Balance Interior Works Such As Acp Works , Fixing Of Toughened Glass, ,Fixing Of Louvers And Other Allied Works At Bolpur Ib Under Bolpur Division.- 1 Providing and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such grooves filled with foam and silicon sealant etc. complete with all materials (but including the cost of silicon sealant), labour, scaffolding and all other incidental charges complete in all respect as per specification and direction of Engineer-in-charge. (Mode of payment is on finished surface area of ACP)4mm thick (0.50mm Al.+3.0mm LDPE +0.50mm Al. PVDF coating) 2 Labour charge for fabrication and installation of structural Glazing/Curtain Wall made from annodized extruded allooy aluminium sections for the following units:- Structural Glazing made of extruded and annodized alloy aluminium sections, fabrications including cutting to proper shape and size, drilling including cost of brackets, fastener bolt, mullion bolt, nuts & washers, maskin tape, double side adhesieve crosslink foam (used for guard of glazed silicon on sub-frame), tissue paper foam (used as filler between sub-frame and under backing of weather silicon), screws and other necessary hardwares, fixing of glass as per drawing, specification and direction of Engineer-in-Charge. (The rate includes hire charges of all tools and plants, including all incidental charges, adhesieve, joiners such as screw,cleate angle,etc. but excluded the cost of extruded aluminium sections, glass, glazed silicon, weather silicon etc.) 3 Supplying Weather Silicone sealant of approved make and brand for fixing of grove line between the Glasses as per direction of Engineer-incharge. for Structural Glazing/Curtain wall. Weather Silicone sealant for filling the Grove line between Glasses or any other material for facial work 4 Supplying profiles of required section made of Aluminium Alloy Extrusionconforming to IS: 732-1983 and IS: 1285-1975; Anodised with required film thickness and specified colour/natural matt finished conforming toIS: 1868-1983 for fabrication of Structural Glazing, Curtain Wall formed of basic sections of any ISI embossed/certified make and brand as per direction of Engineer-in-charge. ( Payment will be made on finished length of the work). 15 micron colour anodisingStructural glazing /Curtain Wall. Mulion & Transom (Weight @1.819 Kg per Meter) 5 Sub frame for fixing Glass (Weight @0.31 Kg per Meter) 6 Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 ofapproved make and brand fitted and fixed as per design as per approval anddirection of Engineer-in-Charge. [excluding the cost of supporting frame workand teak wood batten/Lipping] (i) 6mm 7 (i) 12mm 8 (i) 19mm 9 Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 asper approved make, brand, finish and thickness with fitting, fixing the same onParticle/MDF / Ply Boards with recommended / approved adhesive with properclipping the sides for better attachment as per direction of Engineer-incharge.The rate includes the cost of labour, adhesive and all incidental chargesthereof.In ground floor Glossy/Matt/Suede excluding surface texture or metallic lustre. ii) Thickness of laminate 1.5 mm 10 ii) Thickness of laminate 1 mm 11 French polishing to wood work including preparing surface (ordinarygloss) a) On new wood work 12 12mm thick coloured / tinted / toughened glass coforming to IS:2553-1992 (Part-II 13 Plaster (to wall, floor, ceiling etc.) with sand and cement mortarincluding rounding off or chamfering corners as directed andraking out joints including throating, nosing and drip course,scaffolding/staging where necessary (Ground floor).[Excludingcost of chipping over concrete surface]ii) With 1:4 cement mortarb) 15 mm thick plaster 14 20 mm thick plaster 15 M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-in- charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1956 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 1957, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. including handling charges of materials for the work complete. Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc.and no seperate payment being made for these items, as per direction of Engineer In Charge. For structural members of specified sections weighing less than 22.5 Kg./m 16 Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. On Steel 17 Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary. On steel or other metal surface :With other than hi-gloss of approved quality -Two coats (with any shade except white) 18 Supplying, fitting&fixingpolycarbonatesheet ofapproved make&brand conformingtoIS:14443-1997andhaving 50 micronUVprotection layerunder co-extrusion technology, FireratingbeingB-s1asperEN13501-1certification, fittedand fixedwith60mmwidealuminiumchannel section topandbottommember indry glazesandwitchsystem, (unitwt. of topandbottommembers: 0.375kg/m&0.69kg/m) of approvedbrandandprofile,EPDMqualityrubbergaskets,antidust tape, endcloserCchanneland75mmlongSelf tapping screwbeing drilled through the centre leg of thebottomsectionwithnuts placedat 300mmapartwithout anywaypuncturingthepolycarbonatesheet,EPDMWasher 16mmdia&3mmthickwasheretccompletestrictlyasper manufacturers specification and direction of Engineer-inCharge. (Payment to be made on area of finished work) . In Roof:- Natural/ Blue/Green/Bronze/Opal/Metallic grey colour c)With 2 wall 10 mm overall thickness (wt.1.70kg/sqm,Ugvalue being 3.1 W/m2K, Min. cold bending radius of 1200 mm) 19 Supplying, fittingand fixingwhitevitreous chinabest qualityapproved makewashbasinwithC.I. bracketson75mmX75mmwoodenblocks,C.P.wastefittingsof32mmdia.,oneapprovedqualitybrassC.P.pillarcockof15mmdia.,C.P.chainwithrubberplugof30mmdia.,approvedqualityP.V.C.wastepipewithC.P.nut32mmdia.,900mmlongapproved quality P.V.C. connection pipe with heavy brass C.P. nut including mendinggoodall damagesandpainting thebracketswith twocoatsof approved paint.(iii) 630 mm X 450 mm size 20 Supplying, fittingand fixingpedestal of approvedmake forwashbasin (white) 21 Supplying,fittingandfixingbestqualityIndianmakemirror5.5mmthick withsilveringasperI.S.I. specificationssupportedonfibreglass frameof any colour, frame size 550 mm X 400 mm 22 Supplying, fitting and fixing towel rail with two brackets (i) 25 mm dia. and 750 mm long 23 Supplying, fitting and fixing of louvers which typically involves a series of horizontal or vertical slats or angled slats. These louvers are often used for ventilation, shading, or decorative purposes. Common materials used for louver texture items include wood, aluminum, PVC, and WPC (wood-plastic) 24 Supplying, fitting and fixing of automatic sensor door. 25 Supplying ,fitting and fixingof headboard cushion fabric filled with foam, feathers, or other padding material.
