Supply Installation Of Pumping Machinery With Allied Works For Newly Sunk Tw Ii At Saharbandhi Village Under Md Bazar Block Under Bolpur Mechanical Division, P.H.E.Dte- 1 Supply, delivery and storage of the following Pumping machinery and electrical accessories at site : 2 5 HP Submersible pumping machinery directly coupled with Set water proof suitable size motor having followingspecification :-Duty condition -233-100 LPM, Head- 55-123 MtrShaft-stainless steel, Impeller- S.S / GM, Outlet Size:50mm ., Motor, Submersible type 3 Ph , 50Hz, 415Volt ± 10% 2900 RPM, Motor must be suitable foroperation with star delta starter/Dol.(Test certificate alongwith characteristic curve should be submitted at thetime of delivery). CORA 7D/25+UMAI100-3.7/22/ others(KSB or approved make) 3 4 Sq. Mm. 3 core copper water proof flat submersible cable1100V PVC insulated & Sheathed with Bare Annealed CopperConductor as per IS:694-2010 (Make: Finolex/ Havells/ Mescab/ Any approved) 4 1.1KV grade 10 sq.mm 4 core XLPE insulatedAluminium armoured cable conforming to IS 7098(Part-I) 1988, with upto date amendments. (Make:Gloster / Approved Vendor list of PHED.) 5 Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed 6 Supply, delivery and storage of the following pipes, valves and specials at site: 7 50 mm dia. UPVC standard type column pipe (cream color) with both side threaded and one end side socketed with registered KPMG. Make: Ashirbad 8 3 Mtr Long 9 50mm dia. CIDF single door swing Non Return Valve, PN 1.0 rating (Conforming to IS:5312)(MOC & TC needed for valve). (Make: Approvedvendor list of PHED) 10 CIDF 90°bend- 1no., CI flanged tee- 1no., blank flange-1no., CI/ MS flanged short piece 0.50 mtr.-1no,CI/ MS flanged pipe 1mtr.- 1 no. etc (as per ISspecification and certification registered) forconstruction of delivery pipe line 11 50 mm dia. CIDF Non-Raising Sluice Valves, PN 1.0 Erating (Conforming to IS:14846) for wash out line.(MOC & TC needed for valve). (Make: Approvedvendor list of PHED) 12 M.S. top and bottom adopter (Best quality) 13 M.S. Suspension clamp 14 M.S. split type 200 mm dia. Top cover 15 Supplying & fixing medium gauge GI Pipe (ISI-Medium) Protection with necessary fittings and jointing metarials as required. 16 Heavy type 200 mm dia./suitable Split type tube well cover with clamping arrangement including supply ofnuts, bolts and washer as per departmental design. 17 Anti snapping safety device for pump set by supplying suitable size of MS angle busket and nylon rope ofrequired length including supplying of nuts, bolts andall other materials. 18 Supply delivery and installation of suitable CRCA enclosure powder coated minimum 2mm thick and suitable for outdoor installation. The enclosure should have sufficient space for installation of main switch, single phase timer for time based operation of pump and illumination arrangement.Following necessary materials to be supplied and fitting within the enclosure1. The Panels will be CNC machine fabricated, Three Phase Royco Engineering make./ Others2. Design: Indoor type, Compartmentalized, Floor mounted, single front. 3. Fabrication –i. Sheet thickness –1.6mm thick CRCA MS sheet for non-load bearing & 2mm for Load bearing members. ii. Gland plate – 2mm thick CRCA MS sheet.iii. Type of sheet metal used - CRCA TATA STEELIUM MAKE & Bhusan 4. Gland plates will be provided detachable and undrilled at bottom. 5. Cable entry will be from bottom. 6. Degree of protection – IP54. 7. Powder coated painting will be done after seven tank processes. Final shade will be RAL 7032. The Specification of the panel will be as per NIET Specification 19 Suitable Kiosk box for cable connection of submersible pump motor set with degree of protection IP 65including suitable legs and 6 Nos. Al. Bus bar for 32Amps and all necessary earthing arrangement andinsulator as per direction of EIC. 20 Making CC foundation for support of the kiosk box after excavating the earth upto a depth of 0.6 Mtr belowthe GL including supply of all materials complete with12 mm thick cement plastering with net cement finishingcomplete as per direction of EIC (size: 3 x 1 x 5) 21 Making platform around the tubewell with supply of brick/concrete (6 ft*6 ft) to suport the projected part of tubewell and foundation for fitting fixing as per suitable brick /concreat support as per direction of EIC. 22 Making wire net fencing of the pump platfrom by supplying and fitting fixing of Galvanised MS Angle of approved quality which will be grouted in the earth by cement concret as per dieection of EIC including an arrangement for a get with lock and key facility as per direction of EIC. 23 Installation of Submersible pumping machinery to newly sunk tubewell along with column pipes (asrequired), top cover, valves, and specials of above withprotection pipe and supply of MS clamp, nut bolt, cablegland socket etc. making inerconnection of the pumpdelivery line to pump collecting main line near tubewellwith supply of all necceasary pipe, reducer/enlarger,GI/MS specials etc. including brick, sand, cement, rodetc and laying & drawing of all actuator cable & cableprotection pipe as required and all to complete the jobincluding all connection & testing commissioning asper direction of EIC. 24 Making earthing arrangement as per following - 25 Excavation of soil for installation of Earth electrode andfilling and ramming for soft soil. 26 Earthing with 50 mm dia Gl pipe 3.64 mm thick x 3.04 Mts.long with TATA-Medium GI pipe with a provisionto connect 25mm X 6mm GI flat strip complete with GIbolts, nuts, washers etc as required. 27 Supplying & fixing of earth Busbar of galvanized (Hot dip) MS flat 25mm X 6mm on wall having clearance of6mm from wall including providing drilled holes on thebusbar complete with GI bolts, nuts, washers, spacinginsulator etc as required. 28 Connecting the equipments body to earth busbarincluding S&F 20mm X 3mm galvanized (Hot dip) MSflat on wall/floor with GI saddles as required andconnection of equipments incld. drilling holes, withbolts, nuts, washers etc as required. 29 Supply and delivery at site of GI octagonal street lightpole conical type 7 mtr. Length, Top dia 70mm, bottomdia 130mm, thick 3mm base plate 220x220x12 mm, foundationbolt M20x 700 with template and anchorplate, bracket single arm bracket 1500mm long on singleside with 48.3 OD GI pipe & internal junction box (6A,SPMCB & 4-Way connector).[Make: Bansal/Utkarsh/PHED Approved] 30 Single arm pole 31 Supply and delivery at site of energy efficient LEDSmart Bright street light fixture with IP66 and IK06protected LM high pressure alluminium di cast housingwith polycarbonate cover capable of delivery standardlumen output as follows .The lens plate should bebolted to the metal core PCB should not be glued . Thedriving current should be more than 700 mA . It shouldhave internal surge protection of minium 4kv , lumen/watt >100, Drivier efficiency > 85% ,PF >0.95,THD<10% 32 Philips BRP033 LED90 CW SLR GR PSU 33 Erection of GI pole of length of 7 meter in RCC(1:2:4) Each foundation of 400x400mm of depth of 1300 mm belowGL and 200 mm just above GL. 4 nos J typefoundation bolt of 20 mm dia and 600 mm long groutedinto RCC foundation as per base plate of pole.Projectedlength of 100 mm also considered for fitting with thebase plate of the pole.There should be a provision oftwo number flexible pvc pipe of 63mm dia for cableentry as per supplied drawing.Also the foundationalong material will be made as per departmental drawingand design 34 Supply and delivery at site of 1.1 KV grade 2 core 4 sq.mm XLPE insulated Al. Ar. Cable Conforming toIS:7098(Part-I) 1988 for outdoor lighting along withmanufactures test certificate.[Make:Gloster/Havells/Polycab/PHEDApproved]Supply of cable as per actual requirement atsite. 35 Fitting fixing above supplied LED light fitting complete with all accessories to be fixed with S&F length of 1.5sqmm PVC insulated single core stranded annealedcopper wire and making connections as requiredcomplete 36 Lowering of 2/3HP submersible pump motor with 120 to 150 column pipe (UPVC 50mm dia.) by using derric arrangement by engaging skilled labour including lowering all cable line as per direction. 37 Making the yield testing of tubewell by using necessary materials i.e. V notch, starter cable, pump motor, column pipe including cariage of all materials, labour charges preparation & submission of reports), Generator set if required to complete the whole works as per direction of EIC. 38 Withdrawing the said installed pump (including above all system) by usoing chain pully derric as per direction and satisfection of EIC. 39 Add GST @ 18% 40 Add Cess @ 1%
