: 110 mm dia. |
| 12 | Providing and fixing PVC Cowl 110 mm nominal diametre |
| 13 | Supplying Cast iron cover with out frame for manholes for frame of 500mm internal diameter C.I. cover (medium duty) the weight of cover to be not less than 58kg. |
| 14 | Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws: 40mm thick 2nd Class Deodar Wood |
| 15 | Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete: 250x16mm |
| 16 | Providing and fixing aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. Complete. |
| 17 | 200x10mm |
| 18 | 150x10mm |
| 19 | Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete. |
| 20 | 125mm |
| 21 | 100mm |
| 22 | Precast terrazzo tiles hydraulic compressed 20 mm thick with marble chips of specified sizes laid in floors, treads of steps and landings on a bed of 25 mm average thickness of cement mortar 1:6 (1 cement:6 sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) incliding rubbing and polishing complete with tiles of shade: MEDIUM |
| 23 | Providing and laying marble work (Table rubbed and polished) in flooring 20mm. thick base in cement mortar 1:3(1cement:3sand) including jointing with cement mortar 1:2 (1 white cement:2 marble dust) with an admixure of pigment to match the shade of the marble. 20 mm thick White makrana marble. |
| 24 | Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement: 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete. |
| 25 | Providing and laying Duro stone vetrified tiles (300x300mmx8mm) in grey/coloured of required shade in skirting risers of steps and dados on 12mm thick cement mortar 1:3 (1 cement: 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete |
| 26 | Painting two coats (excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter,sand papering & stoping With white enamel paint. |
| 27 | Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete. |
| 28 | Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of requird shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer |
| 29 | Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor: |
| 30 | 15mm nominal bore |
| 31 | Providing and fixing kitchen sink with C.I. Or M.S brackets, painted white including cutting holes in walls and making good the same but excluding fittings: Vitreous China: 600mm x 450mm x 250mm |
| 32 | Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral \"P\" or \"S\" trap including jointing the trap with soil pipe in cement mortar 1:1(1 cement : 1 sand) (Seat and over to be measured and paid for separately): Angle Indian Universal closet |
