|
| 1 | Making lead caulked joints to C,I. S/S pipe and specials as per specification including making lead jointingcaulking, gasketing and testing the joints and supply of lead. Gasket, fire wood, cost and conveyance of all materials required for the work and all labour, T&P, taxes, etc. all complete and testing the pipe as per direction of Engineer-in-charge.(Excluding GST) |
| 2 | 100 mm dia. Lead Joint |
| 3 | 150 mm dia. Lead Joint |
| 4 | 200mm dia. Lead joint |
| 5 | 250mm dia. Lead joint |
| 6 | 300mm dia. Lead joint |
| 7 | 450mm dia. Lead joint |
| 8 | Cleaning of chocked ferrule points ( excluding fittings )& replacing of G.I fittings if necessary as per site condition including earth work excavation and refilling withlabour, T&P checking the pipe line to ensure no leakage on resuming to required pressure with mending good to damages etc. all complete as per direction of Engineer-in-charge.(Excluding GST) |
| 9 | Cleaning of O.H tank of multistoried building, cleaning the deposited silt inside the tanks by aid of pans & vessels & brushing the interior surface by soft brushes using bleaching / surf wash for germ free as per direction with supply of all labour & pumping out water by diesel pump with hire & running charges of pump including cost of fuel & operator scaffolding upto any height if required etc complete as per direction of Engineer-in-charge.(Excluding GST) |
| 10 | Removal/cutting, uprooting of wild growth, unwanted trees etc. from wall surface, chhajjas, Parapets of residential buildings with scaffolding at any height including supply of all labour, materials, T&P etc. all complete as directed by Engineer in-charge. (Considering 6 Qtrs. as a block). (Excluding GST) |
| 11 | Supplying of following PH materials of good quality with ISI markwith all transportation loading & unloading at both ends with all taxes, tollage, royalty etc. Complete & deposited in the section store as per direction Engineer-in-charge.(Excluding GST) |
| 12 | Porcelain hand wash basin (16\" x 22\") |
| 13 | Porcelain standard pedestal for H.W basin |
| 14 | 15mm dia C.P Pillarcock |
| 15 | 32 mm CP waste |
| 16 | 32 mm steel sink waste |
| 17 | 40 mm CP waste |
| 18 | 50mm CP waste |
| 19 | 32mm PVC Waste pipe |
| 20 | 40mm pvc waste pipe |
| 21 | 50mm pvc waste pipe |
| 22 | 15mm Brass stop cock (wt. 450gm) |
| 23 | 20mm dia brass stopcock(wt. 450gm) |
| 24 | 15mmConnection pipe (PVC/CP) |
| 25 | Porcelain kitchen sink (24\" x 18\" X10\" ) |
| 26 | Steel Kitchen Sink (24x18x10)cm |
| 27 | 5mm thick bevelleged plate glass mirror24\" x 18\" size with masonite board and mirror screw. |
| 28 | 50mm G.M.F.W.V |
| 29 | 40mm. G.M.F.W.V |
| 30 | 25MM G.M.F.W.V |
| 31 | 20mm G.M.F.W.V |
| 32 | 15mm G.M.F.W.V |
| 33 | 10 ltr capacity PVC low level cistern |
| 34 | Soap Holder |
| 35 | 100mm dia shower |
| 36 | 20mm dia 60cm long towel rail |
| 37 | C.P Glass self (600x125) with glass |
| 38 | CP self |
| 39 | 150mm/100 mm dia C.I/CP. Grattings |
| 40 | 15mm dia symet ballcock(Rod with ball) |
| 41 | 15mm dia C.Pstopcock |
| 42 | 20mm dia C.P stopcock |
| 43 | 20mm dia C.P concealed stopcock |
| 44 | 15mm dia C.P angle stopcock |
| 45 | 15mm long body C.P. Bib cock |
| 46 | 15mm CP.Bibcock |
| 47 | 15 mm dia Symet bibcock |
| 48 | 15mm dia PVC pillar cock |
| 49 | Cistern washer |
| 50 | PVC washer |
| 51 | Long Flush bend for Cistern |
| 52 | C.P Towel ring |
| 53 | White cement |
| 54 | Lead |
| 55 | Gasket |
| 56 | M-seal |
| 57 | Health faucet |
| 58 | C.P two way bib cock |
| 59 | Hot & Cold 15mm connection pipe |
| 60 | 25 mm GI tank nipple |
| 61 | Basin rack bolt |
| 62 | CP extension piece |
| 63 | Hacksaw blade |
| 64 | Porcelain 23\"IWC ( Orissa Pan) |
| 65 | Porcelain 20\"IWC ( Orissa Pan) |
| 66 | Commode (p-trap)EWC with cover |
| 67 | Commode (s-trap)EWC with cover |
| 68 | commode sheet cover and clamp |
| 69 | 2000 ltrs capacity(PVC-3 core white colour ) |
| 70 | 1000 ltrs Capacity (PVC-3 core white colour ) |
| 71 | Supply of G.I Pipes (Medium Quality)/PVC pipes (Sch-80) of different dia.with ISI mark & specification including transportation, all taxes, tollage, & disposing the materials in site office store with stacking including supplying of all labour, T&P etc complete as per direction of Engineer-in-charge(Excluding GST). |
| 72 | 15mm Dia. G.I pipe |
| 73 | 20mm Dia. G.I pipe |
| 74 | 25mm Dia. G.I pipe |
| 75 | 40mm Dia. G.I pipe |
| 76 | 50mm Dia. G.I pipe |
| 77 | 15mm UPVC Pipe |
| 78 | 20mm UPVC Pipe |
| 79 | 25mm UPVC Pipe |
| 80 | 40mm UPVC Pipe |
| 81 | 50mm UPVC Pipe |
| 82 | Supply of U-PVC fittings of different dia. of Sch-80 as per ISI mark & specification including transportation, all taxes, tollage, & disposing the materials in site office store with stacking including supplying of all labour, T&P etc complete as per direction of Engineer-in-charge(Excluding GST) |
| 83 | 15mm Dia. U-PVC union |
| 84 | 20mm Dia. U-PVC union |
| 85 | 25mm Dia. U-PVC union |
| 86 | 40mm Dia. U-PVC union |
| 87 | 50mm Dia. U-PVC union |
| 88 | 15mm Dia. U-PVC elbow |
| 89 | 20mm Dia. U-PVC elbow |
| 90 | 25mm Dia. U-PVC elbow |
| 91 | 40mm Dia. U-PVC elbow |
| 92 | 50mm Dia. U-PVC elbow |
| 93 | 15mm Dia. U-PVC tee |
| 94 | 20mm Dia. U-PVC tee |
| 95 | 25mm Dia. U-PVC tee |
| 96 | 40mm Dia. U-PVC tee |
| 97 | 50mm Dia. U-PVC tee |
| 98 | 15mm Dia. U-PVCsocket |
| 99 | 20mm Dia. U-PVC socket |
| 100 | 25mm Dia. U-PVC socket |
| 101 | 40mm Dia. U-PVC socket |
| 102 | 50mm Dia. U-PVC socket |
| 103 | 15mm Dia. U-PVC MTA ( Brass Threaded) |
| 104 | 20mm Dia. U-PVC MTA( Brass Threaded) |
| 105 | 25mm Dia. U-PVC MTA( Brass Threaded) |
| 106 | 40mm Dia. U-PVC MTA( Brass Threaded) |
| 107 | 50mm Dia. U-PVC MTA( Brass Threaded) |
| 108 | 15mm Dia. U-PVC FTA( Brass Threaded) |
| 109 | 20mm Dia. U-PVC FTA( Brass Threaded) |
| 110 | 25mm Dia. U-PVC FTA( Brass Threaded) |
| 111 | 40mm Dia. U-PVC FTA( Brass Threaded) |
| 112 | 50mm Dia. U-PVC FTA( Brass Threaded) |
| 113 | 15mm PVC Ball Valve |
| 114 | 20mm PVC Ball Valve |
| 115 | 25mm PVC Ball Valve |
| 116 | 40mm PVC Ball Valve |
| 117 | 50mm PVC Ball Valve |
| 118 | U-PVC Paste |
| 119 | Thread tape |
| 120 | UPVC clamp (15mm to 50mm ) |
| 121 | Supply of G.I fittings of different dia. of medium quality as per ISI mark & specification including transportation, all taxes, tollage, & disposing the materials in site office store with stacking including supplying of all labour, T&P etc complete as per direction of Engineer-in-charge(Excluding GST). |
| 122 | 15mm Dia. G.I socket |
| 123 | 20mm Dia. G.I socket |
| 124 | 25mm Dia. G.I socket |
| 125 | 40mm Dia. G.I socket |
| 126 | 50mm Dia. G.I socket |
| 127 | 20mmG.I. RS. |
| 128 | 25mm G.I. R.S |
| 129 | 40 mm G.I. RS |
| 130 | 50 mm G.I. RS |
| 131 | 50 mm Dia. G.I union |
| 132 | 40 mm Dia. G.I union |
| 133 | 25mm Dia. G.I union |
| 134 | 20mm Dia. G.I union |
| 135 | 15mm Dia. G.I union |
| 136 | 15mm Dia. G.I elbow |
| 137 | 20mm Dia. G.I elbow |
| 138 | 25mm Dia. G.I elbow |
| 139 | 40mm Dia G.I elbow |
| 140 | 50mm Dia G.I elbow |
| 141 | 20mm Gl Reducer elbow |
| 142 | 25mm G.I.Reducer elbow |
| 143 | 40mm G.IReducer elbow |
| 144 | 15mm Dia. G.I tee |
| 145 | 20mm Dia. G.I tee |
| 146 | 25mm Dia. G.I tee |
| 147 | 40mm Dia. G.I tee |
| 148 | 50mm Dia. G.I tee |
| 149 | 50mmG.I. reducer Tee |
| 150 | 20mmG.I reducerTee |
| 151 | 20mm Dia. G.I S.P. |
| 152 | 15mm Dia. G.I S.P. |
| 153 | 25mm Dia. G.I S.P. |
| 154 | 40mm Dia. G.I S.P. |
| 155 | 50mm Dia. G.I S.P. |
| 156 | 15mm Dia. G.I Plug |
| 157 | 20mm Dia. G.I Plug |
| 158 | 35 x 3mm M.S. Screw |
| 159 | Cleaning of sewerage line, septic tanks (Big & small) man hole, I.C., soak-way pit & disposing sewerage sludge & burring in a pre-digged pit near by & closing with local earth with supply of all labour, T&P, pump including hire & running charges of pumps all taxes etc. all complete as per direction of Engineer-in-charge.(Excluding GST) |
| 160 | Man holes |
| 161 | Inspection Chamber |
| 162 | Gresase Chamber |
| 163 | Small size Septic tank |
| 164 | Labour charges for dismantallingof IWC/ EWC/AWC/OWC holes in brick/ conc. work supply of fitting & materials with socket & screw joints including cutting threads to pipe, pipes to length including earth work excavation of all types of soil, required scaffolding & refilling the trench after the work & fixing of pipe line in wall with clamps of providing light barriers with supply of all labour, T&P, taxes etc. all complete as per direction of Engineer-in-charge.(Excluding GST) |
| 165 | Labour charges for fitting & fixing of IWC/ EWC/AWC/OWC holes in brick/ conc. work,making flooringwith CC(1:2:4) and neat cement finish with supply of fitting & materials with socket & screw joints including cutting threads to pipe, pipes to length including earth work excavation of all types of soil, required scaffolding & refilling the trench after the work & fixing of pipe line in wall with clamps of providing light barriers with supply of all labour, T&P, taxes etc. all complete as per direction of Engineer-in-charge.(Excluding GST) |
| 166 | Labour charges for layingof PVC pipes and other PH materials laid on wall or under graund including dismantling , cutting holes in brick/ conc. Work supply of fitting & materials with socketand screw joints including cuttingthreads to pipe, pipes to length including eachworkexcavation of all types of soil,required scaffolding & refilling the trench afterthework andfixing of pipeline in wall with clamps of providing light barriers withsupply ofall labour ,T&P taxes etcall complete as per direction of Engineer in charge(Excluding GST) |
| 167 | Layingof 15mm to 25mm dia pipe |
| 168 | Laing of 40mm to 50mm dia pipe |
| 169 | Supplying the following HCI/PVC pipes and fittings of different dia with ISI mark including loading and unloading at both ends with all cost of materials,labours,T&P,,taxes,royalties etc.All complete as per direction of engineering in charge. (Excluding GST) |
| 170 | 110mmPVC Pipe |
| 171 | 75mm PVC pipe |
| 172 | 110mm PVC door bend |
| 173 | 110mm PVC plain bend |
| 174 | 110mm PVC P trap |
| 175 | 110mm PVC S/J with door |
| 176 | 110mm PVC D/J with door |
| 177 | 110mm PVC offset |
| 178 | 75mm PVC door bend |
| 179 | 75mm PVC plain bend |
| 180 | 75mm PVC S/J with door |
| 181 | 75mm PVC D/J with door |
| 182 | 75mm PVC Cowl |
| 183 | 110mm PVC Cowl |
| 184 | 75mm PVC Clamp |
| 185 | 110mm PVC Clamp |
| 186 | Cement |
| 187 | Bamboo |
| 188 | Engagement of Hydraulic Excavator of 1cum bucket for each work excavation during execution of work including supply of operator,fuel tools and plants etc all completeas directed by engineering in charge.(Excluding GST) |
| 189 | Engagement of chain mounted poclain hydrolic exavator having 2 Cum bucket capacity for deep excavationin slushy soiltowards attending the repair workto water supply pipe line& re-filling after completion of repair work with supply of machinery, POL hire & running charges etc all complete as per direction of Engineer-in-charge.(Excluding GST) |
| 190 | Cement concrete (1:1.5:3) for mionor repairs using 12mm to 20mm size C.B.G. chips for all floors, foundation & plinth etc. of approved quality mixing, hoisting, laying, compacting, curing with cost and supply of all materials, labour, T&P, taxes, tollage, royalties, etc. all complete but excluding GST as directed by Engineer-in-charge.Excluding GST |
| 191 | Supply Tor/TMT steel of Fe-500 confirming to IS-1786 including cutting, straightening, bending, binding & placing the grills in position for RCC works binding the grills with binding wire of 18 to 20 gauge including supply of steel, labour, materials, transportation charges, T&P, taxes, etc. all complete but excluding GST as per the direction of Engineer-in-charge. (NB: No payment shall be made for extra weight than theoretical co-efficient).Excluding GST |
| 192 | 16 MM thick Cement plaster in third floor ( outside)with cement mortar (1:6) proportion, over brick work including racking out the joints, finished smooth to the exposed surface, rounding the corners wherever found necessary including cost & supply of all materials, labour, T&P, staging, scaffolding, watering, curing, taxes, tollage, royalties, etc. complete but excluding cost of GST as per direction of Engineer-in-charge. Excluding GST |
| 193 | Brick work in Fly Ash Bricks of size 25cmx 12cm x 8cm and having crushing strength not less than 75 Kg/Cm² to 99Kg/Cm² with C.M (1:6) including splay/cutting, racking out the joints curing, hoisting, staging at any height with cost and supply of all materials, labour, T&P, taxes, royalties, transportation charges, curing, testing charges etc. all complete but excluding GST as per direction of Engineer-in-charge. Excluding GST |
| 194 | In 3rd floor |
| 195 | In foundation plinth |
| 196 | 25mm. thick A.S. flooring in cement concrete (1:2:4) at 3rd floor using 12mm. and down grade hard black C.B granite chips of approved quality including mixing, hoisting, laying, compacting, curing, finished smooth to the exposed surface with a floating coat of cement punning, rounding the corners where found necessary including cost of supply of all materials, labour, T&P, taxes, tollage, royalties, transportation charges, etc. complete but excluding cost of GST as per direction of Engineer-in-charge. (Repair work). Excluding GST. |
| 197 | Exterior painting two coats to wall surface with acrylic based weather coat paint of approved quality & shade having resistance to Fungus, Fading, including scraping, cleaning, brushing, washing the old paint, as and when required, removing the flakes applying uniformly two coats including cost and supply of all materials, labour, T&P, taxes, transportation, staging, scaffolding, etc. complete but excluding cost of GST as directed by the Engineer-in-charge. Excluding GST. |
| 198 | Supplying fitting fixing of 8mm thick ceramic floor tiles ( premimum Quality 300 x300 mm or 400 x 400 mm size)in 1st floor, treads or steps and landing on 20 mm thick bed of cement mortar 1:4(1cement: 4 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and cleaning complete including supply of all labour material taxes tollage etc all complete but excluding GST as per direction of Engineer in charge. |
| 199 | Removal of sewage & sludge from septic tank and sewage sump by using gully tanker or equivalaent machine and deposing it at designated place with supply of all materials labour, t&p etc all comple as per direction of Engineer-in-charge. (Excluding GST) |
| 200 | Supplying ofLabour for managing day to daywork of residential building at Nuabazar, V-Point & CISF Complex area etc all complete as per direction of Engineer -in- Charge.(Excluding GST)NB:(i)The rate of wages against the Item No.24 should not be qouted less than the minimum wages as approved by the govt. of India/PPA .(ii) EPF and ESI of the contract workers will be paid by the contractor every month. (The payment of EPF& ESI will be reimbursed as per actual on submisison of supporting documents.) |
| 201 | Skilled Labour |
| 202 | Semi-Skilled Labour |
