|
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: A) All kind of Soil. |
| 2 | B) Oridinary Rock. |
| 3 | Providing and laying in position cement concrete of specified grade excludingthe cost of centring and shuttering - Allwork upto plinth level A) 1:5:10 (1 cement:5 fine sand : 10 graded nallah stone aggregate 40mm nominal size) |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: A) 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 5 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with A) 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 6 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level A)1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level A) Cold Twisted Bars |
| 8 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : A) Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 9 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form work for: A)Foundations, footings, bases for columns |
| 11 | B) Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc. |
| 12 | 15mm Cement plaster on the rough side of single or half brick wall of mix: A) 1 : 6 ( 1 cement : 6 coarse sand) |
| 13 | 12mm Cement plaster of mix: A)1 : 6 ( 1 cement : 6 fine sand) |
| 14 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 15 | Steel work welded in built up sections/framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. A) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 16 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. A) Two or more coats on new work |
| 17 | Carriage of the following materials by Mechanical Transport fromsource to site of work incl. loading, unloading and stacking complete :- |
| 18 | Sand from Billawarfor an average lead of 50.00 Km. |
| 19 | Stone aggregate below 40mm nominal sizefrom Billawarfor an average lead of 50.00 Km. |
| 20 | Stone aggregate40mm nominal size and abovefrom Billawarfor an average lead of 50.00 Km. |
| 21 | Bricksfor an average lead of 120 Km. |
| 22 | Carriage of material by head load including loading/unloading and stacking at site complete. |
| 23 | sand for an everage lead of 1.2 km |
| 24 | Stone agg. below 40mmnominal size for an everage lead of 1.2 km |
| 25 | Stone agg 40 mm nominal size and above for an everage lead of 1.2 km |
| 26 | Brick for an everage lead of 1.2 km. |
