House Service Connection Up To Consumer Premises From Newly Laid Di/Hdpe Pipe Line With Hdpe Pipes Of Required Dia. And Necessary Accessories Including Supply, Fitting And Testing Of Water Meter In Zone-A, B & C Within Murshidabad Municipality Under Amrut, murshidabad-West Bengal

House Service Connection up to consumer premises from newly laid DI/HDPE Pipe Line with HDPE pipes of required dia. and necessary accessories including supply, fitting and testing of Water Meter in ZONE-A, B & C Within Murshidabad Municipality under AMRUT 2.0(7176 nos. House connection)- 1 Providing House Service connection from the existing CI/DI/UPVC/HDPE/GI/AC distribution pipeline by supply,fitting & fixing of 10 mm NB BrassFerrule conforming to lS 2692:1989 with latest amendments on the said pipeline with supply, fitting & flxing of all other accessories like saddle piece of required size to fit the existing distribution pipeline, specials, nut & bolts, rubber sheet, washers etc and supply & laying of 20mm OD HDPE (PE100, PN16) pipewith all necessary specials 1.0 metre below (approx.) the ground connecting the ferrule/flow control valve including cutting trenches in all sorts of soil as well dismantling of any hard crust layer/concrete/masonry etc.(average 0.15 cum for each 2154 nos. & Avg. 0.30 cum. for each 5022 nos. of connections respectively.) and filling up trenches as per direction of the Engineer-in-charge and upto a point just inside the premises of the household or as directed by ElC. Supply and installation of a 15mm dia. alloy iron Bib Cock (tested to 21 Kg/cm2) above 1.0 Mtr. from ground, an alloy Stop Cock of 15 mm dia. with brass spindle (tested to 21 Kg/cm2) to be fitted in a position as directed by E.l.C. G.l pipe of TATA make (medium duly) of 2 metre length with all necessary specials to continue from the end of the HDPE pipe & upto 1.0 m. above ground within the premises of household including Supply , Fitting and Fixing of Multi Jet Class- B domestic/commercial water metering system (size 15 mm) strictly conform to IS 779-1994 (with all amendements) or MID with AMR compatibility as perspecification in the NIeB/NIeT with PE meter box andwith NRV valve as specified as per direction of EIC along with periodcial meter readingand submission of reports as mentioned in the scope of work as well as per direction of EIC.Casing Pipe of25mm dia (TATA MAKE GI PIPE MEDIUM DUTY) to be provided by the contractor for crossing of drain if any.All the damages made on the roads, the compound walls etc. for providing House service connection shall have to be restoredby the Plain cement concrete (1:2:4)by the contractor as per direction of EIC.Any damages made on thefloor / PCC / tiled / mosaic etc. shall be restored by the Contractor with Plain Cement Concrete (PCC 1:2:4) and neat cement finish as per direction of EIC.N.B.-GST will be applicable as per Govt.norms 2 Upto 10m length of HDPE pipe from the distribution pipe line 3 Above 10m Upto 20m length of HDPE pipe from the distribution pipe line

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	03-06-2025	TIME EXTENSION	Date	10-06-2025

Refer document

Refer document